Searcharxiv⌕ Search

arXiv subjects

A. K. M. A. Islam

Publications and source records attributed to A. K. M. A. Islam.

48 records · Page 3Linked to original sources

Newly synthesized Ti5Al2C3: Electronic and optical properties by first-principles method

A theoretical study of the newly identified Ti5Al2C3 belonging to the MAX phases has been performed by using the first-principles pseudopotential plane-wave method within the generalized gradient approximation (GGA). The energy band structure and optical properties are reported for the first time. It is seen that Ti 3d electrons mainly contribute to the DOS at the Fermi level, and should be involved in the conduction properties. The parameters of optical properties (dielectric function, absorption spectrum, conductivity, energy-loss spectrum and reflectivity) for Ti5Al2C3 are calculated and discussed. The material has a large positive static dielectric constant of 130 which indicates it to be a good dielectric material. Further the reflectivity of Ti5Al2C3 is high in the infrared-visible-UV region up to ~ 9.7 eV showing promise as a good coating material to avoid solar heating. Keywords: A: Ti5Al2C3; B: First-principles; C: Electronic structure; C: Optical properties

cond-mat.mtrl-sci↗

Sn1-xBixO2 and Sn1-xTaxO2 (0 \leq x \leq 0.75): A first-principles study

The structural, elastic, electronic and optical (x = 0) properties of doped Sn1-xBixO2 and Sn1-xTaxO2 (0 \leq x \leq 0.75) are studied by using the first-principles pseudopotential plane-wave method within the local density approximation. The independent elastic constants Cij and other elastic parameters of these compounds have been calculated for the first time. The mechanical stability of the compounds with different doping concentrations has also been studied. The electronic band structure and density of states are calculated and the effect of doping on these properties is also analyzed. It is seen that the band gap of the undoped compound narrowed with dopant concentration which disappeared for x = 0.26 for Bi doping and 0.36 for Ta doping. The materials thus become conductive oxides through the change in the electronic properties of the compound for x \leq 0.75 which may be useful for potential application. The calculated optical properties, e.g. dielectric function, refractive index, absorption spectrum, loss-function, reflectivity and conductivity of the undoped SnO2 in two polarization directions are compared with both previous calculations and measurements. Keywords: Doped SnO2; First-principles; Mechanical properties; Electronic band structure; Optical properties.

cond-mat.mtrl-sci↗

Phase stability and physical properties of hypothetical V4SiC3

We study the phase stability, mechanical, electronic, optical properties and Vicker's hardness of the newly predicted layered compound V4SiC3 using the first-principles method. This hypothetical compound is found to possess higher bulk modulus as well as higher hardness than those of a similar V4AlC3. The Mulliken bond population analysis indicates that the substitution of Al atom with the Si atom increases the Vicker's hardness of this compound. The electronic band structure shows that the conductivity is metallic and the main contribution comes from V 3d states. The partial density of states (PDOS) shows that the hybridization peak of V 3d and C 2s lies lower in energy than that of V 3d and Si 3p states which suggests that the V 3d - C 2s bond is stronger than the V 3d - Si 3p bond. The results are consistent with our bond analysis. Further we have discussed the origin of the features that appear in the optical properties. V4SiC3 is seen as a promising dielectric material showing a much better candidate material as a coating to avoid solar heating than those of V4AlC3, α-Nb4SiC3 and Ti4AlN3 compounds. Keywords: MAX phase V4SiC3; Phase stability; Electronic properties; Optical properties; Vicker's hardness. PACS: 61.66.Fn, 62.20.-x, 62.20.Dc, 71.15Mb, 78.20.Ci

cond-mat.mtrl-sci↗

Structural, elastic, electronic and optical properties of a newly predicted layered-ternary Ti4SiN3: A First-principles study

We study a newly predicted layered-ternary compound Ti4SiN3 in its α- and β-phases. We calculate their mechanical, electronic and optical properties and then compare these with those of other compounds M4AX3 (M = V, Ti, Ta; A = Si, Al; X = N, C). The results show that the hypothetical Ti4SiN3 shows an improved behavior of the resistance to shape change and uniaxial tensions and a slight elastic anisotropy. The electronic band structures for both α- and β-Ti4SiN3 show metallic conductivity in which Ti 3d states dominate. The hybridization peak of Ti 3d and N 2s lies lower in energy than that of Ti 3d and Si 3p states which suggests that the Ti 3d - N 2s bond is stronger than the Ti 3d - Si 3p bond. Using band structure we discuss the origin of different features of optical properties. The α-phase of predicted compound has improved behavior in reflectivity compared to those of similar types of compounds. Keywords: Ternary nitride; First-principles; Mechanical properties; Electronic band structure; Optical properties

cond-mat.mtrl-sci↗

Elastic, electronic and optical properties of hypothetical SnNNi3 and CuNNi3 in comparison with superconducting ZnNNi3

The elastic, electronic and optical properties of MNNi3 (M= Zn, Sn and Cu) have been calculated using the plane-wave ultrasoft pseudopotential technique which is based on the first-principles density functional theory (DFT) with generalized gradient approximation (GGA). The optimized lattice parameters, independent elastic constants (C11, C12, and C44), bulk modulus B, Compressibility K, shear modulus G, and Poisson's ratio \u{psion}, as well as the band structures, total and atom projected densities of states and finally the optical properties of MNNi3 have been evaluated and discussed. The electronic band structures of the two hypothetical compounds show metallic behavior just like the superconducting ZnNNi3. Using band structures, the origin of features that appear in different optical properties of all the three compounds have been discussed. The large reflectivity of the predicted compounds in the low energy region might be good candidate materials as a coating to avoid solar heating. Key words: MNNi3, Ab initio calculations, Elastic properties, Electronic band structure, Optical properties.

cond-mat.mtrl-sci↗

High pressure Ca-VI phase between 158-180 GPa: Stability, electronic structure and superconductivity

We have performed ab initio calculations for new high-pressure phase of Ca-VI between 158-180 GPa. The study includes elastic parameters of mono- and poly-crystalline aggregates, electronic band structure, lattice dynamics and superconductivity. The calculations show that the orthorhombic Pnma structure is mechanically and dynamically stable in the pressure range studied. The structure is superconducting in the entire pressure range and the calculated Tc (~25K) is maximum at ~172 GPa, where the transfer of charges from 4s to 3d may be thought to be completed.

cond-mat.supr-con↗

Structural, Elastic, Electronic and Optical Properties of a New Layered-Ternary Ta4SiC3 Compound

We propose a new layered-ternary Ta4SiC3 with two different stacking sequences (α- and β-phases) of the metal atoms along c axis and study their structural stability. The mechanical, electronic and optical properties are then calculated and compared with those of other compounds M4AX3 (M = V, Nb, Ta; A = Al, Si and X = C). The predicted compound in the α-phase is found to possess higher hardness than any of these compounds. The independent elastic constants of the two phases are also evaluated and the results discussed. The electronic band structures for α- and β-Ta4SiC3 show metallic conductivity. Ta 5d electrons are mainly contributing to the total density of states (DOS). We see that the hybridization peak of Ta 5d and C 2p lies lower in energy and the Ta 5d-C 2p bond is stronger than Ta 5d-Si 3p bond. Further an analysis of the different optical properties shows the compound to possess improved behavior compared to similar types of compounds.

cond-mat.mtrl-sci↗

Elastic and electronic properties of PbO-type FeSe1-xTex (x = 0 - 1.0): A first-principles study

The effect of doping on electronic and other related properties of PbO-type FeSe1-xTex has been investigated theoretically using density functional method. The elastic properties for mono- and poly-crystalline FeSe1-xTex system are predicted for the first time and the results discussed. Analysis of doping dependent band characteristics in conjunction with previous studies reveal that favorable nesting of Fermi surface indicates a possible basis for understanding why Tc in FeSe1-xTex is maximum for x ~ 0.5. Keywords: FeSe superconductors, Substitution effect, Elastic properties, Electronic properties. PACS: 74.62.Dh, 74.70.Dd, 74.20.Pq, 74.25.Ld

cond-mat.supr-con↗

AlH3 between 65-110 GPa: implications of electronic band and phonon structures

A first-principles density-functional-theory method has been used to reinvestigate the mechanical and dynamical stability of the metallic phase of AlH3 between 65-110 GPa. The electronic properties and phonon dynamics as a function of pressure are also explored. We find electron-phonon superconductivity in the cubic Pm-3n structure with critical temperature Tc = 37 K at 70 GPa which decreases rapidly with the increase of pressure. Further unlike a previously calculated Tc value of 24 K at 110 GPa, we do not find any superconductivity of significance at this pressure which is consistent with experimental observation.

cond-mat.supr-con↗

Superconductivity in Diamond-like BC3 Phase: A First-principles Investigation

Two possible phases of superhard material BC3 originating from the cubic diamond structure are investigated by ab initio pseudopotential density functional method using generalized gradient approximation (GGA). We calculate their elastic constants, electronic band structure, and density of states (DOS). Full phonon frequencies, electron-phonon coupling constant and possible superconducting Tc of the metallic phase with tetragonal symmetry (t-BC3, space group P-42m) have for the first time been investigated at 5 and 10 GPa. The calculated electron-phonon coupling (0.67) and the logarithmically-averaged frequency (862 cm-1) show superconductivity for the undoped t-BC3 with Tc = 20 K at 5 GPa, which decreases to 17.5 K at 10 GPa. Keywords: Superhard BC3, Band structure, Phonon spectra, Superconductivity PACS: 62.20.-x, 71.15.Mb, 74.10.+v, 74.20.Pq, 74.25.Kc

cond-mat.supr-con↗

New Superconducting RbFe2As2: A First-principles Investigation

RbFe2As2 has recently been reported to be a bulk superconductor with Tc = 2.6 K in the undoped state, in contrast to undoped BaFe2As2 with a magnetic ground state. We present here the results of the first-principles calculations of the structural, elastic and electronic properties for this newest superconductor and discuss its behaviour in relation to other related systems. Keywords: RbFe2As2, Electronic structure; Elastic constant; Superconductivity. PACS: 74.70.Dd, 74.10.+v, 74.20.Pq, 75.25.Ld

cond-mat.supr-con↗

Electronic band structure, phonon spectrum, and elastic properties of LaOFeAs

We present results of ab-initio calculations of the electronic band structure, lattice dynamical properties, and elastic constants of LaOFeAs, the parent compound of the recently discovered superconducting iron-oxypnictide (LaO1-xFxFeAs). The total and partial electronic density of states (EDOS) of the undoped LaOFeAs (in the insulating or metallic state) are extracted from the electronic band structure. The phonon dispersion and the phonon density of states (PDOS) are also studied. Possible implications of the band structure, EDOS, and PDOS of LaOFeAs on the eventual appearance of high-Tc superconductivity upon carrier doping are discussed. The values of various independent elastic constants for both insulating and metallic states are estimated and discussed.

cond-mat.supr-con↗