arXiv subjects

A. Lupascu

Publications and source records attributed to A. Lupascu.

30 records · Page 2Linked to original sources

arXiv2010

High-resolution spatial mapping of a superconducting NbN wire using single-electron detection

Superconducting NbN wires have recently received attention as detectors for visible and infrared photons. We present experiments in which we use a NbN wire for high-efficiency (40 %) detection of single electrons with keV energy. We use the beam of a scanning electron microscope as a focussed, stable, and calibrated electron source. Scanning the beam over the surface of the wire provides a map of the detection efficiency. This map shows features as small as 150 nm, revealing wire inhomogeneities. The intrinsic resolution of this mapping method, superior to optical methods, provides the basis of a characterization tool relevant for photon detectors.

cond-mat.supr-con↗

arXiv2010

Quantum non-demolition measurement of microwave photons using engineered quadratic interactions

We present a quantum electrical circuit with Josephson junctions formed of two anharmonic oscillators coupled with an interaction $gγ_{1}^{2}γ_{2}^{2}$ where $γ_{1}$ and $γ_{2}$ are position-like coordinates. This type of coupling allows the quantum non-demolition measurement of the energy of one oscillator by monitoring the frequency of the second oscillator. Despite the fundamental tradeoff between the coupling strength $g$ and maximum photon storage capacity of the oscillators, it is possible to achieve high fidelity detection of up to 10 photons over time scale of the order of microseconds. We discuss the possibility of observing quantum jumps in the number of photons and related applications.

cond-mat.mes-hall↗

arXiv2010

Selective darkening of degenerate transitions demonstrated with two superconducting quantum bits

Controlled manipulation of quantum states is central to studying natural and artificial quantum systems. If a quantum system consists of interacting sub-units, the nature of the coupling may lead to quantum levels with degenerate energy differences. This degeneracy makes frequency-selective quantum operations impossible. For the prominent group of transversely coupled two-level systems, i.e. qubits, we introduce a method to selectively suppress one transition of a degenerate pair while coherently exciting the other, effectively creating artificial selection rules. It requires driving two qubits simultaneously with the same frequency and specified relative amplitude and phase. We demonstrate our method on a pair of superconducting flux qubits. It can directly be applied to the other superconducting qubits, and to any other qubit type that allows for individual driving. Our results provide a single-pulse controlled-NOT gate for the class of transversely coupled qubits.

cond-mat.supr-con↗

arXiv2010

Low-crosstalk bifurcation detectors for coupled flux qubits

We present experimental results on the crosstalk between two AC-operated dispersive bifurcation detectors, implemented in a circuit for high-fidelity readout of two strongly coupled flux qubits. Both phase-dependent and phase-independent contributions to the crosstalk are analyzed. For proper tuning of the phase the measured crosstalk is 0.1 % and the correlation between the measurement outcomes is less than 0.05 %. These results show that bifurcative readout provides a reliable and generic approach for multi-partite correlation experiments.

cond-mat.supr-con↗

arXiv2010

Readout strength dependence of state projection in superconducting qubit

We have controlled the measurement strength of the qubit readout process by using a Josephson bifurcation amplifier (JBA : an AC-driven SQUID). The optimum readout pulse changes the superposition state into an eigenstate. To clarify how a sufficiently strong measurement causes a projection phenomenon, we have studied the projection conditions in the JBA readout. We found that the projection occurs above the pulse height at which visibility starts to appear. Furthermore, the projection continues to occur as readout strength increases, even though the visibility vanishes. This result helps us understanding the JBA readout process.

cond-mat.supr-con↗

arXiv2009

One- and two-photon spectroscopy of a flux qubit coupled to a microscopic defect

We observed the dynamics of a superconducting flux qubit coupled to an extrinsic quantum system (EQS). The presence of the EQS is revealed by an anticrossing in the spectroscopy of the qubit. The excitation of a two-photon transition to the third excited state of the qubit-EQS system allows us to extract detailed information about the energy level structure and the coupling of the EQS. We deduce that the EQS is a two-level system, with a transverse coupling to the qubit. The transition frequency and the coupling of the EQS changed during experiments, which supports the idea that the EQS is a two-level system of microscopic origin.

cond-mat.supr-con↗

arXiv2008

Role of relaxation in the quantum measurement of a superconducting qubit using a nonlinear oscillator

We analyze the relaxation of a superconducting flux qubit during measurement. The qubit state is measured with a nonlinear oscillator driven across the threshold of bifurcation, acting as a switching dispersive detector. This readout scheme is of quantum non-demolition type. Two successive readouts are used to analyze the evolution of the qubit and the detector during the measurement. We introduce a simple transition rate model to characterize the qubit relaxation and the detector switching process. Corrected for qubit relaxation the readout fidelity is at least 95%. Qubit relaxation strongly depends on the driving strength and the state of the oscillator.

cond-mat.supr-con↗

arXiv2008

Bose-Einstein condensation on a superconducting atom chip

We have produced a Bose-Einstein condensate (BEC) on an atom chip using only superconducting wires in a cryogenic environment. We observe the onset of condensation for 10^4 atoms at a temperature of 100 nK. This result opens the way for studies of atom losses and decoherence in a BEC interacting with a superconducting surface. Studies of dipole-blockade with long-lived Rydberg atoms in a small and dense atomic sample are underway.

physics.atom-ph↗

arXiv2006

Quantum non-demolition measurement of a superconducting two-level system

In quantum mechanics, the process of measurement is a subtle interplay between extraction of information and disturbance of the state of the quantum system. A quantum non-demolition (QND) measurement minimizes this disturbance by using a particular system - detector interaction which preserves the eigenstates of a suitable operator of the quantum system. This leads to an ideal projective measurement. We present experiments in which we perform two consecutive measurements on a quantum two -level system, a superconducting flux qubit, by probing the hysteretic behaviour of a coupled nonlinear resonator. The large correlation between the results of the two measurements demonstrates the QND nature of the readout method. The fact that a QND measurement is possible for superconducting qubits strengthens the notion that these fabricated mesoscopic systems are to be regarded as fundamental quantum objects. Our results are also relevant for quantum information processing, where projective measurements are used for protocols like state preparation and error correction.

cond-mat.supr-con↗

arXiv2006

High-contrast dispersive readout of a superconducting flux qubit using a nonlinear resonator

We demonstrate high-contrast state detection of a superconducting flux qubit. Detection is realized by probing the microwave transmission of a nonlinear resonator, based on a SQUID. Depending on the driving strength of the resonator, the detector can be operated in the monostable or the bistable mode. The bistable operation combines high-sensitivity with intrinsic latching. The measured contrast of Rabi oscillations is as high as 87 %; of the missing 13 %, only 3 % is unaccounted for. Experiments involving two consecutive detection pulses are consistent with preparation of the qubit state by the first measurement.

cond-mat.mes-hall↗

arXiv2004

Quantum state detection of a superconducting flux qubit using a DC-SQUID in the inductive mode

We present a readout method for superconducting flux qubits. The qubit quantum flux state can be measured by determining the Josephson inductance of an inductively coupled DC superconducting quantum interference device (DC-SQUID). We determine the response function of the DC-SQUID and its back-action on the qubit during measurement. Due to driving, the qubit energy relaxation rate depends on the spectral density of the measurement circuit noise at sum and difference frequencies of the qubit Larmor frequency and SQUID driving frequency. The qubit dephasing rate is proportional to the spectral density of circuit noise at the SQUID driving frequency. These features of the backaction are qualitatively different from the case when the SQUID is used in the usual switching mode. For a particular type of readout circuit with feasible parameters we find that single shot readout of a superconducting flux qubit is possible.

cond-mat.supr-con↗

arXiv2004

Nondestructive readout for a superconducting flux qubit

We present a new readout method for a superconducting flux qubit, based on the measurement of the Josephson inductance of a superconducting quantum interference device that is inductively coupled to the qubit. The intrinsic flux detection efficiency and back-action are suitable for a fast and nondestructive determination of the quantum state of the qubit, as needed for readout of multiple qubits in a quantum computer. We performed spectroscopy of a flux qubit and we measured relaxation times of the order of 80 $μs$.

cond-mat.supr-con↗