arXiv subjects

A. Lombardo

Publications and source records attributed to A. Lombardo.

At least 19 recordsLinked to original sources

arXiv2019

High-mobility, wet-transferred graphene grown by chemical vapor deposition

We report high room-temperature mobility in single layer graphene grown by Chemical Vapor Deposition (CVD) after wet transfer on SiO$_2$ and hexagonal boron nitride (hBN) encapsulation. By removing contaminations trapped at the interfaces between single-crystal graphene and hBN, we achieve mobilities up to$\sim70000cm^2 V^{-1} s^{-1}$ at room temperature and$\sim120000cm^2 V^{-1} s^{-1}$ at 9K. These are over twice those of previous wet transferred graphene and comparable to samples prepared by dry transfer. We also investigate the combined approach of thermal annealing and encapsulation in polycrystalline graphene, achieving room temperature mobilities$\sim30000 cm^2 V^{-1} s^{-1}$. These results show that, with appropriate encapsulation and cleaning, room temperature mobilities well above $10000cm^2 V^{-1} s^{-1}$ can be obtained in samples grown by CVD and transferred using a conventional, easily scalable PMMA-based wet approach.

cond-mat.mes-hall↗

arXiv2019

Screen-printed and spray coated graphene-based RFID transponders

We report Ultra-High-Frequency (UHF, 800MHz-1GHz) Radio Frequency Identification (RFID) transponders consisting of printed dipole antennas combined with RFID microchips. These are fabricated on Kapton via screen printing and on paper via spray coating, using inks obtained via microfluidization of graphite. We introduce a hybrid antenna structure, where an Al loop (small compared to the overall size of the antenna) is connected to a microchip with the double function of matching the impedances of antenna and microchip and avoiding bonding between exfoliated graphite and chip. The transponders have reading distance~11m at UHF RFID frequencies, larger than previously reported for graphene-based RFID and comparable with commercial transponders based on metallic antennas.

physics.app-ph↗

arXiv2018

Tetrahedral amorphous carbon resistive memories with graphene-based electrodes

Resistive-switching memories are alternative to Si-based ones, which face scaling and high power consumption issues. Tetrahedral amorphous carbon (ta-C) shows reversible, non-volatile resistive switching. Here we report polarity independent ta-C resistive memory devices with graphene-based electrodes. Our devices show ON/OFF resistance ratios$\sim$4x$10^5$, ten times higher than with metal electrodes, with no increase in switching power, and low power density$\sim$14$μ$W/$μ$m$^2$. We attribute this to a suppressed tunneling current due to the low density of states of graphene near the Dirac point, consistent with the current-voltage characteristics derived from a quantum point contact model. Our devices also have multiple resistive states. This allows storing more than one bit per cell. This can be exploited in a range of signal processing/computing-type operations, such as implementing logic, providing synaptic and neuron-like mimics, and performing analogue signal processing in non-von-Neumann architectures

physics.app-ph↗

arXiv2018

Cleaning Interfaces in Layered Materials Heterostructures

Heterostructures formed by stacking layered materials require atomically clean interfaces. However, contaminants are usually trapped between the layers, aggregating into blisters. We report a process to remove such blisters, resulting in clean interfaces. We fabricate blister-free regions of graphene encapsulated in hexagonal boron nitride of$\sim$5000$μ$m$^{2}$, limited only by the size of the exfoliated flakes. These have mobilities up to$\sim$180000cm$^2$V$^{-1}$s$^{-1}$ at room temperature, and$\sim$1.8$\times$10$^6$cm$^2$V$^{-1}$s$^{-1}$ at 9K. We further demonstrate the effectiveness of our approach by cleaning heterostructures assembled using graphene intentionally exposed to polymers and solvents. After cleaning, these samples reach similar high mobilities. We also showcase the general applicability of our approach to layered materials by cleaning blisters in other heterostructures based on MoS$_{2}$. This demonstrates that exposure of graphene to processing-related contaminants is compatible with the realization of high mobility samples, paving the way to the development of fab-based processes for the integration of layered materials in (opto)-electronic devices.

cond-mat.mes-hall↗

arXiv2017

Out-of-plane heat transfer in van der Waals stacks: electron-hyperbolic phonon coupling

Van der Waals heterostructures have emerged as promising building blocks that offer access to new physics, novel device functionalities, and superior electrical and optoelectronic properties. Applications such as thermal management, photodetection, light emission, data communication, high-speed electronics and light harvesting require a thorough understanding of (nanoscale) heat flow. Here, using time-resolved photocurrent measurements we identify an efficient out-of-plane energy transfer channel, where charge carriers in graphene couple to hyperbolic phonon polaritons in the encapsulating layered material. This hyperbolic cooling is particularly efficient, giving picosecond cooling times, for hexagonal BN, where the high-momentum hyperbolic phonon polaritons enable efficient near-field energy transfer. We study this heat transfer mechanism through distinct control knobs to vary carrier density and lattice temperature, and find excellent agreement with theory without any adjustable parameters. These insights may lead to the ability to control heat flow in van der Waals heterostructures.

cond-mat.mes-hall↗

arXiv2016

Ultra-strong nonlinear optical processes and trigonal warping in MoS$_2$ layers

We report ultra-strong high-order nonlinear multiphoton processes in monolayer MoS$_2$ (1L-MoS$_2$): the third harmonic is thirty times stronger than the second harmonic, and the fourth harmonic is comparable to the second harmonic. We find that second and third harmonic processes are strongly dependent on elliptical polarization, which can be used to selectively tune harmonic generation with different orders. We explain this by calculating the nonlinear response functions of 1L-MoS$_2$ with a continuum-model Hamiltonian and quantum-mechanical diagrammatic perturbation theory, highlighting the crucial role of trigonal warping. A similar effect is expected for all other transition-metal dichalcogenides. Our results pave the way for efficient and tunable harmonic generation based on layered materials for various applications, including microscopy and imaging

cond-mat.mes-hall↗

arXiv2015

Transport Conductivity of Graphene at RF and Microwave Frequencies

We measure graphene coplanar waveguides from direct current (DC) to 13.5GHz and show that the apparent resistance (in the presence of parasitic impedances) has an quadratic frequency dependence, but the intrinsic conductivity (without the influence of parasitic impedances) is frequency-independent. Consequently, in our devices the real part of the complex alternating current conductivity is the same as the DC value and the imaginary part~0. The graphene channel is modelled as a parallel resistive-capacitive network with a frequency dependence identical to that of the Drude conductivity with momentum relaxation time~2.1ps, highlighting the influence of alternating current (AC) electron transport on the electromagnetic properties of graphene. This can lead to optimized design of high-speed analogue field-effect transistors, mixers, frequency doublers, low-noise amplifiers and radiation detectors.

cond-mat.mes-hall↗

arXiv2015

Ultrafast pseudospin dynamics in graphene

Interband optical transitions in graphene are subject to pseudospin selection rules. Impulsive excitation with linearly polarized light generates an anisotropic photocarrier occupation in momentum space that evolves at timescales shorter than 100fs. Here, we investigate the evolution of non-equilibrium charges towards an isotropic distribution by means of fluence-dependent ultrafast spectroscopy and develop an analytical model able to quantify the isotropization process. In contrast to conventional semiconductors, the isotropization is governed by optical phonon emission, rather than electron-electron scattering, which nevertheless contributes in shaping the anisotropic photocarrier occupation within the first few fs.

cond-mat.mes-hall↗

arXiv2015

Valley and spin dynamics in monolayer MoS$_{2}$

Valleytronics targets the exploitation of the additional degrees of freedom in materials where the energy of the carriers may assume several equal minimum values (valleys) at non-equivalent points of the reciprocal space. In single layers of transition metal dichalcogenides (TMDs) the lack of inversion symmetry, combined with a large spin-orbit interaction, leads to a conduction (valence) band with different spin-polarized minima (maxima) having equal energies. This offers the opportunity to manipulate information at the level of the charge (electrons or holes), spin (up or down) and crystal momentum (valley). Any implementation of these concepts, however, needs to consider the robustness of such degrees of freedom, which are deeply intertwined. Here we address the spin and valley relaxation dynamics of both electrons and holes with a combination of ultrafast optical spectroscopy techniques, and determine the individual characteristic relaxation times of charge, spin and valley in a MoS$_{2}$ monolayer. These results lay the foundations for understanding the mechanisms of spin and valley polarization loss in two-dimensional TMDs: spin/valley polarizations survive almost two-orders of magnitude longer for holes, where spin and valley dynamics are interlocked, than for electrons, where these degrees of freedom are decoupled. This may lead to novel approaches for the integration of materials with large spin-orbit in robust spintronic/valleytronic platforms.

cond-mat.mtrl-sci↗

arXiv2014

Electron-hole pairing in graphene-GaAs heterostructures

Vertical heterostructures combining different layered materials offer novel opportunities for applications and fundamental studies of collective behavior driven by inter-layer Coulomb coupling. Here we report heterostructures comprising a single-layer (or bilayer) graphene carrying a fluid of massless (massive) chiral carriers, and a quantum well created in GaAs 31.5 nm below the surface, supporting a high-mobility two-dimensional electron gas. These are a new class of double-layer devices composed of spatially-separated electron and hole fluids. We find that the Coulomb drag resistivity significantly increases for temperatures below 5-10 K, following a logarithmic law. This anomalous behavior is a signature of the onset of strong inter-layer correlations, compatible with the formation of a condensate of permanent excitons. The ability to induce strongly-correlated electron-hole states paves the way for the realization of coherent circuits with minimal dissipation and nanodevices including analog-to-digital converters and topologically protected quantum bits.

cond-mat.mes-hall↗

arXiv2013

Measurement of Filling-Factor-Dependent Magnetophonon Resonances in Graphene Using Raman Spectroscopy

We perform polarization-resolved Raman spectroscopy on graphene in magnetic fields up to 45T. This reveals a filling-factor-dependent, multi-component anticrossing structure of the Raman G peak, resulting from magnetophonon resonances between magnetoexcitons and E$_{2g}$ phonons. This is explained with a model of Raman scattering taking into account the effects of spatially inhomogeneous carrier densities and strain. Random fluctuations of strain-induced pseudo-magnetic fields lead to increased scattering intensity inside the anti-crossing gap, consistent with the experiment.

cond-mat.mes-hall↗

arXiv2013

Effects of Electron-Electron Interactions on Electronic Raman Scattering of Graphite in High Magnetic Fields

We report the observation of strongly temperature-dependent, asymmetric spectral lines in electronic Raman scattering spectra of graphite in a high magnetic field up to 45 T applied along the c-axis. The magnetic field quantizes the in-plane motion, while the out-of-plane motion remains free, effectively reducing the system dimension from three to one. Optically created electron-hole pairs interact with, or shake up, the one-dimensional Fermi sea in the lowest Landau subbands. Based on the Tomonaga-Luttinger liquid theory, we show that interaction effects modify the van Hove singularity to the form $(ω-Δ)^{2α-1/2}$ at zero temperature. At finite temperature, we predict a thermal broadening factor that increases linearly with the temperature. Our model reproduces the observed temperature-dependent line-shape, determining $α$ to be $\sim$0.05 at 40 T.

cond-mat.mes-hall↗

arXiv2012

Production, Processing and Placement of Graphene and Two Dimensional Crystals

Graphene is at the centre of an ever growing research effort due to its unique properties, interesting for both fundamental science and applications. A key requirement for applications is the development of industrial-scale, reliable, inexpensive production processes. Here we review the state of the art of graphene preparation, production, placement and handling. Graphene is just the first of a new class of two dimensional materials, derived from layered bulk crystals. Most of the approaches used for graphene can be extended to these crystals, accelerating their journey towards applications.

cond-mat.mtrl-sci↗

arXiv2012

Electroluminescence in Single Layer MoS2

We detect electroluminescence in single layer molybdenum disulphide (MoS2) field-effect transistors built on transparent glass substrates. By comparing absorption, photoluminescence, and electroluminescence of the same MoS2 layer, we find that they all involve the same excited state at 1.8eV. The electroluminescence has pronounced threshold behavior and is localized at the contacts. The results show that single layer MoS2, a direct band gap semiconductor, is promising for novel optoelectronic devices, such as 2-dimensional light detectors and emitters.

cond-mat.mes-hall↗

arXiv2012

Ultrafast collinear scattering and carrier multiplication in graphene

Graphene is emerging as a viable alternative to conventional optoelectronic, plasmonic, and nanophotonic materials. The interaction of light with carriers creates an out-of-equilibrium distribution, which relaxes on an ultrafast timescale to a hot Fermi-Dirac distribution, that subsequently cools via phonon emission. Here we combine pump-probe spectroscopy, featuring extreme temporal resolution and broad spectral coverage, with a microscopic theory based on the quantum Boltzmann equation, to investigate electron-electron collisions in graphene during the very early stages of relaxation. We identify the fundamental physical mechanisms controlling the ultrafast dynamics in graphene, in particular the significant role of ultrafast collinear scattering, enabling Auger processes, including charge multiplication, key to improving photovoltage generation and photodetectors.

cond-mat.mes-hall↗

arXiv2012

Graphene field effect transistors as room-temperature Terahertz detectors

The unique optoelectronic properties of graphene [1] make it an ideal platform for a variety of photonic applications [2], including fast photodetectors [3], transparent electrodes [4], optical modulators [5], and ultra-fast lasers [6]. Owing to its high carrier mobility, gapless spectrum, and frequency-independent absorption coefficient, it has been recognized as a very promising element for the development of detectors and modulators operating in the Terahertz (THz) region of the electromagnetic spectrum (wavelengths in the hundreds of micrometers range), which is still severely lacking in terms of solid-state devices. Here we demonstrate efficient THz detectors based on antenna-coupled graphene field-effect transistors (FETs). These exploit the non-linear FET response to the oscillating radiation field at the gate electrode, with contributions of thermoelectric and photoconductive origin. We demonstrate room temperature (RT) operation at 0.3 THz, with noise equivalent power (NEP) levels < 30 nW/Hz^(1/2), showing that our devices are well beyond a proof-of-concept phase and can already be used in a realistic setting, enabling large area, fast imaging of macroscopic samples.

cond-mat.mes-hall↗

arXiv2012

Magnetophonon resonance in graphite: High-field Raman measurements and electron-phonon coupling contributions

We perform Raman scattering experiments on natural graphite in magnetic fields up to 45 T, observing a series of peaks due to interband electronic excitations over a much broader magnetic field range than previously reported. We also explore electron-phonon coupling in graphite via magnetophonon resonances. The Raman G peak shifts and splits as a function of magnetic field, due to the magnetically tuned coupling of the E2g optical phonons with the K- and H-point inter-Landau-level excitations. The analysis of the observed anticrossing behavior allows us to determine the electron-phonon coupling for both K- and H-point carriers. In the highest field range (>35 T) the G peak narrows due to suppression of electron-phonon interaction.

cond-mat.mes-hall↗

arXiv2011

Ink-Jet Printed Graphene Electronics

We demonstrate ink-jet printing as a viable method for large area fabrication of graphene devices. We produce a graphene-based ink by liquid phase exfoliation of graphite in N-Methylpyrrolidone. We use it to print thin-film transistors, with mobilities up to~95cm^2V^(-1)s(-1), as well as transparent and conductive patterns, with~80 % transmittance and~30kOhm/sq sheet resistance. This paves the way to all-printed, flexible and transparent graphene devices on arbitrary substrates

cond-mat.mtrl-sci↗