arXiv subjects

A. Ciardi

Publications and source records attributed to A. Ciardi.

At least 37 records · Page 2Linked to original sources

arXiv2018

Laboratory radiative accretion shocks on GEKKO XII laser facility for POLAR project

A new target design is presented to model high-energy radiative accretion shocks in polars. In this paper, we present the experimental results obtained on the GEKKO XII laser facility for the POLAR project. The experimental results are compared with 2D FCI2 simulations to characterize the dynamics and the structure of plasma flow before and after the collision. The good agreement between simulations and experimental data confirm the formation of a reverse shock where cooling losses start modifying the post-shock region. With the multi-material structure of the target, a hydrodynamic collimation is exhibited and a radiative structure coupled with the reverse shock is highlighted in both experimental data and simulations. The flexibility on the laser energy produced on GEKKO XII, allowed us to produce high-velocity flows and study new and interesting radiation hydrodynamic regimes between those obtained on the LULI2000 and Orion laser facilities.

astro-ph.HE↗

arXiv2018

Ion heating and magnetic flux pile-up in a magnetic reconnection experiment with super-Alfvenic plasma inflows

This work presents a magnetic reconnection experiment in which the kinetic, magnetic and thermal properties of the plasma each play an important role in the overall energy balance and structure of the generated reconnection layer. Magnetic reconnection occurs during the interaction of continuous and steady flows of super-Alfvenic, magnetized, aluminum plasma, which collide in a geometry with two-dimensional symmetry, producing a stable and long-lasting reconnection layer. Optical Thomson scattering measurements show that when the layer forms, ions inside the layer are more strongly heated than electrons, reaching temperatures of Ti~ZTe>300 eV - much greater than can be expected from strong shock and viscous heating alone. Later in time, as the plasma density in the layer increases, the electron and ion temperatures are found to equilibrate, and a constant plasma temperature is achieved through a balance of the heating mechanisms and radiative losses of the plasma. Measurements from Faraday rotation polarimetry also indicate the presence of significant magnetic field pile-up occurring at the boundary of the reconnection region, which is consistent with the super-Alfvenic velocity of the inflows.

physics.plasm-ph↗

arXiv2018

An Experimental Platform for Pulsed-Power Driven Magnetic Reconnection

We describe a versatile pulsed-power driven platform for magnetic reconnection experiments, based on exploding wire arrays driven in parallel [Suttle, L. G. et al. PRL, 116, 225001]. This platform produces inherently magnetised plasma flows for the duration of the generator current pulse (250 ns), resulting in a long-lasting reconnection layer. The layer exists for long enough to allow evolution of complex processes such as plasmoid formation and movement to be diagnosed by a suite of high spatial and temporal resolution laser-based diagnostics. We can access a wide range of magnetic reconnection regimes by changing the wire material or moving the electrodes inside the wire arrays. We present results with aluminium and carbon wires, in which the parameters of the inflows and the layer which forms are significantly different. By moving the electrodes inside the wire arrays, we change how strongly the inflows are driven. This enables us to study both symmetric reconnection in a range of different regimes, and asymmetric reconnection.

physics.plasm-ph↗

arXiv2017

Evidence for disks at an early stage in class 0 protostars?

The formation epoch of protostellar disks is debated because of the competing roles of rotation, turbulence, and magnetic fields in the early stages of low-mass star formation. Magnetohydrodynamics simulations of collapsing cores predict that rotationally supported disks may form in strongly magnetized cores through ambipolar diffusion or misalignment between the rotation axis and the magnetic field orientation. Detailed studies of individual sources are needed to cross check the theoretical predictions. We present 0.06-0.1" resolution images at 350 GHz toward B1b-N and B1b-S, which are young class 0 protostars, possibly first hydrostatic cores. The images have been obtained with ALMA, and we compare these data with magnetohydrodynamics simulations of a collapsing turbulent and magnetized core. The submillimeter continuum emission is spatially resolved by ALMA. Compact structures with optically thick 350 GHz emission are detected toward both B1b-N and B1b-S, with 0.2 and 0.35" radii (46 and 80 au at the Perseus distance of 230 pc), within a more extended envelope. The flux ratio between the compact structure and the envelope is lower in B1b-N than in B1b-S, in agreement with its earlier evolutionary status. The size and orientation of the compact structure are consistent with 0.2" resolution 32 GHz observations obtained with the Very Large Array as a part of the VANDAM survey, suggesting that grains have grown through coagulation. The morphology, temperature, and densities of the compact structures are consistent with those of disks formed in numerical simulations of collapsing cores. Moreover, the properties of B1b-N are consistent with those of a very young protostar, possibly a first hydrostatic core. These observations provide support for the early formation of disks around low-mass protostars.

astro-ph.SR↗

arXiv2017

Formation and Structure of a Current Sheet in Pulsed-Power Driven Magnetic Reconnection Experiments

We describe magnetic reconnection experiments using a new, pulsed-power driven experimental platform in which the inflows are super-sonic but sub-Alfvénic.The intrinsically magnetised plasma flows are long lasting, producing a well-defined reconnection layer that persists over many hydrodynamic time scales.The layer is diagnosed using a suite of high resolution laser based diagnostics which provide measurements of the electron density, reconnecting magnetic field, inflow and outflow velocities and the electron and ion temperatures.Using these measurements we observe a balance between the power flow into and out of the layer, and we find that the heating rates for the electrons and ions are significantly in excess of the classical predictions. The formation of plasmoids is observed in laser interferometry and optical self-emission, and the magnetic O-point structure of these plasmoids is confirmed using magnetic probes.

physics.plasm-ph↗

arXiv2017

Laboratory unravelling of matter accretion in young stars

Accretion dynamics in the forming of young stars is still object of debate because of limitations in observations and modelling. Through scaled laboratory experiments of collimated plasma accretion onto a solid in the presence of a magnetic field, we open first window on this phenomenon by tracking, with spatial and temporal resolution, the dynamics of the system and simultaneously measuring multiband emissions. We observe in these experiments that matter, upon impact, is laterally ejected from the solid surface, then refocused by the magnetic field toward the incoming stream. Such ejected matter forms a plasma shell that envelops the shocked core, reducing escaped X-ray emission. This demonstrates one possible structure reconciling current discrepancies between mass accretion rates derived from X-ray and optical observations.

astro-ph.SR↗

arXiv2017

Anomalous Heating and Plasmoid Formation in a Driven Magnetic Reconnection Experiment

We present a detailed study of magnetic reconnection in a quasi-two-dimensional pulsed-power driven laboratory experiment. Oppositely directed magnetic fields $(B=3$ T), advected by supersonic, sub-Alfvénic carbon plasma flows $(V_{in}=50$ km/s), are brought together and mutually annihilate inside a thin current layer ($δ=0.6$ mm). Temporally and spatially resolved optical diagnostics, including interferometry, Faraday rotation imaging and Thomson scattering, allow us to determine the structure and dynamics of this layer, the nature of the inflows and outflows and the detailed energy partition during the reconnection process. We measure high electron and ion temperatures $(T_e=100$ eV, $T_i=600$ eV), far in excess of what can be attributed to classical (Spitzer) resistive and viscous dissipation. We observe the repeated formation and ejection of plasmoids, which we interpret as evidence of two-fluid effects in our experiment.

physics.plasm-ph↗

arXiv2015

Bow shock fragmentation driven by a thermal instability in laboratory-astrophysics experiments

The role of radiative cooling during the evolution of a bow shock was studied in laboratory-astrophysics experiments that are scalable to bow shocks present in jets from young stellar objects. The laboratory bow shock is formed during the collision of two counter-streaming, supersonic plasma jets produced by an opposing pair of radial foil Z-pinches driven by the current pulse from the MAGPIE pulsed-power generator. The jets have different flow velocities in the laboratory frame and the experiments are driven over many times the characteristic cooling time-scale. The initially smooth bow shock rapidly develops small-scale non-uniformities over temporal and spatial scales that are consistent with a thermal instability triggered by strong radiative cooling in the shock. The growth of these perturbations eventually results in a global fragmentation of the bow shock front. The formation of a thermal instability is supported by analysis of the plasma cooling function calculated for the experimental conditions with the radiative packages ABAKO/RAPCAL.

physics.plasm-ph↗

arXiv2012

Astrophysics of magnetically collimated jets generated from laser-produced plasmas

The generation of astrophysically relevant jets, from magnetically collimated, laser-produced plasmas, is investigated through three-dimensional, magneto-hydrodynamic simulations. We show that for laser intensities I ~ 10^12 - 10^14 W/cm^2, a magnetic field in excess of ~ 0.1 MG, can collimate the plasma plume into a prolate cavity bounded by a shock envelope with a standing conical shock at its tip, which re-collimates the flow into a super magneto-sonic jet beam. This mechanism is equivalent to astrophysical models of hydrodynamic inertial collimation, where an isotropic wind is focused into a jet by a confining circumstellar torus-like envelope. The results suggest an alternative mechanism for a large-scale magnetic field to produce jets from wide-angle winds. (abridged version)

physics.plasm-ph↗

arXiv2011

Numerical study of jets produced by conical wire arrays on the Magpie pulsed power generator

The aim of this work is to model the jets produced by conical wire arrays on the MAGPIE generator, and to design and test new setups to strengthen the link between laboratory and astrophysical jets. We performed the modelling with direct three-dimensional magneto-hydro-dynamic numerical simulations using the code GORGON. We applied our code to the typical MAGPIE setup and we successfully reproduced the experiments. We found that a minimum resolution of approximately 100 is required to retrieve the unstable character of the jet. We investigated the effect of changing the number of wires and found that arrays with less wires produce more unstable jets, and that this effect has magnetic origin. Finally, we studied the behaviour of the conical array together with a conical shield on top of it to reduce the presence of unwanted low density plasma flows. The resulting jet is shorter and less dense.

physics.plasm-ph↗

arXiv2010

Experimental Studies of Magnetically Driven Plasma Jets

We present experimental results on the formation of supersonic, radiatively cooled jets driven by pressure due to the toroidal magnetic field generated by the 1.5 MA, 250 ns current from the MAGPIE generator. The morphology of the jet produced in the experiments is relevant to astrophysical jet scenarios in which a jet on the axis of a magnetic cavity is collimated by a toroidal magnetic field as it expands into the ambient medium. The jets in the experiments have similar Mach number, plasma beta and cooling parameter to those in protostellar jets. Additionally the Reynolds, magnetic Reynolds and Peclet numbers are much larger than unity, allowing the experiments to be scaled to astrophysical flows. The experimental configuration allows for the generation of episodic magnetic cavities, suggesting that periodic fluctuations near the source may be responsible for some of the variability observed in astrophysical jets. Preliminary measurements of kinetic, magnetic and Poynting energy of the jets in our experiments are presented and discussed, together with estimates of their temperature and trapped toroidal magnetic field.

astro-ph.SR↗

arXiv2009

Disk formation during collapse of magnetized protostellar cores

In the context of star and planet formation, understanding the formation of disks is of fundamental importance. Previous studies found that the magnetic field has a very strong impact on the collapse of a prestellar cloud, particularly in possibly suppressing the formation of a disk even for relatively modest values of the magnetic intensity. Since observations infer that cores have a substantial level of magnetization, this raises the question of how disks form. However, most studies have been restricted to the case in which the initial angle, $α$, between the magnetic field and the rotation axis equals 0$^\circ$. We explore and analyse the influence of non aligned configurations on disk formation. We perform 3D ideal MHD, AMR numerical simulations for various values of $μ$, the ratio of the mass-to-flux to the critical mass-to-flux, and various values of $α$. We find that disks form more easily as $α$ increases from 0 to 90$^\circ$. We propose that as the magnetized pseudo-disks become thicker with increasing $α$, the magnetic braking efficiency is lowered. We also find that even small values of $α$ ($\simeq$ 10-20$^\circ$) show significant differences with the alligned case. Within the framework of ideal MHD and for our choice of initial conditions, centrifugally supported disks cannot form for values of $μ$ smaller than $\simeq$3, if the magnetic field and the rotation axis are perpendicular, and smaller than about $\simeq$5-10 when they are perfectly aligned.

astro-ph.GA↗

arXiv2009

Formation of Episodic Magnetically Driven Radiatively Cooled Plasma Jets in the Laboratory

We report on experiments in which magnetically driven radiatively cooled plasma jets were produced by a 1 MA, 250 ns current pulse on the MAGPIE pulsed power facility. The jets were driven by the pressure of a toroidal magnetic field in a ''magnetic tower'' jet configuration. This scenario is characterized by the formation of a magnetically collimated plasma jet on the axis of a magnetic ''bubble'', confined by the ambient medium. The use of a radial metallic foil instead of the radial wire arrays employed in our previous work allows for the generation of episodic magnetic tower outflows which emerge periodically on timescales of ~30 ns. The subsequent magnetic bubbles propagate with velocities reaching ~300 km/s and interact with previous eruptions leading to the formation of shocks.

astro-ph.SR↗

arXiv2008

Supersonic radiatively cooled rotating flows and jets in the laboratory

The first laboratory astrophysics experiments to produce a radiatively cooled plasma jet with dynamically significant angular momentum are discussed. A new configuration of wire array z-pinch, the twisted conical wire array, is used to produce convergent plasma flows each rotating about the central axis. Collision of the flows produces a standing shock and jet that each have supersonic azimuthal velocities. By varying the twist angle of the array, the rotation velocity of the system can be controlled, with jet rotation velocities reaching ~20% of the propagation velocity.

astro-ph↗

arXiv2007

Curved Herbig-Haro Jets: Simulations and Experiments

Herbig-Haro jets often show some degree of curvature along their path, in many cases produced by the ram pressure of a side-wind. We present simulations of both laboratory and astrophysical curved jets and experimental results from laboratory experiments. We discuss the properties and similarities of the laboratory and astrophysical flow, which show the formation of internal shocks and working surfaces. In particular the results illustrate how the break-up of the bow-shock and clumps in the flow are produced without invoking jet variability; we also discuss how jet rotation reduces the growth of the Rayleigh-Taylor instability in curved jets.

astro-ph↗

arXiv2006

The evolution of magnetic tower jets in the laboratory

The evolution of laboratory produced magnetic jets is followed numerically through three-dimensional, non-ideal magnetohydrodynamic simulations. The experiments are designed to study the interaction of a purely toroidal field with an extended plasma background medium. The system is observed to evolve into a structure consisting of an approximately cylindrical magnetic cavity with an embedded magnetically confined jet on its axis. The supersonic expansion produces a shell of swept-up shocked plasma which surrounds and partially confines the magnetic tower. Currents initially flow along the walls of the cavity and in the jet but the development of current-driven instabilities leads to the disruption of the jet and a re-arrangement of the field and currents. The top of the cavity breaks-up and a well collimated, radiatively cooled, 'clumpy' jet emerges from the system.

astro-ph↗

arXiv2006

3D MHD Simulations of Laboratory Plasma Jets

Jets and outflows are thought to be an integral part of accretion phenomena and are associated with a large variety of objects. In these systems, the interaction of magnetic fields with an accretion disk and/or a magnetized central object is thought to be responsible for the acceleration and collimation of plasma into jets and wider angle flows. In this paper we present three-dimensional MHD simulations of magnetically driven, radiatively cooled laboratory jets that are produced on the MAGPIE experimental facility. The general outflow structure comprises an expanding magnetic cavity which is collimated by the pressure of an extended plasma background medium, and a magnetically confined jet which develops within the magnetic cavity. Although this structure is intrinsically transient and instabilities in the jet and disruption of the magnetic cavity ultimately lead to its break-up, a well collimated, knotty jet still emerges from the system; such clumpy morphology is reminiscent of that observed in many astrophysical jets. The possible introduction in the experiments of angular momentum and axial magnetic field will also be discussed.

astro-ph↗

arXiv2005

Magnetic Tower Outflows from a Radial Wire Array Z-pinch

We present the first results of high energy density laboratory astrophysics experiments which explore the evolution of collimated outflows and jets driven by a toroidal magnetic field. The experiments are scalable to astrophysical flows in that critical dimensionless numbers such as the Mach number, the plasma beta and the magnetic Reynolds number are all in the astrophysically appropriate ranges. Our experiments use the MAGPIE pulsed power machine and allow us to explore the role of magnetic pressure in creating and collimating the outflow as well as showing the creation of a central jet within the broader outflow cavity. We show that currents flow along this jet and we observe its collimation to be enhanced by the additional hoop stresses associated with the generated toroidal field. Although at later times the jet column is observed to go unstable, the jet retains its collimation. We also present simulations of the magnetic jet evolution using our two-dimensional resistive magneto-hydrodynamic (MHD) laboratory code. We conclude with a discussion of the astrophysical relevance of the experiments and of the stability properties of the jet.

astro-ph↗