arXiv subjects

A. Litvinenko

Publications and source records attributed to A. Litvinenko.

6 recordsLinked to original sources

arXiv2021

Size-dependent enhancement of passive microwave rectification in magnetic tunnel junctions with perpendicular magnetic anisotropy

Spintronic rf detectors were demonstrated, recently, for energy harvesting and wireless communication at low input power. Here we report on the optimization of the rectified output dc voltage using magnetic tunnel junctions (MTJ) with strong perpendicular anisotropy (PMA) of both the polarizing and the free layer. The magnetization of the polarizing layer is fixed out of plane, while the free layer thickness is adjusted so that its magnetization orientation changes from in plane to out of plane. The rectification dc output voltage lies in the mV range for moderate rf powers, with a signal to noise ratio of 10 to 100 for Prf = -25dBm. It shows a strong dependence on the dimensions of the MTJ: it increases by a factor of 5 to 6 when reducing the diameter from 150nm to 20nm. This enhancement can be doubled when reducing the FL thickness from 1.8nm to 1.6nm. This dimensional enhancement is attributed to the change of the effective anisotropy of the excited free layer, and the MTJ resistance. The results are of interest for the design of spintronic based rf detectors with optimized sensitivity.

cond-mat.mes-hall↗

arXiv2020

A tunable magneto-acoustic oscillator with low phase noise

A frequency-tunable low phase noise magneto-acoustic resonator is developed on the base of a parallel-plate straight-edge bilayer consisting of a yttrium-iron garnet (YIG) layer grown on a substrate of a gallium-gadolinium garnet(GGG). When a YIG/GGG sample forms an ideal parallel plate, it supports a series of high-quality-factor acoustic modes standing along the plate thickness. Due to the magnetostriction of the YIG layer the ferromagnetic resonance (FMR) mode of the YIG layer can strongly interact with the acoustic thickness modes of the YIG/GGG structure, when the modes' frequencies match. A particular acoustic thickness mode used for the resonance excitations of the hybrid magneto-acoustic oscillations in a YIG/GGG bilayer is chosen by the YIG layer FMR frequency, which can be tuned by the variation of the external bias magnetic field. A composite magneto-acoustic oscillator, which includes an FMR-based resonance pre-selector, is developed to guarantee satisfaction of the Barkhausen criteria for a single-acoustic-mode oscillation regime. The developed low phase noise composite magneto-acoustic oscillator can be tuned from 0.84 GHz to 1 GHz with an increment of about 4.8 MHz (frequency distance between the adjacent acoustic thickness modes in a YIG/GGG parallel plate), and demonstrates the phase noise of -116 dBc/Hz at the offset frequency of 10 kHz.

physics.app-ph↗

arXiv2020

Experimental demonstration of a rapid sweep-tuned spectrum analyzer with temporal resolution based on a spin-torque nano-oscillator

It is demonstrated experimentally that a spin-torque nano-oscillator (STNO) rapidly sweep-tuned by a bias voltage can be used for time-resolved spectrum analysis of frequency-manipulated microwave signals with complicated multi-tone spectra. The critical reduction in the time of spectrum analysis comes from the naturally small time constants of a nano-sized STNO (1-100 ns). The demonstration is performed on a vortex-state STNO generating in a frequency range around 300 MHz, with frequency down-conversion and matched filtering used for signal processing. It is shown that this STNO-based spectrum analyzer can perform analysis of multi-tone signals, and signals with rapidly changing frequency components with time resolution on a $\mu$s time scale and frequency resolution limited only by the 'bandwidth' theorem. The proposed concept of rapid time-resolved spectrum analysis can be implemented with any type of micro and nano-scale frequency-swept oscillators having low time constants and high oscillation frequency.

physics.app-ph↗

arXiv2020

Determination of centrality in nuclear collisions by using hadron calorimeter

The determination of the centrality of nuclear collision or the value of the impact parameter of heavy nuclei is of great importance for the analysis of all experimental data and comparison with theory. One method is to measure the number of spectators using a hadron calorimeter located at a small angle to the nuclear beam. It is shown that with an achievable resolution of the hadron calorimeter in energy, the accuracy of determining the impact parameter is insufficient for using the calorimeter in the MPD / NICA and CBM / FAIR projects. The error reaches 35 % at a beam energy of 2.5 GeV even for peripheral collisions. Secondary processes during the passage of spectators through the nucleus give an additional contribution to the error for central collisions and at medium centralities.

hep-ex↗

arXiv2019

Analog and digital phase modulation of spin torque nano-oscillators

Spin torque nano-oscillators (STNO) are nanoscale devices with wide band frequency tunability. Their multifunctional RF properties are well suited to define novel schemes for wireless communications that use basic protocols for data transmission such as amplitude, frequency and phase shift keying (ASK, FSK, PSK). In contrast to ASK and FSK, implementation of PSK is more challenging for STNOs because of their relatively high phase noise. Here we introduce a special PSK technique by combining their modulation and injection locking functionality. The concept is validated using magnetic tunnel junction based vortex STNOs for injection locking at 2f and f/2 showing phase shifts up to 2.1rad and data transmission rates up to 4Mbit/s. Quadrature phase shift keying and analog phase modulation are also implemented, where the latter is employed for voice transmission over a distance of 10 meters. This demonstrates that STNO phase noise and output power meet the requested performances for operation in existing communication schemes.

physics.app-ph↗

arXiv2019

Determination of centrality in nucleus-nucleus collisions on the MPD/NICA installation

Measurement of the number of spectators in nucleus-nucleus collisions could be used to determine the number of participant nucleons involved in the interaction, i.e. get information about collision centrality. However, at energies of the NICA collider, energy resolution of the forward hadron calorimeter is insufficient for separation amplitude corresponding to different number of spectators. Uncertainty in the number of spectators leads to a large error in determining centrality. For central events inaccuracy in determining the collision parameter is about 40%, for peripheral ones, no better than 30% at a beam energy of 2.5 AGeV. The multiplicity scintillator detector will allow to obtain more accurate data. A method is proposed for determining the centrality, taking into account the real MPD installation geometry.

hep-ex↗