arXiv subjects

A. Ishii

Publications and source records attributed to A. Ishii.

At least 19 recordsLinked to original sources

arXiv2023

Full-Stack End-To-End mmWave Simulations Using 3GPP and NYUSIM Channel Model in ns-3

Accurate channel modeling and simulation tools are vital for studying sub-THz and millimeter (mmWave) wideband communication system performance. To accurately design future high data rate, low latency wireless modems, the entire protocol stack must be appropriately modeled to understand how the physical layer impacts the end-to-end performance experienced by the end user. This paper presents a full stack end-to-end performance analysis in ns-3 using drop-based NYU channel model (NYUSIM) and 3GPP statistical channel model (SCM) in scenarios, namely urban microcell (UMi), urban macrocell (UMa), rural macrocell (RMa), and indoor hotspot (InH) at 28 GHz with 100 MHz bandwidth. Video data is transmitted at 50 Mbps using User Datagram Protocol (UDP), and we observe that the RMa channel is benign in non-line of sight (NLOS) for NYUSIM and 3GPP SCM as it exhibits no packet drops and yields maximum throughput (48.1 Mbps) and latency of $\sim$ 20 ms. In NLOS, for NYUSIM, the UMa and RMa channels are similar in terms of throughput and packet drops, and the latency in UMi and InH scenarios is 10 times and 25 times higher respectively compared to UMa. Our results indicate that mmWave bands can support data rates of 50 Mbps with negligible packet drops and latency below 150 ms in all scenarios using NYUSIM.

cs.IT↗

arXiv2022

High-power laser experiment forming a supercritical collisionless shock in a magnetized uniform plasma at rest

We present a new experimental method to generate quasi-perpendicular supercritical magnetized collisionless shocks. In our experiment, ambient nitrogen (N) plasma is at rest and well-magnetized, and it has uniform mass density. The plasma is pushed by laser-driven ablation aluminum (Al) plasma. Streaked optical pyrometry and spatially resolved laser collective Thomson scattering clarify structures of plasma density and temperatures, which are compared with one-dimensional particle-in-cell simulations. It is indicated that just after the laser irradiation, the Al plasma is magnetized by a self-generated Biermann battery field, and the plasma slaps the incident N plasma. The compressed external field in the N plasma reflects N ions, leading to counter-streaming magnetized N flows. Namely we identify the edge of the reflected N ions. Such interacting plasmas form a magnetized collisionless shock.

physics.plasm-ph↗

arXiv2021

Formation of Organic Color Centers in Air-Suspended Carbon Nanotubes Using Vapor-Phase Reaction

Organic color centers in single-walled carbon nanotubes have demonstrated exceptional ability to generate single photons at room temperature in the telecom range. Combining the color centers with pristine air-suspended tubes would be desirable for improved performance, but all current synthetic methods occur in solution which makes them incompatible. Here we demonstrate formation of color centers in air-suspended nanotubes using vapor-phase reaction. Functionalization is directly verified on the same nanotubes by photoluminescence spectroscopy, with unambiguous statistics from more than a few thousand individual nanotubes. The color centers show a strong diameter-dependent emission intensity, which can be explained with a theoretical model for chemical reactivity taking into account strain along the tube curvature. We are also able to estimate the defect density by comparing the experiments with simulations based on a one-dimensional diffusion equation, whereas the analysis of diameter dependent peak energies gives insight to the nature of the dopant states. Time-resolved measurements show a longer lifetime for color center emission compared to E$_{11}$ exciton states. Our results highlight the influence of the tube structure on vapor-phase reactivity and emission properties, providing guidelines for development of high-performance near-infrared quantum light sources.

cond-mat.mtrl-sci↗

arXiv2021

Near-unity radiative quantum efficiency of excitons in carbon nanotubes

The efficiencies of photonic devices are primarily governed by radiative quantum efficiency, which is a property given by the light emitting material. Quantitative characterization for carbon nanotubes, however, has been difficult despite being a prominent material for nanoscale photonics. Here we determine the radiative quantum efficiency of bright excitons in carbon nanotubes by modifying the exciton dynamics through cavity quantum electrodynamical effects. Silicon photonic crystal nanobeam cavities are used to induce the Purcell effect on individual carbon nanotubes. Spectral and temporal behavior of the cavity enhancement is characterized by photoluminescence microscopy, and the fraction of the radiative decay process is evaluated. We find that the radiative quantum efficiency is near unity for bright excitons in carbon nanotubes at room temperature.

cond-mat.mes-hall↗

arXiv2021

Waveguide coupled cavity-enhanced light emission from individual carbon nanotubes

We demonstrate an individual single-walled carbon nanotube light emitter integrated onto a microcavity and a waveguide operating in the telecom wavelength regime. Light emission from the carbon nanotube is enhanced at the cavity resonance and is efficiently extracted from the waveguide facet. We have transferred carbon nanotubes to a nanobeam cavity with a dry process, ensuring that an individual carbon nanotube is used. The guided light emission from a chirality-identified single carbon nanotube has a narrow linewidth of less than 1.3 nm and an off-resonance rejection of $\sim$17 dB. The waveguide-coupled device configuration is compatible with fully integrated on-chip designs and is promising for carbon-nanotube-based photonics.

physics.optics↗

arXiv2020

Hexagonal boron nitride as an ideal substrate for carbon nanotube photonics

Hexagonal boron nitride is widely used as a substrate for two-dimensional materials in both electronic and photonic devices. Here, we demonstrate that two-dimensional hexagonal boron nitride is also an ideal substrate for one-dimensional single-walled carbon nanotubes. Nanotubes directly attached to hexagonal boron nitride show bright photoluminescence with narrow linewidth at room temperature, comparable to air-suspended nanotubes. Using photoluminescence excitation spectroscopy, we unambiguously assign the chiralities of nanotubes on boron nitride by tracking individual tubes before and after contact with boron nitride. Although hexagonal boron nitride has a low dielectric constant and is attached to only one side of the nanotubes, we observe that optical transition energies are redshifted as much as ~50 meV from the air-suspended nanotubes. We also perform statistical measurements on more than 400 tubes, and the redshifts are found to be dependent on tube diameter. This work opens up new possibilities for all-solid-state carbon nanotube photonic devices by utilizing hexagonal boron nitride substrates.

cond-mat.mes-hall↗

arXiv2019

High efficiency dark-to-bright exciton conversion in carbon nanotubes

We report that dark excitons can have a large contribution to the emission intensity in carbon nanotubes due to an efficient exciton conversion from a dark state to a bright state. Time-resolved photoluminescence measurements are used to investigate decay dynamics and diffusion properties of excitons, and we obtain intrinsic lifetimes and diffusion lengths of bright excitons as well as diffusion coefficients for both bright and dark excitons. We find that the dark-to-bright transition rates can be considerably high, and that more than half of the dark excitons can be transformed into the bright excitons. The state transition rates have a large chirality dependence with a family pattern, and the conversion efficiency is found to be significantly enhanced by adsorbed air molecules on the surface of the nanotubes. Our findings show the nontrivial significance of the dark excitons on the emission kinetics in low dimensional materials, and demonstrate the potential for engineering the dark-to-bright conversion process by using surface interactions.

cond-mat.mes-hall↗

arXiv2019

Super-Resolution Fluorescence Imaging of Carbon Nanotubes Using a Nonlinear Excitonic Process

Highly efficient exciton-exciton annihilation process unique to one-dimensional systems is utilized for super-resolution imaging of air-suspended carbon nanotubes. Through the comparison of fluorescence signals in linear and sublinear regimes at different excitation powers, we extract the efficiency of the annihilation processes using conventional confocal microscopy. Spatial images of the annihilation rate of the excitons have resolution beyond the diffraction limit. We investigate excitation power dependence of the annihilation processes by experiment and Monte Carlo simulation, and the resolution improvement of the annihilation images can be quantitatively explained by the superlinearity of the annihilation process. We have also developed another method in which the cubic dependence of the annihilation rate on exciton density is utilized to achieve further sharpening of single nanotube images.

cond-mat.mes-hall↗

arXiv2018

Organic molecular tuning of many-body interaction energies in air-suspended carbon nanotubes

We investigate adsorption effects of copper phthalocyanine molecules on excitons and trions in air-suspended carbon nanotubes. Using photoluminescence excitation spectroscopy, we observe that exciton energy redshifts gradually with the molecular deposition thickness. The trion emission is also observed at large deposition amounts, which indicates charge transfer between the phthalocyanine molecules and carbon nanotubes. Analysis of the spectra for individual tubes reveal a correlation between the exciton-trion energy separation and the exciton emission energy, showing that the many-body interaction energies scale similarly with the molecular dielectric screening.

cond-mat.mes-hall↗

arXiv2018

Enhanced single photon emission from carbon nanotube dopant states coupled to silicon microcavities

Single-walled carbon nanotubes are a promising material as quantum light sources at room temperature and as nanoscale light sources for integrated photonic circuits on silicon. Here we show that integration of dopant states in carbon nanotubes and silicon microcavities can provide bright and high-purity single photon emitters on silicon photonics platform at room temperature. We perform photoluminescence spectroscopy and observe enhancement of emission from the dopant states by a factor of $\sim$100, and cavity-enhanced radiative decay is confirmed using time-resolved measurements, where $\sim$30% decrease of emission lifetime is observed. Statistics of photons emitted from the cavity-coupled dopant states are investigated by photon correlation measurements, and high-purity single photon generation is observed. Excitation power dependence of photon emission statistics shows that the degree of photon antibunching can be kept low even when the excitation power increases, while single photon emission rate can be increased up to $\sim 1.7 \times 10^7$ Hz.

cond-mat.mes-hall↗

arXiv2017

Spectral tuning of optical coupling between air-mode nanobeam cavities and individual carbon nanotubes

We demonstrate control over optical coupling between air-suspended carbon nanotubes and air-mode nanobeam cavities by spectral tuning. Taking advantage of the large dielectric screening effects caused by adsorbed molecules, laser heating is used to blueshift the nanotube photoluminescence. Significant increase of the cavity peak is observed when the nanotube emission is brought into resonance, and the spontaneous emission enhancement is estimated from the photoluminescence spectra. We find that the enhancement shows good correlation to the spectral overlap of the nanotube emission and the cavity peak. Our technique offers a convenient method for controlling the optical coupling of air-suspended nanotubes to photonic structures.

cond-mat.mes-hall↗

arXiv2017

Single carbon nanotubes as ultrasmall all-optical memories

Performance improvements are expected from integration of photonic devices into information processing systems, and in particular, all-optical memories provide a key functionality. Scaling down the size of memory elements is desirable for high-density integration, and the use of nanomaterials would allow for devices that are significantly smaller than the operation wavelengths. Here we report on all-optical memory based on individual carbon nanotubes, where adsorbed molecules give rise to optical bistability. By exciting at the high-energy tail of the excitonic absorption resonance, nanotubes can be switched between the desorbed state and the adsorbed state. We demonstrate reversible and reproducible operation of the nanotube optical memory, and determine the rewriting speed by measuring the molecular adsorption and desorption times. Our results underscore the impact of molecular-scale effects on optical properties of nanomaterials, offering new design strategies for photonic devices that are a few orders of magnitude smaller than the optical diffraction limit.

cond-mat.mes-hall↗

arXiv2017

Room-temperature single photon emission from micron-long air-suspended carbon nanotubes

Statistics of photons emitted by mobile excitons in individual carbon nanotubes are investigated. Photoluminescence spectroscopy is used to identify the chiralities and suspended lengths of air-suspended nanotubes, and photon correlation measurements are performed at room temperature on telecommunication-wavelength nanotube emission with a Hanbury-Brown-Twiss setup. We obtain zero-delay second-order correlation $g^{(2)}(0)$ less than 0.5, indicating single photon generation. Excitation power dependence of the photon antibunching characteristics is examined for nanotubes with various chiralities and suspended lengths, where we find that the minimum value of $g^{(2)}(0)$ is obtained at the lowest power. The influence of exciton diffusion and end quenching is studied by Monte Carlo simulations, and we derive an analytical expression for the minimum value of $g^{(2)}(0)$. Our results indicate that mobile excitons in micron-long nanotubes can in principle produce high-purity single photons, leading to new design strategies for quantum photon sources.

cond-mat.mes-hall↗

arXiv2017

Cold exciton electroluminescence from air-suspended carbon nanotube split-gate devices

Electroluminescence from individual carbon nanotubes within split-gate devices is investigated. By characterizing the air-suspended nanotubes with photoluminescence spectroscopy, chirality is identified and electroluminescence peaks are assigned. We observe electroluminescence linewidth comparable to photoluminescence, indicating negligible heating and state-mixing effects. Split-gate and bias voltage dependences are consistent with emission from an electrostatically formed $pn$-junction.

cond-mat.mes-hall↗

arXiv2015

Thermal and electromagnetic properties of Bi$_2$Sr$_2$CaCu$_2$O$_8$ intrinsic Josephson junction stacks studied via one-dimensional coupled sine-Gordon equations

We used one-dimensional coupled sine-Gordon equations combined with heat diffusion equations to numerically investigate the thermal and electromagnetic properties of a $300\,μ\mathrm{m}$ long intrinsic Josephson junction stack consisting of $N = 700$ junctions. The junctions in the stack are combined to $M$ segments where we assume that inside a segment all junctions behave identically. Most simulations are for $M = 20$. For not too high bath temperatures there is the appearence of a hot spot at high bias currents. In terms of electromagnetic properties, robust standing wave patterns appear in the current density and electric field distributions. These patterns come together with vortex/antivortex lines across the stack that correspond to $π$ kink states, discussed before in the literature for a homogeneous temperature distribution in the stack. We also discuss scaling of the thermal and electromagnetic properties with $M$, on the basis of simulations with $M$ between 10 and 350.

cond-mat.supr-con↗

arXiv2014

Exciton diffusion, end quenching, and exciton-exciton annihilation in individual air-suspended carbon nanotubes

Luminescence properties of carbon nanotubes are strongly affected by exciton diffusion, which plays an important role in various nonradiative decay processes. Here we perform photoluminescence microscopy on hundreds of individual air-suspended carbon nanotubes to elucidate the interplay between exciton diffusion, end quenching, and exciton-exciton annihilation processes. A model derived from random-walk theory as well as Monte Carlo simulations are utilized to analyze nanotube length dependence and excitation power dependence of emission intensity. We have obtained the values of exciton diffusion length and absorption cross section for different chiralities, and diameter-dependent photoluminescence quantum yield have been observed. The simulations have also revealed the nature of a one-dimensional coalescence process, and an analytical expression for the power dependence of emission intensity is given.

cond-mat.mes-hall↗

arXiv2014

Gate-controlled generation of optical pulse trains using individual carbon nanotubes

We report on optical pulse-train generation from individual air-suspended carbon nanotubes under an application of square-wave gate voltages. Electrostatically-induced carrier accummulation quenches photoluminescence, while a voltage sign reversal purges those carriers, resetting the nanotubes to become luminescent temporarily. Frequency domain measurements reveal photoluminescence recovery with characteristic frequencies that increase with excitation laser power, showing that photoexcited carriers quench the emission in a self-limiting manner. Time-resolved measurements directly confirm the presence of an optical pulse train sychronized to the gate voltage signal, and flexible control over pulse timing and duration is demonstrated.

cond-mat.mes-hall↗

arXiv2014

Ultralow mode-volume photonic crystal nanobeam cavities for high efficiency coupling to individual carbon nanotube emitters

We report on high efficency coupling of individual air-suspended carbon nanotubes to silicon photonic crystal nanobeam cavities. Photoluminescence images of dielectric- and air-mode cavities reflect their distinctly different mode profiles and show that fields in the air are important for coupling. We find that the air-mode cavities couple more efficiently, and estimated spontaneous emission coupling factors reach a value as high as 0.85. Our results demonstrate advantages of ultralow mode-volumes in air-mode cavities for coupling to low-dimensional nanoscale emitters.

cond-mat.mes-hall↗