Searcharxiv⌕ Search

arXiv subjects

A. C. Ferrari

Publications and source records attributed to A. C. Ferrari.

At least 73 records · Page 4Linked to original sources

The Shear Mode of Multi-Layer Graphene

We uncover the interlayer shear mode of multi-layer graphene samples, ranging from bilayer-graphene (BLG) to bulk graphite, and show that the corresponding Raman peak measures the interlayer coupling. This peak scales from~43cm-1 in bulk graphite to~31cm-1 in BLG. Its low energy makes it a probe of near-Dirac point quasi-particles, with a Breit-Wigner-Fano lineshape due to resonance with electronic transitions. Similar shear modes are expected in all layered materials, providing a direct probe of interlayer interactions

cond-mat.mes-hall↗

Quantifying defects in graphene via Raman spectroscopy at different excitation energies

We present a Raman study of Ar(+)-bombarded graphene samples with increasing ion doses. This allows us to have a controlled, increasing, amount of defects. We find that the ratio between the D and G peak intensities for a given defect density strongly depends on the laser excitation energy. We quantify this effect and present a simple equation for the determination of the point defect density in graphene via Raman spectroscopy for any visible excitation energy. We note that, for all excitations, the D to G intensity ratio reaches a maximum for an inter-defect distance ~3nm. Thus, a given ratio could correspond to two different defect densities, above or below the maximum. The analysis of the G peak width and its dispersion with excitation energy solves this ambiguity.

cond-mat.mtrl-sci↗

Atomic force microscope nanolithography of graphene: cuts, pseudo-cuts and tip current measurements

We investigate atomic force microscope nanolithography of single and bilayer graphene. In situ tip current measurements show that cutting of graphene is not current driven. Using a combination of transport measurements and scanning electron microscopy we show that, while indentations accompanied by tip current appear in the graphene lattice for a range of tip voltages, real cuts are characterized by a strong reduction of the tip current above a threshold voltage. The reliability and flexibility of the technique is demonstrated by the fabrication, measurement, modification and re-measurement of graphene nanodevices with resolution down to 15 nm.

cond-mat.mes-hall↗

Intercalation of Few-Layer Graphite Flakes with FeCl3: Raman Determination of Fermi Level, Layer Decoupling and Stability

We use anhydrous ferric chloride (FeCl3) to intercalate graphite flakes consisting of 2 to 4 graphene layers and to dope graphene monolayers. The intercalant, staging, stability and doping of the resulting intercalation compounds (ICs) are characterized by Raman scattering. The G peak of monolayer graphene heavily-doped by FeCl3 upshifts to~1627cm-1. 2-4 layer ICs have similar upshifts, and a Lorentzian lineshape for the 2D band, indicating that each layer behaves as a decoupled heavily doped monolayer. By performing Raman measurement at different excitation energies we show that, for a given doping level, the 2D peak can be suppressed by Pauli blocking for laser energy below the doping level. Thus, multi-wavelength Raman spectroscopy allows a direct evaluation of the Fermi level, complementary to that derived by Raman measurements at excitation energies higher than the doping level. We estimate a Fermi level shift of~0.9eV. These ICs are ideal test-beds for the physical and chemical properties of heavily-doped graphenes.

cond-mat.mtrl-sci↗

Graphene Q-switched, tunable fiber laser

We demonstrate a wideband-tunable Q-switched fiber laser exploiting a graphene saturable absorber. We get ~2us pulses, tunable between 1522 and 1555nm with up to~40nJ energy. This is a simple and low-cost light source for metrology, environmental sensing and biomedical diagnostics.

cond-mat.mes-hall↗

Sub 200fs pulse generation from a graphene mode-locked fiber laser

Ultrafast fiber lasers with short pulses and broad bandwidth are in great demand for a variety of applications, such as spectroscopy, biomedical diagnosis and optical communications. In particular sub-200fs pulses are required for ultrafast spectroscopy with high temporal resolution. Graphene is an ideal ultra-wide-band saturable absorber. We report the generation of 174fs pulses from a graphene-based fiber laser

cond-mat.mes-hall↗

Tilted potential induced coupling of localized states in a graphene nanoconstriction

We use the charged tip of a low temperature scanning probe microscope to perturb the transport through a graphene nanoconstriction. Maps of the conductance as a function of tip position display concentric halos, and by following the expansion of the halos with back-gate voltage we are able to identify an elongated domain over the nanoconstriction where they originate. Amplitude modulations of the transmission resonances are correlated with the gradient of the tip-induced potential and we analyze this in terms of modified coupling between localized states.

cond-mat.mes-hall↗

Graphene Photonics and Optoelectronics

The richness of optical and electronic properties of graphene attracts enormous interest. Graphene has high mobility and optical transparency, in addition to flexibility, robustness and environmental stability. So far, the main focus has been on fundamental physics and electronic devices. However, we believe its true potential to be in photonics and optoelectronics, where the combination of its unique optical and electronic properties can be fully exploited, even in the absence of a bandgap, and the linear dispersion of the Dirac electrons enables ultra-wide-band tunability. The rise of graphene in photonics and optoelectronics is shown by several recent results, ranging from solar cells and light emitting devices, to touch screens, photodetectors and ultrafast lasers. Here we review the state of the art in this emerging field.

cond-mat.mtrl-sci↗

Brownian Motion of Graphene

We study the Brownian motion (BM) of optically trapped graphene flakes. These orient orthogonal to the light polarization, due to the optical constants anisotropy. We explain the flake dynamics, measure force and torque constants and derive a full electromagnetic theory of optical trapping. The understanding of two dimensional BM paves the way to light-controlled manipulation and all-optical sorting of biological membranes and anisotropic macromolecules.

cond-mat.mtrl-sci↗

Surface Enhanced Raman Spectroscopy of Graphene

Surface enhanced Raman scattering (SERS) exploits surface plasmons induced by the incident field in metallic nanostructures to significantly increase the Raman intensity. Graphene provides the ideal prototype two dimensional (2d) test material to investigate SERS. Its Raman spectrum is well known, graphene samples are entirely reproducible, height controllable down to the atomic scale, and can be made virtually defect-free. We report SERS from graphene, by depositing arrays of Au particles of well defined dimensions on graphene/SiO$_2$(300nm)/Si. We detect significant enhancements at 633nm. To elucidate the physics of SERS, we develop a quantitative analytical and numerical theory. The 2d nature of graphene allows for a closed-form description of the Raman enhancement. This scales with the nanoparticle cross section, the fourth power of the Mie enhancement, and is inversely proportional to the tenth power of the separation between graphene and the nanoparticle. One consequence is that metallic nanodisks are an ideal embodiment for SERS in 2d.

cond-mat.mes-hall↗

Wideband tunable, graphene-mode locked, ultrafast laser

We report a tunable ultrafast fiber laser mode-locked with a graphene saturable absorber. The linear dispersions of the Dirac electrons in graphene enable wideband tunability. We get ~1ps pulses, tunable between 1525 and 1559nm, demonstrating graphene as a broadband saturable absorber.

cond-mat.other↗

Doped graphane: a prototype high-Tc electron-phonon superconductor

We show by first-principles calculations that p-doped graphane is a conventional superconductor with a critical temperature (Tc) above the boiling point of liquid nitrogen. The unique strength of the chemical bonds between carbon atoms and the large density of electronic states at the Fermi energy arising from the reduced dimensionality synergetically push Tc above 90K, and give rise to large Kohn anomalies in the optical phonon dispersions. As evidence of graphane was recently reported, and doping of related materials such as graphene, diamond and carbon nanostructures is well established, superconducting graphane may be feasible.

cond-mat.mtrl-sci↗

Scanning gate microscopy of current-annealed single layer graphene

We have used scanning gate microscopy to explore the local conductivity of a current-annealed graphene flake. A map of the local neutrality point (NP) after annealing at low current density exhibits micron-sized inhomogeneities. Broadening of the local e-h transition is also correlated with the inhomogeneity of the NP. Annealing at higher current density reduces the NP inhomogeneity, but we still observe some asymmetry in the e-h conduction. We attribute this to a hole doped domain close to one of the metal contacts combined with underlying striations in the local NP.

cond-mat.mes-hall↗

Making Graphene Luminescent

We show that strong photoluminescence (PL) can be induced in single-layer graphene on using an oxygen plasma treatment. PL characteristics are spatially uniform across the flakes and connected to elastic scattering spectra distinctly different from those of gapless pristine graphene. Oxygen plasma can be used to selectively convert the topmost layer when multi-layer samples are treated

cond-mat.other↗

Graphene Mode-Locked Ultrafast Laser

Graphene is at the center of a significant research effort. Near-ballistic transport at room temperature and high mobility make it a potential material for nanoelectronics. Its electronic and mechanical properties are also ideal for micro and nanomechanical systems, thin-film transistors and transparent and conductive composites and electrodes. Here we exploit the optoelectronic properties of graphene to realize an ultrafast laser. A graphene-polymer composite is fabricated using wet-chemistry techniques. Pauli blocking following intense illumination results in saturable absorption, independent of wavelength. This is used to passively mode-lock an Erbium-doped fibre laser working at 1559nm, with a 5.24nm spectral bandwidth and ~460fs pulse duration, paving the way to graphene-based photonics.

cond-mat.mtrl-sci↗

Electron-electron interactions and doping dependence of the two-phonon Raman intensity in graphene

Raman spectroscopy is a fast, non-destructive means to characterize graphene samples. In particular, the Raman spectra show a significant dependence on doping. While the change in position and width of the G peak can be explained by the non-adiabatic Kohn anomaly at $Γ$, the significant doping dependence of the 2D peak intensity has not been explained yet. Here we show that this is due to a combination of electron-phonon and electron-electron scattering. Under full resonance, the photogenerated electron-hole pairs can scatter not just with phonons, but also with doping-induced electrons or holes, and this changes the intensity. We explain the doping dependence and show how it can be used to determine the corresponding electron-phonon coupling. This is higher than predicted by density-functional theory, as a consequence of renormalization by Coulomb interactions.

cond-mat.mtrl-sci↗

Uniaxial Strain in Graphene by Raman Spectroscopy: G peak splitting, Gruneisen Parameters and Sample Orientation

Graphene is the two-dimensional building block for carbon allotropes of every other dimensionality. Since its experimental discovery, graphene continues to attract enormous interest, in particular as a new kind of matter, in which electron transport is governed by a Dirac-like wave equation, and as a model system for studying electronic and phonon properties of other, more complex, graphitic materials[1-4]. Here, we uncover the constitutive relation of graphene and probe new physics of its optical phonons, by studying its Raman spectrum as a function of uniaxial strain. We find that the doubly degenerate E2g optical mode splits in two components, one polarized along the strain and the other perpendicular to it. This leads to the splitting of the G peak into two bands, which we call G+ and G-, by analogy with the effect of curvature on the nanotube G peak[5-7]. Both peaks red shift with increasing strain, and their splitting increases, in excellent agreement with first-principles calculations. Their relative intensities are found to depend on light polarization, which provides a useful tool to probe the graphene crystallographic orientation with respect to the strain. The singly degenerate 2D and 2D' bands also red shift, but do not split for small strains. We study the Gruneisen parameters for the phonons responsible for the G, D and D' peaks. These can be used to measure the amount of uniaxial or biaxial strain, providing a fundamental tool for nanoelectronics, where strain monitoring is of paramount importance[8, 9]

cond-mat.mtrl-sci↗

Raman Spectroscopy of Graphene Edges

Graphene edges are of particular interest, since their chirality determines the electronic properties. Here we present a detailed Raman investigation of graphene flakes with well defined edges oriented at different crystallographic directions. The position, width and intensity of G and D peaks at the edges are studied as a function of the incident light polarization. The D-band is strongest for light polarized parallel to the edge and minimum for perpendicular orientation. Raman mapping shows that the D peak is localized in proximity of the edge. The D to G ratio does not always show a significant dependence on edge orientation. Thus, even though edges can appear macroscopically smooth and oriented at well defined angles, they are not necessarily microscopically ordered.

cond-mat.mtrl-sci↗