arXiv subjects

A. Cacciuto

Publications and source records attributed to A. Cacciuto.

At least 19 recordsLinked to original sources

arXiv2026

Self-avoiding tethered surfaces are always flat

The scaling behavior of fully flexible elastic tethered surfaces has been debated for decades. Some theories predict that self-avoiding surfaces would crumple in the absence of bending rigidity, while most simulations suggested that they would remain flat. Recent simulations on ideal membranes with lattice perforations suggest that systematically removing surface area from a membrane may provide an alternative way to crumpling self-avoiding surfaces. We perform extensive numerical simulations of two models of fully flexible elastic tethered surfaces in which self-avoidance can be systematically and continuously tuned to the ideal limit. We show that in the thermodynamic limit, these surfaces remain flat with a size exponent $\nu=1$ for any finite degree of self-avoidance, with or without membrane perforations.

cond-mat.soft↗

arXiv2025

The shape of cleaved tethered membranes

A remarkable property of flexible self-avoiding elastic surfaces (membranes) is that they remain flat at all temperatures, even in the absence of a bending rigidity or in the presence of active fluctuations. Here, we report numerical results of these surfaces wherein we alter their topology by systematically cleaving internal bonds. While it is known that a random removal of membrane bonds does not disrupt the overall extended shape of the membrane, we find that cleaving an elastic surface with longitudinal parallel cuts leads to its systematic collapse into a number of complex morphologies that can be controlled by altering the number and length of the inserted cuts. For the simpler case of membranes with bending rigidity but in the absence of self-avoidance, we find that the radius of gyration of the surface as a function of number of cuts is represented by a universal master curve when the variables are appropriately rescaled.

cond-mat.soft↗

arXiv2023

Spontaneous crumpling of active spherical shells

The existence of a crumpled phase for self-avoiding elastic surfaces was postulated more than three decades ago using simple Flory-like scaling arguments. Despite much effort, its stability in a microscopic environment has been the subject of much debate. In this paper we show how a crumpled phase develops reliably and consistently upon subjecting a thin spherical shell to active fluctuations. We find a master curve describing how the relative volume of a shell changes with the strength of the active forces, that applies for every shell independent of size and elastic constants. Furthermore, we extract a general expression for the onset active force beyond which a shell begins to crumple. Finally, we calculate how the size exponent varies along the crumpling curve.

cond-mat.soft↗

arXiv2023

The crumpling transition of active tethered membranes

We perform numerical simulations of active ideal and self-avoiding tethered membranes. Passive ideal membranes with bending interactions are known to exhibit a continuous crumpling transition between a low temperature flat phase and a high temperature crumpled phase. Conversely, self-avoiding membranes remain in an extended (flat) phase for all temperatures even in the absence of a bending energy. We find that the introduction of active fluctuations into the system produces a phase behavior that is overall consistent with that observed for passive membranes. The phases and the nature of the transition for ideal membranes is unchanged and active fluctuations can be remarkably accounted for by a simple rescaling of the temperature. For the self-avoiding membrane, we find that the extended phase is preserved even in the presence of very large active fluctuations.

cond-mat.soft↗

arXiv2022

Rectification of Confined Soft Vesicles Containing Active Particles

One of the most promising features of active systems is that they can extract energy from their environment and convert it to mechanical work. Self propelled particles enable rectification when in contact with rigid boundaries. They can rectify their own motion when confined in asymmetric channels and that of microgears. In this paper, we study the shape fluctuations of two dimensional flexible vesicles containing active Brownian particles. We show how these fluctuations not only are capable of easily squeezing a vesicle through narrow openings, but are also responsible for its rectification when placed within asymmetric confining channels (ratchetaxis). We detail the conditions under which this process can be optimized, and sort out the complex interplay between elastic and active forces responsible for the directed motion of the vesicle across these channels.

cond-mat.soft↗

arXiv2022

Effective forces between active polymers

The characterization of the interactions between two fully flexible self-avoiding polymers is one of the classic and most important problems in polymer physics. In this paper we measure these interactions in the presence of active fluctuations. We introduce activity into the problem using two of the most popular models in this field. One where activity is effectively embedded into the monomers' dynamics, and the other where passive polymers fluctuate in an explicit bath of active particles. We establish the conditions under which the interaction between active polymers can be mapped into the classical passive problem. We observe that the active bath can drive the development of strong attractive interactions between the polymers and that, upon enforcing a significant degree of overlap, they come together to form a single double-stranded unit. A phase diagram tracing this change in conformational behavior is also reported.

cond-mat.soft↗

arXiv2021

Self-assembly of active amphiphilic Janus particles

In this article, we study the phenomenology of a two dimensional dilute suspension of active amphiphilic Janus particles. We analyze how the morphology of the aggregates emerging from their self-assembly depends on the strength and the direction of the active forces. We systematically explore and contrast the phenomenologies resulting from particles with a range of attractive patch coverages. Finally, we illustrate how the geometry of the colloids and the directionality of their interactions can be used to control the physical properties of the assembled active aggregates and suggest possible strategies to exploit self-propulsion as a tunable driving force for self-assembly.

cond-mat.soft↗

arXiv2021

An active approach to colloidal self-assembly

In this review we discuss recent advances in the self-assembly of self-propelled colloidal particles and highlight some of the most exciting results in this field with a specific focus on dry active matter. We explore this phenomenology through the lens of the complexity of the colloidal building blocks. We begin by considering the behavior of isotropic spherical particles. We then discuss the case of amphiphilic and dipolar Janus particles. Finally, we show how the geometry of the colloids and/or the directionality of their interactions can be used to control the physical properties of the assembled active aggregates, and suggest possible strategies on how to exploit activity as a tunable driving force for self-assembly. The unique properties of active colloids lend promise for the design of the next generation of functional, environment-sensing microstructures able to perform specific tasks in an autonomous and targeted manner.

cond-mat.soft↗

arXiv2020

The Coil-Globule transition in self-avoiding active polymers

We perform numerical simulations of an active fully flexible self-avoiding polymer as a function of the quality of the embedding solvent described in terms of an effective monomer-monomer interaction. Specifically, by extracting the Flory exponent of the active polymer under different conditions, we are able to pin down the location of the coil-globule transition for different strength of the active forces. Remarkably, we find that a simple rescaling of the temperature is capable of qualitatively capture the dependence of the $\Theta$-point of the polymer with the amplitude of the active fluctuations. We discuss the limits of this mapping, and suggest that a negative active pressure between the monomers, not unlike the one that has already been found in suspensions of active hard spheres, may also be present in active polymers.

cond-mat.soft↗

arXiv2020

Universal reshaping of arrested colloidal gels via active doping

Colloids that interact via a short-range attraction serve as the primary building blocks for a broad range of self-assembled materials. However, one of the well-known drawbacks to this strategy is that these building blocks rapidly and readily condense into a metastable colloidal gel. Using computer simulations, we illustrate how the addition of a small fraction of purely repulsive self-propelled colloids, a technique referred to as active doping, can prevent the formation of this metastable gel state and drive the system toward its thermodynamically favored crystalline target structure. The simplicity and robust nature of this strategy offers a systematic and generic pathway to improving the self-assembly of a large number of complex colloidal structures. We discuss in detail the process by which this feat is accomplished and provide quantitative metrics for exploiting it to modulate self-assembly. We provide evidence for the generic nature of this approach by demonstrating that it remains robust under a number of different anisotropic short-ranged pair interactions in both two and three dimensions. In addition, we report on a novel microphase in mixtures of passive and active colloids. For a broad range of self-propelling velocities, it is possible to stabilize a suspension of fairly monodisperse finite-size crystallites. Surprisingly, this microphase is also insensitive to the underlying pair interaction between building blocks. The active stabilization of these moderately-sized monodisperse clusters is quite remarkable and should be of great utility in the design of hierarchical self-assembly strategies. This work further bolsters the notion that active forces can play a pivotal role in directing colloidal self-assembly.

cond-mat.soft↗

arXiv2016

Activity-assisted self-assembly of colloidal particles

We outline a basic strategy of how self-propulsion can be used to improve the yield of a typical colloidal self-assembly process. The success of this approach is predicated on the thoughtful design of the colloidal building block as well as how self-propulsion is endowed to the particle. As long as a set of criteria are satisfied, it is possible to significantly increase the rate of self-assembly, and greatly expand the window in parameter space where self-assembly can occur. In addition, we show that by tuning the relative on/off time of the self-propelling force it is possible to modulate the effective speed of the colloids allowing for further optimization of the self-assembly process.

cond-mat.soft↗

arXiv2015

Anomalous dynamics of an elastic membrane in an active fluid

Using numerical simulations, we characterized the behavior of an elastic membrane immersed in an active fluid. Our findings reveal a nontrivial folding and re-expansion of the membrane that is controlled by the interplay of its resistance to bending and the self-propulsion strength of the active components in solution. We show how flexible membranes tend to collapse into multi-folded states, whereas stiff membranes oscillates between an extended configuration and a singly folded state. This study provides a simple example of how to exploit the random motion of active particles to perform mechanical work at the micro-scale.

cond-mat.soft↗

arXiv2014

The role of particle shape in active depletion

Using numerical simulations, we study how a solution of small active disks, acting as depletants, induces effective interactions on large passive colloids. Specifically, we analyze how the range, strength, and sign of these interactions are crucially dependent on the shape of the colloids. Our findings indicate that while colloidal rods experience a long-ranged predominantly attractive interaction, colloidal disks feel a purely repulsive force that is short-ranged in nature and grows in strength with the size ratio between the colloids and active depletants. For colloidal rods, simple scaling arguments are proposed to characterize the strength of these induced interactions.

cond-mat.soft↗

arXiv2014

Curvature Induced Activation of a Passive Tracer in an Active Bath

We use numerical simulations to study the motion of a large asymmetric tracer immersed in a low density suspension of self-propelled nanoparticles in two dimensions. Specifically, we analyze how the curvature of the tracer affects its translational and rotational motion in an active environment. We find that even very small amounts of curvature are sufficient for the active bath to impart directed motion to the tracer which results in its effective activation. We propose simple scaling arguments to characterize this induced activity in terms of the curvature of the tracer and the strength of the self-propelling force. Our results suggest new ways of controlling the transport properties of passive tracers in an active medium by carefully tailoring their geometry.

cond-mat.soft↗

arXiv2013

Living clusters and crystals from low density suspensions of active colloids

Recent studies aimed at investigating artificial analogs of bacterial colonies have shown that low-density suspensions of self-propelled particles confined in two dimensions can assemble into finite aggregates that merge and split, but have a typical size that remains constant (living clusters). In this Letter we address the problem of the formation of living clusters and crystals of active particles in three dimensions. We study two systems: self-propelled particles interacting via a generic attractive potential and colloids that can move towards each other as a result of active agents (e.g. by molecular motors). In both cases fluid-like `living' clusters form. We explain this general feature in terms of the balance between active forces and regression to thermodynamic equilibrium. This balance can be quantified in terms of a dimensionless number that allows us to collapse the observed clustering behaviour onto a universal curve. We also discuss how active motion affects the kinetics of crystal formation.

cond-mat.soft↗

arXiv2013

Anomalous Thermomechanical Properties of a Self-propelled Colloidal Fluid

We use numerical simulations to compute the equation of state of a suspension of spherical, self-propelled nanoparticles. We study in detail the effect of excluded volume interactions and confinement as a function of the system temperature, concentration and strength of the propulsion. We find a striking non-monotonic dependence of the pressure with the temperature, and provide simple scaling arguments to predict and explain the occurrence of such an anomalous behavior. We conclude the paper by explicitly showing how our results have an important implications for the effective forces exerted by fluids of self-propelled particles on passive, larger components.

cond-mat.soft↗

arXiv2012

Phase separation and rotor self-assembly in active particle suspensions

Adding a non-adsorbing polymer to passive colloids induces an attraction between the particles via the `depletion' mechanism. High enough polymer concentrations lead to phase separation. We combine experiments, theory and simulations to demonstrate that using active colloids (such as motile bacteria) dramatically changes the physics of such mixtures. First, significantly stronger inter-particle attraction is needed to cause phase separation. Secondly, the finite size aggregates formed at lower inter-particle attraction show unidirectional rotation. These micro-rotors demonstrate the self assembly of functional structures using active particles. The angular speed of the rotating clusters scales approximately as the inverse of their size, which may be understood theoretically by assuming that the torques exerted by the outermost bacteria in a cluster add up randomly. Our simulations suggest that both the suppression of phase separation and the self assembly of rotors are generic features of aggregating swimmers, and should therefore occur in a variety of biological and synthetic active particle systems.

cond-mat.soft↗

arXiv2003

Grain Boundary Scars and Spherical Crystallography

We describe experimental investigations of the structure of two-dimensional spherical crystals. The crystals, formed by beads self-assembled on water droplets in oil, serve as model systems for exploring very general theories about the minimum energy configurations of particles with arbitrary repulsive interactions on curved surfaces. Above a critical system size we find that crystals develop distinctive high-angle grain boundaries, or scars, not found in planar crystals. The number of excess defects in a scar is shown to grow linearly with the dimensionless system size. The observed slope is expected to be universal, independent of the microscopic potential.

cond-mat.soft↗