arXiv subjects

A. Conrad

Publications and source records attributed to A. Conrad.

11 recordsLinked to original sources

arXiv2025

Revealing Io's Surface using JWST-NIRISS Aperture Masking Interferometry and Neural Network Deconvolution

Io is one of Jupiter's largest moons and the most volcanically active body in the Solar System. Its very active surface has hot spots produced by volcanic eruptions popping up at seemingly random locations and times. Characterizing the complex surface of Io requires the highest angular resolution available. This work presents the analysis of Aperture Masking Interferometric observations (at 4.3 um) of Io taken with the Near-Infrared Imager and Slitless Spectrograph instrument on the James Webb Space Telescope. These are the first space-based infrared interferometric observations of a Solar System body ever taken. For complex extended objects like Io, the traditional visibility extraction algorithms from interferograms suffer from limitations. Here, new deconvolution methods based on Neural Networks allowed us to obtain reliable images from which a detailed analysis of the volcanically active surface of this moon was performed. Our study characterizes the loci and brightness of several unresolved volcanoes on the surface of Io, as well as the extended emission observed. We identified the brightest eruption (I_4.3um = 33 +/- 4.3 GW/um), referred to as V1, within an area to the North-East of Seth Patera (129.4 +/- 0.8 deg. W. Longitude, 1.5 +/- 0.7 deg. S. Latitude). Its projected speed (V_T = 86 +/- 34 m/s) is consistent with the rotational speed of Io. Additionally, six fainter volcanoes were identified and characterized. Complementary ground-based images, taken with the Keck II telescope, allowed us to benchmark the deconvolved Aperture Masking Interferometric images, showing consistency. Finally, we highlight the importance of characterizing Io's surface with long-term monitoring at high-angular resolution.

astro-ph.EP↗

arXiv2025

A dynamical dichotomy in large binary asteroids

No less than 15% of large (diameter greater than 140 km) asteroids have satellites. The commonly accepted mechanism for their formation is post-impact reaccumulation. However, the detailed physical and dynamical properties of these systems are not well understood, and many of them have not been studied in detail. We aim to study the population of large binary asteroid systems. To do so, we compare the gravitational fields predicted from the shape of the primary body with the non-Keplerian gravitational components identified in orbital models of the satellites of each system. We also aim to contextualize these systems in the greater population of large binary systems, providing clues to asteroid satellite formation. We reduce all historical high-angular-resolution adaptive-optics (AO) images from ground-based telescopes to conduct astrometric and photometric measurements of each system's components. We then determine orbital solutions for each system using the genoid algorithm. We model the shapes of the system primaries using lightcurve-inversion techniques scaled with stellar occultations and AO images, and we develop internal structure models using SHTOOLS. Finally, we compare the distribution of the physical and orbital properties of the known binary asteroid systems. We find that differences between studies binary systems reflect an overall dichotomy within the population of large binary systems, with a strong correlation between primary elongation and satellite eccentricity observed in one group. We determine that there may be two distinct formation pathways influencing the end-state dichotomy in these binary systems, and that (762) Pulcova and (283) Emma belong to the two separate groups.

astro-ph.EP↗

arXiv2025

Orbits of very distant asteroid satellites

The very wide binary asteroid (VWBA) population is a small subset of the population of known binary and multiple asteroids made of systems with very widely orbiting satellites and long orbital periods, on the order of tens to hundreds of days. The origin of these systems is debatable, and most members of this population are poorly characterized. We have compiled all available high-angular resolution imaging archival data of VWBA systems from large ground- and space-based telescopes. We measure the astrometric positions of the satellite relative to the primary and analyze the dynamics of the satellites using the Genoid genetic algorithm. Additionally, we use a NEATM thermal model to estimate the diameters of two systems, and we model the orbit of Litva's inner satellite using photometric lightcurve observations. We determine the effective diameters of binary systems Christophedumas and Alconrad to be 4.7 + 0.4km and 5.2 + 0.3km respectively. We determine new orbital solutions for five systems, Huenna, Litva, (3548) Eurybates, Pauling, and Alconrad. We find a significantly eccentric best-fit orbital solution for the outer satellite of Litva, a moderately eccentric solution for Alconrad, and a nearly circular solution for Pauling. We also confirm previously reported orbital solutions for (379) Huenna and Eurybates. It is unlikely that BYORP expansion could be solely responsible for the formation of VWBAs. It is possible that the satellites of these systems were formed through YORP spin-up and then later scattered onto very wide orbits. Additionally, we find that some members of the population are unlikely to have formed satellites through YORP spin-up, and a collisional formation history is favored. In particular, this applies to VWBAs within large dynamical families, or large VWBA systems such as Huenna and NASA's Lucy mission target Eurybates.

astro-ph.EP↗

arXiv2019

The homogeneous internal structure of CM-like asteroid (41) Daphne

Context. CM-like asteroids (Ch and Cgh classes) are a major population within the broader C-complex, encompassing about 10% of the mass of the main asteroid belt. Their internal structure has been predicted to be homogeneous, based on their compositional similarity as inferred from spectroscopy (Vernazza et al., 2016, AJ 152, 154) and numerical modeling of their early thermal evolution (Bland & Travis, 2017, Sci. Adv. 3, e1602514). Aims. Here we aim to test this hypothesis by deriving the density of the CM-like asteroid (41) Daphne from detailed modeling of its shape and the orbit of its small satellite. Methods. We observed Daphne and its satellite within our imaging survey with the Very Large Telescope extreme adaptive-optics SPHERE/ZIMPOL camera (ID 199.C-0074, PI P. Vernazza) and complemented this data set with earlier Keck/NIRC2 and VLT/NACO observations. We analyzed the dynamics of the satellite with our Genoid meta-heuristic algorithm. Combining our high-angular resolution images with optical lightcurves and stellar occultations, we determine the spin period, orientation, and 3-D shape, using our ADAM shape modeling algorithm. Results. The satellite orbits Daphne on an equatorial, quasi-circular, prograde orbit, like the satellites of many other large main-belt asteroids. The shape model of Daphne reveals several large flat areas that could be large impact craters. The mass determined from this orbit combined with the volume computed from the shape model implies a density for Daphne of 1.77+/-0.26 g/cm3 (3 {\sigma}). This density is consistent with a primordial CM-like homogeneous internal structure with some level of macroporosity (~17%). Conclusions. Based on our analysis of the density of Daphne and 75 other Ch/Cgh-type asteroids gathered from the literature, we conclude that the primordial internal structure of the CM parent bodies was homogeneous.

astro-ph.EP↗

arXiv2018

Alignment and preliminary outcomes of an ELT-size instrument to a very large telescope: LINC-NIRVANA at LBT

LINC-NIRVANA (LN) is a high resolution, near infrared imager that uses a multiple field-of-view, layer-oriented, multi-conjugate AO system, consisting of four multi-pyramid wavefront sensors (two for each arm of the Large Binocular Telescope, each conjugated to a different altitude). The system employs up to 40 star probes, looking at up to 20 natural guide stars simultaneously. Its final goal is to perform Fizeau interferometric imaging, thereby achieving ELT-like spatial resolution (22.8 m baseline resolution). For this reason, LN is also equipped with a fringe tracker, a beam combiner and a NIR science camera, for a total of more than 250 optical components and an overall size of approximately 6x4x4.5 meters. This paper describes the tradeoffs evaluated in order to achieve the alignment of the system to the telescope. We note that LN is comparable in size to planned ELT instrumentation. The impact of such alignment strategies will be compared and the selected procedure, where the LBT telescope is, in fact, aligned to the instrument, will be described. Furthermore, results coming from early night-time commissioning of the system will be presented.

astro-ph.IM↗

arXiv2018

Physical, spectral, and dynamical properties of asteroid (107) Camilla and its satellites

The population of large asteroids is thought to be primordial and they are the most direct witnesses of the early history of our Solar System. Those satellites allow study of the mass, and hence density and internal structure. We study here the properties of the triple asteroid (107) Camilla from lightcurves, stellar occultations, optical spectroscopy, and high-contrast and high-angular-resolution images and spectro-images. Using 80 positions over 15 years, we determine the orbit of its larger satellite to be circular, equatorial, and prograde, with RMS residuals of 7.8 mas. From 11 positions in three epochs only, in 2015 and 2016, we determine a preliminary orbit for the second satellite. We find the orbit to be somewhat eccentric and slightly inclined to the primary's equatorial plane, reminiscent of the inner satellites of other asteroid triple systems. Comparison of the near-infrared spectrum of the larger satellite reveals no significant difference with Camilla. Hence, these properties argue for a formation of the satellites by excavation from impact and re-accumulation of ejecta. We determine the spin and 3-D shape of Camilla. The model fits well each data set. We determine Camilla to be larger than reported from modeling of mid-infrared photometry, with a spherical-volume-equivalent diameter of 254 $\pm$ 36 km (3 $\sigma$ uncertainty), in agreement with recent results from shape modeling (Hanus2017+). Combining the mass of (1.12 $\pm$ 0.01) $\times$ 10$^{19}$ kg determined from the dynamics of the satellites and the volume from the 3-D shape model, we determine a density of 1,280 $\pm$ 130 SI. From this density, and considering Camilla's spectral similarities with (24) Themis and (65) Cybele (for which water ice coating on surface grains was reported), we infer a silicate-to-ice mass ratio of 1-6, with a 10-30% macroporosity.

astro-ph.EP↗

arXiv2013

The Resolved Asteroid Program - Size, shape, and pole of (52) Europa

With the adaptive optics (AO) system on the 10 m Keck-II telescope, we acquired a high quality set of 84 images at 14 epochs of asteroid (52) Europa on 2005 January 20. The epochs covered its rotation period and, by following its changing shape and orientation on the plane of sky, we obtained its triaxial ellipsoid dimensions and spin pole location. An independent determination from images at three epochs obtained in 2007 is in good agreement with these results. By combining these two data sets, along with a single epoch data set obtained in 2003, we have derived a global fit for (52) Europa of diameters (379x330x249) +/- (16x8x10) km, yielding a volume-equivalent spherical-diameter of 315 +/- 7 km, and a rotational pole within 7 deg of [RA; Dec] = [257,+12] in an Equatorial J2000 reference frame (ECJ2000: 255,+35). Using the average of all mass determinations available forEuropa, we derive a density of 1.5 +/- 0.4, typical of C-type asteroids. Comparing our images with the shape model of Michalowski et al. (A&A 416, 2004), derived from optical lightcurves, illustrates excellent agreement, although several edge features visible in the images are not rendered by the model. We therefore derived a complete 3-D description of Europa's shape using the KOALA algorithm by combining our imaging epochs with 4 stellar occultations and 49 lightcurves. We use this 3-D shape model to assess these departures from ellipsoidal shape. Flat facets (possible giant craters) appear to be less distinct on (52) Europa than on other C-types that have been imaged in detail. We show that fewer giant craters, or smaller craters, is consistent with its expected impact history. Overall, asteroid (52) Europa is still well modeled as a smooth triaxial ellipsoid with dimensions constrained by observations obtained over several apparitions.

astro-ph.EP↗

arXiv2011

Shape modeling technique KOALA validated by ESA Rosetta at (21) Lutetia

We present a comparison of our results from ground-based observations of asteroid (21) Lutetia with imaging data acquired during the flyby of the asteroid by the ESA Rosetta mission. This flyby provided a unique opportunity to evaluate and calibrate our method of determination of size, 3-D shape, and spin of an asteroid from ground-based observations. We present our 3-D shape-modeling technique KOALA which is based on multi-dataset inversion. We compare the results we obtained with KOALA, prior to the flyby, on asteroid (21) Lutetia with the high-spatial resolution images of the asteroid taken with the OSIRIS camera on-board the ESA Rosetta spacecraft, during its encounter with Lutetia. The spin axis determined with KOALA was found to be accurate to within two degrees, while the KOALA diameter determinations were within 2% of the Rosetta-derived values. The 3-D shape of the KOALA model is also confirmed by the spectacular visual agreement between both 3-D shape models (KOALA pre- and OSIRIS post-flyby). We found a typical deviation of only 2 km at local scales between the profiles from KOALA predictions and OSIRIS images, resulting in a volume uncertainty provided by KOALA better than 10%. Radiometric techniques for the interpretation of thermal infrared data also benefit greatly from the KOALA shape model: the absolute size and geometric albedo can be derived with high accuracy, and thermal properties, for example the thermal inertia, can be determined unambiguously. We consider this to be a validation of the KOALA method. Because space exploration will remain limited to only a few objects, KOALA stands as a powerful technique to study a much larger set of small bodies using Earth-based observations.

astro-ph.EP↗

arXiv2010

Physical properties of ESA Rosetta target asteroid (21) Lutetia: Shape and flyby geometry

Aims. We determine the physical properties (spin state and shape) of asteroid (21) Lutetia, target of the ESA Rosetta mission, to help in preparing for observations during the flyby on 2010 July 10 by predicting the orientation of Lutetia as seen from Rosetta. Methods. We use our novel KOALA inversion algorithm to determine the physical properties of asteroids from a combination of optical lightcurves, disk-resolved images, and stellar occultations, although the latter are not available for (21) Lutetia. Results. We find the spin axis of (21) Lutetia to lie within 5 degrees of ({\lambda} = 52 deg., {\beta} = -6 deg.) in Ecliptic J2000 reference frame (equatorial {\alpha} = 52 deg., {\delta} = +12 deg.), and determine an improved sidereal period of 8.168 270 \pm 0.000 001 h. This pole solution implies the southern hemisphere of Lutetia will be in "seasonal" shadow at the time of the flyby. The apparent cross-section of Lutetia is triangular as seen "pole-on" and more rectangular as seen "equator-on". The best-fit model suggests the presence of several concavities. The largest of these is close to the north pole and may be associated with large impacts.

astro-ph.EP↗

arXiv2010

The triaxial ellipsoid dimensions, rotational pole, and bulk density of ESA Rosetta target asteroid (21) Lutetia

We seek the best size estimates of the asteroid (21) Lutetia, the direction of its spin axis, and its bulk density, assuming its shape is well described by a smooth featureless triaxial ellipsoid, and to evaluate the deviations from this assumption. Methods. We derive these quantities from the outlines of the asteroid in 307 images of its resolved apparent disk obtained with adaptive optics (AO) at Keck II and VLT, and combine these with recent mass determinations to estimate a bulk density. Our best triaxial ellipsoid diameters for Lutetia, based on our AO images alone, are a x b x c = 132 x 101 x 93 km, with uncertainties of 4 x 3 x 13 km including estimated systematics, with a rotational pole within 5 deg. of ECJ2000 [long,lat] = [45, -7], or EQJ2000 [RA, DEC] = [44, +9]. The AO model fit itself has internal precisions of 1 x 1 x 8 km, but it is evident, both from this model derived from limited viewing aspects and the radius vector model given in a companion paper, that Lutetia has significant departures from an idealized ellipsoid. In particular, the long axis may be overestimated from the AO images alone by about 10 km. Therefore, we combine the best aspects of the radius vector and ellipsoid model into a hybrid ellipsoid model, as our final result, of 124 +/- 5 x 101 +/- 4 x 93 +/- 13 km that can be used to estimate volumes, sizes, and projected areas. The adopted pole position is within 5 deg. of [long, lat] = [52, -6] or[RA DEC] = [52, +12]. Using two separately determined masses and the volume of our hybrid model, we estimate a density of 3.5 +/- 1.1 or 4.3 +/- 0.8 g cm-3 . From the density evidence alone, we argue that this favors an enstatite-chondrite composition, although other compositions are formally allowed at the extremes (low-porosity CV/CO carbonaceous chondrite or high-porosity metallic). We discuss this in the context of other evidence.

astro-ph.EP↗

arXiv2005

Satellites of the largest Kuiper belt objects

We have searched the four brightest objects in the Kuiper belt for the presence of satellites using the newly commissioned Keck Observatory Laser Guide Star Adaptive Optics system. Satellites are seen around three of the four objects: Pluto (whose satellite Charon is well-known), 2003 EL61, and 2003 UB313. The object 2005 FY9, the brightest Kuiper belt object after Pluto, does not have a satellite detectable within 0.4 arcseconds with a brightness of more than 0.5% of the primary. The presence of satellites to 3 of the 4 brightest Kuiper belt objects is inconsistent with the fraction of satellites in the Kuiper belt at large at the 99.1% confidence level, suggesting a different formation mechanism for these largest KBO satellites. The satellites of 2003 EL61 and 2003 UB313, with fractional brightnesses of 5% and 2% of their primaries, respectively, are significantly fainter relative to their primaries than other known Kuiper belt object satellites, again pointing to possible differences in their origin.

astro-ph↗