arXiv subjects

A. De Roeck

Publications and source records attributed to A. De Roeck.

At least 19 recordsLinked to original sources

arXiv2026

Measurement of the muon neutrino charged-current cross section with SND@LHC

We report a measurement of the muon neutrino charged-current (CC) interaction cross section on tungsten using the electronic detectors of the SND@LHC experiment at the CERN Large Hadron Collider. The analysis uses proton--proton collision data at a centre-of-mass energy of $\sqrt{s} = 13.6$ TeV, corresponding to an integrated luminosity of $68.6 ~\text{fb}^{-1}$ collected during LHC Run 3 in 2022 and 2023. A total of 31 $ν_μ$ CC candidates are selected against an expected background of $5.0 \pm 1.1$ events, consistent with a signal expectation of $24^{+10}_{-9}$ events. The signal strength is measured to be $\hatμ = 1.09^{+0.72}_{-0.37}$, and the combined muon neutrino and anti-neutrino CC cross section on tungsten is determined to be $σ(ν_μ+ \barν_μ) = (37^{+24}_{-12})\times 10^{-35}~\text{cm}^2$ at a median energy of $228$ GeV. In addition, a calorimetric measurement of the hadronic energies of the neutrino candidate events is performed, making use of calibration data from dedicated test-beam campaigns.

hep-ex↗

arXiv2026

A new diffuse reflector filament for additive manufacturing of 3D printing finely-segmented plastic scintillator

This study presents the development and the characterization of novel white reflective filaments suitable for additive manufacturing of finely segmented plastic scintillators. The filament is based on polycarbonate (PC) and polymethyl methacrylate (PMMA) polymers loaded with titanium dioxide (TiO$_2$) and polytetrafluoroethylene (PTFE) to enhance reflectivity. A range of filament compositions and thicknesses was evaluated through optical reflection and transmittance measurements of reflective layers made with the Fused Deposition Modeling (FDM) technique. A 3D-segmented plastic scintillator prototype was made with fused injection modeling (FIM) and tested with cosmic rays to assess the light yield and the optical crosstalk. The results demonstrate the feasibility of producing compact and modular 3D-printed scintillator detectors with a performance analogous to standard plastic scintillator detectors. Owing to the improved optical properties of the new reflector filament, a lower light crosstalk and a higher light yield, compared to past works, is obtained.

physics.ins-det↗

arXiv2025

A new diffuse reflector filament for additive manufacturing of 3D printing finely-segmented plastic scintillator

This study presents the development and characterization of a novel white reflective filament suitable for additive manufacturing of finely segmented plastic scintillators using 3D printing. The filament is based on polycarbonate (PC) and polymethyl methacrylate (PMMA) polymers loaded with titanium dioxide (TiO$_2$) and polytetrafluoroethylene (PTFE) to enhance reflectivity. A range of filament compositions and thicknesses was evaluated through optical reflection and transmittance measurements. Reflective layers were made by using the Fused Deposition Modeling (FDM) technique. A 3D-segmented plastic scintillator prototype was made with fused injection modeling (FIM) and tested with cosmic rays to assess the light yield and the optical crosstalk. The results demonstrate the feasibility of producing compact and modular 3D-printed scintillator detectors with a performance analogous to standard plastic scintillator detectors, with lower light crosstalk, thus higher light yield, compared to past works, owing to the improved optical properties of the reflector material.

physics.ins-det↗

arXiv2025

Search for millicharged particles in proton-proton collisions at $\sqrt{s} = 13.6$ TeV

We report on a search for elementary particles with charges much smaller than the electron charge using a data sample of proton-proton collisions provided by the CERN Large Hadron Collider in 2023--24, corresponding to an integrated luminosity of 124.7~fb$^{-1}$ at a center-of-mass energy of 13.6~TeV. The analysis presented uses the completed Run 3 milliQan bar detector to set the most stringent constraints to date for particles with charges $\leq0.24~\rm{e}$ and masses $\geq0.45~\rm{GeV}$.

hep-ex↗

arXiv2025

First measurement of neutron capture multiplicity in neutrino-oxygen neutral-current quasi-elastic-like interactions using an accelerator neutrino beam

We report the first measurement of neutron capture multiplicity in neutrino-oxygen neutral-current quasi-elastic-like interactions at the gadolinium-loaded Super-Kamiokande detector using the T2K neutrino beam, which has a peak energy of about 0.6 GeV. A total of 30 neutral-current quasi-elastic-like event candidates were selected from T2K data corresponding to an exposure of $1.76\times10^{20}$ protons on target. The $γ$ ray signals resulting from neutron captures were identified using a neural network. The flux-averaged mean neutron capture multiplicity was measured to be $1.37\pm0.33\text{ (stat.)}$$^{+0.17}_{-0.27}\text{ (syst.)}$, which is compatible within $2.3\,σ$ than predictions obtained using our nominal simulation. We discuss potential sources of systematic uncertainty in the prediction and demonstrate that a significant portion of this discrepancy arises from the modeling of hadron-nucleus interactions in the detector medium.

hep-ex↗

arXiv2024

Prospects for Heavy Neutral Lepton Searches at Short and Medium Baseline Reactor Experiments

Heavy neutrinos with masses in the MeV range can in principle simultaneously explain the light neutrino masses and the origin of baryonic matter in the universe. The strongest constraints on their properties come from their potential impact on the formation of light elements in the early universe. Since these constraints rely on assumptions about the cosmic history, independent checks in the laboratory are highly desirable. In this paper, we discuss the opportunity to search for heavy neutrinos within the MeV mass range in short and medium baseline reactor neutrino experiments, using the SoLid, JUNO and TAO experiments as examples. These experiments can give the currently strongest upper bound on the mixing between the light electron neutrinos and the heavy neutrino in the 2-9 MeV mass range.

hep-ph↗

arXiv2024

First joint oscillation analysis of Super-Kamiokande atmospheric and T2K accelerator neutrino data

The Super-Kamiokande and T2K collaborations present a joint measurement of neutrino oscillation parameters from their atmospheric and beam neutrino data. It uses a common interaction model for events overlapping in neutrino energy and correlated detector systematic uncertainties between the two datasets, which are found to be compatible. Using 3244.4 days of atmospheric data and a beam exposure of $19.7(16.3) \times 10^{20}$ protons on target in (anti)neutrino mode, the analysis finds a 1.9$σ$ exclusion of CP-conservation (defined as $J_{CP}=0$) and a preference for the normal mass ordering.

hep-ex↗

arXiv2024

MoEDAL search in the CMS beam pipe for magnetic monopoles produced via the Schwinger effect

We report on a search for magnetic monopoles (MMs) produced in ultraperipheral Pb--Pb collisions during Run-1 of the LHC. The beam pipe surrounding the interaction region of the CMS experiment was exposed to 184.07 \textmu b$^{-1}$ of Pb--Pb collisions at 2.76 TeV center-of-mass energy per collision in December 2011, before being removed in 2013. It was scanned by the MoEDAL experiment using a SQUID magnetometer to search for trapped MMs. No MM signal was observed. The two distinctive features of this search are the use of a trapping volume very close to the collision point and ultra-high magnetic fields generated during the heavy-ion run that could produce MMs via the Schwinger effect. These two advantages allowed setting the first reliable, world-leading mass limits on MMs with high magnetic charge. In particular, the established limits are the strongest available in the range between 2 and 45 Dirac units, excluding MMs with masses of up to 80 GeV at 95\% confidence level.

nucl-ex↗

arXiv2023

Physics Opportunities at a Beam Dump Facility at PIP-II at Fermilab and Beyond

The Fermilab Proton-Improvement-Plan-II (PIP-II) is being implemented in order to support the precision neutrino oscillation measurements at the Deep Underground Neutrino Experiment, the U.S. flagship neutrino experiment. The PIP-II LINAC is presently under construction and is expected to provide 800~MeV protons with 2~mA current. This white paper summarizes the outcome of the first workshop on May 10 through 13, 2023, to exploit this capability for new physics opportunities in the kinematic regime that are unavailable to other facilities, in particular a potential beam dump facility implemented at the end of the LINAC. Various new physics opportunities have been discussed in a wide range of kinematic regime, from eV scale to keV and MeV. We also emphasize that the timely establishment of the beam dump facility at Fermilab is essential to exploit these new physics opportunities.

hep-ex↗

arXiv2023

First measurement of muon neutrino charged-current interactions on hydrocarbon without pions in the final state using multiple detectors with correlated energy spectra at T2K

This paper reports the first measurement of muon neutrino charged-current interactions without pions in the final state using multiple detectors with correlated energy spectra at T2K. The data was collected on hydrocarbon targets using the off-axis T2K near detector (ND280) and the on-axis T2K near detector (INGRID) with neutrino energy spectra peaked at 0.6 GeV and 1.1 GeV respectively. The correlated neutrino flux presents an opportunity to reduce the impact of the flux uncertainty and to study the energy dependence of neutrino interactions. The extracted double-differential cross sections are compared to several Monte Carlo neutrino-nucleus interaction event generators showing the agreement between both detectors individually and with the correlated result.

hep-ex↗

arXiv2023

Updated T2K measurements of muon neutrino and antineutrino disappearance using 3.6 $\times$ 10$^{21}$ protons on target

Muon neutrino and antineutrino disappearance probabilities are identical in the standard three-flavor neutrino oscillation framework, but CPT violation and non-standard interactions can violate this symmetry. In this work we report the measurements of $\sin^{2} θ_{23}$ and $Δm_{32}^2$ independently for neutrinos and antineutrinos. The aforementioned symmetry violation would manifest as an inconsistency in the neutrino and antineutrino oscillation parameters. The analysis discussed here uses a total of 1.97$\times$10$^{21}$ and 1.63$\times$10$^{21}$ protons on target taken with a neutrino and antineutrino beam respectively, and benefits from improved flux and cross-section models, new near detector samples and more than double the data reducing the overall uncertainty of the result. No significant deviation is observed, consistent with the standard neutrino oscillation picture.

hep-ex↗

arXiv2023

Measurements of the $ν_μ$ and $\barν_μ$-induced Coherent Charged Pion Production Cross Sections on $^{12}C$ by the T2K experiment

We report an updated measurement of the $ν_μ$-induced, and the first measurement of the $\barν_μ$-induced coherent charged pion production cross section on $^{12}C$ nuclei in the T2K experiment. This is measured in a restricted region of the final-state phase space for which $p_{μ,π} > 0.2$ GeV, $\cos(θ_μ) > 0.8$ and $\cos(θ_π) > 0.6$, and at a mean (anti)neutrino energy of 0.85 GeV using the T2K near detector. The measured $ν_μ$ CC coherent pion production flux-averaged cross section on $^{12}C$ is $(2.98 \pm 0.37 (stat.) \pm 0.31 (syst.) \substack{ +0.49 \\ -0.00 } \mathrm{ (Q^2\,model)}) \times 10^{-40}~\mathrm{cm}^{2}$. The new measurement of the $\barν_μ$-induced cross section on $^{12}{C}$ is $(3.05 \pm 0.71 (stat.) \pm 0.39 (syst.) \substack{ +0.74 \\ -0.00 } \mathrm{(Q^2\,model)}) \times 10^{-40}~\mathrm{cm}^{2}$. The results are compatible with both the NEUT 5.4.0 Berger-Sehgal (2009) and GENIE 2.8.0 Rein-Sehgal (2007) model predictions.

hep-ex↗

arXiv2023

Measurements of neutrino oscillation parameters from the T2K experiment using $3.6\times10^{21}$ protons on target

The T2K experiment presents new measurements of neutrino oscillation parameters using $19.7(16.3)\times10^{20}$ protons on target (POT) in (anti-)neutrino mode at the far detector (FD). Compared to the previous analysis, an additional $4.7\times10^{20}$ POT neutrino data was collected at the FD. Significant improvements were made to the analysis methodology, with the near-detector analysis introducing new selections and using more than double the data. Additionally, this is the first T2K oscillation analysis to use NA61/SHINE data on a replica of the T2K target to tune the neutrino flux model, and the neutrino interaction model was improved to include new nuclear effects and calculations. Frequentist and Bayesian analyses are presented, including results on $\sin^2θ_{13}$ and the impact of priors on the $δ_\mathrm{CP}$ measurement. Both analyses prefer the normal mass ordering and upper octant of $\sin^2θ_{23}$ with a nearly maximally CP-violating phase. Assuming the normal ordering and using the constraint on $\sin^2θ_{13}$ from reactors, $\sin^2θ_{23}=0.561^{+0.021}_{-0.032}$ using Feldman--Cousins corrected intervals, and $Δm^2_{32}=2.494_{-0.058}^{+0.041}\times10^{-3}~\mathrm{eV^2}$ using constant $Δχ^{2}$ intervals. The CP-violating phase is constrained to $δ_\mathrm{CP}=-1.97_{-0.70}^{+0.97}$ using Feldman--Cousins corrected intervals, and $δ_\mathrm{CP}=0,π$ is excluded at more than 90% confidence level. A Jarlskog invariant of zero is excluded at more than $2σ$ credible level using a flat prior in $δ_\mathrm{CP}$, and just below $2σ$ using a flat prior in $\sinδ_\mathrm{CP}$. When the external constraint on $\sin^2θ_{13}$ is removed, $\sin^2θ_{13}=28.0^{+2.8}_{-6.5}\times10^{-3}$, in agreement with measurements from reactor experiments. These results are consistent with previous T2K analyses.

hep-ex↗

arXiv2023

Total Neutron Cross-section Measurement on CH with a Novel 3D-projection Scintillator Detector

In order to extract neutrino oscillation parameters, precision long-baseline neutrino oscillation experiments rely on detailed models of neutrino interactions with nuclei. These models constitute an important source of systematic uncertainty, partially because detectors to date have been blind to final state neutrons. Three-dimensional projection scintillator trackers comprise components of the near detectors of the next generation long-baseline neutrino experiments. Due to the good timing resolution and fine granularity, this technology is capable of measuring neutron kinetic energy in neutrino interactions on an event-by-event basis and will provide valuable data for refining neutrino interaction models and ways to reconstruct neutrino energy. Two prototypes have been exposed to the neutron beamline at Los Alamos National Laboratory (LANL) in both 2019 and 2020, with neutron energies between 0 and 800 MeV. In order to demonstrate the capability of neutron detection, the total neutron-scintillator cross section is measured and compared to external measurements. The measured total neutron cross section in scintillator between 98 and 688 MeV is 0.36 $\pm$ 0.05 barn.

physics.ins-det↗

arXiv2023

Feebly Interacting Particles: FIPs 2022 workshop report

Particle physics today faces the challenge of explaining the mystery of dark matter, the origin of matter over anti-matter in the Universe, the origin of the neutrino masses, the apparent fine-tuning of the electro-weak scale, and many other aspects of fundamental physics. Perhaps the most striking frontier to emerge in the search for answers involves new physics at mass scales comparable to familiar matter, below the GeV-scale, or even radically below, down to sub-eV scales, and with very feeble interaction strength. New theoretical ideas to address dark matter and other fundamental questions predict such feebly interacting particles (FIPs) at these scales, and indeed, existing data provide numerous hints for such possibility. A vibrant experimental program to discover such physics is under way, guided by a systematic theoretical approach firmly grounded on the underlying principles of the Standard Model. This document represents the report of the FIPs 2022 workshop, held at CERN between the 17 and 21 October 2022 and aims to give an overview of these efforts, their motivations, and the decadal goals that animate the community involved in the search for FIPs.

hep-ph↗

arXiv2022

Additive manufacturing of inorganic scintillator-based particle detectors

Inorganic scintillators are widely used for scientific, industrial and medical applications. The development of 3D printing with inorganic scintillators would allow fast creation of detector prototypes for registration of ionizing radiation, such as alpha and beta, gamma particles in thin layers of active material and soft X-ray radiation. This article reports on the technical work and scientific achievements that aimed at developing a new inorganic scintillation filament to be used for the 3D printing of composite scintillator materials: study and definition of the scintillator composition; development of the methods for the inorganic scintillator filament production and further implementation in the available 3D printing technologies; study of impact of the different 3D printing modes on the material scintillation characteristics. Also, 3D printed scintillators can be used for creation of combined detectors for high-energy physics.

physics.ins-det↗

arXiv2022

Neutron detection and application with a novel 3D-projection scintillator tracker in the future long-baseline neutrino oscillation experiments

Neutrino oscillation experiments require a precise measurement of the neutrino energy. However, the kinematic detection of the final-state neutron in the neutrino interaction is missing in current neutrino oscillation experiments. The missing neutron kinematic detection results in a feed-down of the detected neutrino energy compared to the true neutrino energy. A novel 3D\textcolor{black}{-}projection scintillator tracker, which consists of roughly ten million active cubes covered with an optical reflector, is capable of measuring the neutron kinetic energy and direction on an event-by-event basis using the time-of-flight technique thanks to the fast timing, fine granularity, and high light yield. The $\barν_μ$ interactions tend to produce neutrons in the final state. By inferring the neutron kinetic energy, the $\barν_μ$ energy can be reconstructed better, allowing a tighter incoming neutrino flux constraint. This paper shows the detector's ability to reconstruct neutron kinetic energy and the $\barν_μ$ flux constraint achieved by selecting the charged-current interactions without mesons or protons in the final state.

hep-ex↗

arXiv2022

Additive manufacturing of fine-granularity optically-isolated plastic scintillator elements

Plastic scintillator detectors are used in high energy physics as well as for diagnostic imaging in medicine, beam monitoring on hadron therapy, muon tomography, dosimetry and many security applications. To combine particle tracking and calorimetry it is necessary to build detectors with three-dimensional granularity, i.e. small voxels of scintillator optically isolated from each other. Recently, the 3DET collaboration demonstrated the possibility to 3D print polystyrene-based scintillators with a light output performance close to that obtained with standard production methods. In this article, after providing a further characterization of the developed scintillators, we show the first matrix of plastic scintillator cubes optically separated by a white reflector material entirely 3D printed with fused deposition modeling. This is a major milestone towards the 3D printing of the first real particle detector. A discussion of the results as well as the next steps in the R&D is also provided.

physics.ins-det↗