arXiv subjects

A. Budano

Publications and source records attributed to A. Budano.

At least 253 records · Page 14Linked to original sources

arXiv2020

A calibration of the Belle II hadronic tag-side reconstruction algorithm with $B \rightarrow X\ell ν$ decays

Tag-side reconstruction is an important method for reconstructing $B$ meson decays with missing energy. The Belle II tag-side reconstruction algorithm, Full Event Interpretation, relies on a hierarchical reconstruction of $B$ meson decays with multivariate classification employed at each stage of reconstruction. Given the large numbers of classifiers employed and decay chains reconstructed, the performance of the algorithm on data and simulation differs significantly. Here, calibration factors are derived for hadronic tag-side $B$ decays by measuring a signal side decay, $B \rightarrow X\ell ν$, in $34.6$ fb$^{-1}$ of Belle II data. For a very loose selection on the tag-side $B$ multivariate classifier, the calibration factors are $0.65 \pm 0.02$ and $0.83 \pm 0.03$ for tag-side $B^{+}$ and $B^{0}$ mesons, respectively.

hep-ex↗

arXiv2020

Rediscovery of $B \to ϕK^{()}$ decays and measurement of the longitudinal polarization fraction $f_L$ in $B \to ϕK^{}$ decays using the Summer 2020 Belle II dataset

We utilize a sample of 34.6 fb$^{-1}$, collected by the Belle II experiment at the SuperKEKB asymmetric energy $e^+e^-$ collider, to search for the $B^+ \to ϕK^+$, $B^+ \to ϕK^{*+}$, $B^0 \to ϕK^0_S$, and $B^0 \to ϕK^{*0}$ decays. Charmless hadronic $B$ decays represent an important part of the Belle II physics program, and are an ideal benchmark to test the detector capabilities in terms of tracking efficiency, charged particle identification, vertexing, and advanced analysis techniques. Each channel is observed with a significance that exceeds 5 standard deviations, and we obtain measurements of their branching ratios that are in good agreement with the world averages. For the $B \to ϕK^*$ modes, we also perform a measurement of the longitudinal polarization fraction $f_L$.

hep-ex↗

arXiv2020

First flavor tagging calibration using 2019 Belle II data

We report on the first calibration of the standard Belle II $B$-flavor tagger using the full data set collected at the $Υ(4{\rm S})$ resonance in 2019 with the Belle II detector at the SuperKEKB collider, corresponding to 8.7 fb$^{-1}$ of integrated luminosity. The calibration is performed by reconstructing various hadronic charmed $B$-meson decays with flavor-specific final states. We use simulation to optimize our event selection criteria and to train the flavor tagging algorithm. We determine the tagging efficiency and the fraction of wrongly identified tag-side $B$~candidates from a measurement of the time-integrated $B^0-\overline{B}^0$ mixing probability. The total effective efficiency is measured to be $\varepsilon_{\rm eff} = \big(33.8 \pm 3.6(\text{stat}) \pm 1.6(\text{sys})\big)\%$, which is in good agreement with the predictions from simulation and comparable with the best one obtained by the Belle experiment. The results show a good understanding of the detector performance and offer a basis for future calibrations.

hep-ex↗

arXiv2020

Optimization of the JUNO liquid scintillator composition using a Daya Bay antineutrino detector

To maximize the light yield of the liquid scintillator (LS) for the Jiangmen Underground Neutrino Observatory (JUNO), a 20 t LS sample was produced in a pilot plant at Daya Bay. The optical properties of the new LS in various compositions were studied by replacing the gadolinium-loaded LS in one antineutrino detector. The concentrations of the fluor, PPO, and the wavelength shifter, bis-MSB, were increased in 12 steps from 0.5 g/L and <0.01 mg/L to 4 g/L and 13 mg/L, respectively. The numbers of total detected photoelectrons suggest that, with the optically purified solvent, the bis-MSB concentration does not need to be more than 4 mg/L. To bridge the one order of magnitude in the detector size difference between Daya Bay and JUNO, the Daya Bay data were used to tune the parameters of a newly developed optical model. Then, the model and tuned parameters were used in the JUNO simulation. This enabled to determine the optimal composition for the JUNO LS: purified solvent LAB with 2.5 g/L PPO, and 1 to 4 mg/L bis-MSB.

physics.ins-det↗

arXiv2020

Measurement of the branching fraction ${\cal B}(\bar B^0\to D^{*+}\ell^-\barν_\ell)$ with early Belle II data

We measure the branching fractions for the decays $\bar{B}^0 \to D^{*+} e^{-} \barν_e$ and $\bar{B}^0 \to D^{*+} μ^{-} \barν_μ$ using $8.70 \pm 0.09~{\rm fb}^{-1}$ of data collected by the Belle II experiment at the SuperKEKB asymmetric-energy $e^+ e^-$ collider. Candidate signal decays are reconstructed with the subsequent decays $D^{*+}\to D^0 π^+$ and $D^0\to K^-π^+$. We obtain the results ${\cal B}(\bar{B}^0 \to D^{*+} e^{-} \barν_e)$ = $(4.55\pm0.14(\mathrm{stat})\pm0.35 (\mathrm{syst})) \%$ and ${\cal B}(\bar{B}^0 \to D^{*+} μ^{-} \barν_μ)$ = $(4.84\pm 0.13(\mathrm{stat})\pm0.37(\mathrm{syst})) \%$, in agreement with the world averages. The measurements serve to validate the full chain of detector operation and calibration, data collection and processing, and production of physics results in the case of semileptonic $B$-meson decays.

hep-ex↗

arXiv2020

Charmless $B$ decay reconstruction in 2019 Belle II data

We report on the reconstruction of various charmless $B$ decays from electron-positron collisions at the energy corresponding to the $Υ(4S)$ resonance collected with the Belle II detector at the SuperKEKB collider. We use simulation to devise optimized event selections and apply them to the full data set collected in 2019, corresponding to 8.7\,fb$^{-1}$ of integrated luminosity. We fit the difference between half of the collision energy and the $B$ candidate energy (in the $Υ(4S)$ frame) for events restricted to a signal-rich range in beam-energy-constrained mass to search for charmless signals. Signal yields of approximately 80, 15, 20, 30, 90, and 160 decays are reconstructed for the channels $B^0 \to K^+π^-$, $B^0 \to π^+π^-$, $B^+ \to K^0_S(\to π^+π^-)π^+$, $B^+ \to K^+π^0(\to γγ)$, $B^+ \to K^+K^-K^+$, and $B^+ \to K^+π^-π^+$, respectively. Yields and background contaminations are compatible with those expected from simulation and comparable with those obtained by the Belle experiment. The results show a good understanding of the detector performance and offer a reliable basis to assess projections for future reach.

hep-ex↗

arXiv2020

Measurement of the $B^0$ lifetime using fully reconstructed hadronic decays in the 2019 Belle II dataset

This document presents the measurement of $B^0$ meson lifetimes using the 2019 Belle II dataset that corresponds to an integrated luminosity of $8.7 \pm 0.2$ fb$^{-1}$. Each candidate is fully reconstructed with hadronic decay final states on the signal side, while the rest-of-event technique allows to infer the decay vertex position on the other (tag) side. $B^0$ lifetime is extracted from an unbinned maximum likelihood fit to the distribution of the difference between the signal side $B^0$ candidate and the tag side decay times. The measured lifetime is $τ_{B^0} = 1.48 \pm 0.28 \pm 0.06 $ ps, where the first uncertainty is statistical and the second is systematic.

hep-ex↗

arXiv2020

Embedded Readout Electronics R&D for the Large PMTs in the JUNO Experiment

Jiangmen Underground neutrino Observatory (JUNO) is a next generation liquid scintillator neutrino experiment under construction phase in South China. Thanks to the anti-neutrinos produced by the nearby nuclear power plants, JUNO will primarily study the neutrino mass hierarchy, one of the open key questions in neutrino physics. One key ingredient for the success of the measurement is to use high speed, high resolution sampling electronics located very close to the detector signal. Linearity in the response of the electronics in another important ingredient for the success of the experiment. During the initial design phase of the electronics, a custom design, with the Front-End and Read-Out electronics located very close to the detector analog signal has been developed and successfully tested. The present paper describes the electronics structure and the first tests performed on the prototypes. The electronics prototypes have been tested and they show good linearity response, with a maximum deviation of 1.3% over the full dynamic range (1-1000 p.e.), fulfilling the JUNO experiment requirements.

physics.ins-det↗

arXiv2020

Measurement of the branching fraction for the decay $K_S \to πμν$ with the KLOE detector

Based on a sample of 300 million $K_S$ mesons produced in $ϕ\to K_L K_S$ decays recorded by the KLOE experiment at the DA$Φ$NE $e^+e^-$ collider we have measured the branching fraction for the decay $K_S \to πμν$. The $K_S$ mesons are identified by the interaction of $K_L$ mesons in the detector. The $K_S \to πμν$ decays are selected by a boosted decision tree built with kinematic variables and by a time-of-flight measurement. Signal efficiencies are evaluated with data control samples of $K_L \to πμν$ decays. A fit to the reconstructed muon mass distribution finds $7223 \pm 180$ signal events. Normalising to the $K_S \to π^+ π^-$ decay events the result for the branching fraction is $\mathcal{B}(K_S \to πμν) = (4.56 \pm 0.11_{\rm stat} \pm 0.17_{\rm syst})\times10^{-4}$.

hep-ex↗

arXiv2020

Search for an invisibly decaying $Z^{\prime}$ boson at Belle II in $e^+ e^- \to μ^+ μ^- (e^{\pm} μ^{\mp})$ plus missing energy final states

Theories beyond the standard model often predict the existence of an additional neutral boson, the $Z^{\prime}$. Using data collected by the Belle II experiment during 2018 at the SuperKEKB collider, we perform the first searches for the invisible decay of a $Z^{\prime}$ in the process $e^+ e^- \to μ^+ μ^- Z^{\prime}$ and of a lepton-flavor-violating $Z^{\prime}$ in $e^+ e^- \to e^{\pm} μ^{\mp} Z^{\prime}$. We do not find any excess of events and set 90\% credibility level upper limits on the cross sections of these processes. We translate the former, in the framework of an $L_μ-L_τ$ theory, into upper limits on the $Z^{\prime}$ coupling constant at the level of $5 \times 10^{-2}$ -- $1$ $M_{Z^\prime}\leq 6$ GeV/$c^2$.

hep-ex↗

arXiv2019

Measurement of the integrated luminosity of the Phase 2 data of the Belle II experiment

From April to July 2018, a data sample at the peak energy of the $Υ(4S)$ resonance was collected with the Belle~II detector at the SuperKEKB electron-positron collider. This is the first data sample of the Belle~II experiment. Using Bhabha and digamma events, we measure the integrated luminosity of the data sample to be ($496.3 \pm 0.3 \pm 3.0$)~pb$^{-1}$, where the first uncertainty is statistical and the second is systematic. This work provides a basis for future luminosity measurements at Belle~II.

hep-ex↗

arXiv2019

$^{222}$Rn contamination mechanisms on acrylic surfaces

In this work, the $^{222}$Rn contamination mechanisms on acrylic surfaces have been investigated. $^{222}$Rn can represent a significant background source for low-background experiments, and acrylic is a suitable material for detector design thanks to its purity and transparency. Four acrylic samples have been exposed to a $^{222}$Rn rich environment for different time periods, being contaminated by $^{222}$Rn and its progenies. Subsequently, the time evolution of radiocontaminants activity on the samples has been evaluated with $α$ and $γ$ measurements, highlighting the role of different decay modes in the contamination process. A detailed analysis of the alpha spectra allowed to quantify the implantation depth of the contaminants. Moreover, a study of both $α$ and $γ$ measurements pointed out the $^{222}$Rn diffusion inside the samples.

physics.ins-det↗

arXiv2019

Distillation and stripping pilot plants for the JUNO neutrino detector: design, operations and reliability

This paper describes the design, construction principles and operations of the distillation and stripping pilot plants tested at the Daya Bay Neutrino Laboratory, with the perspective to adapt this processes, system cleanliness and leak-tightness to the final full scale plants that will be used for the purification of the liquid scintillator used in the JUNO neutrino detector. The main goal of these plants is to remove radio impurities from the liquid scintillator while increasing its optical attenuation length. Purification of liquid scintillator will be performed with a system combining alumina oxide, distillation, water extraction and steam (or N2 gas) stripping. Such a combined system will aim at obtaining a total attenuation length greater than 20 m at 430 nm, and a bulk radiopurity for 238U and 232Th in the 10-15 to 10-17 g/g range. The pilot plants commissioning and operation have also provided valuable information on the degree of reliability of their main components, which will be particularly useful for the design of the final full scale purification equipment for the JUNO liquid scintillator. This paper describe two of the five pilot plants since the Alumina Column, Fluor mixing and the Water Extraction plants are in charge of the Chinese part of the collaboration.

physics.ins-det↗

arXiv2019

GIGJ: a crustal gravity model of the Guangdong Province for predicting the geoneutrino signal at the JUNO experiment

Gravimetric methods are expected to play a decisive role in geophysical modeling of the regional crustal structure applied to geoneutrino studies. GIGJ (GOCE Inversion for Geoneutrinos at JUNO) is a 3D numerical model constituted by ~46 x 10$^{3}$ voxels of 50 x 50 x 0.1 km, built by inverting gravimetric data over the 6° x 4° area centered at the Jiangmen Underground Neutrino Observatory (JUNO) experiment, currently under construction in the Guangdong Province (China). The a-priori modeling is based on the adoption of deep seismic sounding profiles, receiver functions, teleseismic P-wave velocity models and Moho depth maps, according to their own accuracy and spatial resolution. The inversion method allowed for integrating GOCE data with the a-priori information and regularization conditions through a Bayesian approach and a stochastic optimization. GIGJ fits the homogeneously distributed GOCE gravity data, characterized by high accuracy, with a ~1 mGal standard deviation of the residuals, compatible with the observation accuracy. Conversely to existing global models, GIGJ provides a site-specific subdivision of the crustal layers masses which uncertainties include estimation errors, associated to the gravimetric solution, and systematic uncertainties, related to the adoption of a fixed sedimentary layer. A consequence of this local rearrangement of the crustal layer thicknesses is a ~21% reduction and a ~24% increase of the middle and lower crust expected geoneutrino signal, respectively. Finally, the geophysical uncertainties of geoneutrino signals at JUNO produced by unitary uranium and thorium abundances distributed in the upper, middle and lower crust are reduced by 77%, 55% and 78%, respectively. The numerical model is available at http://www.fe.infn.it/u/radioactivity/GIGJ

physics.geo-ph↗

arXiv2018

Measurement of the charge asymmetry for the $K_S \rightarrow πe ν$ decay and test of CPT symmetry with the KLOE detector

Using 1.63 fb$^{-1}$ of integrated luminosity collected by the KLOE experiment about $7\times 10^4$ $K_S \rightarrow π^{\pm}e^{\mp}ν$ decays have been reconstructed. The measured value of the charge asymmetry for this decay is $A_S = (-4.9 \pm 5.7_{stat} \pm 2.6_{syst}) \times 10^{-3}$, which is almost twice more precise than the previous KLOE result. The combination of these two measurements gives $A_S = (-3.8 \pm 5.0_{stat} \pm 2.6_{syst}) \times 10^{-3}$ and, together with the asymmetry of the $K_L$ semileptonic decay, provides significant tests of the CPT symmetry. The obtained results are in agreement with CPT invariance.

hep-ex↗

arXiv2018

Combined limit on the production of a light gauge boson decaying into $μ^+μ^-$ and $π^+π^-$

We searched for the $μ^+μ^-$ decay of a light vector gauge boson, also known as dark photon, in the $e^+ e^- \to μ^+ μ^- γ_{\rm ISR}$ process by means of the Initial State Radiation (ISR) method. We used 1.93~fb$^{-1}$ of data collected by the KLOE experiment at the DA$Φ$NE $ϕ$-factory. No structures have been observed over the irreducible $μ^+ μ^-$ background. A 90\% CL limit on the ratio $\varepsilon^2=α^{\prime}/α$ between the dark coupling constant and the fine structure constant of $ 3\times 10^{-6}-2\times 10^{-7}$ has been set in the dark photon mass region between 519 MeV and 973 MeV. This new limit has been combined with the published result obtained investigating the hypothesis of the dark photon decaying into hadrons in $e^+ e^- \to π^+ π^- γ_{\rm ISR}$ events. The combined 90\% CL limit increases the sensitivity especially in the $ρ-ω$ interference region and excludes $\varepsilon^2$ greater than $(13-2)\times 10^{-7}$. For dark photon masses greater than 600 MeV the combined limit is lower than 8~$\times\, 10^{-7}$ resulting more stringent than present constraints from other experiments.

hep-ex↗

arXiv2018

Nanoseconds Timing System Based on IEEE 1588 FPGA Implementation

Clock synchronization procedures are mandatory in most physical experiments where event fragments are readout by spatially dislocated sensors and must be glued together to reconstruct key parameters (e.g. energy, interaction vertex etc.) of the process under investigation. These distributed data readout topologies rely on an accurate time information available at the frontend, where raw data are acquired and tagged with a precise timestamp prior to data buffering and central data collecting. This makes the network complexity and latency, between frontend and backend electronics, negligible within upper bounds imposed by the frontend data buffer capability. The proposed research work describes an FPGA implementation of IEEE 1588 Precision Time Protocol (PTP) that exploits the CERN Timing, Trigger and Control (TTC) system as a multicast messaging physical and data link layer. The hardware implementation extends the clock synchronization to the nanoseconds range, overcoming the typical accuracy limitations inferred by computers Ethernet based Local Area Network (LAN). Establishing a reliable communication between master and timing receiver nodes is essential in a message-based synchronization system. In the backend electronics, the serial data streams synchronization with the global clock domain is guaranteed by an hardware-based finite state machine that scans the bit period using a variable delay chain and finds the optimal sampling point. The validity of the proposed timing system has been proved in point-to-point data links as well as in star topology configurations over standard CAT-5e cables. The results achieved together with weaknesses and possible improvements are hereby detailed.

cs.NI↗

arXiv2018

Combination of KLOE $σ\big(e^+e^-\rightarrowπ^+π^-γ(γ)\big)$ measurements and determination of $a_μ^{π^+π^-}$ in the energy range $0.10 < s < 0.95$ GeV$^2$

The three precision measurements of the cross section $σ\big(e^+e^-\rightarrowπ^+π^-γ(γ)\big)$ using initial state radiation by the KLOE collaboration provide an important input for the prediction of the hadronic contribution to the anomalous magnetic moment of the muon. These measurements are correlated for both statistical and systematic uncertainties and, therefore, the simultaneous use of these measurements requires covariance matrices that fully describe the correlations. We present the construction of these covariance matrices and use them to determine a combined KLOE measurement for $σ\big(e^+e^-\rightarrowπ^+π^-γ(γ)\big)$. We find, from this combination, a two-pion contribution to the muon magnetic anomaly in the energy range $0.10 < s < 0.95$ GeV$^2$ of $a_μ^{π^+π^-} = (489.8 \pm 1.7_{\rm stat} \pm 4.8_{\rm sys} ) \times 10^{-10}$.

hep-ex↗