arXiv subjects

A. Dal Corso

Publications and source records attributed to A. Dal Corso.

18 recordsLinked to original sources

arXiv2017

Advanced capabilities for materials modelling with Quantum ESPRESSO

Quantum ESPRESSO is an integrated suite of open-source computer codes for quantum simulations of materials using state-of-the art electronic-structure techniques, based on density-functional theory, density-functional perturbation theory, and many-body perturbation theory, within the plane-wave pseudo-potential and projector-augmented-wave approaches. Quantum ESPRESSO owes its popularity to the wide variety of properties and processes it allows to simulate, to its performance on an increasingly broad array of hardware architectures, and to a community of researchers that rely on its capabilities as a core open-source development platform to implement theirs ideas. In this paper we describe recent extensions and improvements, covering new methodologies and property calculators, improved parallelization, code modularization, and extended interoperability both within the distribution and with external software.

cond-mat.mtrl-sci↗

arXiv2014

Projector augmented-wave and all-electron calculations across the periodic table: a comparison of structural and energetic properties

We construct a reference database of materials properties calculated using density-functional theory in the local or generalized-gradient approximation, and an all-electron or a projector augmented-wave (PAW) formulation, for verification and validation of first-principles simulations. All-electron calculations use the full-potential linearised augmented-plane wave method, as implemented in the \texttt{Elk} open-source code, while PAW calculations use the datasets developed by some of us in the open-source \texttt{PSlibrary} repository and the \texttt{Quantum ESPRESSO} distribution. We first calculate lattice parameters, bulk moduli, and energy differences for alkaline metals, alkaline earths, and $3d$ and $4d$ transition metals in three ideal, reference phases (simple cubic, fcc, and bcc), representing a standardized crystalline monoatomic solid-state test. Then, as suggested by K. Lejaeghere {\it et al.}, [Critical Reviews in Solid State and Material Sciences 39, p 1 (2014)], we compare the equations of state for all elements, except lanthanides and actinides, in their experimental phase (or occasionally a simpler, closely related one). PAW and all-electron energy differences and structural parameters agree in most cases within a few meV/atom and a fraction of a percent, respectively. This level of agreement, comparable with the previous study, includes also other PAW and all-electron data from the electronic-structure codes \texttt{VASP} and \texttt{WIEN2K}, and underscores the overall reliability of current, state-of-the-art electronic-structure calculations. At the same time, discrepancies that arise even within the same formulation for simple, fundamental structural properties point to the urgent need of establishing standards for verification and validation, reference data sets, and careful refinements of the computational approaches used.

cond-mat.mtrl-sci↗

arXiv2009

Quantum ESPRESSO: a modular and open-source software project for quantum simulations of materials

Quantum ESPRESSO is an integrated suite of computer codes for electronic-structure calculations and materials modeling, based on density-functional theory, plane waves, and pseudopotentials (norm-conserving, ultrasoft, and projector-augmented wave). Quantum ESPRESSO stands for "opEn Source Package for Research in Electronic Structure, Simulation, and Optimization". It is freely available to researchers around the world under the terms of the GNU General Public License. Quantum ESPRESSO builds upon newly-restructured electronic-structure codes that have been developed and tested by some of the original authors of novel electronic-structure algorithms and applied in the last twenty years by some of the leading materials modeling groups worldwide. Innovation and efficiency are still its main focus, with special attention paid to massively-parallel architectures, and a great effort being devoted to user friendliness. Quantum ESPRESSO is evolving towards a distribution of independent and inter-operable codes in the spirit of an open-source project, where researchers active in the field of electronic-structure calculations are encouraged to participate in the project by contributing their own codes or by implementing their own ideas into existing codes.

cond-mat.mtrl-sci↗

arXiv2008

Interaction of a CO molecule with a Pt monatomic wire: electronic structure and ballistic conductance

We carry out a first-principles density functional study of the interaction between a monatomic Pt wire and a CO molecule, comparing the energy of different adsorption configurations (bridge, on top, substitutional, and tilted bridge) and discussing the effects of spin-orbit (SO) coupling on the electronic structure and on the ballistic conductance of two of these systems (bridge and substitutional). We find that, when the wire is unstrained, the bridge configuration is energetically favored, while the substitutional geometry becomes possible only after the breaking of the Pt-Pt bond next to CO. The interaction can be described by a donation/back-donation process similar to that occurring when CO adsorbs on transition-metal surfaces, a picture which remains valid also in presence of SO coupling. The ballistic conductance of the (tipless) nanowire is not much reduced by the adsorption of the molecule on the bridge and on-top sites, but shows a significant drop in the substitutional case. The differences in the electronic structure due to the SO coupling influence the transmission only at energies far away from the Fermi level so that fully- and scalar-relativistic conductances do not differ significantly.

cond-mat.mtrl-sci↗

arXiv2008

Interaction of a CO molecule with a Pt monoatomic chain: the top geometry

Recent experiments showed that the conductance of Pt nanocontacts and nanowires is measurably reduced by adsorption of CO. We present DFT calculations of the electronic structure and ballistic conductance of a Pt monoatomic chain and a CO molecule adsorbed in an on-top position. We find that the main electronic molecule-chain interaction occurs via the $5σ$ and $2π^{\star}$ orbitals of the molecule, involved in a donation/back-donation process similar to that of CO on transition-metal surfaces. The ideal ballistic conductance of the monoatomic chain undergoes a moderate reduction by about 1.0 G_0 (from 4 G_0 to 3.1 G_0) upon adsorption of CO. By repeating all calculations with and without spin-orbit coupling, no substantial spin-orbit induced change emerges either in the chain-molecule interaction mechanism or in the conductance.

cond-mat.mtrl-sci↗

arXiv2006

Ballistic Conductance and Magnetism in Short Tip-Suspended Ni Nanowires

Electronic and transport properties of a short Ni nanowire suspended between two semi-infinite ferromagnetic Ni leads are explored in the framework of density-functional theory. The spin-dependent ballistic conductance of the nanowire is calculated using a scattering-based approach and the Landauer-Buttiker formula. The total calculated conductance in units of $G_0 = 2e^2/h$ is around 1.6, in fairly good agreement with the broad peak observed around 1.5 for the last conductance step in break junctions. Separating contributions from different spins, we find nearly 0.5 $G_0$ from the majority spin $s$-like channel, whereas the remaining minority spin conductance of 1.1 $G_0$ contains significant contributions from several $d$ states, but much less than 0.5 $G_0$ from $s$ states. The influence of the structural relaxation on the magnetic properties and the ballistic conductance of the nanowire is also studied.

cond-mat.mtrl-sci↗

arXiv2004

Ballistic conductance of magnetic Co and Ni nanowires with ultrasoft pseudo-potentials

The scattering-based approach for calculating the ballistic conductance of open quantum systems is generalized to deal with magnetic transition metals as described by ultrasoft pseudo-potentials. As an application we present quantum-mechanical conductance calculations for monatomic Co and Ni nanowires with a magnetization reversal. We find that in both Co and Ni nanowires, at the Fermi energy, the conductance of $d$ electrons is blocked by a magnetization reversal, while the $s$ states (one per spin) are perfectly transmitted. $d$ electrons have a non-vanishing transmission in a small energy window below the Fermi level. Here, transmission is larger in Ni than in Co.

cond-mat.mtrl-sci↗

arXiv2004

Structure and dynamics of oxygen adsorbed on Ag(100) vicinal surfaces

The structure and dynamics of atomic oxygen adsorbed on Ag(410) and Ag(210) surfaces have been investigated using density functional theory. Our results show that the adsorption configuration in which O adatoms decorate the upper side of the (110) steps forming O--Ag--O rows is particularly stable for both surfaces. On Ag(210), this arrangement is more stable than other configurations at all the investigated coverages. On Ag(410), adsorption on the terrace and at the step edge are almost degenerate, the former being slightly preferred at low coverage while the latter is stabilized by increasing the coverage. These findings are substantiated by a comparison between the vibrational modes, calculated within density-functional perturbation theory, and the HREEL spectrum which has been recently measured in these systems.

cond-mat.mtrl-sci↗

arXiv2003

On-surface and Subsurface Adsorption of Oxygen on Stepped Ag(210) and Ag(410) Surfaces

The adsorption of atomic oxygen and its inclusion into subsurface sites on Ag(210) and Ag(410) surfaces have been investigated using density functional theory. We find that--in the absence of adatoms on the first metal layer--subsurface adsorption results in strong lattice distortion which makes it energetically unfavoured. However subsurface sites are significantly stabilised when a sufficient amount of O adatoms is present on the surface. At high enough O coverage on the Ag(210) surface the mixed on-surface + subsurface O adsorption is energetically favoured with respect to the on-surface only adsorption. Instead, on the Ag(410) surface, at the coverage we have considered (3/8 ML), the existence of stable terrace sites makes the subsurface O incorporation less favourable. These findings are compatible with the results of recent HREEL experiments which have actually motivated this work.

cond-mat↗

arXiv2003

Ballistic conductance of Ni nanowire with a magnetization reversal

The approach proposed by Choi and Ihm for calculating the ballistic conductance of open quantum systems is generalized to deal with magnetic transition metals. The method has been implemented with ultrasoft pseudopotentials and plane wave basis set in a DFT-LSDA ab-initio scheme. We present the quantum-mechanical conductance calculations for monatomic Ni nanowire with a single spin reversal. We find that a spin reversal blocks the conductance of $d$ electrons at the Fermi energy of the Ni nanowire. On the other hand, two $s$ electrons (one per each spin) are perfectly transmitted in the whole energy window giving $2G_0$ for the total conductance. The relevance of these results in connection with recent experimental data is discussed.

cond-mat.mtrl-sci↗

arXiv2003

First-principles study of lattice instabilities in the ferromagnetic martensite Ni$_2$MnGa

The phonon dispersion relations and elastic constants for ferromagnetic Ni$_2$MnGa in the cubic and tetragonally distorted Heusler structures are computed using density-functional and density-functional perturbation theory within the spin-polarized generalized-gradient approximation. For $0.9<c/a<1.06$, the TA$_2$ tranverse acoustic branch along $[110]$ and symmetry-related directions displays a dynamical instability at a wavevector that depends on $c/a$. Through examination of the Fermi-surface nesting and electron-phonon coupling, this is identified as a Kohn anomaly. In the parent cubic phase the computed tetragonal shear elastic constant, C$^\prime$=(C$_{11}-$C$_{12}$)/2, is close to zero, indicating a marginal elastic instability towards a uniform tetragonal distortion. We conclude that the cubic Heusler structure is unstable against a family of energy-lowering distortions produced by the coupling between a uniform tetragonal distortion and the corresponding $[110]$ modulation. The computed relation between the $c/a$ ratio and the modulation wavevector is in excellent agreement with structural data on the premartensitic ($c/a$ = 1) and martensitic ($c/a$ = 0.94) phases of Ni$_2$MnGa.

cond-mat.mtrl-sci↗

arXiv2003

Complex band structure with ultrasoft pseudopotentials: fcc Ni and Ni nanowire

We generalize to magnetic transition metals the approach proposed by Choi and Ihm for calculating the complex band structure of periodic systems, a key ingredient for future calculations of conductivity of an open quantum system within the Landauer-Buttiker theory. The method is implemented with ultrasoft pseudopotentials and plane wave basis set in a DFT-LSDA ab-initio scheme. As a first example, we present the complex band structure of bulk fcc Ni (which constitutes the tips of a Ni nanocontact) and monatomic Ni wire (the junction between two tips). Based on our results, we anticipate some features of the spin-dependent conductance in a Ni nanocontact.

cond-mat.mtrl-sci↗

arXiv2002

Phonons Softening in Tip-Stretched Monatomic Nanowires

It has been shown in recent experiments that electronic transport through a gold monatomic nanowire is dissipative above a threshold voltage due to excitation of phonons via the electron-phonon interaction. We address that data by computing, via density functional theory, the zone boundary longitudinal phonon frequency of a perfect monatomic nanowire during its mechanical elongation. The theoretical frequency that we find for an ideally strained nanowire is not compatible with experiment if a uniformly distributed stretch is assumed. With the help of a semi-empirical Au-Au potential, we model the realistic nanowire stretching as exerted by two tips. In this model we see that strain tends to concentrate in the junctions, so that the mean strain of the nanowire is roughly one half of the ideal value. With this reduced strain, the calculated phonon softening is in much better agreement with experiment.

cond-mat.mtrl-sci↗

arXiv2001

Selective d-state Conduction Blocking in Nickel Nanocontacts

The lowest conductance step for a Ni nanocontact is anomalously small in comparison with the large expected number of conducting channels. We present electronic structure calculations for an extremely idealized Ni nanobridge consisting of just a monatomic nanowire. Our calculations show that no less than eight single spin bands cross the Fermi level in a nonmagnetic Ni monatomic wire, dropping marginally to seven in the more stable, fully ferromagnetic state. However, when we build in the wire a magnetization reversal, or domain wall, by forcing the net magnetization to be zero, we suddenly find that d electrons selectively cease to propagate across the wall. s electron propagation remains, and can account for the small observed conductance steps.

cond-mat.mtrl-sci↗

arXiv2000

Phonons and related properties of extended systems from density-functional perturbation theory

This article reviews the current status of lattice-dynamical calculations in crystals, using density-functional perturbation theory, with emphasis on the plane-wave pseudo-potential method. Several specialized topics are treated, including the implementation for metals, the calculation of the response to macroscopic electric fields and their relevance to long wave-length vibrations in polar materials, the response to strain deformations, and higher-order responses. The success of this methodology is demonstrated with a number of applications existing in the literature.

cond-mat.mtrl-sci↗

arXiv2000

Electronic Properties of Ultra-Thin Aluminum Nanowires

We have carried out first principles electronic structure and total energy calculations for a series of ultrathin aluminum nanowires, based on structures obtained by relaxing the model wires of Gulseren et al. The number of conducting channels is followed as the wires radius is increased. The results suggest that pentagonal wires should be detectable, as the only ones who can yield a channel number between 8 and 10.

cond-mat↗

arXiv1999

Atomic structure and vibrational properties of icosahedral B$_4$C boron carbide

The atomic structure of icosahedral B$_4$C boron carbide is determined by comparing existing infra-red absorption and Raman diffusion measurements with the predictions of accurate {\it ab initio} lattice-dynamical calculations performed for different structural models. This allows us to unambiguously determine the location of the carbon atom within the boron icosahedron, a task presently beyond X-ray and neutron diffraction ability. By examining the inter- and intra-icosahedral contributions to the stiffness we show that, contrary to recent conjectures, intra-icosahedral bonds are harder.

cond-mat.mtrl-sci↗

arXiv1998

The Puzzling Stability of Monatomic Gold Wires

We have examined theoretically the spontaneous thinning process of tip-suspended nanowires, and subsequently studied the structure and stability of the monatomic gold wires recently observed by Transmission Electron Microscopy (TEM). The methods used include thermodynamics, classical many-body force simulations, Local Density (LDA) and Generalized Gradient (GGA) electronic structure calculations as well as ab-initio simulations including the two tips. The wire thinning is well explained in terms of a thermodynamic tip suction driving migration of surface atoms from the wire to the tips. For the same reason the monatomic wire becomes progressively stretched. Surprisingly, however, all calculations so far indicate that the stretched monatomic gold wire should be unstable against breaking, contrary to the apparent experimental stability. The possible reasons for the observed stability are discussed.

cond-mat.mtrl-sci↗