arXiv subjects

A. C. Ruggeri

Publications and source records attributed to A. C. Ruggeri.

At least 19 recordsLinked to original sources

arXiv2026

Construction, commissioning, and performance of the ENUBET demonstrator

A final full-size prototype of the instrumented decay tunnel of ENUBET, referred to as the Demonstrator, was constructed and its performance was tested during the 2022, 2023 and 2024 beam test campaigns at the CERN East Area facility. We demonstrate the full scalability of this specialized longitudinal sampling calorimeter technology, based on iron absorbers and scintillator tiles readout by wavelength-shifting fibers and SiPMs. In addition, we evaluate the channel-by- channel response and the performance in terms of electron energy resolution, linearity, and particle identification capabilities, using charged particle beams with energies up to 5 GeV. A comparison with the predictions of a GEANT4 simulation of the prototype is also presented. The results meet the requirements for neutrino monitoring through lepton identification in the decay tunnel and validate the ENUBET full simulation. Although some limitations have been identified, they can be readily addressed in future developments.

hep-ex↗

arXiv2026

Discovery of sulfur oxides in the ejecta of a B[e] supergiant

B[e] supergiants represent a rare class of luminous, evolved massive stars surrounded by dusty circumstellar disks. Since their intense UV fields were long thought to sterilize their surroundings, molecular detections beyond carbon monoxide have remained elusive, leaving their chemical reservoirs largely unexplored. Whether these environments can sustain a complex molecular chemistry is a fundamental question with significant astrochemical implications. Here we report the detection of chemically rich molecular gas surrounding the B[e] supergiant HD~87643, using ALMA observations. Our data reveal the presence of the sulfur oxides SO and SO$_2$ and other sulfur-bearing species, marking the first detection of these molecules in an early-type evolved massive star. We find a high fractional abundance of SO$_2$ relative to H$_2$, which our chemical modelling can reproduce in timescales as short as $\sim$10$^4$ yr in an oxygen-rich environment. These results indicate that the detected molecules trace a short-lived, rapidly evolving phase of out-of-equilibrium chemistry. Furthermore, we measure an anomalously low $^{32}$SO/$^{33}$SO, that we attribute to mass-independent fractionation driven by intense photochemistry. This mechanism mirrors processes proposed to explain the $^{33}$S excesses in the atmosphere of the Archaean Earth. Our findings suggest that B[e] supergiants could serve as unique laboratories for studying sulfur chemistry under extreme radiation conditions, opening potential avenues to investigate the fractionation processes that shaped the isotopic signatures found in the early geological record.

astro-ph.SR↗

arXiv2026

Evolved massive stars and their impact on their environment

The comprehension of the final stages of massive star evolution and their path toward the eventual supernova explosion necessarily involves the study of stellar winds and the circumstellar environment (CSE) surrounding them in the transitional phases, during which stellar winds and eruptive mass loss profoundly shape the surrounding environment. The study of the pre-supernova progenitors, from Red Supergiants, passing through the Luminous Blue Variable stage to Wolf-Rayet stars, is of key importance because, focusing on their nebulae, they directly prove the mass-loss activity of the star that, through wind and eruptive events, shapes the environment in which the supernova will explode. Such environment, interacting with the ejecta, will heavily affect supernovae spectrophotometric signatures. The Square Kilometre Array, with its extraordinary capabilities to combine high spatial resolution, sensitivity and wide frequency coverage will adress the most critical observational issues that currently prevent detailed characterization of CSE and, thus limit our ability to constrain its connections to supernova and remnants proprierties.

astro-ph.SR↗

arXiv2025

A scaling relationship for non-thermal radio emission from ordered magnetospheres - II. Investigating the efficiency of relativistic electron production in magnetospheres of BA-type stars

Magnetic BA stars host dipole-like magnetospheres. When detected as radio sources, their luminosities correlate with the magnetic field and rotation. Rotation is crucial because the mechanism undergirding the relativistic electron production is powered by centrifugal breakouts. CBOs occur wherever magnetic tension does not balance centrifugal force; the resulting magnetic reconnection provides particle acceleration. To investigate how physical conditions at the site of the CBOs affect the efficiency of the acceleration mechanism, we broadly explore the parameter space governing radio emission by increasing the sample of radio-loud magnetic stars. High-sensitivity VLA observations of 32 stars were performed in the hope of identifying new centrifugal magnetospheres and associated CBOs. We calculated gyro-synchrotron spectra using 3D modeling of a dipole-shaped magnetosphere. We evaluated combinations of parameters. The number of relativistic electrons was constrained by the need to produce the emission level predicted by the scaling relationship for the radio emission from magnetic BA stars. About half of the observed stars were detected, with luminosities in agreement with the expected values, reinforcing the robust nature of the scaling relationship for CBO-powered radio emission. Comparing the competing centrifugal and magnetic effects on plasma locked in a rigidly rotating magnetosphere, we located the site of CBOs and inferred the local plasma density. We then estimated the efficiency of the acceleration mechanism needed to produce enough non-thermal electrons to support the radio emission level. Given a constant acceleration efficiency, relativistic electrons represent a fixed fraction of the local thermal plasma. Thus, dense magnetospheres host more energetic particles than less dense ones; consequently, with other parameters similar, they are intrinsically brighter radio sources.

astro-ph.SR↗

arXiv2025

MeerKAT discovery of 164 compact radio rings toward the Galactic Plane

We report the discovery of 164 compact (radius < 1 arcmin) radio rings using MeerKAT 1.3 GHz data from the SARAO MeerKAT Galactic Plane Survey (l=2-60deg, 252-358deg, |b|<1.5deg) and the Galactic Centre mosaic, from a search aimed at identifying previously uncatalogued radio sources. Within this sample, approximately 19 per cent of the rings contain a central point radio source. A multiwavelength analysis reveals a striking diversity: about 40 per cent of the rings enclose an isolated infrared point source, 50 per cent exhibit an extended counterpart in the mid- or far-infrared, and several are only detected in the radio band. We found that 17 per cent of the rings in the sample are positionally coincident (within 5 arcsec) with known entries in SIMBAD, including unclassified infrared sources, spiral galaxies, young stellar objects and long-period variable candidates. Based on these matches and exploiting ancillary multiwavelength data and catalogues, we explore several formation scenarios for the rings, such as HII regions, planetary nebulae, mass-loss relics from evolved massive stars, supernova remnants, nova shells, galaxies, galaxy cluster lenses and odd radio circles. Tentative classifications are proposed for nearly 60 per cent of the sample. These results highlight the potential of MeerKAT to uncover previously undetected compact radio structures and, particularly, recover missing Galactic radio-emitting objects.

astro-ph.GA↗

arXiv2025

Broadband radio study of the supernova remnant Kes 73

Strong shocks occurring in supernova remnants (SNRs), and their interaction with an often anisotropic surrounding medium, make SNRs ideal laboratories for studying the production and acceleration of cosmic rays (CRs). Due to their complex morphology and phenomenology, different CR populations are expected to exist throughout the remnants, each characterized by its own energy spectrum. A comprehensive understanding of particle acceleration mechanisms and energetics in SNRs requires spatially resolved spectral and morphological studies. We want to highlight the crucial role of high-resolution radio images at high frequencies (> 10 GHz) for studying the spectral properties of different remnant regions and better constraining the models that describe their non-thermal emission from radio to $γ$-ray wavelengths. We studied the integrated radio spectrum of the SNR Kes 73 using single-dish observations performed with the Sardinia Radio Telescope (SRT) between 6.9 and 24.8 GHz, complemented by published data. The high-resolution map at 24.8 GHz was used to search for spatial variations in the spectral index across the remnant. We present the SRT images of Kes 73, providing the highest-frequency morphological and spectral characterization ever obtained for this source. By combining our 18.7 and 24.8 GHz maps with previously published interferometric images at 1.4 and 5 GHz, we identify a flatter spectrum in the western bright region compared to the rest of the shell. In the same region, we detect overlapping $^12$CO molecular emission and $γ$-ray radiation, providing strong evidence of SNR-molecular cloud interaction and enhanced CR production. We modelled the non-thermal radio to $γ$-ray emission from this region, favouring a lepto-hadronic scenario with a maximum electron energy of 1.1 TeV and a magnetic field strength of 25 $μ$G.

astro-ph.HE↗

arXiv2025

Assembly, testing, and installation of mPMT photosensor for the Water Cherenkov Test Experiment

The multi-Photomultiplier Tube (mPMT) photosensors will be used in the Water Cherenkov Test Experiment (WCTE) to efficiently detect the photons produced in the whole detector. One of the aims behind the development of WCTE is to test the technology and implement it in future water Cherenkov experiments such as the Hyper-Kamiokande experiment and its Intermediate Water Cherenkov Detector. Each mPMT is built using nineteen 3-inch PMTs arranged on a semi-spherical support matrix. In this paper, we describe the design and manufacture of the mechanical components, the procedures for casting an optical gel between PMTs and acrylic cover, and the overall assembly procedure of the mPMTs. Details of the electronics used in the mPMT modules are not included in this paper and will be presented in a separate publication. We also report on the R&D performed on the selection of the optical gel ratio along with transmittance measurements and the reflectance measurements performed on the aluminium reflector. We also present the optical tests performed on the mPMT module using a 405 nm LED and the resulting increase in the effective photosensitive area by surrounding the PMTs with a reflector. A summary of the production and installation of the mPMTs for the WCTE is also presented in this paper.

physics.ins-det↗

arXiv2025

nuSCOPE: A short-baseline neutrino beam at CERN for high-precision cross-section measurements

A new generation of neutrino cross-section experiments at the GeV scale is crucial in the precision era of oscillation physics and lepton flavor studies. In this document, we present a novel neutrino beam design that leverages the experience and R&D achievements of the NP06/ENUBET and NuTag Collaborations and explore its potential implementation at CERN. This beam enables flux monitoring at the percent level and provides a neutrino energy measurement independent of final state particle reconstruction at the neutrino detector. As a result, it eliminates the two primary sources of systematic uncertainty in cross-section measurements: flux normalization and energy bias caused by nuclear effects. We provide a detailed description of the beam technology and instrumentation, along with an overview of its physics potential, with particular emphasis on cross-sections relevant to DUNE and Hyper-Kamiokande.

hep-ex↗

arXiv2025

The ENUBET monitored neutrino beam and its implementation at CERN

The ENUBET project recently concluded the R&D for a site independent design of a monitored neutrino beam for high precision cross section measurements, in which the neutrino flux is inferred from the measurement of charged leptons in an instrumented decay tunnel. In this phase three fundamental results were obtained and will be discussed here: 1) a beamline not requiring a horn and relying on static focusing elements allows to perform a $ν_e$ cross section measurement in the DUNE energy range with 1% statistical uncertainty employing $10^{20}$ 400 GeV protons on target (pot) and a neutrino detector of the size of ProtoDUNE; 2) the instrumentation of the decay tunnel, based on a cost effective sampling calorimeter solution, has been tested with a large scale prototype achieving the performance required to identify positrons and muons from kaon decays with high signal-to-noise ratio; 3) the systematics budget on the neutrino flux is constrained at the 1% level by fitting the charged leptons observables measured in the decay tunnel. Based on these successful results ENUBET is now pursuing a study for a site dependent implementation at CERN in the framework of Physics Beyond Colliders. In this context a new beamline, able to enrich the neutrino flux at the energy of HK and to reduce by more than a factor 3 the needed pot, has been designed and is being optimized. The civil engineering and radioprotection studies for the siting of ENUBET in the North Area towards the two ProtoDUNEs are also in the scope of this work, with the goal of proposing a neutrino cross section experiment in 2026. The combined use of both the neutrino detectors and of the improved beamline would allow to perform cross section measurements with unprecedented precision in about 5 years with a proton request compatible with the needs of other users after CERN Long Shutdown 3.

hep-ex↗

arXiv2024

MeerKAT reveals a ghostly thermal radio ring towards the Galactic Centre

We present the serendipitous discovery of a new radio-continuum ring-like object nicknamed Kyklos (J1802-3353), with MeerKAT UHF and L-band observations. The radio ring, which resembles the recently discovered odd radio circles (ORCs), has a diameter of 80 arcsec and is located just 6 deg from the Galactic plane. However, Kyklos exhibits an atypical thermal radio-continuum spectrum (α = -0.1 +/- 0.3), which led us to explore different possible formation scenarios. We concluded that a circumstellar shell around an evolved massive star, possibly a Wolf-Rayet, is the most convincing explanation with the present data.

astro-ph.GA↗

arXiv2024

Self-supervised contrastive learning of radio data for source detection, classification and peculiar object discovery

New advancements in radio data post-processing are underway within the SKA precursor community, aiming to facilitate the extraction of scientific results from survey images through a semi-automated approach. Several of these developments leverage deep learning (DL) methodologies for diverse tasks, including source detection, object or morphology classification, and anomaly detection. Despite substantial progress, the full potential of these methods often remains untapped due to challenges associated with training large supervised models, particularly in the presence of small and class-unbalanced labelled datasets. Self-supervised learning has recently established itself as a powerful methodology to deal with some of the aforementioned challenges, by directly learning a lower-dimensional representation from large samples of unlabelled data. The resulting model and data representation can then be used for data inspection and various downstream tasks if a small subset of labelled data is available. In this work, we explored contrastive learning methods to learn suitable radio data representation from unlabelled images taken from the ASKAP EMU and SARAO MeerKAT GPS surveys. We evaluated trained models and the obtained data representation over smaller labelled datasets, also taken from different radio surveys, in selected analysis tasks: source detection and classification, and search for objects with peculiar morphology. For all explored downstream tasks, we reported and discussed the benefits brought by self-supervised foundational models built on radio data.

astro-ph.IM↗

arXiv2023

Design and performance of the ENUBET monitored neutrino beam

The ENUBET project is aimed at designing and experimentally demonstrating the concept of monitored neutrino beams. These novel beams are enhanced by an instrumented decay tunnel, whose detectors reconstruct large-angle charged leptons produced in the tunnel and give a direct estimate of the neutrino flux at the source. These facilities are thus the ideal tool for high-precision neutrino cross-section measurements at the GeV scale because they offer superior control of beam systematics with respect to existing facilities. In this paper, we present the first end-to-end design of a monitored neutrino beam capable of monitoring lepton production at the single particle level. This goal is achieved by a new focusing system without magnetic horns, a 20 m normal-conducting transfer line for charge and momentum selection, and a 40 m tunnel instrumented with cost-effective particle detectors. Employing such a design, we show that percent precision in cross-section measurements can be achieved at the CERN SPS complex with existing neutrino detectors.

hep-ex↗

arXiv2020

The ENUBET Beamline

The ENUBET ERC project (2016-2021) is studying a narrow band neutrino beam where lepton production can be monitored at single particle level in an instrumented decay tunnel. This would allow to measure $ν_μ$ and $ν_{e}$ cross sections with a precision improved by about one order of magnitude compared to present results. In this proceeding we describe a first realistic design of the hadron beamline based on a dipole coupled to a pair of quadrupole triplets along with the optimisation guidelines and the results of a simulation based on G4beamline. A static focusing design, though less efficient than a horn-based solution, results several times more efficient than originally expected. It works with slow proton extractions reducing drastically pile-up effects in the decay tunnel and it paves the way towards a time-tagged neutrino beam. On the other hand a horn-based transferline would ensure higher yields at the tunnel entrance. The first studies conducted at CERN to implement the synchronization between a few ms proton extraction and a horn pulse of 2-10 ms are also described.

physics.acc-ph↗

arXiv2020

The hadronic beamline of the ENUBET neutrino beam

The ENUBET ERC project (2016-2021) is studying a facility based on a narrow band beam capable of constraining the neutrino fluxes normalization through the monitoring of the associated charged leptons in an instrumented decay tunnel. A key element of the project is the design and optimization of the hadronic beamline. In this proceeding we present progress on the studies of the proton extraction schemes. We also show a realistic implementation and simulation of the beamline.

physics.acc-ph↗

arXiv2020

The ENUBET positron tagger prototype: construction and testbeam performance

A prototype for the instrumented decay tunnel of ENUBET was tested in 2018 at the CERN East Area facility with charged particles up to 5 GeV. This detector is a longitudinal sampling calorimeter with lateral scintillation light readout. The calorimeter was equipped by an additional "$t_0$-layer" for timing and photon discrimination. The performance of this detector in terms of electron energy resolution, linearity, response to muons and hadron showers are presented in this paper and compared with simulation. The $t_0$-layer was studied both in standalone mode using pion charge exchange and in combined mode with the calorimeter to assess the light yield and the 1 mip/2 mip separation capability. We demonstrate that this system fulfills the requirements for neutrino physics applications and discuss performance and additional improvements.

physics.ins-det↗

arXiv2020

Polysiloxane-based scintillators for shashlik calorimeters

We present the first application of polysiloxane-based scintillators as active medium in a shashlik sampling calorimeter. These results were obtained from a testbeam campaign of a $\sim$6$\times$6$\times$45 cm$^3$ (13 $X_0$ depth) prototype. A Wavelength Shifting fiber array of 36 elements runs perpendicularly to the stack of iron (15 mm) and polysiloxane scintillator (15 mm) tiles with a density of about one over cm$^2$. Unlike shashlik calorimeters based on plastic organic scintillators, here fibers are optically matched with the scintillator without any intermediate air gap. The prototype features a compact light readout based on Silicon Photo-Multipliers embedded in the bulk of the detector. The detector was tested with electrons, pions and muons with energies ranging from 1 to 7 GeV at the CERN-PS. This solution offers a highly radiation hard detector to instrument the decay region of a neutrino beam, providing an event-by-event measurement of high-angle decay products associated with neutrino production (ENUBET, Enhanced NeUtrino BEams from kaon Tagging, ERC project). The results in terms of light yield, uniformity and energy resolution, are compared to a similar calorimeter built with ordinary plastic scintillators.

physics.ins-det↗

arXiv2019

Performances of a resistive MicroMegas module for the Time Projection Chambers of the T2K Near Detector upgrade

An upgrade of the Near Detector of the T2K long baseline neutrino oscillation experiment, ND280, has been proposed. This upgrade will include two new Time Projection Chambers, each equipped with 16 resistive MicroMegas modules for gas amplification. A first prototype of resistive MicroMegas has been designed, built, installed in the HARP field cage, and exposed to a beam of charged particles at CERN. The data have been used to characterize the performances of the resistive MicroMegas module. A spatial resolution of 300 $μm$ and a deposited energy resolution of 9% were observed for horizontal electrons crossing the TPCs at 30 cm from the anode. Such performances fully satisfy the requirements for the upgrade of the ND280 TPC.

physics.ins-det↗

arXiv2019

The ENUBET narrow band neutrino beam

The narrow band beam of ENUBET is the first implementation of the "monitored neutrino beam" technique proposed in 2015. ENUBET has been designed to monitor lepton production in the decay tunnel of neutrino beams and to provide a 1% measurement of the neutrino flux at source. In particular, the three body semi-leptonic decay of kaons monitored by large angle positron production offers a fully controlled $ν_{e}$ source at the GeV scale for a new generation of short baseline experiments. In this contribution the performances of the positron tagger prototypes tested at CERN beamlines in 2016-2018 are presented.

physics.ins-det↗