arXiv subjects

A. J. Eldorado Riggs

Publications and source records attributed to A. J. Eldorado Riggs.

15 recordsLinked to original sources

arXiv2025

Flight masks of the Roman Space Telescope Coronagraph Instrument

Over the past two decades, thousands of confirmed exoplanets have been detected. The next major challenge is to characterize these other worlds and their stellar systems. Much information on the composition and formation of exoplanets and circumstellar debris disks can only be achieved via direct imaging. Direct imaging is challenging because of the small angular separations (< 1 arcsec) and high star-to-planet flux ratios such as ~1e9 for a Jupiter analog or ~1e10 for an Earth analog in the visible. Atmospheric turbulence prohibits reaching such high flux ratios on the ground, so observations must be made above the Earth's atmosphere. The Nancy Grace Roman Space Telescope (Roman), planned to launch in late 2026, will be the first space-based observatory to demonstrate high-contrast imaging with active wavefront control using its Coronagraph Instrument. The instrument's main purpose is to mature the various technologies needed for a future flagship mission to image and characterize Earth-like exoplanets. These technologies include two high-actuator-count deformable mirrors, photon-counting detectors, two complementary wavefront sensing and control loops, and two different coronagraph types. In this paper, we describe the complete set of flight masks in the Roman Coronagraph Instrument, their intended combinations, and how they were laid out, fabricated, and measured.

astro-ph.IM↗

arXiv2024

Comparative laboratory study of electric field conjugation algorithms

Future space telescope coronagraph instruments hinge on the integration of high-performance masks and precise wavefront sensing and control techniques to create dark holes essential for exoplanet detection. Recent advancements in wavefront control algorithms might exhibit differing performance depending on the coronagraph used. This research investigates three model-free and model-based algorithms in conjunction with either a vector vortex coronagraph or a scalar vortex coronagraph under identical laboratory conditions: pairwise probing with electric field conjugation, the self-coherent camera with electric field conjugation, and implicit electric field conjugation. We present experimental results in narrowband and broadband light from the In-Air Coronagraph Testbed at the Jet Propulsion Laboratory. We find that model-free dark hole digging methods achieve comparable broadband contrasts to model-based methods, and highlight the calibration costs of model-free methods compared to model-based approaches. This study also reports the first time that electric field conjugation with the self-coherent camera has been applied for simultaneous multi-subband correction with a field stop. This study compares the advantages and disadvantages of each of these wavefront sensing and control algorithms with respect to their potential for future space telescopes.

astro-ph.IM↗

arXiv2024

Black Silicon BRDF and Polarization for Coronagraphic Pupil Masks

Future space observatories will likely have segmented primaries, causing diffraction effects that reduce coronagraph performance. Reflective binary pupil apodizer masks can mitigate these, with the metamaterial black silicon (BSi) showing promise as a strong absorber. To bring contrast ratios to the $10^-{10}$ level as needed to observe Earth-like exoplanets, feature sizes on these BSi masks will need to be less than $5$ microns when paired with MEMS (micro-electromechanical systems) deformable mirrors. As scalar diffraction cannot reliably model this feature size, we developed a Finite-Difference Time-Domain (FDTD) model of BSi masks using Meep software. We characterize the FDTD-derived polarization-dependent bidirectional reflectance distribution function of BSi and discuss the model's shortcomings.

astro-ph.IM↗

arXiv2024

Current laboratory performance of starlight suppression systems, and potential pathways to desired Habitable Worlds Observatory exoplanet science capabilities

We summarize the current best polychromatic (10 to 20 % bandwidth) contrast performance demonstrated in the laboratory by different starlight suppression approaches and systems designed to directly characterize exoplanets around nearby stars. We present results obtained by internal coronagraph and external starshade experimental testbeds using entrance apertures equivalent to off-axis or on-axis telescopes, either monolithic or segmented. For a given angular separation and spectral bandwidth, the performance of each starlight suppression system is characterized by the values of raw contrast (before image processing), off-axis (exoplanet) core throughput, and post-calibration contrast (the final 1 sigma detection limit of off-axis point sources, after image processing). To place the current laboratory results in the perspective of the future Habitable Worlds Observatory (HWO) mission, we simulate visible observations of a fiducial Earth/Sun twin system at 12 pc, assuming a 6m (inscribed diameter) collecting aperture and a realistic end-to-end optical throughput. The exposure times required for broadband exoearth detection (20% bandwidth around a wavelength of 0.55 microns) and visible spectroscopic observations (R=70) are then computed assuming various levels of starlight suppression performance, including the values currently demonstrated in the laboratory. Using spectroscopic exposure time as a simple metric, our results point to key starlight suppression system design performance improvements and trades to be conducted in support of HWO exoplanet science capabilities. These trades may be explored via numerical studies, lab experiments, as well as high contrast space-based observations and demonstrations.

astro-ph.IM↗

arXiv2024

A Generalized Expression for Accelerating Beamlet Decomposition Simulations

Paraxial diffraction modeling based on the Fourier transform has seen widespread implementation for simulating the response of a diffraction-limited optical system. For systems where the paraxial assumption is not sufficient, a class of algorithms has been developed that employs hybrid propagation physics to compute the propagation of an elementary beamlet along geometric ray paths. These "beamlet decomposition" algorithms include the well-known Gaussian Beamlet Decomposition (GBD) algorithm, of which several variants have been created. To increase the computational efficiency of the GBD algorithm, we derive an alternative expression of the technique that utilizes the analytical propagation of beamlets to tilted planes. We then use this accelerated algorithm to conduct a parameter-space search to find the optimal combination of free parameters in GBD to construct the analytical Airy function. The experiment is conducted on a consumer-grade CPU, and a high-performance GPU, where the new algorithm is 34 times faster than the previously published algorithm on CPUs, and 67,513 times faster on GPUs.

physics.optics↗

arXiv2024

Laboratory demonstration of the wrapped staircase scalar vortex coronagraph

Of the over 5000 exoplanets that have been detected, only about a dozen have ever been directly imaged. Earth-like exoplanets are on the order of 10 billion times fainter than their host star in visible and near-infrared, requiring a coronagraph instrument to block primary starlight and allow for the imaging of nearby orbiting planets. In the pursuit of direct imaging of exoplanets, scalar vortex coronagraphs (SVCs) are an attractive alternative to vector vortex coronagraphs (VVCs). VVCs have demonstrated 2e-9 raw contrast in broadband light but have several limitations due to their polarization properties. SVCs imprint the same phase ramp as VVCs on the incoming light and do not require polarization splitting, but they are inherently chromatic. Discretized phase ramp patterns such as a wrapped staircase help reduce SVC chromaticity and simulations show it outperforms a chromatic classical vortex in broadband light. We designed, fabricated, and tested a wrapped staircase SVC, and here we present the broadband characterization on the high contrast spectroscopy testbed. We also performed wavefront correction on the in-air coronagraph testbed at NASA's Jet Propulsion Laboratory and achieved an average raw contrasts of 3.2e-8 in monochromatic light and 2.2e-7 across a 10% bandwidth.

astro-ph.IM↗

arXiv2023

End-to-end numerical modeling of the Roman Space Telescope coronagraph

The Roman Space Telescope will have the first advanced coronagraph in space, with deformable mirrors for wavefront control, low-order wavefront sensing and maintenance, and a photon-counting detector. It is expected to be able to detect and characterize mature, giant exoplanets in reflected visible light. Over the past decade the performance of the coronagraph in its flight environment has been simulated with increasingly detailed diffraction and structural/thermal finite element modeling. With the instrument now being integrated in preparation for launch within the next few years, the present state of the end-to-end modeling is described, including the measured flight components such as deformable mirrors. The coronagraphic modes are thoroughly described, including characteristics most readily derived from modeling. The methods for diffraction propagation, wavefront control, and structural and thermal finite-element modeling are detailed. The techniques and procedures developed for the instrument will serve as a foundation for future coronagraphic missions such as the Habitable Worlds Observatory.

astro-ph.IM↗

arXiv2022

Topological Designs for Scalar Vortex Coronagraphs

The detection and characterization of Earth-like exoplanets around Sun-like stars for future flagship missions requires coronagraphs to achieve contrasts on the order of 1e-10 at close angular separations and over large spectral bandwidths (>=20%). We present our progress thus far on exploring the potential for scalar vortex coronagraphs (SVCs) in direct exoplanet imaging. SVCs are an attractive alternative to vector vortex coronagraphs (VVCs), which have recently demonstrated 6e-9 raw contrast in 20% broadband light but are polarization dependent. SVCs imprint the same phase ramp on the incoming light and do not require polarization splitting, but are inherently limited by their chromatic behavior. Several SVC designs have been proposed in recent years to solve this issue by modulating or wrapping the azimuthal phase function according to specific patterns. For one such design, the staircase SVC, we present our best experimental SVC results demonstrating raw contrast of 2e-7 in 10% broadband light. Since SVC broadband performance and aberration sensitivities are highly dependent on topology, we conducted a comparative study of several SVC designs to optimize for high contrast across a range of bandwidths. Furthermore, we present a new coronagraph optimization tool to predict performance in order to find an achromatic solution.

astro-ph.IM↗

arXiv2021

LUVOIR-ECLIPS closed-loop adaptive optics performance and contrast predictions

One of the primary science goals of the Large UV/Optical/Infrared Surveyor (LUVOIR) mission concept is to detect and characterize Earth-like exoplanets orbiting nearby stars with direct imaging. The success of its coronagraph instrument ECLIPS (Extreme Coronagraph for Living Planetary Systems) depends on the ability to stabilize the wavefront from a large segmented mirror such that optical path differences are limited to tens of picometers RMS during an exposure time of a few hours. In order to relax the constraints on the mechanical stability, ECLIPS will be equipped with a wavefront sensing and control (WS&C) architecture to correct wavefront errors up to temporal frequencies >~1 Hz. These errors may be dominated by spacecraft structural dynamics exciting vibrations at the segmented primary mirror. In this work, we present detailed simulations of the WS&C system within the ECLIPS instrument and the resulting contrast performance. This study assumes wavefront aberrations based on a finite element model of a simulated telescope with spacecraft structural dynamics. Wavefront residuals are then computed according to a model of the adaptive optics system that includes numerical propagation to simulate a realistic wavefront sensor and an analytical model of the temporal performance. An end-to-end numerical propagation model of ECLIPS is then used to estimate the residual starlight intensity distribution at the science detector. We show that the contrast performance depends strongly on the target star magnitude and the spatio-temporal distribution of wavefront errors from the telescope. In cases with significant vibration, we advocate for the use of laser metrology to mitigate high temporal frequency wavefront errors and increase the mission yield.

astro-ph.IM↗

arXiv2020

A review of simulation and performance modeling for the Roman coronagraph instrument

The Nancy Grace Roman Space Telescope Coronagraph Instrument (CGI) will be capable of characterizing exoplanets in reflected light and will demonstrate space technologies essential for future missions to take spectra of Earthlike exoplanets. As the mission and instrument move into the final stages of design, simulation tools spanning from depth of search calculators to detailed diffraction models have been created by a variety of teams. We summarize these efforts, with a particular focus on publicly available datasets and software tools. These include speckle and point-spread-function models, signal-to-noise calculators, and science product simulations (e.g. predicted observations of debris disks and exoplanet spectra). This review is intended to serve as a reference to facilitate engagement with the technical and science capabilities of the CGI instrument.

astro-ph.EP↗

arXiv2020

Design, pointing control, and on-sky performance of the mid-infrared vortex coronagraph for the VLT/NEAR experiment

Vortex coronagraphs have been shown to be a promising avenue for high-contrast imaging in the close-in environment of stars at thermal infrared (IR) wavelengths. They are included in the baseline design of METIS. To ensure good performance of these coronagraphs, a precise control of the centering of the star image in real time is needed. We previously developed and validated the quadrant analysis of coronagraphic images for tip-tilt sensing estimator (QACITS) pointing estimator to address this issue. While this approach is not wavelength-dependent in theory, it was never implemented for mid-IR observations, which leads to specific challenges and limitations. Here, we present the design of the mid-IR vortex coronagraph for the new Earths in the $α$ Cen Region (NEAR) experiment with the VLT/VISIR instrument and assess the performance of the QACITS estimator for the centering control of the star image onto the vortex coronagraph. We use simulated data and on-sky data obtained with VLT/VISIR, which was recently upgraded for observations assisted by adaptive optics in the context of the NEAR experiment. We demonstrate that the QACITS-based correction loop is able to control the centering of the star image onto the NEAR vortex coronagraph with a stability down to $0.015 λ/D$ rms over 4h in good conditions. These results show that QACITS is a robust approach for precisely controlling in real time the centering of vortex coronagraphs for mid-IR observations.

astro-ph.IM↗

arXiv2020

Microelectromechanical deformable mirror development for high-contrast imaging, part 1: miniaturized, flight-capable control electronics

Deformable mirrors (DMs) are a critical technology to enable coronagraphic direct imaging of exoplanets with current and planned ground - and space-based telescopes as well as future mission concepts that aim to image exoplanet types ranging from gas giants to Earth analogs. This places several requirements on the DMs such as requires a large actuator count (>3000), fine surface height resolution (<10 pm), and radiation hardened driving electronics with low mass and volume. We present the design and testing of a flight-capable, miniaturized DM controller. Having achieved contrasts on the order of 5x10-9 on a coronagraph testbed in vacuum in the high contrast imaging testbed facility at NASA's Jet Propulsion Laboratory (JPL), we demonstrate that the electronics are capable of meeting the requirements of future coronagraph-equipped space telescopes. We also report on functionality testing onboard the high-altitude balloon experiment "Planetary Imaging Concept Testbed Using a Recoverable Experiment Coronagraph," which aims to directly image debris disks and exozodiacal dust around nearby stars. The controller is designed for the Boston Micromachines Corporation Kilo-DM and is readily scalable to larger DM formats. The three main components of the system (the DM, driving electronics, and mechanical and heat management) are designed to be compact and have low-power consumption to enable its use not only on exoplanet missions, but also in a wide-range of applications that require precision optical systems, such as direct line-of-sight laser communications. The controller is capable of handling 1024 actuators with 220 V maximum dynamic range, 16-bit resolution, 14-bit accuracy, and 1 kHz operating frequency. The system fits in a 10 x 10 x 5 cm3 volume, weighs <0.5 kg, and consumes <8 W. We have developed a turnkey solution reducing the risk for future missions.

astro-ph.IM↗

arXiv2020

The Habitable Exoplanet Observatory (HabEx) Mission Concept Study Final Report

The Habitable Exoplanet Observatory, or HabEx, has been designed to be the Great Observatory of the 2030s. For the first time in human history, technologies have matured sufficiently to enable an affordable space-based telescope mission capable of discovering and characterizing Earthlike planets orbiting nearby bright sunlike stars in order to search for signs of habitability and biosignatures. Such a mission can also be equipped with instrumentation that will enable broad and exciting general astrophysics and planetary science not possible from current or planned facilities. HabEx is a space telescope with unique imaging and multi-object spectroscopic capabilities at wavelengths ranging from ultraviolet (UV) to near-IR. These capabilities allow for a broad suite of compelling science that cuts across the entire NASA astrophysics portfolio. HabEx has three primary science goals: (1) Seek out nearby worlds and explore their habitability; (2) Map out nearby planetary systems and understand the diversity of the worlds they contain; (3) Enable new explorations of astrophysical systems from our own solar system to external galaxies by extending our reach in the UV through near-IR. This Great Observatory science will be selected through a competed GO program, and will account for about 50% of the HabEx primary mission. The preferred HabEx architecture is a 4m, monolithic, off-axis telescope that is diffraction-limited at 0.4 microns and is in an L2 orbit. HabEx employs two starlight suppression systems: a coronagraph and a starshade, each with their own dedicated instrument.

astro-ph.IM↗

arXiv2019

High-contrast imager for complex aperture telescopes (HiCAT): 5. first results with segmented-aperture coronagraph and wavefront control

Segmented telescopes are a possibility to enable large-aperture space telescopes for the direct imaging and spectroscopy of habitable worlds. However, the complexity of their aperture geometry, due to the central obstruction, support structures and segment gaps, makes high-contrast imaging challenging. The High-contrast Imager for Complex Aperture Telescopes (HiCAT) testbed was designed to study and develop solutions for such telescope pupils using wavefront control and coronagraphic starlight suppression. The testbed design has the flexibility to enable studies with increasing complexity for telescope aperture geometries: off-axis telescopes, on-axis telescopes with central obstruction and support structures - e.g. the Wide Field Infrared Survey Telescope (WFIRST) - to on-axis segmented telescopes, including various concepts for a Large UV, Optical, IR telescope (LUVOIR). In the past year, HiCAT has made significant hardware and software updates to accelerate the development of the project. In addition to completely overhauling the software that runs the testbed, we have completed several hardware upgrades, including the second and third deformable mirror, and the first custom Apodized Pupil Lyot Coronagraph (APLC) optimized for the HiCAT aperture, which is similar to one of the possible geometries considered for LUVOIR. The testbed also includes several external metrology features for rapid replacement of parts, and in particular the ability to test multiple apodizers readily, an active tip-tilt control system to compensate for local vibration and air turbulence in the enclosure. On the software and operations side, the software infrastructure enables 24/7 automated experiments that include routine calibration tasks and high-contrast experiments. We present an overview and status update of the project, on the hardware and software side, and describe results obtained with APLC WFC.

astro-ph.IM↗

arXiv2015

Demonstration of high contrast with an obscured aperture with the WFIRST-AFTA shaped pupil coronagraph

The coronagraph instrument on the WFIRST-AFTA mission study has two coronagraphic architectures, shaped pupil and hybrid Lyot, which may be interchanged for use in different observing scenarios. Each architecture relies on newly-developed mask components to function in the presence of the AFTA aperture, and so both must be matured to a high technology readiness level (TRL) in advance of the mission. A series of milestones were set to track the development of the technologies required for the instrument; in this paper, we report on completion of WFIRST-AFTA Coronagraph Milestone 2---a narrowband $10^{-8}$ contrast test with static aberrations for the shaped pupil---and the plans for the upcoming broadband Coronagraph Milestone 5.

astro-ph.IM↗