arXiv subjects

A. K. Hüttel

Publications and source records attributed to A. K. Hüttel.

At least 19 recordsLinked to original sources

arXiv2024

Material transfer and contact optimization in MoS2 nanotube devices

While the promise of clean and defect-free $\textrm{MoS}_{2}$ nanotubes as quantum electronic devices is obvious, ranging from strong spin-orbit interaction to intrinsic superconductivity, device fabrication still poses considerable challenges. Deterministic transfer of transition metal dichalcogenide nanomaterials and transparent contacts to the nanomaterials are nowadays highly active topics of research, both with fundamental research and applications in mind. Contamination from transport agents as well as surface adsorbates and surface charges play a critical role for device performance. Many techniques have been proposed to address these topics for transition metal dichalcogenides in general. Here, we analyse their usage for the transfer based fabrication of $\textrm{MoS}_{2}$ nanotube devices. Further, we compare different contact materials in order to avoid the formation of a Schottky barrier.

cond-mat.mes-hall↗

arXiv2024

Modulations of the Work Function and Morphology of a Single MoS2 Nanotube by Charge Injection

A current was injected into a single MoS2 nanotube using an atomic-force-microscopy probe. The trapped electrons and holes caused a partial collapse of the nanotube and its helical twisting. The topography changes can be explained by the reverse piezoelectric effect, the theory of which was proposed for chiral nanostructures. Work-function modifications were observed, which were dependent on the polarity of the injected carriers.

cond-mat.mes-hall↗

arXiv2023

Optomechanical coupling and damping of a carbon nanotube quantum dot

Carbon nanotubes are excellent nano-electromechanical systems, combining high resonance frequency, low mass, and large zero-point motion. At cryogenic temperatures they display high mechanical quality factors. Equally they are outstanding single electron devices with well-known quantum levels and have been proposed for the implementation of charge or spin qubits. The integration of these devices into microwave optomechanical circuits is however hindered by a mismatch of scales, between typical microwave wavelengths, nanotube segment lengths, and nanotube deflections. As experimentally demonstrated recently in [Blien et al., Nat. Comm. 11, 1363 (2020)], coupling enhancement via the quantum capacitance allows to circumvent this restriction. Here we extend the discussion of this experiment. We present the subsystems of the device and their interactions in detail. An alternative approach to the optomechanical coupling is presented, allowing to estimate the mechanical zero point motion scale. Further, the mechanical damping is discussed, hinting at hitherto unknown interaction mechanisms.

cond-mat.mes-hall↗

arXiv2023

Stepwise fabrication and optimization of coplanar waveguide resonator hybrid devices

From the background of microwave-optomechanical experiments involving carbon nanotubes, the optimization of superconducting coplanar waveguide resonator devices is discussed. Two devices, one with unmodified geometry compared to previous work and one integrating several improvements, are lithographically built up step by step. After each step, the low temperature GHz transmission properties are retested. This allows to identify the impact of the fabrication and the geometry modification on the device properties. In addition, simplified circuit geometries are modeled numerically, confirming the experimental results and providing further insights for optimization.

physics.app-ph↗

arXiv2023

Non-Destructive Low-Temperature Contacts to MoS2 Nanoribbon and Nanotube Quantum Dots

Molybdenum disulfide nanoribbons and nanotubes are quasi-1D semiconductors with strong spin-orbit interaction, a nanomaterial highly promising for quantum electronic applications. Here, it is demonstrated that a bismuth semimetal layer between the contact metal and this nanomaterial strongly improves the properties of the contacts. Two-point resistances on the order of 100k$Ω$ are observed at room temperature. At cryogenic temperature, Coulomb blockade is visible. The resulting stability diagrams indicate a marked absence of trap states at the contacts and the corresponding disorder, compared to previous devices that use low-work-function metals as contacts. Single-level quantum transport is observed at temperatures below 100mK.

cond-mat.mes-hall↗

arXiv2020

From Transparent Conduction to Coulomb Blockade at Fixed Hole Number

We present a complex set of transport spectroscopy data on a clean single-wall carbon nanotube device in high magnetic fields. At zero axial field, the device displays in hole conduction with increasingly negative gate voltage a fast transition towards high contact transparency and eventually Fabry-Perot interference of conductance. When increasing the axial field component up to B=17T, the contact transparency and the overall conductance are reduced all the way to Coulomb blockade, clearly displaying the subsequent charging with the first 10 holes. The continuous transition between the transport regimes is dominated by a rich spectrum of Kondo-like resonances, with distinct features in the stability diagrams.

cond-mat.mes-hall↗

arXiv2020

Magnetic field control of the Franck-Condon coupling of few-electron quantum states

Suspended carbon nanotubes display at cryogenic temperatures a distinct interaction between the quantized longitudinal vibration of the macromolecule and its embedded quantum dot, visible via Franck-Condon conductance side bands in transport spectroscopy. We present data on such side bands at known absolute number N=1 and N=2 of conduction band electrons and consequently well-defined electronic ground and excited states in a clean nanotube device. The interaction evolves only at a finite axial magnetic field and displays a distinct magnetic field dependence of the Franck-Condon coupling, different for different electronic base states and indicating a valley-dependent electron-vibron coupling. A tentative cause of these effects, reshaping of the electronic wavefunction by the magnetic field, is discussed and demonstrated in a model.

cond-mat.mes-hall↗

arXiv2019

Shaping electron wave functions in a carbon nanotube with a parallel magnetic field

A magnetic field, through its vector potential, usually causes measurable changes in the electron wave function only in the direction transverse to the field. Here we demonstrate experimentally and theoretically that in carbon nanotube quantum dots, combining cylindrical topology and bipartite hexagonal lattice, a magnetic field along the nanotube axis impacts also the longitudinal profile of the electronic states. With the high (up to 17T) magnetic fields in our experiment the wave functions can be tuned all the way from "half-wave resonator" shape, with nodes at both ends, to "quarter-wave resonator" shape, with an antinode at one end. This in turn causes a distinct dependence of the conductance on the magnetic field. Our results demonstrate a new strategy for the control of wave functions using magnetic fields in quantum systems with nontrivial lattice and topology.

cond-mat.mes-hall↗

arXiv2018

Carbon Nanotube Millikelvin Transport and Nanomechanics

Single wall carbon nanotubes cooled to cryogenic temperatures are outstanding electronic as well as nano-electromechanical model systems. To probe a largely unperturbed system, we measure a suspended carbon-nanotube device where the nanotube is grown in the last fabrication step, thus avoiding damage and residues from subsequent processing. In this ultra-clean device, we observe the transport spectrum and its interaction with nano-electromechanics over a wide gate voltage range and thereby over a wide range of coupling parameters between the quantum dot and the contact electrodes.

cond-mat.mes-hall↗

arXiv2018

Lab::Measurement - A portable and extensible framework for controlling lab equipment and conducting measurements

Lab::Measurement is a framework for test and measurement automatization using Perl 5. While primarily developed with applications in mesoscopic physics in mind, it is widely adaptable. Internally, a layer model is implemented. Communication protocols such as IEEE 488, USB Test & Measurement, or, e.g., VXI-11 are addressed by the connection layer. The wide range of supported connection backends enables unique cross-platform portability. At the instrument layer, objects correspond to equipment connected to the measurement PC (e.g., voltage sources, magnet power supplies, multimeters, etc.). The high-level sweep layer automates the creation of measurement loops, with simultaneous plotting and data logging. An extensive unit testing framework is used to verify functionality even without connected equipment. Lab::Measurement is distributed as free and open source software.

physics.ins-det↗

arXiv2018

Quartz tuning-fork based carbon nanotube transfer into quantum device geometries

With the objective of integrating single clean, as-grown carbon nanotubes into complex circuits, we have developed a technique to grow nanotubes directly on commercially available quartz tuning forks using a high temperature CVD process. Multiple straight and aligned nanotubes bridge the >100um gap between the two tips. The nanotubes are then lowered onto contact electrodes, electronically characterized in situ, and subsequently cut loose from the tuning fork using a high current. First quantum transport measurements of the resulting devices at cryogenic temperatures display Coulomb blockade characteristics.

cond-mat.mes-hall↗

arXiv2018

Nanomechanical characterization of the Kondo charge dynamics in a carbon nanotube

Using the transversal vibration resonance of a suspended carbon nanotube as charge detector for its embedded quantum dot, we investigate the case of strong Kondo correlations between a quantum dot and its leads. We demonstrate that even when large Kondo conductance is carried at odd electron number, the charging behaviour remains similar between odd and even quantum dot occupation. While the Kondo conductance is caused by higher order processes, a sequential tunneling only model can describe the time-averaged charge. The gate potentials of maximum current and fastest charge increase display a characteristic relative shift, which is suppressed at increased temperature. These observations agree very well with models for Kondo-correlated quantum dots.

cond-mat.mes-hall↗

arXiv2016

Secondary electron interference from trigonal warping in clean carbon nanotubes

We investigate Fabry-Perot interference in an ultraclean carbon nanotube resonator. The conductance shows a clear superstructure superimposed onto conventional Fabry-Perot oscillations. A sliding average over the fast oscillations reveals a characteristic slow modulation of the conductance as a function of the gate voltage. We identify the origin of this secondary interference in intervalley and intravalley backscattering processes which involve wave vectors of different magnitude, reflecting the trigonal warping of the Dirac cones. As a consequence, the analysis of the secondary interference pattern allows us to estimate the chiral angle of the carbon nanotube.

cond-mat.mes-hall↗

arXiv2016

Towards carbon nanotube growth into superconducting microwave resonator geometries

The in-place growth of suspended carbon nanotubes facilitates the observation of both unperturbed electronic transport spectra and high-Q vibrational modes. For complex structures integrating, e.g., superconducting rf elements on-chip, selection of a chemically and physically resistant material that survives the chemical vapor deposition (CVD) process provides a challenge. We demonstrate the implementation of molybdenum-rhenium coplanar waveguide resonators that exhibit clear resonant behaviour at cryogenic temperatures even after having been exposed to nanotube growth conditions. The properties of the MoRe devices before and after CVD are compared to a reference niobium device.

cond-mat.mes-hall↗

arXiv2015

Co-sputtered MoRe thin films for carbon nanotube growth-compatible superconducting coplanar resonators

Molybdenum rhenium alloy thin films can exhibit superconductivity up to critical temperatures of $T_c=15\mathrm{K}$. At the same time, the films are highly stable in the high-temperature methane / hydrogen atmosphere typically required to grow single wall carbon nanotubes. We characterize molybdenum rhenium alloy films deposited via simultaneous sputtering from two sources, with respect to their composition as function of sputter parameters and their electronic dc as well as GHz properties at low temperature. Specific emphasis is placed on the effect of the carbon nanotube growth conditions on the film. Superconducting coplanar waveguide resonators are defined lithographically; we demonstrate that the resonators remain functional when undergoing nanotube growth conditions, and characterize their properties as function of temperature. This paves the way for ultra-clean nanotube devices grown in situ onto superconducting coplanar waveguide circuit elements.

cond-mat.mes-hall↗

arXiv2015

Liquid-induced damping of mechanical feedback effects in single electron tunneling through a suspended carbon nanotube

In single electron tunneling through clean, suspended carbon nanotube devices at low temperature, distinct switching phenomena have regularly been observed. These can be explained via strong interaction of single electron tunneling and vibrational motion of the nanotube. We present measurements on a highly stable nanotube device, subsequently recorded in the vacuum chamber of a dilution refrigerator and immersed in the 3He/4He mixture of a second dilution refrigerator. The switching phenomena are absent when the sample is kept in the viscous liquid, additionally supporting the interpretation of dc-driven vibration. Transport measurements in liquid helium can thus be used for finite bias spectroscopy where otherwise the mechanical effects would dominate the current.

cond-mat.mes-hall↗

arXiv2015

Broken SU(4) symmetry in a Kondo-correlated carbon nanotube

Understanding the interplay between many-body phenomena and non-equilibrium in systems with entangled spin and orbital degrees of freedom is a central objective in nano-electronics. We demonstrate that the combination of Coulomb interaction, spin-orbit coupling and valley mixing results in a particular selection of the inelastic virtual processes contributing to the Kondo resonance in carbon nanotubes at low temperatures. This effect is dictated by conjugation properties of the underlying carbon nanotube spectrum at zero and finite magnetic field. Our measurements on a clean carbon nanotube are complemented by calculations based on a new approach to the non-equilibrium Kondo problem which well reproduces the rich experimental observations in Kondo transport.

cond-mat.mes-hall↗

arXiv2014

Thermally induced subgap features in the cotunneling spectroscopy of a carbon nanotube

We report on nonlinear cotunneling spectroscopy of a carbon nanotube quantum dot coupled to Nb superconducting contacts. Our measurements show rich subgap features in the stability diagram which become more pronounced as the temperature is increased. Applying a transport theory based on the Liouville-von Neumann equation for the density matrix, we show that the transport properties can be attributed to processes involving sequential as well as elastic and inelastic cotunneling of quasiparticles thermally excited across the gap. In particular, we predict thermal replicas of the elastic and inelastic cotunneling peaks, in agreement with our experimental results.

cond-mat.mes-hall↗