Searcharxiv⌕ Search

arXiv subjects

A. Gusdorf

Publications and source records attributed to A. Gusdorf.

At least 37 records · Page 2Linked to original sources

ALMA-IMF. V. Prestellar and protostellar core populations in the W43 cloud complex

The origin of the stellar initial mass function (IMF) and its relation with the core mass function (CMF) are actively debated issues with important implications in astrophysics. Recent observations in the W43 molecular complex of top-heavy CMFs, with an excess of high-mass cores compared to the canonical mass distribution, raise questions about our understanding of the star formation processes and their evolution in space and time. We aim to compare populations of protostellar and prestellar cores in three regions imaged in the ALMA-IMF Large Program. We created an homogeneous core catalogue in W43, combining a new core extraction in W43-MM1 with the catalogue of W43-MM2&MM3 presented in a previous work. Our detailed search for protostellar outflows enabled us to identify between 23 and 30 protostellar cores out of 127 cores in W43-MM1 and between 42 and 51 protostellar cores out of 205 cores in W43-MM2&MM3. Cores with neither outflows nor hot core emission are classified as prestellar candidates. We found a similar fraction of cores which are protostellar in the two regions, about 35%. This fraction strongly varies in mass, from 15-20% at low mass, between 0.8 and 3$M_{\odot} $ up to about 80% above 16$M_{\odot}$. Protostellar cores are found to be, on average, more massive and smaller in size than prestellar cores. Our analysis also revealed that the high-mass slope of the prestellar CMF in W43, $α=-1.46_{-0.19}^{+0.12}$, is consistent with the Salpeter slope, and thus the top-heavy form measured for the global CMF, $α=-0.96$, is due to the protostellar core population. Our results could be explained by clump-fed models in which cores grow in mass, especially during the protostellar phase, through inflow from their environment. The difference between the slopes of the prestellar and protostellar CMFs moreover implies that high-mass cores grow more in mass than low-mass cores.

astro-ph.GA↗

ALMA-IMF VI -- Investigating the origin of stellar masses: Core mass function evolution in the W43-MM2&MM3 mini-starburst

Among the most central open questions regarding the initial mass function (IMF) of stars is the impact of environment on the shape of the core mass function (CMF) and thus potentially on the IMF. The ALMA-IMF Large Program aims to investigate the variations in the core distributions with cloud characteristics, as diagnostic observables of the formation process and evolution of clouds. The present study focuses on the W43-MM2&MM3 mini-starburst, whose CMF has recently been found to be top-heavy with respect to the Salpeter slope. W43-MM2&MM3 harbors a rich cluster that contains a statistically significant number of cores, which was previously characterized in Paper III. We applied a multi-scale decomposition technique to the ALMA 1.3 mm and 3 mm continuum images to define six subregions. For each subregion we characterized the high column density probability distribution function, n-PDF, and the shape of the cloud gas using the 1.3 mm image. Using the core catalog, we investigate correlations between the CMF and cloud and core properties. We classify the subregions into different stages of evolution, from quiescent to burst to post-burst, based on the surface number density of cores, number of outflows, and UCHii presence. The high-mass end of the subregion CMFs varies from being close to the Salpeter slope (quiescent) to top-heavy (burst and post-burst). Moreover, the second tail of the n-PDF varies from steep, to flat like observed for the high mass star-forming clouds. We found that subregions with flat second n-PDF tails display top-heavy CMFs. The CMF may evolve from Salpeter to top-heavy throughout the star formation process from the quiescent to the burst phase. This scenario raises the question of if the CMF might revert again to Salpeter as the cloud approaches the end of its star formation stage, a hypothesis that remains to be tested.

astro-ph.GA↗

Modelling the early mass-ejection in jet driven protostellar outflows. Lessons from Cep E

We have used the axisymmetric chemo-hydrodynamical code WALKIMYA-2D to numerically model and reproduce the physical and CO emission properties of the jet-driven outflow from the intermediate-mass protostar Cep E, which was observed at $\sim 800$au resolution in the CO $J=2\to 1$ line with the IRAM interferometer. Our simulations take into account the observational constraints available on the physical structure of the protostellar envelope to provide constraints on the dynamics of the inner protostellar environment from the study of the outflow/jet propagation away from the launch region. WALKIMYA-2D successfully reproduces the main qualitative and quantitative features of the Cep E outflow and the jet kinematics, naturally accounting for their time variability. Signatures of internal shocks are detected as knots along the jet. In the early times of the ejection process, the young emitted knots interact with the dense circumstellar envelope through high-velocity, dissociative shocks, which strongly decrease the CO gas abundance in the jet. As time proceeds, the knots propagate more smoothly through the envelope and dissociative shocks disappear after $\sim 10^3$ yr. The distribution of CO abundance along the jet shows that the latter bears memory of the early dissociative phase in the course of its propagation. Analysis of the velocity field shows that the jet material mainly consists of gas entrained from the circumstellar envelope and accelerated away from the protostar at $700$ au scale. As a result, the overall jet mass loss rate appears higher than the actual mass ejection rate by a factor $\sim 3$. Numerical modeling of the Cep E jet-driven outflow and comparison with the CO observations have allowed us to peer into the outflow formation mechanism with unprecedented detail and to retrieve the history of the mass-loss events that have shaped the outflow.

astro-ph.SR↗

ALMA-IMF IV -- A comparative study of the main hot cores in W43-MM1: detection, temperature and molecular composition

W43-MM1 is a young region, very rich in terms of high-mass star formation. We aim to systematically identify the massive cores which contain a hot core and compare their molecular composition. We used ALMA high-spatial resolution (2500 au) data of W43-MM1 to identify line-rich protostellar cores and make a comparative study of their temperature and molecular composition. The identification of hot cores is based on both the spatial distribution of the complex organic molecules and the contribution of molecular lines relative to the continuum intensity. We rely on the analysis of CH3CN and CH3CCH to estimate the temperatures of the selected cores. Finally, we rescale the spectra of the different hot cores based on their CH3OCHO line intensities to directly compare the detections and line intensities of the other species. W43-MM1 turns out to be a region rich in massive hot cores with at least 1 less massive and 7 massive hot cores. The excitation temperature of CH3CN is of the same order for all of them (120-160 K). There is a factor of up to 30 difference in the intensity of the complex organic molecules (COMs) lines. However the molecular emission of the hot cores appears to be the same within a factor 2-3. This points towards both a similar chemical composition and excitation of most of the COMs over these massive cores, which span about an order of magnitude in core mass. In contrast, CH3CCH emission is found to preferentially trace more the envelope, with a temperature ranging from 50 K to 90 K. Core 1, the most massive hot core of W43-MM1, shows a richer line spectrum than the other cores. In core 2, the emission of O-bearing molecules does not peak at the dust continuum core center; the blue and red shifted emission correspond to the outflow lobes, suggesting a formation via the sublimation of the ice mantles through shocks or UV irradiation on the walls of the cavity.

astro-ph.GA↗

ALMA-IMF III -- Investigating the origin of stellar masses: Top-heavy core mass function in the W43-MM2&MM3 mini-starburst

The ALMA-IMF Large Program observed the W43-MM2-MM3 ridge, whose 1.3mm and 3mm ALMA 12m array continuum images reach a 2500au spatial resolution. We used both the best-sensitivity and the line-free ALMA-IMF images, reduced the noise with the multi-resolution segmentation technique MnGSeg, and derived the most complete and most robust core catalog possible. Using two different extraction software packages, getsf and GExt2D, we identified 200 compact sources, whose 100 common sources have on average fluxes consistent to within 30%. We filtered sources with non-negligible free-free contamination and corrected fluxes from line contamination, resulting in a W43-MM2-MM3 catalog of 205 getsf cores. With a median deconvolved FWHM size of 3400au, core masses range from 0.1Msun to 70Msun and the getsf catalog is 90% complete down to 0.8Msun. The high-mass end of the core mass function (CMF) of W43-MM2-MM3 is top-heavy compared to the canonical IMF. Fitting the cumulative CMF with a single power law of the form N(>logM)\propto M^a, we measured a=-0.95\pm0.04, compared to the canonical a=-1.35 Salpeter IMF slope. The slope of the CMF is robust with respect to map processing, extraction software package, and reasonable variations in the assumptions taken to estimate core masses. We explore several assumptions on how cores transfer their mass to stars and sub-fragment to predict the IMF resulting from the W43-MM2-MM3 CMF. In stark contrast to the commonly accepted paradigm, our result argues against the universality of the CMF shape. More robust functions of the star-formation efficiency and core sub-fragmentation are required to better predict the resulting IMF, here suggested to remain top-heavy at the end of the star-formation phase. If confirmed, the IMFs emerging from starburst events could inherit their top-heavy shape from their parental CMFs, challenging the IMF universality.

astro-ph.GA↗

Mass ejection and time variability in protostellar outflows: Cep E. SOLIS XVI

Protostellar jets are an important agent of star formation feedback, tightly connected with the mass-accretion process. The history of jet formation and mass-ejection provides constraints on the mass accretion history and the nature of the driving source. We want to characterize the time-variability of the mass-ejection phenomena at work in the Class 0 protostellar phase, in order to better understand the dynamics of the outflowing gas and bring more constraints on the origin of the jet chemical composition and the mass-accretion history. We have observed the emission of the CO 2-1 and SO N_J=5_4-4_3 rotational transitions with NOEMA, towards the intermediate-mass Class 0 protostellar system Cep E. The CO high-velocity jet emission reveals a central component associated with high-velocity molecular knots, also detected in SO, surrounded by a collimated layer of entrained gas. The gas layer appears to accelerate along the main axis over a length scale delta_0 ~700 au, while its diameter gradually increases up to several 1000au at 2000au from the protostar. The jet is fragmented into 18 knots of mass ~10^-3 Msun, unevenly distributed between the northern and southern lobes, with velocity variations up to 15 km/s close to the protostar, well below the jet terminal velocities. The knot interval distribution is approximately bimodal with a scale of ~50-80yr close to the protostar and ~150-200yr at larger distances >12". The mass-loss rates derived from knot masses are overall steady, with values of 2.7x10^-5 Msun/yr (8.9x10^-6 Msun/yr) in the northern (southern) lobe. The interaction of the ambient protostellar material with high-velocity knots drives the formation of a molecular layer around the jet, which accounts for the higher mass-loss rate in the north. The jet dynamics are well accounted for by a simple precession model with a period of 2000yr and a mass-ejection period of 55yr.

astro-ph.SR↗

ALMA-IMF I -- Investigating the origin of stellar masses: Introduction to the Large Program and first results

The ALMA-IMF Large Program imaged a total noncontiguous area of 53pc2, covering 15 extreme, nearby protoclusters of the Milky Way. They were selected to span relevant early protocluster evolutionary stages. Our 1.3mm and 3mm observations provide continuum images that are homogeneously sensitive to point-like cores with masses of 0.2 and 0.6Msun, respectively, with a matched spatial resolution of 2000au. We also detect lines that probe the protocluster structure, kinematics, chemistry, and feedback over scales from clouds to filaments to cores. We classify ALMA-IMF protoclusters as Young, Intermediate, or Evolved based on the amount of dense gas in the cloud that has potentially been impacted by HII regions. The ALMA-IMF catalog contains 700 cores that span a mass range of 0.15-250Msun at a typical size of 2100au. We show that this core sample has no significant distance bias and can be used to build core mass functions at similar physical scales. Significant gas motions, which we highlight here in the G353.41 region, are traced down to core scales and can be used to look for inflowing gas streamers and to quantify the impact of the possible associated core mass growth on the shape of the CMF with time. Our first analysis does not reveal any significant evolution of the matter concentration from clouds to cores or from the youngest to more evolved protoclusters, indicating that cloud dynamical evolution and stellar feedback have for the moment only had a slight effect on the structure of high-density gas in our sample. Furthermore, the first-look analysis of the line richness toward bright cores indicates that the survey encompasses several tens of hot cores, of which we highlight the most massive in the G351.77 cloud. Their homogeneous characterization can be used to constrain the emerging molecular complexity in protostars of high to intermediate masses.

astro-ph.GA↗

Interstellar anatomy of the TeV gamma-ray peak in the IC443 supernova remnant

Supernovae remnants (SNRs) represent a major feedback source from stars on the interstellar medium of galaxies. During the latest stage of supernovae explosions, shock waves produced by the initial blast modify the chemistry of gas and dust, inject kinetic energy in the surroundings, and may alter star formation characteristics. Simultaneously, gamma-ray emission is generated by the interaction between the ambiant medium and the cosmic rays. We study the stellar and interstellar contents of IC443, an evolved shell type SNR at a distance of 1.9 kpc, with an estimated age of 30 kyr. We aim to measure the mass of the gas within the extended G region, which corresponds to the peak of gamma-ray emission detected by VERITAS and Fermi. We performed 10'x10' mapped observations of 12CO and 13CO J=1-0, J=2-1 and J=3-2 pure rotational lines, as well as C18O J=1-0 and J=2-1 obtained with the IRAM-30m and APEX telescopes. We first compared our data with local thermodynamic equilbrium (LTE) models. We estimated the optical depth of each line from the emission of the isotopologues 13CO and C18O. We used the population diagram and large velocity gradient (LVG) assumption to measure the column density, mass, and kinetic temperature of the gas using 12CO and 13CO lines. We used complementary data (stars, gas, and dust at multiple wavelengths) and infrared point source catalogues to search for protostar candidates. Our results emphasize how the mass associated with the ring-like structure and the cloudlet cannot be overlooked when quantifying the interaction of cosmic rays with the dense local medium. Additionally, the presence of numerous possible protostars in the region might represent a fresh source of CR, which must also be taken into account in the interpretation of gamma-ray observations in this region.

astro-ph.HE↗

FEEDBACK: a SOFIA Legacy Program to Study Stellar Feedback in Regions of Massive Star Formation

FEEDBACK is a SOFIA legacy program dedicated to study the interaction of massive stars with their environment. It performs a survey of 11 galactic high mass star forming regions in the 158 $μ$m (1.9 THz) line of CII and the 63 $μ$m (4.7 THz) line of OI. We employ the 14 pixel LFA and 7 pixel HFA upGREAT instrument to spectrally resolve (0.24 MHz) these FIR structure lines. With an observing time of 96h, we will cover $\sim$6700 arcmin$^2$ at 14.1$''$ angular resolution for the CII line and 6.3$''$ for the OI line. The observations started in spring 2019 (Cycle 7). Our aim is to understand the dynamics in regions dominated by different feedback processes from massive stars such as stellar winds, thermal expansion, and radiation pressure, and to quantify the mechanical energy injection and radiative heating efficiency. The CII line provides the kinematics of the gas and is one of the dominant cooling lines of gas for low to moderate densities and UV fields. The OI line traces warm and high-density gas, excited in photodissociations regions with a strong UV field or by shocks. The source sample spans a broad range in stellar characteristics from single OB stars, to small groups of O stars, to rich young stellar clusters, to ministarburst complexes. It contains well-known targets such as Aquila, the Cygnus X region, M16, M17, NGC7538, NGC6334, Vela, and W43 as well as a selection of HII region bubbles, namely RCW49, RCW79, and RCW120. These CII maps, together with the less explored OI 63 $μ$m line, provide an outstanding database for the community. They will be made publically available and will trigger further studies and follow-up observations.

astro-ph.GA↗

Dense gas formation in the Musca filament due to the dissipation of a supersonic converging flow

Observations with the Herschel Space Telescope have established that most of the star forming gas is organised in interstellar filaments, a finding that is supported by numerical simulations of the supersonic interstellar medium (ISM) where dense filamentary structures are ubiquitous. We aim to understand the formation of these dense structures by performing observations covering the $^{12}$CO(4-3), $^{12}$CO(3-2), and various CO(2-1) isotopologue lines of the Musca filament, using the APEX telescope. The observed CO intensities and line ratios cannot be explained by PDR (photodissociation region) emission because of the low ambient far-UV field that is strongly constrained by the non-detections of the [C II] line at 158 $μ$m and the [O I] line at 63 $μ$m, observed with the upGREAT receiver on SOFIA, as well as a weak [C I] 609 $μ$m line detected with APEX. We propose that the observations are consistent with a scenario in which shock excitation gives rise to warm and dense gas close to the highest column density regions in the Musca filament. Using shock models, we find that the CO observations can be consistent with excitation by J-type low-velocity shocks. A qualitative comparison of the observed CO spectra with synthetic observations of dynamic filament formation simulations shows a good agreement with the signature of a filament accretion shock that forms a cold and dense filament from a converging flow. The Musca filament is thus found to be dense molecular post-shock gas. Filament accretion shocks that dissipate the supersonic kinetic energy of converging flows in the ISM may thus play a prominent role in the evolution of cold and dense filamentary structures.

astro-ph.GA↗

DeGaS-MC: Dense Gas Survey in the Magellanic Clouds I -- An APEX survey of HCO+ and HCN(2-1) toward the LMC and SMC

Investigating star formation requires precise knowledge of the properties of the dense molecular gas. The low metallicity and wide range of star formation activity of the Large and Small Magellanic Clouds make them prime laboratories to study how local physical conditions impact the dense gas reservoirs. The aim of the Dense Gas Survey for the Magellanic Clouds (DeGaS-MC) project is to expand our knowledge of the relation between dense gas properties and star formation activity by targeting the LMC and SMC observed in the HCO+(2-1) and HCN(2-1) transitions. We carried out a pointing survey toward 30 LMC and SMC molecular clouds using the SEPIA180 instrument installed on the APEX telescope and a follow-up mapping campaign in 13 star-forming regions. This first paper provides line characteristic catalogs and integrated line-intensity maps of the sources. HCO+(2-1) is detected in 20 and HCN(2-1) in 8 of the 29 pointings observed. The dense gas velocity pattern follows the line-of-sight velocity field derived from the stellar population. The HCN emission is less extended than the HCO+ emission. The HCO+(2-1)/HCN(2-1) brightness temperature ratios range from 1 to 7, which is consistent with the large ratios commonly observed in low-metallicity environments. A larger number of young stellar objects are found at high HCO+ intensities and lower HCO+/HCN flux ratios, and thus toward denser lines of sight. The dense gas luminosities correlate with the star formation rate traced by the total infrared luminosity over the two orders of magnitude covered by our observations, although substantial region-to-region variations are observed.

astro-ph.GA↗

Constraining MHD disk winds with ALMA. Apparent rotation signatures and application to HH212

Large millimeter interferometers are revealing a growing number of rotating outflows, which are suggested to trace magneto-centrifugal disk winds (MHD DWs). However, their impact on disk accretion is not yet well quantified. Here we identify systematic biases in retrieving the true launch zone, magnetic lever arm, and angular momentum flux of an MHD DW from apparent rotation signatures. Synthetic position-velocity cuts are constructed from self-similar MHD DWs over a broad range of parameters, and three different methods are applied for estimating the specific angular momentum. We find that the launch radius inferred using the well-known relation from Anderson et al. (2006) can markedly differ from the true outermost launch radius $r_{out}$ of the DW. The "double-peak separation" and "flow width" methods provide only a strict lower limit to $r_{out}$. This bias is independent of angular resolution and can reach a factor ten. In contrast, the "rotation curve" method gives a good estimate of $r_{out}$ when the flow is well resolved, and an upper limit otherwise. The magnetic lever arm is always underestimated. Only comparison with synthetic predictions can take into account properly all observational effects. As an application, we present a comparison with ALMA observations of HH212 at resolutions from 250 au to 16 au, which represents the most stringent observational test of MHD DW to date. This comparison confirms our predicted biases for the double-peak separation method, and the large $r_{out}\sim40~$au and small magnetic lever arm first suggested by Tabone et al. (2017). We also derive the first accurate analytical expression for the fraction of disk angular momentum extracted by an MHD disk wind of given radial extent, magnetic lever arm, and mass flux. Application to HH212 confirms that MHD DWs are serious candidates for the steady angular momentum extraction process in young disks.

astro-ph.SR↗

Episodic accretion constrained by a rich cluster of outflows

The accretion history of protostars remains widely mysterious even though it represents one of the best ways to understand the protostellar collapse that leads to the formation of stars. Molecular outflows are here used to characterize the protostellar accretion phase in W43-MM1. The W43-MM1 protocluster host a sufficient number of protostars to statistically investigate molecular outflows in a single, homogeneous region. We used the CO(2-1) and SiO(5-4) line datacubes, taken as part of an ALMA mosaic with a 2000 AU resolution, to search for protostellar outflows, evaluate the influence that the environment has on these outflows' characteristics and put constraints on outflow variability in W43-MM1. We discovered a rich cluster of 46 outflow lobes, driven by 27 protostars with masses of 1-100 Msun. The complex environment inside which these outflow lobes develop has a definite influence on their length, limiting the validity of using outflows' dynamical timescales as a proxy of the ejection timescale in clouds with high dynamics and varying conditions. We performed a detailed study of Position-Velocity (PV) diagrams of outflows that revealed clear events of episodic ejection. The time variability of W43-MM1 outflows is a general trend and is more generally observed than in nearby, low- to intermediate-mass star-forming regions. The typical timescale found between two ejecta, about 500 yr, is consistent with that found in nearby protostars. If ejection episodicity reflects variability in the accretion process, either protostellar accretion is more variable or episodicity is easier to detect in high-mass star-forming regions than in nearby clouds. The timescale found between accretion events could be resulting from disk instabilities, associated with bursts of inflowing gas arising from the dynamical environment of high-mass star-forming cores.

astro-ph.GA↗

Warm gas in protostellar outflows. II. EHV jet and outflows from OMC-2/3

OMC-2/3 is one of the nearest embedded cluster-forming region that includes intermediate-mass protostars at early stages of evolution. A previous CO (3--2) mapping survey towards this region revealed outflow activity related to sources at different evolutionary phases. The present work aims to study the warm gas in the high-velocity emission from several outflows found in CO (3--2) emission by previous observations, determine their physical conditions, and make comparison with previous results in low-mass star-forming regions. We use the CHAMP+ heterodyne array on the APEX telescope to map the CO (6--5) and CO (7--6) emission in the OMC-2 FIR 6 and OMC-3 MMS 1-6 regions, and to observe $^{13}$CO (6--5) at selected positions. We analyze these data together with previous CO (3--2) observations. In addition, we mapped the SiO (5--4) emission in OMC-2 FIR 6. The CO (6--5) emission was detected in most of the outflow lobes in the mapped regions, while the CO (7--6) was found mostly from the OMC-3 outflows. In the OMC-3 MMS 5 outflow, a previously undetected extremely high velocity gas was found in CO (6--5). This extremely high velocity emission arises from the regions close to the central object MMS 5. Radiative transfer models revealed that the high-velocity gas from MMS 5 outflow consists of gas with $n_{\rm H_2}=$10$^4$--10$^{5}$ cm$^{-3}$ and $T>$ 200 K, similar to what is observed in young Class 0 low-mass protostars. For the other outflows, values of $n_{\rm H_2}>$10$^{4}$ cm$^{-3}$ were found. The physical conditions and kinematic properties of the young intermediate-mass outflows presented here are similar to those found in outflows from Class 0 low-mass objects. Due to their excitation requirements, mid$-J$ CO lines are good tracers of extremely high velocity gas in young outflows likely related to jets.

astro-ph.GA↗

Molecular analysis of a high-mass prestellar core candidate in W43-MM1

High-mass analogues of low-mass prestellar cores are searched for to constrain the models of high-mass star formation. Several high-mass cores, at various evolutionary stages, have been recently identified towards the massive star-forming region W43-MM1 and amongst them a high-mass prestellar core candidate. We aim to characterise the chemistry in this high-mass prestellar core candidate, referred to as W43-MM1 core #6, and its environment. Using ALMA high-spatial resolution data of W43-MM1, we have studied the molecular content of core #6 and a neighbouring high-mass protostellar core, referred to as #3, which is similar in size and mass to core #6. We first subtracted the continuum emission using a method based on the density distribution of the intensities on each pixel. Then, from the distribution of detected molecules, we identified the molecules centred on the prestellar core candidate (core #6) and those associated to shocks related to outflows and filament formation. Then we constrained the column densities and temperatures of the molecules detected towards the two cores. While core #3 appears to contain a hot core with a temperature of about 190 K, core #6 seems to have a lower temperature in the range from 20 K to 90 K from a rotational diagram analysis. We have considered different source sizes for core #6 and the comparison of the abundances of the detected molecules towards the core with various interstellar sources shows that it is compatible with a core of size 1000 au with $T = 20-90$ K or a core of size 500 au with $T \sim 80$ K. Core #6 of W43-MM1 remains one of the best high-mass prestellar core candidates even if we cannot exclude that it is at the very beginning of the protostellar phase of high-mass star formation.

astro-ph.GA↗

Detection of a high-mass prestellar core candidate in W43-MM1

Aims. To constrain the physical processes that lead to the birth of high-mass stars it is mandatory to study the very first stages of their formation. We search for high-mass analogs of low-mass prestellar cores in W43-MM1. Methods. We conducted a 1.3 mm ALMA mosaic of the complete W43-MM1 cloud, which has revealed numerous cores with ~ 2000 au FWHM sizes. We investigated the nature of cores located at the tip of the main filament, where the clustering is minimum. We used the continuum emission to measure the core masses and the $^{13}$CS(5-4) line emission to estimate their turbulence level. We also investigated the prestellar or protostellar nature of these cores by searching for outflow signatures traced by CO(2-1) and SiO(5-4) line emission, and for molecular complexity typical of embedded hot cores. Results. Two high-mass cores of ~ 1300 au diameter and ~ $60~M_\odot$ mass are observed to be turbulent but gravitationally bound. One drives outflows and is associated with a hot core. The other core, W43-MM1\#6, does not yet reveal any star formation activity and thus is an excellent high-mass prestellar core candidate.

astro-ph.GA↗

Water and interstellar complex organics associated with the HH 212 protostellar disc - On disc atmospheres, disc winds, and accretion shocks

The HH 212 protostellar system, in Orion B, has been mapped thanks to ALMA-Band 7 Cycle 1 and Cycle 4 observations of dueterated water (HDO) and acetaldehyde (CH$_3$CHO) emission with an angular resolution down to $\sim$0.15 arcsec (60 au). Many emission lines due to 14 CH$_3$CHO and 1 HDO transitions at high excitation ($E_{\rm u}$ between 163 K and 335 K) have been imaged in the inner $\sim$ 70 au region. The local thermal equilibrium analysis of the CH$_3$CHO emission leads to a temperature of 78$\pm$14 K and a column density of 7.6$\pm$3.2 $\times$ 10$^{15}$ cm$^{-2}$, which, when $N_{\rm H_2}$ of 10$^{24}$ cm$^{-2}$ is assumed, leads to an abundance of $X_{\rm CH_3CHO}$ $\simeq$ 8 $\times$ 10$^{-9}$. The large velocity gradient analysis of the HDO emission also places severe constraints on the volume density, n$_{\rm H_2}$ $\geq$ 10$^8$ cm$^{-3}$. The line profiles are 5--7 km s$^{-1}$ wide, and CH$_3$CHO and HDO both show a $\pm$ 2 km s$^{-1}$ velocity gradient over a size of $\sim$ 70 au (blue-shifted emission towards the north-west and red-shifted emission towards the south-east) along the disc equatorial plane, in agreement with what was found so far using other molecular tracers. The kinematics of CH$_3$CHO and HDO are consistent with the occurrence of a centrifugal barrier, that is, the infalling envelope-rotating disc ring, which is chemically enriched through low-velocity accretion shocks. The emission radius is $\sim$ 60 au, in good agreement with what was found before for another interstellar complex organic molecule such as NH$_2$CHO. We support a vertical structure for the centrifugal barrier, suggesting the occurrence of two outflowing, expanding, and rotating rings above and below (of about 40-45 au) the optically thick equatorial disc plane. It is tempting to speculate that these rings could probe the basis of a wind launched from this region.

astro-ph.SR↗

Anatomy of the massive star-forming region S106: The OI 63 micron line observed with GREAT/SOFIA as a versatile diagnostic tool for the evolution of massive stars

The central area (40"x40") of the bipolar nebula S106 was mapped in the OI line at 63.2 micron with high angular (6") and spectral resolution, using GREAT on board SOFIA. The OI emission distribution is compared to the CO 16-15, CII 158 micron, and CO 11-10 lines, mm-molecular lines, and continuum. It is composed of several velocity components in the range from -30 km/s to 25 km/s. The high-velocity blue- and redshifted emission can be explained as arising from accelerated photodissociated (PDR) gas associated with a dark lane close to the massive binary system S106 IR, and from shocks caused by the stellar wind and/or a disk--envelope interaction. At velocities from -9 to -4 km/s and 0.5 to 8 km/s line wings are observed that we attribute to cooling in PDRs created by the ionizing radiation impinging on the cavity walls. The bulk velocity range is dominated by PDR emission from the clumpy molecular cloud. Modelling the emission in the different velocity ranges with the KOSMA-tau code constrains a radiation field chi of a few times 10^4 and densities n of a few times 10^4 cm^-3. Considering self-absorption of the OI line results in higher densities (up to 10^6 cm^-3) only for the gas component seen at high blue- and red velocities. The dark lane has a mass of 275 Msun and shows a velocity difference of 1.4 km/s along its projected length of 1 pc, determined from H13CO+ 1-0 mapping. It can be interpreted as a massive accretion flow, or the remains of it, linked to S106 IR/FIR. The most likely explanation is that the binary system is at a stage of its evolution where gas accretion is counteracted by the stellar winds and radiation, leading to the very complex observed spatial and kinematic emission distribution of the various tracers.

astro-ph.GA↗