Searcharxiv⌕ Search

arXiv subjects

A. Bhat

Publications and source records attributed to A. Bhat.

101 records · Page 6Linked to original sources

Reconstruction and Measurement of $\mathcal{O}$(100) MeV Energy Electromagnetic Activity from $π^0 \rightarrow γγ$ Decays in the MicroBooNE LArTPC

We present results on the reconstruction of electromagnetic (EM) activity from photons produced in charged current $ν_μ$ interactions with final state $π^0$s. We employ a fully-automated reconstruction chain capable of identifying EM showers of $\mathcal{O}$(100) MeV energy, relying on a combination of traditional reconstruction techniques together with novel machine-learning approaches. These studies demonstrate good energy resolution, and good agreement between data and simulation, relying on the reconstructed invariant $π^0$ mass and other photon distributions for validation. The reconstruction techniques developed are applied to a selection of $ν_μ + {\rm Ar} \rightarrow μ+ π^0 + X$ candidate events to demonstrate the potential for calorimetric separation of photons from electrons and reconstruction of $π^0$ kinematics.

hep-ex↗

First Measurement of Inclusive Muon Neutrino Charged Current Differential Cross Sections on Argon at $E_ν\sim 0.8$ GeV with the MicroBooNE Detector

We report the first measurement of the double-differential and total muon neutrino charged current inclusive cross sections on argon at a mean neutrino energy of 0.8 GeV. Data were collected using the MicroBooNE liquid argon time projection chamber located in the Fermilab Booster neutrino beam and correspond to $1.6 \times 10^{20}$ protons on target of exposure. The measured differential cross sections are presented as a function of muon momentum, using multiple Coulomb scattering as a momentum measurement technique, and the muon angle with respect to the beam direction. We compare the measured cross sections to multiple neutrino event generators and find better agreement with those containing more complete treatment of quasielastic scattering processes at low $Q^2$. The total flux integrated cross section is measured to be $0.693 \pm 0.010 \, (\text{stat}) \pm 0.165 \, (\text{syst}) \times 10^{-38} \, \text{cm}^{2}$.

hep-ex↗

Comparison of νμ-Ar multiplicity distributions observed by MicroBooNE to GENIE model predictions

We measure a large set of observables in inclusive charged current muon neutrino scattering on argon with the MicroBooNE liquid argon time projection chamber operating at Fermilab. We evaluate three neutrino interaction models based on the widely used GENIE event generator using these observables. The measurement uses a data set consisting of neutrino interactions with a final state muon candidate fully contained within the MicroBooNE detector. These data were collected in 2016 with the Fermilab Booster Neutrino Beam, which has an average neutrino energy of 800 MeV, using an exposure corresponding to 5E19 protons-on-target. The analysis employs fully automatic event selection and charged particle track reconstruction and uses a data-driven technique to separate neutrino interactions from cosmic ray background events. We find that GENIE models consistently describe the shapes of a large number of kinematic distributions for fixed observed multiplicity.

hep-ex↗

Design and construction of the MicroBooNE Cosmic Ray Tagger system

The MicroBooNE detector utilizes a liquid argon time projection chamber (LArTPC) with an 85 t active mass to study neutrino interactions along the Booster Neutrino Beam (BNB) at Fermilab. With a deployment location near ground level, the detector records many cosmic muon tracks in each beam-related detector trigger that can be misidentified as signals of interest. To reduce these cosmogenic backgrounds, we have designed and constructed a TPC-external Cosmic Ray Tagger (CRT). This sub-system was developed by the Laboratory for High Energy Physics (LHEP), Albert Einstein center for fundamental physics, University of Bern. The system utilizes plastic scintillation modules to provide precise time and position information for TPC-traversing particles. Successful matching of TPC tracks and CRT data will allow us to reduce cosmogenic background and better characterize the light collection system and LArTPC data using cosmic muons. In this paper we describe the design and installation of the MicroBooNE CRT system and provide an overview of a series of tests done to verify the proper operation of the system and its components during installation, commissioning, and physics data-taking.

physics.ins-det↗

Probing Planck Scale Spacetime By Cavity Opto-Atomic $^{87}$Rb Interferometry

The project of \emph{"quantum spacetime phenomenology"} focuses on searching pragmatically for the Planck scale quantum features of spacetime. Among these features is the existence of a characteristic length scale addressed commonly by effective approaches to quantum gravity (QG). This characteristic length scale could be realized, for instance and simply, by generalizing the standard Heisenberg uncertainty principle (HUP) to a \emph{"generalized uncertainty principle"} (GUP). While usually it is expected that phenomena belonging to the realm of QG are essentially probable solely at the so-called Planck energy, here we show how a GUP proposal containing the most general modification of coordinate representation of the momentum operator could be probed by a \emph{"cold atomic ensemble recoil experiment"} (CARE) as a low energy quantum system. This proposed atomic interferometer setup has advantages over the conventional architectures owing to the enclosure in a high finesse optical cavity which is supported by a new class of low power consumption integrated devices known as \emph{"micro-electro-opto-mechanical systems"} (MEOMS). The proposed system comprises of a micro mechanical oscillator instead of spherical confocal mirrors as one of the components of high finesse optical cavity. In the framework of a bottom-up QG phenomenological viewpoint and by taking into account the measurement accuracy realized for the fine structure constant (FSC) from the Rubidium ($^{87}$Rb) CARE, we set some constraints as upper bounds on the characteristic parameters of the underlying GUP. In the case of superposition of the possible GUP modification terms, we managed to set a tight constraint as $0.999978<λ_0<1.00002$ for the dimensionless characteristic parameter.

hep-ph↗

Rejecting cosmic background for exclusive neutrino interaction studies with Liquid Argon TPCs; a case study with the MicroBooNE detector

Cosmic ray (CR) interactions can be a challenging source of background for neutrino oscillation and cross-section measurements in surface detectors. We present methods for CR rejection in measurements of charged-current quasielastic-like (CCQE-like) neutrino interactions, with a muon and a proton in the final state, measured using liquid argon time projection chambers (LArTPCs). Using a sample of cosmic data collected with the MicroBooNE detector, mixed with simulated neutrino scattering events, a set of event selection criteria is developed that produces an event sample with minimal contribution from CR background. Depending on the selection criteria used a purity between 50% and 80% can be achieved with a signal selection efficiency between 50% and 25%, with higher purity coming at the expense of lower efficiency. While using a specific dataset from the MicroBooNE detector and selection criteria values optimized for CCQE-like events, the concepts presented here are generic and can be adapted for various studies of exclusive νμ interactions in LArTPCs.

physics.ins-det↗

First Measurement of $ν_μ$ Charged-Current $π^{0}$ Production on Argon with a LArTPC

We report the first measurement of the flux-integrated cross section of $ν_μ$ charged-current single $π^{0}$ production on argon. This measurement is performed with the MicroBooNE detector, an 85 ton active mass liquid argon time projection chamber exposed to the Booster Neutrino Beam at Fermilab. This result on argon is compared to past measurements on lighter nuclei to investigate the scaling assumptions used in models of the production and transport of pions in neutrino-nucleus scattering. The techniques used are an important demonstration of the successful reconstruction and analysis of neutrino interactions producing electromagnetic final states using a liquid argon time projection chamber operating at the earth's surface.

hep-ex↗

A Deep Neural Network for Pixel-Level Electromagnetic Particle Identification in the MicroBooNE Liquid Argon Time Projection Chamber

We have developed a convolutional neural network (CNN) that can make a pixel-level prediction of objects in image data recorded by a liquid argon time projection chamber (LArTPC) for the first time. We describe the network design, training techniques, and software tools developed to train this network. The goal of this work is to develop a complete deep neural network based data reconstruction chain for the MicroBooNE detector. We show the first demonstration of a network's validity on real LArTPC data using MicroBooNE collection plane images. The demonstration is performed for stopping muon and a $ν_μ$ charged current neutral pion data samples.

hep-ex↗

Ionization Electron Signal Processing in Single Phase LArTPCs II. Data/Simulation Comparison and Performance in MicroBooNE

The single-phase liquid argon time projection chamber (LArTPC) provides a large amount of detailed information in the form of fine-grained drifted ionization charge from particle traces. To fully utilize this information, the deposited charge must be accurately extracted from the raw digitized waveforms via a robust signal processing chain. Enabled by the ultra-low noise levels associated with cryogenic electronics in the MicroBooNE detector, the precise extraction of ionization charge from the induction wire planes in a single-phase LArTPC is qualitatively demonstrated on MicroBooNE data with event display images, and quantitatively demonstrated via waveform-level and track-level metrics. Improved performance of induction plane calorimetry is demonstrated through the agreement of extracted ionization charge measurements across different wire planes for various event topologies. In addition to the comprehensive waveform-level comparison of data and simulation, a calibration of the cryogenic electronics response is presented and solutions to various MicroBooNE-specific TPC issues are discussed. This work presents an important improvement in LArTPC signal processing, the foundation of reconstruction and therefore physics analyses in MicroBooNE.

physics.ins-det↗

Ionization Electron Signal Processing in Single Phase LArTPCs I. Algorithm Description and Quantitative Evaluation with MicroBooNE Simulation

We describe the concept and procedure of drifted-charge extraction developed in the MicroBooNE experiment, a single-phase liquid argon time projection chamber (LArTPC). This technique converts the raw digitized TPC waveform to the number of ionization electrons passing through a wire plane at a given time. A robust recovery of the number of ionization electrons from both induction and collection anode wire planes will augment the 3D reconstruction, and is particularly important for tomographic reconstruction algorithms. A number of building blocks of the overall procedure are described. The performance of the signal processing is quantitatively evaluated by comparing extracted charge with the true charge through a detailed TPC detector simulation taking into account position-dependent induced current inside a single wire region and across multiple wires. Some areas for further improvement of the performance of the charge extraction procedure are also discussed.

physics.ins-det↗

A new bound on polymer quantization via an opto-mechanical setup

The existence of a minimal measurable length as a characteristic length in the Planck scale is one of the main features of quantum gravity and has been widely explored in the context. Various different deformations of spacetime have been employed successfully for the purpose. However, polymer quantization approach is a relatively new and dynamic field towards the quantum gravity phenomenology, which emerges from the symmetric sector of the loop quantum gravity. In this article, we extend the standard ideas of polymer quantization to find a new and tighter bound on the polymer deformation parameter. Our protocol relies on an opto-mechanical experimental setup that was originally proposed in Ref.\cite{ref:Igor} to explore some interesting phenomena by embedding the minimal length into the standard canonical commutation relation. We extend this scheme to probe the \emph{polymer length} deformed canonical commutation relation of the center of mass mode of a mechanical oscillator with a mass around the Planck scale. The method utilizes the novelty of exchanging the relevant mechanical information with a high intensity optical pulse inside an optical cavity. We also demonstrate that our proposal is within the reach of the current technologies and, thus, it could uncover a decent realization of quantum gravitational phenomena thorough a simple table-top experiment.

gr-qc↗