arXiv subjects

A. E. Hubbard

Publications and source records attributed to A. E. Hubbard.

7 recordsLinked to original sources

arXiv2026

Empirical impact of near-separatrix plasma and neutral transport on the pedestal in the transition between EDA and ELMy H-modes on Alcator C-Mod

The transition between the ELMy H-mode and the EDA H-mode is studied on Alcator C-Mod using an experimental database and predictive pedestal models. High-resolution Thomson scattering measurements are used to compare the pedestal density, $n_{e}^\mathrm{ped}$, and the separatrix density, $n_{e}^\mathrm{sep}$ with main chamber neutral measurements. $n_{e}^\mathrm{ped}$ is sensitive to neutral sources only in the ELMy H-mode regime and not in the EDA H-mode regime. Density fluctuation spectra reveal that quasi-coherent structures become stronger at higher densities and more coherent in the EDA relative to the inter-ELM phases of ELMy H-modes, before weakening again at the highest values of $n_{e}^\mathrm{ped}$. The Saarelma-Connor pedestal density prediction model is validated for ELMy H-modes up to $n_{e}^\mathrm{ped} = 2.0 \times 10^{20}$ m$^{-3}$. An additional transport channel driven by resistive ballooning modes (RBM), $D_\mathrm{RBM}$, scaling directly with $α_{t}$ and inversely with $k_\mathrm{RBM}^{2}\hat{q}_\mathrm{cyl}$ is shown to improve the prediction for EDA H-modes, finding good model agreement up to $n_{e}^\mathrm{ped} = 3.0 \times 10^{20}$ m$^{-3}$. EPED scans in $n_{e}^\mathrm{ped}$ are then performed at three values of $n_{e}^\mathrm{sep}/n_{e}^\mathrm{ped}$. Increasing this ratio moves the peeling-ballooning branch transition to lower $n_{e}^\mathrm{ped}$, increasing $p^\mathrm{ped}$ in the peeling branch and decreasing it in the ballooning branch. Agreement is found for large ELM H-modes. SPARC pedestal density predictions for an ELMy and an EDA/QCE-like H-mode are performed and found consistent with assumptions used in previous EPED modeling. Inclusion of $D_\mathrm{RBM}$ significantly weakens the density gradient near the separatrix, lowering $n_{e}^\mathrm{ped}$ by approximately 20%.

physics.plasm-ph↗

arXiv2026

Experimental Evidence for Increased Particle Fluxes Due to a Change in Transport at the Separatrix near Density Limits on Alcator C-Mod

Experimental inferences of cross-field particle flux at the separatrix, $Γ_{\perp}^\mathrm{sep}$, show rapid growth near H-mode and L-mode density limits at high magnetic field on Alcator C-Mod. Increases in $Γ_{\perp}^\mathrm{sep}$ correlate well with proximity to high density operational boundaries as proposed by the separatrix operational space model. $Γ_{\perp}^\mathrm{sep}$ grows as the L-mode density limit and the H-L-mode back transition boundaries are approached, consistent with expectations of plasma instability-driven turbulence suggested by theory, confirming the power dependence of density limits. $Γ_{\perp}^\mathrm{sep}$ is well-organized by the characteristic wavenumber for resistive ballooning mode turbulence, $k_\mathrm{RBM}$, from interchange-drift-Alfvén fluid turbulence theory, with additional dependence on the cylindrical safety factor, $\hat{q}_\mathrm{cyl}$, yielding an empirical limit to plasma operation of $k_\mathrm{RBM}^{2}\hat{q}_\mathrm{cyl} = 1$. This limit corresponds to the point where the perpendicular heat flux, $Q_{\perp}$, reaches the level of the parallel heat flux, $Q_{\parallel}$, i.e. $Q_{\perp} \approx Q_{\parallel}$, beyond which point thermal equilibrium is not satisfied, resulting in a fold catastrophe.

physics.plasm-ph↗

arXiv2024

Determination of confinement regime boundaries via separatrix parameters on Alcator C-Mod based on a model for interchange-drift-Alfvén turbulence

The separatrix operational space (SepOS) model [Eich \& Manz, \emph{Nuclear Fusion} (2021)] is shown to predict the L-H transition, the L-mode density limit, and the ideal MHD ballooning limit in terms of separatrix parameters for a wide range of Alcator C-Mod plasmas. The model is tested using Thomson scattering measurements across a wide range of operating conditions on C-Mod, spanning $\overline{n}_{e} = 0.3 - 5.5 \times 10^{20}$m$^{-3}$, $B_{t} = 2.5 - 8.0$ T, and $B_{p} = 0.1 - 1.2$ T. An empirical regression for the electron pressure gradient scale length, $λ_{p_{e}}$, against a turbulence control parameter, $α_{t}$, and the poloidal fluid gyroradius, $ρ_{s,p}$, for H-modes is constructed and found to require positive exponents for both regression parameters, indicating turbulence widening of near-SOL widths at high $α_{t}$ and an inverse scaling with $B_{p}$, consistent with results on AUG. The SepOS model is also tested in the unfavorable drift direction and found to apply well to all three boundaries, including the L-H transition as long as a correction to the Reynolds energy transfer term, $α_\mathrm{RS} < 1$ is applied. I-modes typically exist in the unfavorable drift direction for values of $α_{t} \lesssim 0.35$. Finally, an experiment studying the transition between the type-I ELMy and EDA H-mode is analyzed using the same framework. It is found that a recently identified boundary at $α_{t} = 0.55$ excludes most EDA H-modes but that the balance of wavenumbers responsible for the L-mode density limit, namely $k_\mathrm{EM} = k_\mathrm{RBM}$, may better describe the transition on C-Mod. The ensemble of boundaries validated and explored is then applied to project regime access and limit avoidance for the SPARC primary reference discharge parameters.

physics.plasm-ph↗

arXiv2021

I-mode pedestal relaxation events in the Alcator C-Mod and ASDEX Upgrade tokamaks

In some conditions, I-mode plasmas can feature pedestal relaxation events (PREs) that transiently enhance the energy reaching the divertor target plates. To shed light into their appearance, characteristics and energy reaching the divertor targets, a comparative study between two tokamaks $-$ Alcator C-Mod and ASDEX Upgrade $-$ is carried out. It is found that PREs appear only in a subset of I-mode discharges, mainly when the plasma is close to the H-mode transition. Also, the nature of the triggering instability is discussed by comparing measurements close to the separatrix in both devices. The PRE relative energy loss from the confined region increases with decreasing pedestal top collisionality $ν_{\mathrm{ped}}^*$. In addition, the relative electron temperature drop at the pedestal top, which is related to the conductive energy loss, rises with decreasing $ν_{\mathrm{ped}}^*$. Finally, the peak parallel energy fluence due to the PRE measured on the divertor in both devices is compared to the model introduced in [1] for type-I ELMs. The model is shown to provide an upper boundary for PRE energy fluence data, while a lower boundary is found by dividing the model by three. These two boundaries are used to make projections to future devices such as DEMO and ARC.

physics.plasm-ph↗

arXiv2020

Inference of Experimental Radial Impurity Transport on Alcator C-Mod: Bayesian Parameter Estimation and Model Selection

We present a fully Bayesian approach for the inference of radial profiles of impurity transport coefficients and compare its results to neoclassical, gyrofluid and gyrokinetic modeling. Using nested sampling, the Bayesian Impurity Transport InferencE (BITE) framework can handle complex parameter spaces with multiple possible solutions, offering great advantages in interpretative power and reliability with respect to previously demonstrated methods. BITE employs a forward model based on the pySTRAHL package, built on the success of the well-known STRAHL code [Dux, IPP Report, 2004], to simulate impurity transport in magnetically-confined plasmas. In this paper, we focus on calcium (Ca, Z=20) Laser Blow-Off injections into Alcator C-Mod plasmas. Multiple Ca atomic lines are diagnosed via high-resolution X-ray Imaging Crystal Spectroscopy and Vacuum Ultra-Violet measurements. We analyze a sawtoothing I-mode discharge for which neoclassical and turbulent (quasilinear and nonlinear) predictions are also obtained. We find good agreement in diffusion across the entire radial extent, while turbulent convection and density profile peaking are estimated to be larger in experiment than suggested by theory. Efforts and challenges associated with the inference of experimental pedestal impurity transport are discussed.

physics.plasm-ph↗

arXiv2020

Gyrokinetics investigations of an I-mode pedestal on Alcator C-Mod

Naturally stable to ELMs, and with widths larger than EPED predictions, the I-modes are an excellent laboratory for investigating the role of drift micro-instabilities in pedestals since I-mode pedestal are not "limited" by MHD instabilities. We present here a study based on gyrokinetic simulations (using GENE) to model fluctuations and heat transport in the I-mode pedestals in C-Mod. We find the Weakly Coherent Mode observed on C-Mod I-mode to be an electrostatic Ion Temperature Gradient/Impurity density gradient (ITG/Impurity) driven mode. The ITG/Impurity mode match frequency and the impurity confinement time observed on the I-mode. Nonlinear ETG simulations, can match experimental heat flux with profile adjustment well within experimental error bars. Simulations, varying impurity level (Zeff) and temperature and density profiles (within experimental error bars), are used to probe the sensitivity of fluctuations and transport.

physics.plasm-ph↗

arXiv2017

A fast low-to-high mode bifurcation dynamics in a tokamak edge plasma gyrokinetic simulation

Transport barrier formation and its relation to sheared flows in fluids and plasmas are of fundamental interest in various natural and laboratory observations and of critical importance in achieving an economical energy production in a magnetic fusion device. Here we report the first observation of an edge transport barrier formation event in a gyrokinetic simulation carried out in a realistic tokamak edge geometry. The results show that turbulent Reynolds stress driven sheared ExB flows act in concert with neoclassical orbit loss to quench turbulent transport and form a transport barrier just inside the last closed magnetic flux surface.

physics.plasm-ph↗