SearcharxivSearch

arXiv subjects

A. K. Tagantsev

Publications and source records attributed to A. K. Tagantsev.

At least 19 recordsLinked to original sources

Photovoltaic creation of charged domain walls in barium titanate

The optical control of domain structures in ferroelectrics is of great interest. In the present work, we demonstrate the reliable creation of charged domain walls - conductive channels in otherwise insulating barium titanate - by a combined effect of light and electric field. We propose a scenario for the documented process, in which the bulk photovoltaic effect plays the key role, providing charge screening at the walls. Our scenario is supported by the results of phase-field simulations. The results are of interest for future reconfigurable electronic and opto-electronic devices.

cond-mat.mtrl-sci

Generation of squeezed Fock states by measurement

The generation of squeezed Fock states by the one or more photon subtraction from a two-mode entangled Gaussian (TMEG) state is theoretically addressed. We showed that an arbitrary order Fock state can be generated this way and we obtained a condition that should be imposed on the parameters of the TMEG state to guaranty such a generation. We called the regime, in which this condition is satisfied, universal solution regime. We showed that, for first squeezed Fock state, the above condition is redundant such that the generation of the first squeezed Fock state is still possible by a one photon subtraction from an arbitrary TMEG state. At the same time, the maximum generation probability of the first squeezed Fock state generation corresponds to the universal solution regime. We applied the above results to the description of generation of the squeezed Fock states using a beam splitter and a Controlled-Z operation. We have estimated the parameters of such setups and input squeezed states, which are necessary to obtain squeezed Fock states with the maximum probability.

quant-ph

"Membrane-outside" as an optomechanical system

We theoretically study an optomechanical system, which consists of a two-sided cavity and a mechanical membrane that is placed outside of it. The membrane is positioned close to one of its mirrors, and the cavity is coupled to the external light field through the other mirror. Our study is focused on the regime where the dispersive optomechanical coupling in the system vanishes. Such a regime is found to be possible if the membrane is less reflecting than the adjacent mirror, yielding a potentially very strong dissipative optomechanical coupling. Specifically, if the absolute values of amplitude transmission coefficients of the membrane and the mirror, $t$ and $t_m$ respectively, obey the condition $ t_m^2< t\ll t_m\ll 1$, the dissipative coupling constant of the setup exceeds the dispersive coupling constant for an optomechanical cavity of the same length. The dissipative coupling constant and the corresponding optomechanical cooperativity of the proposed system are also compared with those of the Michelson-Sagnac interferometer and the so-called "membrane-at-the-edge" system, which are known for a strong optomechanical dissipative interaction. It is shown that under the above condition, the system proposed here is advantageous in both aspects. It also enables an efficient realization of the two-port configuration, which was recently proposed as a promising optomechanical system, providing, among other benefits, a possibility of quantum limited optomechanical measurements in a system, which does not suffer from any optomechanical instability.

quant-ph

Spontaneous symmetry-breaking in optomechanical cavity

A theoretical consideration of the so-called "membrane-in-the-middle" optomechanical cavity revealed that it undergoes a spontaneous symmetry breaking as a function of the transparency of the membrane. Such typical features of this phenomenon as a square-root development of the order parameter and divergency of the critical susceptibility were identified. In the contract to classical spontaneous-symmetry-breaking systems of ferromagnets and ferroelectrics, in the considered system, this divergency remains, due to interference effects, an "internal" property of the system, which does not reveal itself in any divergency of its observables. A spontaneous symmetry breaking in an optomechanical cavity might pave a new way to enhanced optomechanical interactions.

physics.optics

Quantum limited measurements with lossy optical cavity enabled by dissipative optomechanical coupling

We analyze a cavity optomechanical setup, in which position of an oscillator modulates optical loss. We show that in such setup quantum limited position measurements can be performed if the external cavity coupling rate matches the optical loss rate, a condition known as "critical coupling". Additionally, under this condition the setup exhibits a number of potential benefits for practical operation including the complete absence of dynamical backaction, and hence optomechanical instability, and rejection of classical laser noise and thermal fluctuations of cavity frequency from the measurement record. We propose two implementations of this scheme: one based on signal-recycled Michelson-type interferometer and the other on a tilted membrane inside Fabry-Perot cavity.

quant-ph

Dissipative vs dispersive coupling in quantum opto-mechanics: squeezing ability and stability

Generation of squeezed light and optomechanical instability for dissipative type of opto- mechanical coupling is theoretically addressed for a cavity with the input mirror, serving as a mechanical oscillator, or an equivalent system. The problem is treated analytically for the case of resonance excitation or small detunings, mainly focusing on the bad cavity limit. A qualitative difference between the dissipative and purely dispersive coupling is reported. In particular, it is shown that, for the purely dissipative coupling in the bad cavity regime, the backaction is strongly reduced and the squeezing ability of the system is strongly suppressed, in contrast to the case of purely dispersive coupling. It is also shown that, for small detunings, stability diagrams for the cases of the purely dispersive and dissipative couplings are qualitatively identical to within the change of the sign of detuning. The results obtained are compared with those from the recent theoretical publications.

quant-ph

Impurity-induced Polar States in SrTiO3 Quantum Paraelectric

Short and long range impurity-induced polar ordering in Sr1-xCaxTiO3 with x = 0.014 (SCT-1.4) and SrTi(16O0.0318O0.97)3 (STO-18) single crystals were investigated and discussed on the basis of the light refraction temperature dependences measurements. For SCT-1.4 the temperature dependences of the morphic birefringence and dielectric hysteresis loops were measured. Within the optical indicatrix perturbation approach a method for calculation from polar contributions to the refraction of light of short-range polarization contribution Psh originated by spatial fluctuations is developed for the systems with the coexistence of long and short range polar ordering. The magnitudes and temperature dependences of Psh and long-range spontaneous polarization Ps have been determined in SCT-1.4 and STO-18. The results allowed to characterize quantitatively and to compare contributions of short (Psh) and long (Ps) range ordering in the formation of impurity-induced polar phase in SrTiO3.

cond-mat.mtrl-sci

Impact of surface phenomena on direct bulk flexoelectric effect in finite samples

In the framework of a continuum theory, it is shown that the direct flexoelectric response of a finite sample essentially depends on the surface polarization energy, even in the thermodynamic limit where the body size tends to infinity. It is found that a modification of the surface energy can lead to a change of the polarization response by a factor of two. The origin of the effect is an electric field produced by surface dipoles induced by the strain gradient. The unexpected sensitivity of the polarization response to the surface energy in the thermodynamic limit is conditioned by the fact that the moments of the surface dipoles may scale as the body size.

cond-mat.mtrl-sci

Lattice dynamics and antiferroelectricity in PbZrO$_3$ tested by X-ray and Brillouin light scattering

We report the results of comprehensive study of the critical dynamics of the prototype perovskite antiferroelectric PbZrO$_3$. The combination of inelastic X-ray and diffuse X-ray scattering techniques and Brillouin light scattering was used. It is found that the dispersion of the TA phonons is strongly anisotropic. The dispersion curve of the in-plane polarized TA phonons propagating in [1 1 0] direction demonstrates pronounced softening. Slowing down of the excitations at R-point is found, it is manifested in growing of the central peak. This slowing down is too weak to be considered as a primary origin of the corresponding order parameter. Obtained results are treated in terms of TA--TO flexoelectric mode coupling. It is demonstrated that the structural phase transformation in PbZrO$_3$ can be considered as the result of the only intrinsic instability associated with the ferroelectric soft mode.

cond-mat.mtrl-sci

Bichiral structure of feroelectric domain wall driven by flexoelectricity

The influence of flexoelectric coupling on the internal structure of neutral domain walls in tetragonal phase of perovskite ferroelectrics is studied. The effect is shown to lower the symmetry of 180-degree walls which are oblique with respect to the cubic crystallographic axes, while {100} and {110} walls stay "untouched". Being of the Ising type in the absence of the flexoelectric interaction, the oblique domain walls acquire a new polarization component with a structure qualitatively different from the classical Bloch-wall structure. In contrast to the Bloch-type walls, where the polarization vector draws a helix on passing from one domain to the other, in the flexoeffect-affected wall, the polarization rotates in opposite directions on the two sides of the wall and passes through zero in its center. Since the resulting polarization profile is invariant upon inversion with respect to the wall center it does not brake the wall symmetry in contrast to the classical Bloch-type walls. The flexoelectric coupling lower the domain wall energy and gives rise to its additional anisotropy that is comparable to that conditioned by the elastic anisotropy. The atomic orderof- magnitude estimates shows that the new polarization component P2 may be comparable with spontaneous polarization Ps, thus suggesting that, in general, the flexoelectric coupling should be mandatory included in domain wall simulations in ferroelectrics. Calculations performed for barium titanate yields the maximal value of the P2, which is much smaller than that of the spontaneous polarization. This smallness is attributed to an anomalously small value of a component of the "strain-polarization" elecrostictive tensor in this material.

cond-mat.mtrl-sci

Thermodynamics of Electromechanically-Coupled Mixed Ionic-Electronic Conductors: Deformation potential, Vegard strains and Flexoelectric effect

Strong coupling among external voltage, electrochemical potentials, concentrations of electronic and ionic species, and strains is a ubiquitous feature of solid state mixed ionic-electronic conductors (MIECs), the materials of choice in devices ranging from electroresistive and memristive elements to ion batteries and fuel cells. Here, we analyze in detail the electromechanical coupling mechanisms and derive generalized bias-concentration-strain equations for MIECs including effects of concentration-driven chemical expansion, deformation potential, and flexoelectric effect contributions. This analysis is extended towards the bias-induced strains in the uniform and scanning probe microscopy-like geometries. Notably, the contribution of the electron-phonon and flexoelectric coupling to the local surface displacement of the mixed ionic-electronic conductor caused by the electric field scanning probe microscope tip has not been considered previously. The developed thermodynamic approach allows evolving theoretical description of mechanical phenomena induced by the electric fields (electro-mechanical response) in solid state ionics towards analytical theory and phase-field modeling of the MIECs in different geometries and under varying electrical, chemical, and mechanical boundary conditions.

cond-mat.mtrl-sci

Polar phonons in some compressively stressed epitaxial and polycrystalline SrTiO3 thin films

Several SrTiO3 (STO) thin films without electrodes processed by pulsed laser deposition, of thicknesses down to 40 nm, were studied using infrared transmission and reflection spectroscopy. The complex dielectric responses of polar phonon modes, particularly ferroelectric soft mode, in the films were determined quantitatively. The compressed epitaxial STO films on (100) La0.18Sr0.82Al0.59-Ta0.41O3 substrates (strain 0.9%) show strongly stiffened phonon responses, whereas the soft mode in polycrystalline film on (0001) sapphire substrate shows a strong broadening due to grain boundaries and/or other inhomogeneities and defects. The stiffened soft mode is responsible for a much lower static permittivity in the plane of the compressed film than in the bulk samples.

cond-mat.mtrl-sci

Landau thermodynamic potential for BaTiO_3

In the paper, the description of the dielectric and ferroelectric properties of BaTiO_3 single crystals using Landau thermodynamic potential is addressed. Our results suggest that when using the sixth-power free energy expansion of the thermodynamic potential, remarkably different values of the fourth-power coefficient, β(the coefficient of P^4_i terms), are required to adequately reproduce the nonlinear dielectric behavior of the paraelectric phase and the electric field induced ferroelectric phase, respectively. In contrast, the eighth-power expansion with a common set of coefficients enables a good description for both phases at the same time. These features, together with the data available in literature, strongly attest to the necessity of the eighth-power terms in Landau thermodynamic potential of BaTiO_3. In addition, the fourth-power coefficients, βand ξ(the coefficient of P^2_i P^2_j terms), were evaluated from the nonlinear dielectric responses along [001], [011], and [111] orientations in the paraelectric phase. Appreciable temperature dependence was evidenced for both coefficients above T_C. Further analysis on the linear dielectric response of the single domain crystal in the tetragonal phase demonstrated that temperature dependent anharmonic coefficients are also necessary for an adequate description of the dielectric behavior in the ferroelectric phase. As a consequence, an eighth-power thermodynamic potential, with some of the anharmonic coefficients being temperature dependent, was proposed and compared with the existing potentials. In general, the potential proposed in this work exhibits a higher quality in reproducing the dielectric and ferroelectric properties of this prototypic ferroelectric substance.

cond-mat.stat-mech

Pressure on charged domain walls and additional imprint mechanism in ferroelectrics

The impact of free charges on the local pressure on a charged ferroelectric domain wall produced by an electric field has been analyzed. A general formula for the local pressure on a charged domain wall is derived considering full or partial compensation of bound polarization charges by free charges. It is shown that the compensation can lead to a very strong reduction of the pressure imposed on the wall from the electric field. In some cases this pressure can be governed by small nonlinear effects. It is concluded that the free charge compensation of bound polarization charges can lead to substantial reduction of the domain wall mobility even in the case when the mobility of free charge carriers is high. This mobility reduction gives rise to an additional imprint mechanism which may play essential role in switching properties of ferroelectric materials. The effect of the pressure reduction on the compensated charged domain walls is illustrated for the case of 180-degree ferroelectric domain walls and of 90-degree ferroelectric domain walls with the head-to-head configuration of the spontaneous polarization vectors.

cond-mat.mtrl-sci

Anharmonicity of BaTiO_3 single crystals

By analyzing the dielectric non-linearity with the Landau thermodynamic expansion, we find a simple and direct way to assess the importance of the eighth order term. Following this approach, it is demonstrated that the eighth order term is essential for the adequate description of the para/ferroelectric phase transition of BaTiO_3. The temperature dependence of the quartic coefficient βis accordingly reconsidered and is strongly evidenced by the change of its sign above 165 C. All these findings attest to the strong polarization anharmonicity of this material, which is unexpected for classical displacive ferroelectrics.

cond-mat.mtrl-sci

Fluctuations and Landau-Devonshire expansion for barium titanate

The experimentally observed temperature dependence of the quartic coefficients in the Landau-Devonshire expansion for BaTiO_3 is naturally accounted for within a proper fluctuation model. It is explained, in particular, why one of the quartic coefficients varies with temperature above T_c while the second is constant. The tetragonal phase in BaTiO_3 is argued to exist essentially due to the thermal fluctuations, while the true Landau-Devonshire expansion with temperature-independent coefficients favours the rhombohedral ferroelectric phase. Certain conclusions concerning the temperature dependence of the sextic Landau-Devonshire coefficients are also made.

cond-mat.stat-mech

The Broad Brillouin Doublet and CP of Ktao_3 : Second Sound vs. Two-Phonon Difference Scattering

Low-T Brillouin spectra of the incipient ferroelectric KTaO3 exhibit a broad central peak (CP), and additional Brillouin doublets (BD), that can both be related to phonon-density fluctuations. On the basis of new high-resolution neutron data obtained of low-lying phonon branches, we analysed the phonon-kinetics mechanisms that are possibly the origin of these unusual features. Firstly, transverse acoustic (TA) phonons whose normal damping is faster than the BD frequency can produce hydrodynamic second sound. Secondly, two-phonon difference scattering from low damping thermal transverse phonons contribute to the spectra with either a sharp or a broader doublet, depending on the phonon group velocity and anisotropy of dispersion surfaces. The position of the observed sharp doublet is consistent with both mechanisms, but a comparison of the computed and experimental anisotropies favours the second process.

cond-mat.mtrl-sci

Low energy phonon spectrum and its parameterization in pure KTaO3 under 80 K

High resolution data on low energy phonon branches (acoustic and soft optic) along the three principal symmetry axes in pure KTaO3 were obtained by cold neutron inelastic scattering between 10 and 80 K. Additional off-principal axis measurements were performed to characterize the dispersion anisotropy (away from the <100> and <110> axes). The parameters of the phenomenological model proposed by Vaks are refined in order to successfully describe the experimental low temperature (10 < T < 100 K) dispersion curves, over an appreciable reciprocal space volume around the zone center (|q| < 0.25 rlu). The refined model, which involves only 4 temperature-independent adjustable parameters, is intended to serve as a basis for quantitative computations of multiphonon processes.

cond-mat.mtrl-sci