arXiv subjects

A. C. Ferrari

Publications and source records attributed to A. C. Ferrari.

At least 37 records · Page 2Linked to original sources

arXiv2018

Direct observation of intravalley spin relaxation in single-layer WS$_2$

In monolayer Transition Metal Dichalcogenides (TMDs) the valence and conduction bands are spin split because of the strong spin-orbit interaction. In tungsten-based TMDs the spin-ordering of the conduction band is such that the so-called dark exciton, consisting of an electron and a hole with opposite spin orientation, has lower energy than the A exciton. A possible mechanism leading to the transition from bright to dark excitons involves the scattering of the electrons from the upper to the lower conduction band state in K. Here we exploit the valley selective optical selection rules and use two-color helicity-resolved pump-probe spectroscopy to directly measure the intravalley spin-flip relaxation dynamics of electrons in the conduction band of single-layer WS$_2$. This process occurs on a sub-ps time scale and it is significantly dependent on the temperature, indicative of a phonon-assisted relaxation. These experimental results are supported by time-dependent ab-initio calculations which show that the intra-valley spin-flip scattering occurs on significantly longer time scales only exactly at the K point. In a realistic situation the occupation of states away from the minimum of the conduction band leads to a dramatic reduction of the scattering time.

cond-mat.mtrl-sci↗

arXiv2018

Scalar Nanosecond Pulse Generation in a Nanotube Mode-Locked Environmentally Stable Fiber Laser

We report an environmentally stable nanotube mode-locked fibre laser producing linearly-polarized, nanosecond pulses. A simple all-polarization-maintaining fibre ring cavity is used, including 300 m of highly nonlinear fibre to elongate the cavity and increase intracavity dispersion and nonlinearity. The laser generates scalar pulses with a duration of 1.23 ns at a centre wavelength of 1042 nm, with 1.3-nm bandwidth and at 641-kHz repetition rate. Despite the long cavity, the output characteristics show no significant variation when the cavity is perturbed, and the degree of polarization remains at 97%.

physics.optics↗

arXiv2018

Tetrahedral amorphous carbon resistive memories with graphene-based electrodes

Resistive-switching memories are alternative to Si-based ones, which face scaling and high power consumption issues. Tetrahedral amorphous carbon (ta-C) shows reversible, non-volatile resistive switching. Here we report polarity independent ta-C resistive memory devices with graphene-based electrodes. Our devices show ON/OFF resistance ratios$\sim$4x$10^5$, ten times higher than with metal electrodes, with no increase in switching power, and low power density$\sim$14$μ$W/$μ$m$^2$. We attribute this to a suppressed tunneling current due to the low density of states of graphene near the Dirac point, consistent with the current-voltage characteristics derived from a quantum point contact model. Our devices also have multiple resistive states. This allows storing more than one bit per cell. This can be exploited in a range of signal processing/computing-type operations, such as implementing logic, providing synaptic and neuron-like mimics, and performing analogue signal processing in non-von-Neumann architectures

physics.app-ph↗

arXiv2018

Cleaning Interfaces in Layered Materials Heterostructures

Heterostructures formed by stacking layered materials require atomically clean interfaces. However, contaminants are usually trapped between the layers, aggregating into blisters. We report a process to remove such blisters, resulting in clean interfaces. We fabricate blister-free regions of graphene encapsulated in hexagonal boron nitride of$\sim$5000$μ$m$^{2}$, limited only by the size of the exfoliated flakes. These have mobilities up to$\sim$180000cm$^2$V$^{-1}$s$^{-1}$ at room temperature, and$\sim$1.8$\times$10$^6$cm$^2$V$^{-1}$s$^{-1}$ at 9K. We further demonstrate the effectiveness of our approach by cleaning heterostructures assembled using graphene intentionally exposed to polymers and solvents. After cleaning, these samples reach similar high mobilities. We also showcase the general applicability of our approach to layered materials by cleaning blisters in other heterostructures based on MoS$_{2}$. This demonstrates that exposure of graphene to processing-related contaminants is compatible with the realization of high mobility samples, paving the way to the development of fab-based processes for the integration of layered materials in (opto)-electronic devices.

cond-mat.mes-hall↗

arXiv2018

Raman spectroscopy of graphene under ultrafast laser excitation

The equilibrium optical phonons of graphene are well characterized in terms of anharmonicity and electron-phonon interactions, however their non-equilibrium properties in the presence of hot charge carriers are still not fully explored. Here we study the Raman spectrum of graphene under ultrafast laser excitation with 3ps pulses, which trade off between impulsive stimulation and spectral resolution. We localize energy into hot carriers, generating non-equilibrium temperatures in the ~1700-3100K range, far exceeding that of the phonon bath, while simultaneously detecting the Raman response. The linewidth of both G and 2D peaks show an increase as function of the electronic temperature. We explain this as a result of the Dirac cones' broadening and electron-phonon scattering in the highly excited transient regime, important for the emerging field of graphene-based photonics and optoelectronics.

cond-mat.mes-hall↗

arXiv2017

Out-of-plane heat transfer in van der Waals stacks: electron-hyperbolic phonon coupling

Van der Waals heterostructures have emerged as promising building blocks that offer access to new physics, novel device functionalities, and superior electrical and optoelectronic properties. Applications such as thermal management, photodetection, light emission, data communication, high-speed electronics and light harvesting require a thorough understanding of (nanoscale) heat flow. Here, using time-resolved photocurrent measurements we identify an efficient out-of-plane energy transfer channel, where charge carriers in graphene couple to hyperbolic phonon polaritons in the encapsulating layered material. This hyperbolic cooling is particularly efficient, giving picosecond cooling times, for hexagonal BN, where the high-momentum hyperbolic phonon polaritons enable efficient near-field energy transfer. We study this heat transfer mechanism through distinct control knobs to vary carrier density and lattice temperature, and find excellent agreement with theory without any adjustable parameters. These insights may lead to the ability to control heat flow in van der Waals heterostructures.

cond-mat.mes-hall↗

arXiv2017

Broadband, electrically tuneable, third harmonic generation in graphene

Optical harmonic generation occurs when high intensity light ($>10^{10}$W/m$^{2}$) interacts with a nonlinear material. Electrical control of the nonlinear optical response enables applications such as gate-tunable switches and frequency converters. Graphene displays exceptionally strong-light matter interaction and electrically and broadband tunable third order nonlinear susceptibility. Here we show that the third harmonic generation efficiency in graphene can be tuned by over two orders of magnitude by controlling the Fermi energy and the incident photon energy. This is due to logarithmic resonances in the imaginary part of the nonlinear conductivity arising from multi-photon transitions. Thanks to the linear dispersion of the massless Dirac fermions, ultrabroadband electrical tunability can be achieved, paving the way to electrically-tuneable broadband frequency converters for applications in optical communications and signal processing.

cond-mat.mes-hall↗

arXiv2017

Vertically-Illuminated, Resonant-Cavity-Enhanced, Graphene-Silicon Schottky Photodetectors

We report vertically-illuminated, resonant cavity enhanced, graphene-Si Schottky photodetectors (PDs) operating at 1550nm. These exploit internal photoemission at the graphene-Si interface. To obtain spectral selectivity and enhance responsivity, the PDs are integrated with an optical cavity, resulting in multiple reflections at resonance, and enhanced absorption in graphene. Our devices have wavelength-dependent photoresponse with external (internal) responsivity~20mA/W (0.25A/W). The spectral-selectivity may be further tuned by varying the cavity resonant wavelength. Our devices pave the way for developing high responsivity hybrid graphene-Si free-space illuminated PDs for free-space optical communications, coherence optical tomography and light-radars

physics.app-ph↗

arXiv2017

Graphene Phase Modulator

We demonstrate a 10Gb/s Graphene Phase Modulator (GPM) integrated in a Mach-Zehnder interferometer configuration. This is a compact device, with a phase-shifter length of only 300$μ$m, and 35dB extinction ratio. The GPM has modulation efficiency of 0.28Vcm, one order of magnitude higher compared to state-of-the-art depletion p-n junction Si phase modulators. Our GPM operates with 2V peak-to-peak driving voltage in a push-pull configuration, and it has been tested in a binary transmission of a non-return-to-zero data stream over 50km single mode fibre. This device is the key building block for graphene-based integrated photonics, enabling compact and energy efficient hybrid Si-graphene modulators for telecom, datacom and other applications

cond-mat.mes-hall↗

arXiv2016

Microfluidization of graphite and formulation of graphene-based conductive inks

We report the exfoliation of graphite in aqueous solutions under high shear rate [$\sim10^8s^{-1}$] turbulent flow conditions, with a 100\% exfoliation yield. The material is stabilized without centrifugation at concentrations up to 100 g/L using carboxymethylcellulose sodium salt to formulate conductive printable inks. The sheet resistance of blade coated films is below$\sim2Ω/\square$. This is a simple and scalable production route for graphene-based conductive inks for large area printing in flexible electronics.

cond-mat.mtrl-sci↗

arXiv2016

Weak Localization in Electric-Double-Layer Gated Few-layer Graphene

We induce surface carrier densities up to $\sim7\cdot 10^{14}$cm$^{-2}$ in few-layer graphene devices by electric double layer gating with a polymeric electrolyte. In 3-, 4- and 5-layer graphene below 20-30K we observe a logarithmic upturn of resistance that we attribute to weak localization in the diffusive regime. By studying this effect as a function of carrier density and with ab-initio calculations we derive the dependence of transport, intervalley and phase coherence scattering lifetimes on total carrier density. We find that electron-electron scattering in the Nyquist regime is the main source of dephasing at temperatures lower than 30K in the $\sim10^{13}$cm$^{-2}$ to $\sim7 \cdot 10^{14}$cm$^{-2}$ range of carrier densities. With the increase of gate voltage, transport elastic scattering is dominated by the competing effects due to the increase in both carrier density and charged scattering centers at the surface. We also tune our devices into a crossover regime between weak and strong localization, indicating that simultaneous tunability of both carrier and defect density at the surface of electric double layer gated materials is possible.

cond-mat.mes-hall↗

arXiv2016

Ultra-strong nonlinear optical processes and trigonal warping in MoS$_2$ layers

We report ultra-strong high-order nonlinear multiphoton processes in monolayer MoS$_2$ (1L-MoS$_2$): the third harmonic is thirty times stronger than the second harmonic, and the fourth harmonic is comparable to the second harmonic. We find that second and third harmonic processes are strongly dependent on elliptical polarization, which can be used to selectively tune harmonic generation with different orders. We explain this by calculating the nonlinear response functions of 1L-MoS$_2$ with a continuum-model Hamiltonian and quantum-mechanical diagrammatic perturbation theory, highlighting the crucial role of trigonal warping. A similar effect is expected for all other transition-metal dichalcogenides. Our results pave the way for efficient and tunable harmonic generation based on layered materials for various applications, including microscopy and imaging

cond-mat.mes-hall↗

arXiv2016

Graphene-based, mid-infrared, room-temperature pyroelectric bolometers with ultrahigh temperature coefficient of resistance

Graphene is ideally suited for photonic and optoelectronic applications, with a variety of photodetectors (PDs) in the visible, near-infrared (NIR), and THz reported to date, as well as thermal detectors in the mid-infrared (MIR). Here, we present a room temperature-MIR-PD where the pyroelectric response of a LiNbO3 crystal is transduced with high gain (up to 200) into resistivity modulation for graphene, leading to a temperature coefficient of resistance up to 900%/K, two orders of magnitude higher than the state of the art, for a device area of 300x300um2. This is achieved by fabricating a floating metallic structure that concentrates the charge generated by the pyroelectric substrate on the top-gate capacitor of the graphene channel. This allows us to resolve temperature variations down to 15umK at 1 Hz, paving the way for a new generation of detectors for MIR imaging and spectroscopy

physics.ins-det↗

arXiv2015

High Responsivity, Large-Area Graphene/MoS2 Flexible Photodetectors

We present flexible photodetectors (PDs) for visible wavelengths fabricated by stacking centimetre-scale chemical vapour deposited (CVD) single layer graphene (SLG) and single layer CVD MoS2, both wet transferred onto a flexible polyethylene terephthalate substrate. The operation mechanism relies on injection of photoexcited electrons from MoS2 to the SLG channel. The external responsivity is 45.5A/W and the internal 570A/W at 642nm. This is at least two orders of magnitude higher than bulk-semiconductor flexible membranes and other flexible PDs based on graphene and layered materials. The photoconductive gain is up to 4x10^5. The photocurrent is in the 0.1-100 uA range. The devices are semi-transparent, with just 8% absorption at 642nm and work stably upon bending to a curvature of 6cm. These capabilities and the low voltage operation (<1V) make them attractive for wearable applications.

cond-mat.mtrl-sci↗

arXiv2015

Transport Conductivity of Graphene at RF and Microwave Frequencies

We measure graphene coplanar waveguides from direct current (DC) to 13.5GHz and show that the apparent resistance (in the presence of parasitic impedances) has an quadratic frequency dependence, but the intrinsic conductivity (without the influence of parasitic impedances) is frequency-independent. Consequently, in our devices the real part of the complex alternating current conductivity is the same as the DC value and the imaginary part~0. The graphene channel is modelled as a parallel resistive-capacitive network with a frequency dependence identical to that of the Drude conductivity with momentum relaxation time~2.1ps, highlighting the influence of alternating current (AC) electron transport on the electromagnetic properties of graphene. This can lead to optimized design of high-speed analogue field-effect transistors, mixers, frequency doublers, low-noise amplifiers and radiation detectors.

cond-mat.mes-hall↗

arXiv2015

Ultrafast pseudospin dynamics in graphene

Interband optical transitions in graphene are subject to pseudospin selection rules. Impulsive excitation with linearly polarized light generates an anisotropic photocarrier occupation in momentum space that evolves at timescales shorter than 100fs. Here, we investigate the evolution of non-equilibrium charges towards an isotropic distribution by means of fluence-dependent ultrafast spectroscopy and develop an analytical model able to quantify the isotropization process. In contrast to conventional semiconductors, the isotropization is governed by optical phonon emission, rather than electron-electron scattering, which nevertheless contributes in shaping the anisotropic photocarrier occupation within the first few fs.

cond-mat.mes-hall↗

arXiv2015

Surface plasmon polariton graphene photodetectors

The combination of plasmonic nanoparticles and graphene enhances the responsivity and spectral selectivity of graphene-based photodetectors. However, the small area of the metal-graphene junction, where the induced electron-hole pairs separate, limits the photoactive region to sub-micron length scales. Here, we couple graphene with a plasmonic grating and exploit the resulting surface plasmon polaritons to deliver the collected photons to the junction region of a metal-graphene-metal photodetector. This results into a 400% enhancement of responsivity and a 1000% increase in photoactive length, combined with tunable spectral selectivity. The interference between surface plasmon polaritons and the incident wave introduces new functionalities, such as light flux attraction or repulsion from the contact edges, enabling the tailored design of the photodetector's spectral response. This architecture can also be used for surface plasmon bio-sensing with direct-electric- readout, eliminating the need of complicated optics.

cond-mat.mes-hall↗

arXiv2015

Few-cycle pulses from a graphene mode-locked all-fiber laser

We combine a graphene mode-locked oscillator with an external compressor and achieve~29fs pulses with~52mW average power. This is a simple, low-cost, and robust setup, entirely fiber based, with no free-space optics, for applications requiring high temporal resolution.

cond-mat.mes-hall↗