arXiv subjects

A. Duarte-Cabral

Publications and source records attributed to A. Duarte-Cabral.

At least 19 recordsLinked to original sources

arXiv2025

PHANGS-JWST: the largest extragalactic molecular cloud catalog traced by polycyclic aromatic hydrocarbon emission

High-resolution JWST images of nearby spiral galaxies reveal polycyclic aromatic hydrocarbon (PAH) emission structures that trace molecular gas, including CO-dark regions. We identify ISM cloud structures in PHANGS-JWST 7.7 $\mu$m PAH maps for 66 galaxies, smoothed to 30 pc and at native resolution, extracting 108,466 and 146,040 clouds, respectively. Molecular properties were inferred using a linear conversion from PAH to CO. Given the tendency for clouds in galaxy centers to overlap in velocity space, we opted to flag these and omit them from the analysis in this work. The remaining clouds correspond to giant molecular clouds, such as those detected in CO(2-1) emission by ALMA, or lower surface density clouds that either fall below the ALMA detection limits of existing maps or genuinely have no molecular counterpart. Cross-matching with ALMA CO maps at 90 pc in 27 galaxies shows that 41 % of PAH clouds have CO associations. The converted molecular properties vary little across environments, but the most massive clouds are preferentially found in spiral arms. Fitting lognormal mass distributions down to $2\times10^{3} M_{\odot}$ shows that spiral arms host the highest-mass clouds, consistent with enhanced formation in arm gravitational potentials. Cloud molecular surface densities decline by a factor of $\sim 1.5-2$ toward $2 - 3 R_{e}$. However, the trend largely varies in individual galaxies, with flat, decreasing, and even no trend as a function of galactocentric radius. Factors like large-scale processes and morphologies might influence the observed trends. We publish two catalogs online, one at the common resolution of 30 pc and another at the native resolution. We expect them to have broad utility for future PAH clouds, molecular clouds, and star formation studies.

astro-ph.GA↗

arXiv2025

A multiscale evolutionary study of molecular gas in STARFORGE. I. Synthetic observations of SEDIGISM-like molecular clouds

Molecular clouds are active sites of star formation in galaxies, and their formation and evolution are largely affected by stellar feedback. This includes outflows and winds from newly formed stars, radiation from young clusters, and supernova explosions. High-resolution molecular line observations allow for the identification of individual star-forming regions and the study of their integrated properties. Moreover, simulations are now capable of accurately replicating the evolution of MCs including all key stellar feedback processes. We present 13CO(2-1) synthetic observations of the STARFORGE simulations produced using the radiative transfer code RADMC-3D, matching the observational setup of the SEDIGISM survey. From these, we identified the population of MCs using hierarchical clustering and analysed them to provide insights into the interpretation of observed MCs as they evolve. The flux distributions of the post-processed synthetic observations and the properties of the MCs, namely radius, mass, velocity dispersion, virial parameter and surface density, are consistent with those of SEDIGISM. Both samples of MCs occupy the same regions in the scaling relation plots; however, the average distributions of MCs at different evolutionary stages do not overlap on the plots. This highlights the reliability of our approach in modelling SEDIGISM and suggests that MCs at different evolutionary stages contribute to the scatter in observed scaling relations. We study the trends in MC properties over time to analyse their physical structure as they evolve. MCs appear as small, diffuse cloudlets in early stages, followed by their evolution to filamentary structures, before being shaped by stellar feedback into 3D bubbles and getting dispersed. These trends in the observable properties of MCs provide strong evidence that clouds exhibit distinct morphologies over the course of their evolution.

astro-ph.GA↗

arXiv2025

Cloud populations versus galactic environment in NGC4689, NGC628, NGC1566, and NGC4321

The study of molecular clouds in galaxies beyond the Local Group is limited by the need to efficiently sample diverse galactic environments across galactic discs, typically resulting in a loss of resolution. Using a high-resolution dust extinction technique, we image the dust (and gas) of 4 nearby galaxies (<18 Mpc; NGC 4689, NGC 628, NGC 1566, and NGC 4321) with resolutions between 5-9 pc. We present catalogues of spatially-resolved clouds for these galaxies, with which we investigate whether different galactic environments and morphologies have a significant impact on observed cloud properties. We find no systematic differences in cloud size, aspect ratio, or morphology with galactic environment or radius. We do find changes in cloud masses/surface densities between the centres and discs of galaxies, with clouds in centres typically displaying higher values of mass/surface density. Furthermore, we find distinct distributions of cloud surface densities across the bars of NGC 1566 and NGC 4321. Differences between the arm and inter-arm populations are more subtle, with some galaxies in the sample having much higher cloud masses/surface densities in their spiral arms, and other galaxies showing fairly similar arm/inter-arm distributions. These results suggest that, even within this small sample of galaxies, not all spiral arms and bars seem to behave and affect the interstellar medium equally. Therefore, performing a qualitative environment analysis, where clouds of different galaxies are all binned together under the same visual environmental classification, leads to the loss of information on interesting property variations which in turn demonstrate the impact of the underlying dynamics.

astro-ph.GA↗

arXiv2023

Large-scale Velocity-coherent Filaments in the SEDIGISM Survey: Association with Spiral Arms and Fraction of Dense Gas

Context. Filamentary structures in the interstellar medium are closely related to star formation. Dense gas mass fraction (DGMF) or clump formation efficiency in large-scale filaments possibly determine their hosting star formation activities. Aims. We aim to automatically identify large-scale filaments, characterize them, investigate their association with Galactic structures, and study their DGMFs. Methods. We use a modified minimum spanning tree (MST) algorithm to chain parsec-scale 13CO clumps previously extracted from the SEDIGISM (Structure, Excitation, and Dynamics of the Inner Galactic InterStellar Medium) survey. The MST connects nodes in a graph such that the sum of edge lengths is minimum. Modified MST also ensures velocity coherence between nodes, so the identified filaments are coherent in position-position-velocity (PPV) space. Results. We generate a catalog of 88 large-scale ($>10pc$) filaments in the inner Galactic plane (with $-60^\circ < l < 18^\circ and $|b| < 0.5^\circ$). These SEDIGISM filaments are larger and less dense than MST filaments previously identified from the BGPS and ATLASGAL surveys. We find that eight of the filaments run along spiral arms and can be regarded as "bones" of the Milky Way. We also find three bones associated with the Local Spur in PPV space. By compiling 168 large-scale filaments with available DGMF across the Galaxy, an order of magnitude more than previously investigated, we find that DGMFs do not correlate with Galactic location, but bones have higher DGMFs than other filaments.

astro-ph.GA↗

arXiv2022

Multi-scale dynamics in star-forming regions: the interplay between gravity and turbulence

In the multi-scale view of the star formation process the material flows from large molecular clouds down to clumps and cores. In this paradigm it is still unclear if it is gravity or turbulence that drives the observed supersonic non-thermal motions during the collapse, in particular in high-mass regions, and at which scales gravity becomes eventually dominant over the turbulence of the interstellar medium. To investigate this problem we have combined the dynamics of a sample of 70 micron-quiet clumps, selected to cover a wide range of masses and surface densities, with the dynamics of the parent filaments in which they are embedded. We observe a continuous interplay between turbulence and gravity, where the former creates structures at all scales and the latter takes the lead when a critical value of the surface density is reached, Sigma_th = 0.1 g cm^-2. In the densest filaments this transition can occur at the parsec, or even larger scales, leading to a global collapse of the whole region and most likely to the formation of the massive objects.

astro-ph.GA↗

arXiv2022

A new phase of massive star formation? A luminous outflow cavity centred on an infrared quiet core

We present APEX, infrared and radio continuum observations of the G345.88-1.10 hub filament system which is a newly discovered star-forming cloud that hosts an unusually bright bipolar infrared nebulosity at its centre. At a distance of 2.26$^{+0.30}_{-0.21}$ kpc, G345.88-1.10 exhibits a network of parsec-long converging filaments. At the junction of these filaments lie four infrared-quiet fragments. The densest fragment (with M=210 M$_{\odot}$, R$_{\rm{eff}}=0.14$ pc) sits at the centre of a wide (opening angle of $\sim$ 90$\pm$15$^{o}$) bipolar nebulosity. $^{12}$CO(2-1) observations show that these infrared-bright nebulosities are spatially associated with a powerful molecular outflow from the central fragment. Negligible radio continuum and no H30$α$ emission is detected towards the cavities, seemingly excluding that ionising radiation drives the evolution of the cavities. Furthermore, radiative transfer simulations are unable to reproduce the observed combination of a low-luminosity ($\lesssim$ 500 L$_{\odot}$) central source and a surrounding high-luminosity ($\sim 4000$ L$_{\odot}$) mid-infrared-bright bipolar cavity. This suggests that radiative heating from a central protostar cannot be responsible for the illumination of the outflow cavities. To our knowledge, this is the first reported object of this type. The rarity of objects like G345.88-1.10 is likely related to a very short phase in the massive star and/or cluster formation process that was so far unidentified. We discuss whether mechanical energy deposition by one episode or successive episodes of powerful mass accretion in a collapsing hub might explain the observations. While promising in some aspects, a fully coherent scenario that explains the presence of a luminous bipolar cavity centred on an infrared-dark fragment remains elusive at this point.

astro-ph.GA↗

arXiv2022

The SEDIGISM survey: Molecular cloud morphology. II. Integrated source properties

The Structure, Excitation, and Dynamics of the Inner Galactic InterStellar Medium (SEDIGISM) survey has produced high (spatial and spectral) resolution $^{13}$CO (2-1) maps of the Milky Way. It has allowed us to investigate the molecular interstellar medium in the inner Galaxy at an unprecedented level of detail and characterise it into molecular clouds. In a previous paper, we have classified the SEDIGISM clouds into four morphologies. However, how the properties of the clouds vary for these four morphologies is not well understood. Here, we use the morphological classification of SEDIGISM clouds to find connections between the cloud morphologies, their integrated properties, and their location on scaling relation diagrams. We observe that ring-like clouds show the most peculiar properties, having, on average, higher masses, sizes, aspect ratios and velocity dispersions compared to other morphologies. We speculate that this is related to the physical mechanisms that regulate their formation and evolution, for example, turbulence from stellar feedback can often results in the creation of bubble-like structures. We also see a trend of morphology with virial parameter whereby ring-like, elongated, clumpy and concentrated clouds have virial parameters in a decreasing order. Our findings provide a foundation for a better understanding of the molecular cloud behaviour based on their measurable properties.

astro-ph.GA↗

arXiv2022

The SEDIGISM survey: Molecular cloud morphology. I. Classification and star formation

We present one of the very first extensive classifications of a large sample of molecular clouds based on their morphology. This is achieved using a recently published catalogue of 10663 clouds obtained from the first data release of the SEDIGISM survey. The clouds are classified into four different morphologies by visual inspection and using an automated algorithm -- J plots. The visual inspection also serves as a test for the J plots algorithm, as this is the first time it has been used on molecular gas. Generally, it has been found that the structure of molecular clouds is highly filamentary and our observations indeed verify that most of our molecular clouds are elongated structures. Based on our visual classification of the 10663 SEDIGISM clouds, 15% are ring-like, 57% are elongated, 15% are concentrated and 10% are clumpy clouds. The remaining clouds do not belong to any of these morphology classes and are termed unclassified. We compare the SEDIGISM molecular clouds with structures identified through other surveys, i.e. ATLASGAL elongated structures and the bubbles from Milky Way Project (MWP). We find that many of the ATLASGAL and MWP structures are velocity coherent. ATLASGAL elongated structures overlap with ~ 21% of the SEDIGISM elongated structures (elongated and clumpy clouds) and MWP bubbles overlap with ~ 25% of the SEDIGISM ring-like clouds. We also analyse the star-formation associated with different cloud morphologies using two different techniques. The first technique examines star formation efficiency (SFE) and the dense gas fraction (DGF), based on SEDIGISM clouds and ATLASGAL clumps data. The second technique uses the high-mass star formation (HMSF) threshold for molecular clouds. The results indicate that clouds with ring-like and clumpy morphologies show a higher degree of star formation.

astro-ph.GA↗

arXiv2021

The SEDIGISM survey: a search for molecular outflows

Context. The formation processes of massive stars are still unclear but a picture is emerging involving accretion disks and molecular outflows in what appears to be a scaled-up version of low-mass star formation. A census of outflow activity towards massive star-forming clumps in various evolutionary stages has the potential to shed light on massive star formation (MSF). Aims. We conducted an outflow survey towards ATLASGAL clumps using SEDIGISM data and aimed to obtain a large sample of clumps exhibiting outflows in different evolutionary stages. Methods. We identify the high-velocity wings of the 13CO lines toward ATLASGAL clumps by (1) extracting the simultaneously observed 13CO and C18O spectra from SEDIGISM, and (2) subtracting Gaussian fits to the scaled C18O from the 13CO, line after considering opacity broadening. Results. We have detected high-velocity gas towards 1192 clumps out of a total sample of 2052, giving an overall detection rate of 58%. Outflow activity has been detected in the earliest quiescent clumps (i.e., 70$μ$m weak), to the most evolved HII region stages i.e., 8$μ$m bright with MSF tracers. The detection rate increases as a function of evolution (quiescent=51%, protostellar=47%, YSO=57%, UCHII regions=76%). Conclusion. Our sample is the largest outflow sample identified so far. The high-detection rate from this large sample is consistent with previous results and supports that outflows are a ubiquitous feature of MSF. The lower detection rate in early evolutionary stages may be due to that outflows in the early stages are weak and difficult to detect. We obtain a statistically significant sample of outflow clumps for every evolutionary stage, especially for outflow clumps in the 70$μ$m dark stage. This suggests that the absence of 70$μ$m emission is not a robust indicator of starless/pre-stellar cores.

astro-ph.GA↗

arXiv2021

The SEDIGISM survey: The influence of spiral arms on the molecular gas distribution of the inner Milky Way

The morphology of the Milky Way is still a matter of debate. In order to shed light on uncertainties surrounding the structure of the Galaxy, in this paper, we study the imprint of spiral arms on the distribution and properties of its molecular gas. To do so, we take full advantage of the SEDIGISM survey that observed a large area of the inner Galaxy in the $^{13}$CO(2-1) line at an angular resolution of 28". We analyse the influences of the spiral arms by considering the features of the molecular gas emission as a whole across the longitude-velocity map built from the full survey. Additionally, we examine the properties of the molecular clouds in the spiral arms compared to the properties of their counterparts in the inter-arm regions. Through flux and luminosity probability distribution functions, we find that the molecular gas emission associated with the spiral arms does not differ significantly from the emission between the arms. On average, spiral arms show masses per unit length of $\sim10^5-10^6$ M$_{\odot} $kpc$^{-1}$. This is similar to values inferred from data sets in which emission distributions were segmented into molecular clouds. By examining the cloud distribution across the Galactic plane, we infer that the molecular mass in the spiral arms is a factor of 1.5 higher than that of the inter-arm medium, similar to what is found for other spiral galaxies in the local Universe. We observe that only the distributions of cloud mass surface densities and aspect ratio in the spiral arms show significant differences compared to those of the inter-arm medium; other observed differences appear instead to be driven by a distance bias. By comparing our results with simulations and observations of nearby galaxies, we conclude that the measured quantities would classify the Milky Way as a flocculent spiral galaxy, rather than as a grand-design one.

astro-ph.GA↗

arXiv2020

Continuity of accretion from clumps to Class 0 high-mass protostars in SDC335

The IRDC SDC335.579-0.292 (SDC335) is a massive star-forming cloud found to be globally collapsing towards one of the most massive star forming cores in the Galaxy. SDC335 hosts three high-mass protostellar objects at early stages of their evolution and archival ALMA Cycle 0 data indicate the presence of at least one molecular outflow in the region. Observations of molecular outflows from massive protostellar objects allow us to estimate the accretion rates of the protostars as well as to assess the disruptive impact that stars have on their natal clouds. The aim of this work is to identify and analyse the properties of the protostellar-driven molecular outflows within SDC335 and use these outflows to help refine the properties of the protostars. We imaged the molecular outflows in SDC335 using new data from the ATCA of SiO and Class I CH$_3$OH maser emission (~3 arcsec) alongside observations of four CO transitions made with APEX and archival ALMA CO, $^{13}$CO (~1 arcsec), and HNC data. We introduced a generalised argument to constrain outflow inclination angles based on observed outflow properties. We used the properties of each outflow to infer the accretion rates on the protostellar sources driving them and to deduce the evolutionary characteristics of the sources. We identify three molecular outflows in SDC335, one associated with each of the known compact HII regions. The outflow properties show that the SDC335 protostars are in the early stages (Class 0) of their evolution, with the potential to form stars in excess of 50 M$_{\odot}$. The measured total accretion rate onto the protostars is $1.4(\pm 0.1) \times 10^{-3}$M$_{\odot}$ yr$^{-1}$, comparable to the total mass infall rate toward the cloud centre on parsec scales of 2.5$(\pm 1.0) \times 10^{-3}$M$_{\odot}$ yr$^{-1}$, suggesting a near-continuous flow of material from cloud to core scales. [abridged].

astro-ph.GA↗

arXiv2020

The SEDIGISM survey: first data release and overview of the Galactic structure

The SEDIGISM (Structure, Excitation and Dynamics of the Inner Galactic Interstellar Medium) survey used the APEX telescope to map 84 deg^2 of the Galactic plane between l = -60 deg and l = +31 deg in several molecular transitions, including 13CO(2-1) and C18O(2-1), thus probing the moderately dense (~10^3 cm^-3) component of the interstellar medium. With an angular resolution of 30'' and a typical 1-sigma sensitivity of 0.8-1.0 K at 0.25 km/s velocity resolution, it gives access to a wide range of structures, from individual star-forming clumps to giant molecular clouds and complexes. The coverage includes a good fraction of the first and fourth Galactic quadrants, allowing us to constrain the large scale distribution of cold molecular gas in the inner Galaxy. In this paper we provide an updated overview of the full survey and the data reduction procedures used. We also assess the quality of these data and describe the data products that are being made publicly available as part of this first data release (DR1). We present integrated maps and position-velocity maps of the molecular gas and use these to investigate the correlation between the molecular gas and the large scale structural features of the Milky Way such as the spiral arms, Galactic bar and Galactic centre. We find that approximately 60 per cent of the molecular gas is associated with the spiral arms and these appear as strong intensity peaks in the derived Galactocentric distribution. We also find strong peaks in intensity at specific longitudes that correspond to the Galactic centre and well known star forming complexes, revealing that the 13CO emission is concentrated in a small number of complexes rather than evenly distributed along spiral arms.

astro-ph.GA↗

arXiv2020

The SEDIGISM survey: Molecular clouds in the inner Galaxy

We use the 13CO(2-1) emission from the SEDIGISM high-resolution spectral-line survey of the inner Galaxy, to extract the molecular cloud population with a large dynamic range in spatial scales, using the SCIMES algorithm. This work compiles a cloud catalogue with a total of 10663 molecular clouds, 10300 of which we were able to assign distances and compute physical properties. We study some of the global properties of clouds using a science sample, consisting of 6664 well resolved sources and for which the distance estimates are reliable. In particular, we compare the scaling relations retrieved from SEDIGISM to those of other surveys, and we explore the properties of clouds with and without high-mass star formation. Our results suggest that there is no single global property of a cloud that determines its ability to form massive stars, although we find combined trends of increasing mass, size, surface density and velocity dispersion for the sub-sample of clouds with ongoing high-mass star formation. We then isolate the most extreme clouds in the SEDIGISM sample (i.e. clouds in the tails of the distributions) to look at their overall Galactic distribution, in search for hints of environmental effects. We find that, for most properties, the Galactic distribution of the most extreme clouds is only marginally different to that of the global cloud population. The Galactic distribution of the largest clouds, the turbulent clouds and the high-mass star-forming clouds are those that deviate most significantly from the global cloud population. We also find that the least dynamically active clouds (with low velocity dispersion or low virial parameter) are situated further afield, mostly in the least populated areas. However, we suspect that part of these trends may be affected by some observational biases, and thus require further follow up work in order to be confirmed.

astro-ph.GA↗

arXiv2020

SEDIGISM-ATLASGAL: Dense Gas Fraction and Star Formation Efficiency Across the Galactic Disk

By combining two surveys covering a large fraction of the molecular material in the Galactic disk we investigate the role the spiral arms play in the star formation process. We have matched clumps identified by ATLASGAL with their parental GMCs as identified by SEDIGISM, and use these giant molecular cloud (GMC) masses, the bolometric luminosities, and integrated clump masses obtained in a concurrent paper to estimate the dense gas fractions (DGF$_{\rm gmc}=\sum M_{\rm clump}/M_{\rm gmc}$) and the instantaneous star forming efficiencies (i.e., SFE$_{\rm gmc} = \sum L_{\rm clump}/M_{\rm gmc}$). We find that the molecular material associated with ATLASGAL clumps is concentrated in the spiral arms ($\sim$60% found within $\pm$10 km s$^{-1}$ of an arm). We have searched for variations in the values of these physical parameters with respect to their proximity to the spiral arms, but find no evidence for any enhancement that might be attributable to the spiral arms. The combined results from a number of similar studies based on different surveys indicate that, while spiral-arm location plays a role in cloud formation and HI to H$_2$ conversion, the subsequent star formation processes appear to depend more on local environment effects. This leads us to conclude that the enhanced star formation activity seen towards the spiral arms is the result of source crowding rather than the consequence of a any physical process.

astro-ph.GA↗

arXiv2020

CHIMPS2: Survey description and $^{12}$CO emission in the Galactic Centre

The latest generation of Galactic-plane surveys is enhancing our ability to study the effects of galactic environment upon the process of star formation. We present the first data from CO Heterodyne Inner Milky Way Plane Survey 2 (CHIMPS2). CHIMPS2 is a survey that will observe the Inner Galaxy, the Central Molecular Zone (CMZ), and a section of the Outer Galaxy in $^{12}$CO, $^{13}$CO, and C$^{18}$O $(J = 3\rightarrow2)$ emission with the Heterodyne Array Receiver Program on the James Clerk Maxwell Telescope (JCMT). The first CHIMPS2 data presented here are a first look towards the CMZ in $^{12}$CO J = 3$\rightarrow$2 and cover $-3^{\circ}\leq\,\ell\,\leq\,5^{\circ}$ and $\mid$b$\mid \leq 0.5^{\circ}$ with angular resolution of 15 arcsec, velocity resolution of 1 km s$^{-1}$, and rms $ΔT_A ^\ast =$ 0.58 K at these resolutions. Such high-resolution observations of the CMZ will be a valuable data set for future studies, whilst complementing the existing Galactic Plane surveys, such as SEDIGISM, the Herschel infrared Galactic Plane Survey, and ATLASGAL. In this paper, we discuss the survey plan, the current observations and data, as well as presenting position-position maps of the region. The position-velocity maps detect foreground spiral arms in both absorption and emission.

astro-ph.GA↗

arXiv2020

The accretion history of high-mass stars: An ArTéMiS pilot study of Infrared Dark Clouds

The mass growth of protostars is a central element to the determination of fundamental stellar population properties such as the initial mass function. Constraining the accretion history of individual protostars is therefore an important aspect of star formation research. The goal of the study presented here is to determine whether high-mass (proto)stars gain their mass from a compact (<0.1pc) fixed-mass reservoir of gas, often referred to as dense cores, in which they are embedded, or whether the mass growth of high-mass stars is governed by the dynamical evolution of the parsec-scale clump that typically surrounds them. To achieve this goal, we performed a 350micron continuum mapping of 11 infrared dark clouds, along side some of their neighbouring clumps, with the ArTéMiS camera on APEX. By identifying about 200 compact ArTéMiS sources, and matching them with Herschel Hi-GAL 70micron sources, we have been able to produce mass vs. temperature diagrams. We compare the nature (i.e. starless or protostellar) and location of the ArTéMiS sources in these diagrams with modelled evolutionary tracks of both core-fed and clump-fed accretion scenarios. We argue that the latter provide a better agreement with the observed distribution of high-mass star-forming cores. However, a robust and definitive conclusion on the question of the accretion history of high-mass stars requires larger number statistics.

astro-ph.GA↗

arXiv2019

Multi-scale dynamics in star-forming regions: the interplay between gravity and turbulence

In this work we investigate the interplay between gravity and turbulence at different spatial scales and in different density regimes. We analyze a sample of 70 $μ$m quiet clumps that are divided into three surface density bins and we compare the dynamics of each group with the dynamics of their respective filaments. The densest clumps form within the densest filaments on average, and they have the highest value of the velocity dispersion. The kinetic energy is transferred from the filaments down to the clumps most likely through a turbulent cascade, but we identify a critical value of the surface density, $Σ\simeq0.1$ g cm$^{2}$, above which the dynamics changes from being mostly turbulent-driven to mostly gravity-driven. The scenario we obtain from our data is a continuous interplay between turbulence and gravity, where the former creates structures at all scales and the latter takes the lead when the critical surface density threshold is reached. In the densest filaments this transition can occur at the parsec, or even larger scales, leading to a global collapse of the whole region and most likely to the formation of the massive objects.

astro-ph.GA↗

arXiv2019

The CARMA-NRO Orion Survey: The filamentary structure as seen in C$^{18}$O emission

We present an initial overview of the filamentary structure in the Orion A molecular cloud utilizing a high angular and velocity resolution C$^{18}$O(1-0) emission map that was recently produced as part of the CARMA-NRO Orion Survey. The main goal of this study is to build a credible method to study varying widths of filaments which has previously been linked to star formation in molecular clouds. Due to the diverse star forming activities taking place throughout its $\sim$20 pc length, together with its proximity of 388 pc, the Orion A molecular cloud provides an excellent laboratory for such an experiment to be carried out with high resolution and high sensitivity. Using the widely-known structure identification algorithm, DisPerSE, on a 3-dimensional (PPV) C$^{18}$O cube, we identified 625 relatively short (the longest being 1.74 pc) filaments over the entire cloud. We study the distribution of filament widths using FilChaP, a python package that we have developed and made publicly available. We find that the filaments identified in a 2 square degree PPV cube do not overlap spatially, except for the complex OMC-4 region that shows distinct velocity components along the line of sight. The filament widths vary between 0.02 and 0.3 pc depending on the amount of substructure that a filament possesses. The more substructure a filament has, the larger is its width. We also find that despite this variation, the filament width shows no anticorrelation with the central column density which is in agreement with previous Herschel observations.

astro-ph.GA↗