Searcharxiv⌕ Search

arXiv subjects

A. M. Di Giorgio

Publications and source records attributed to A. M. Di Giorgio.

At least 19 recordsLinked to original sources

Euclid preparation CIX. Baryon acoustic oscillation analysis of photometric galaxy clustering in configuration space

With about 1.5 billion galaxies expected to be observed, the very large number of objects in the Euclid photometric survey will allow for precise studies of galaxy clustering from a single survey, over a large range of redshifts $0.2 < z < 2.5$. In this work, we use photometric redshifts to extract the baryon acoustic oscillation signal (BAO) from the Flagship galaxy mock catalogue with a tomographic approach to constrain the evolution of the Universe and infer its cosmological parameters. We measured the two-point angular correlation function in 13 redshift bins. A template-fitting approach was applied to the measurement to extract the shift of the BAO peak through the transverse Alcock-Paczynski parameter $α$. A joint analysis of all redshift bins was performed to constrain $α$ at the effective redshift $z_\mathrm{eff}=0.77$ with MCMC and profile likelihood techniques. We also extracted one $α_i$ parameter per redshift bin to quantify its evolution as a function of time. From these 13 $α_i$, which are directly proportional to the ratio $D_\mathrm{A}/r_\mathrm{d}$, we constrain the product $h\,r_\mathrm{d}$ and $Ω_\mathrm{m}$. From the joint analysis, we constrain $D_\mathrm{A}/r_\mathrm{d}=10.764^{+0.0839}_{-0.0849}$, a three-fold improvement over current constraints from the Dark Energy Survey. As expected, the constraining power in the analysis of each redshift bin is lower, with an uncertainty ranging from $\pm\,1.23$ to $\pm\,0.289$. From these results, we constrain $Ω_\mathrm{m}=0.296^{+0.074}_{-0.059}$ and $h\,r_\mathrm{d}=99.35^{+4.29}_{-4.55}\,\mathrm{Mpc}$. We quantify the influence of analysis choices such as the template, scale cuts, redshift bins, and systematic effects such as redshift-space distortions, over our constraints, both at the level of the extracted $α_i$ parameters and at the level of cosmological inference.

astro-ph.CO↗

Euclid Quick Data Release (Q1). The first Euclid view of Planck galaxy protocluster candidates at cosmic noon

[ABRIGED ABSTRACT] A large catalogue of candidate galaxy protoclusters with high star-formation rates was produced by the Planck collaboration. We search, in the first data release (Q1) of the Euclid survey, for the visible and infrared counterparts of the Planck galaxy protocluster candidates expected to be above $z > 1.5$. Eight of them are in Euclid Q1. Our goal is to investigate the optical nature of these overdensities previously detected in the submillimetre wavelength range. We search for overdensities using the DETECTIFz algorithm, an overdensity finder based on Delaunay tessellation that uses photometric redshift probability distributions through Monte Carlo simulations. Focusing our search on the eight high-star forming Planck protocluster candidates, we find that two of them have one Euclid counterpart, and six have between two and four Euclid counterparts, which amounts to a total of 20 Euclid counterparts. These Euclid counterparts lie at photometric redshifts $1.4<z_{\rm ph} < 2.7$ and 12 of them also have partial Herschel coverage. All detections have also been confirmed by at least one other independent protocluster detection algorithm. We study the colours, derived stellar masses and star-formation rates (SFRs) of the detected member galaxies of those protocluster candidate counterparts. We also estimate the total stellar masses, SFRs, and the halo mass lower limits for all Euclid protocluster candidates. We find that in the dark matter halo mass ($M_{\rm h}$) / redshift plane, these Planck and Euclid overdense regions lie in the region $12.6 <\log_{10} (M_{\rm h}/M_\odot)< 13.4$, $1.4<z< 2.7$. This means that the halos of our objects are expected to have experienced a transition between cold flows in hot media to accretion of hot material.

astro-ph.CO↗

Euclid preparation. XCV. Cosmology Likelihood for Observables in Euclid (CLOE). 2. Code implementation

We provide a description of the code implementation and structure of Cosmology Likelihood for Observables in Euclid (CLOE), developed by members of the Euclid Consortium. CLOE is a modular Python code for computing the theoretical predictions of cosmological observables and evaluating them against state-of-the-art data from galaxy surveys such as Euclid in a unified likelihood. This primarily includes the core observables of weak gravitational lensing, photometric galaxy clustering, galaxy-galaxy lensing, and spectroscopic galaxy clustering, but also extended probes such as the clusters of galaxies and cross-correlations of galaxy positions and shapes with the cosmic microwave background. While CLOE has been developed to serve as the unified framework for the parameter inferences in Euclid, it has general capabilities that can serve the broader cosmological community. It is different from other comparable cosmological tools in that it is written entirely in Python, performs the full likelihood calculation, and includes both photometric and spectroscopic observables. We focus on the primary probes of Euclid and describe the overall code structure, rigorous code development practices, extensive documentation, unique features, speed optimization, and future development plans. CLOE is publicly available at https://github.com/cloe-org/cloe.

astro-ph.CO↗

Euclid preparation XCVII. Cosmology Likelihood for Observables in Euclid (CLOE). 4: Validation and performance

The Euclid satellite will provide data on the clustering of galaxies and on the distortion of their measured shapes, which can be used to constrain and test the cosmological model. However, the increase in precision places strong requirements on the accuracy of the theoretical modelling for the observables and of the full analysis pipeline. In this paper, we investigate the accuracy of the calculations performed by the Cosmology Likelihood for Observables in Euclid (CLOE), a software able to handle both the modelling of observables and their fit against observational data for both the photometric and spectroscopic surveys of Euclid, by comparing the output of CLOE with external codes used as benchmark. We perform such a comparison on the quantities entering the calculations of the observables, as well as on the final outputs of these calculations. Our results highlight the high accuracy of CLOE when comparing its calculation against external codes for Euclid observables on an extended range of operative cases. In particular, all the summary statistics of interest always differ less than $0.1\,σ$ from the chosen benchmark, and CLOE predictions are statistically compatible with simulated data obtained from benchmark codes. The same holds for the comparison of correlation function in configuration space for spectroscopic and photometric observables.

astro-ph.CO↗

Euclid: Optimising tomographic redshift binning for 3$\times$2pt power spectrum constraints on dark energy

We present a simulation-based method to explore the optimum tomographic redshift binning strategy for 3x2pt analyses with Euclid, focusing on the expected configuration of its first major data release (DR1). To do this, we 1) simulate a Euclid-like observation and generate mock shear catalogues from multiple realisations of the 3x2pt fields on the sky, and 2) measure the 3x2pt Pseudo-Cl power spectra for a given tomographic configuration and derive the constraints that they place on the standard dark energy equation of state parameters (w0, wa). For a simulation including Gaussian-distributed photometric redshift uncertainty and shape noise under a LambdaCDM cosmology, we find that bins equipopulated with galaxies yield the best constraints on (w0, wa) for an analysis of the full 3x2pt signal, or the angular clustering component only. For the cosmic shear component, the optimum (w0, wa) constraints are achieved by bins equally spaced in fiducial comoving distance. However, the advantage with respect to alternative binning choices is only a few percent in the size of the $1\,σ\,$(w0, wa) contour, and we conclude that the cosmic shear is relatively insensitive to the binning methodology. We find that the information gain extracted on (w0, wa) for any 3x2pt component starts to saturate at $\gtrsim$ 7-8 bins. Any marginal gains resulting from a greater number of bins is likely to be limited by additional uncertainties present in a real measurement, and the increasing demand for accuracy of the covariance matrix. Finally, we consider a 5% contamination from catastrophic photometric redshift outliers and find that, if these errors are not mitigated in the analysis, the bias induced in the 3x2pt signal for 10 equipopulated bins results in dark energy constraints that are inconsistent with the fiducial LambdaCDM cosmology at $>5\,σ$.

astro-ph.CO↗

Euclid Quick Data Release (Q2) -- The Euclid Galactic Bulge Survey

The Euclid Quick Data Release Q2 provides an unprecedented deep, wide-field, high-angular-resolution view of the inner Galactic bulge through the Euclid Galactic Bulge Survey (EGBS). Nine contiguous fields covering 4.8 deg$^2$ were observed with the VIS instrument over 24 hours in March 2025. Unlike the nominal Euclid survey strategy, the EGBS employed 16 dithered exposures of 400 s each, corresponding to a total integration time of 1.8 hours per field. Dedicated calibration observations were obtained to derive point spread functions (PSFs). The primary objective of the EGBS is gravitational microlensing, with high-angular-resolution imaging enabling lens-mass measurements to better than 10%. The survey provides an optical reference dataset for previously discovered microlensing events and future observations of the Galactic bulge. The Q2 data were processed with the VIS-PF pipeline. The non-standard observing strategy required dedicated calibration products, while the extreme stellar density necessitated modifications to the astrometric calibration and cosmic-ray detection procedures. These improvements have since been incorporated into later pipeline versions. We describe the motivation, observing strategy, data processing, products, and first results of the EGBS. Astrometric residuals with respect to the Gaia DR3 catalogue are 5.5 mas in right ascension and 4.4 mas in declination across the survey area, while the photometric zero points are calibrated to 1.5%. The Q2 release includes calibrated single-dither images, dedicated PSF models, and photometric catalogues containing approximately 45 million detected sources per dither down to AB magnitude 26. Although incomplete because of extreme crowding, these products provide a robust astrometric and photometric foundation for future exploitation of the dataset.

astro-ph.GA↗

Euclid Quick Data Release (Q1). The role of cosmic connectivity in shaping galaxy clusters

The matter distribution around galaxy clusters is distributed over several filaments, reflecting their positions as nodes in the large-scale cosmic web. The number of filaments connected to a cluster, namely its connectivity, is expected to affect the physical properties of clusters. Using the first Euclid galaxy catalogue from the Euclid Quick Release 1 (Q1), we investigate the connectivity of galaxy clusters and how it correlates with their physical and galaxy member properties. Around 220 clusters located within the three fields of Q1 (covering $\sim 63 \ \text{deg}^2$), are analysed in the redshift range $0.2 < z < 0.7$. Due to the photometric redshift uncertainty, we reconstruct the cosmic web skeleton, and measure cluster connectivity, in 2-D projected slices with a thickness of 170 comoving $h^{-1}.\text{Mpc}$ and centred on each cluster redshift, by using two different filament finder algorithms on the most massive galaxies ($M_*\ > 10^{10.3} \ M_\odot$). In agreement with previous measurements, we recover the mass-connectivity relation independently of the filament detection algorithm, showing that the most massive clusters are, on average, connected to a larger number of cosmic filaments, consistent with hierarchical structure formation models. Furthermore, we explore possible correlations between connectivities and two cluster properties: the fraction of early-type galaxies and the Sérsic index of galaxy members. Our result suggests that the clusters populated by early-type galaxies exhibit higher connectivity compared to clusters dominated by late-type galaxies. These preliminary investigations highlight our ability to quantify the impact of the cosmic web connectivity on cluster properties with Euclid.

astro-ph.CO↗

Euclid preparation. XCVI. Cosmology Likelihood for Observables in Euclid (CLOE). 3. Inference and Forecasts

The Euclid mission aims to measure the positions, shapes, and redshifts of over a billion galaxies to provide unprecedented constraints on the nature of dark matter and dark energy. Achieving this goal requires a continuous reassessment of the mission's scientific performance, particularly in terms of its ability to constrain cosmological parameters, as our understanding of how to model large-scale structure observables improves. In this study, we present the first scientific forecasts using CLOE (Cosmology Likelihood for Observables in Euclid), a dedicated Euclid cosmological pipeline developed to support this endeavour. Using advanced Bayesian inference techniques applied to synthetic Euclid-like data, we sample the posterior distribution of cosmological and nuisance parameters across a variety of cosmological models and Euclid primary probes: cosmic shear, angular photometric galaxy clustering, galaxy-galaxy lensing, and spectroscopic galaxy clustering. We validate the capability of CLOE to produce reliable cosmological forecasts, showcasing Euclid's potential to achieve a figure of merit for the dark energy parameters $w_0$ and $w_a$ exceeding 400 when combining all primary probes. Furthermore, we illustrate the behaviour of the posterior probability distribution of the parameters of interest given different priors and scale cuts. Finally, we emphasise the importance of addressing computational challenges, proposing further exploration of innovative data science techniques to efficiently navigate the Euclid high-dimensional parameter space in upcoming cosmological data releases.

astro-ph.CO↗

Euclid: Galaxy morphology and photometry from bulge-disc decomposition of Early Release Observations

The background galaxies in Euclid ERO images of the Perseus cluster make up a remarkable sample in its combination of 0.57 deg$^2$ area, 25.3 and 23.2 AB mag depth, as well as 0.1" and 0.3" angular resolutions, in optical and near-IR bands, respectively. We perform a morphological analysis of 2445 and 12,786 galaxies with $I_E < 21$ and $I_E < 23$, respectively. We use single-Sérsic profiles and the sums of a Sérsic bulge and an exponential disc to model these galaxies with SourceXtractor++ and analyse their parameters in order to assess their consistencies and discrepancies. The fitted galaxies to $I_E < 21$ span the various Hubble types with ubiquitous bulge and disc components, and a bulge-to-total light ratio B/T taking all values from 0 to 1. The effective radius of the single-Sérsic profile is an intermediate estimate of galaxy size, between the bulge and disc effective radii, depending on B/T. The axis ratio of the single-Sérsic profile is higher than the disc axis ratio, increasingly so with B/T. The model impacts the photometry with -0.08 to 0.01 mag median systematic $I_E$ offsets between single-Sérsic and bulge+disc total magnitudes, and a 0.05 to 0.15 mag dispersion, from low to high B/T. We measure a median $0.3$ mag bulge-disc colour difference in rest-frame $M_g - M_i$ that originates from the disc-dominated galaxies, whereas bulge-dominated galaxies have similar median colours for their components. We also measure redder-inside disc colour gradients based on 5 to 10$\%$ systematic variations of disc effective radii between the optical and near-IR bands. This analysis demonstrates the usefulness and limitations of single-Sérsic profile modelling and the power of bulge-disc decomposition for characterising the morphology of lenticulars and spirals in Euclid images. We make available the catalogues of best-fit parameters for the morphological and SED fits.

astro-ph.GA↗

Euclid Quick Data Release (Q1): The evolution of the passive-density and morphology-density relations between $z=0.25$ and $z=1$

The extent to which the environment affects galaxy evolution has been under scrutiny by researchers for decades. With the first data from Euclid, we can begin to systematically study a wide range of environments and their effects as a function of redshift, using 63 deg2 of space-based data. In this paper, we present results from Euclid Q1, where we measured the passive-density and morphology-density relations in the redshift range z=0.25--1. We determined if a galaxy is passive using the specific star formation rate, and we classified the morphologies of galaxies using the Sersic index n and the u-r colours. We measured the local environmental density of each galaxy using the Nth-nearest neighbour method. We find that at a fixed stellar mass, the quenched fraction (the fraction of galaxies that have ceased star formation) increases with increasing local environmental density up to $z=1$. This result is indicative of the separability of the effects from the stellar mass and the environment. Similarly, at all redshifts in this work, the early-type galaxy fraction increases with increasing density at fixed stellar mass, meaning the environment also transforms the morphology of the galaxy independently of stellar mass, up to M_* < 10^10.8 Msol$. For M* > 10^10.8 Msol, almost all galaxies are early-types, with minimal impact from the environment. At z>0.75, the morphology depends mostly on stellar mass, with only low-mass galaxies being affected by the environment. Given that the morphology classifications use u-r colours, these are correlated to the star formation rate, and as such our morphology results should be taken with caution, yet future morphology classifications should help verify these results. To summarise, we successfully identify the passive-density and morphology-density relations at 0.25<z<1. Future Euclid data releases are key to confirm these trends at higher redshifts.

astro-ph.GA↗

Euclid preparation. The impact of redshift interlopers on the two-point correlation function analysis

The Euclid survey aims to measure the spectroscopic redshift of emission-line galaxies by identifying the H$\,α$ line in their slitless spectra. This method is sensitive to the signal-to-noise ratio of the line, as noise fluctuations or other strong emission lines can be misidentified as H$\,α$, depending on redshift. These effects lead to catastrophic redshift errors and the inclusion of interlopers in the sample. We forecast the impact of such redshift errors on galaxy clustering measurements. In particular, we study the effect of interloper contamination on the two-point correlation function (2PCF), the growth rate of structures, and the Alcock-Paczynski (AP) parameters. We analyze 1000 synthetic spectroscopic catalogues, the EuclidLargeMocks, designed to match the area and selection function of the Data Release 1 (DR1) sample. We estimate the 2PCF of the contaminated catalogues, isolating contributions from correctly identified galaxies and from interlopers. We explore different models with increasing complexity to describe the measured 2PCF at fixed cosmology. Finally, we perform a cosmological inference and evaluate the systematic error on the inferred $fσ_8$, $α_{\parallel}$ and $α_{\perp}$ values associated with different models. Our results demonstrate that a minimal modelling approach, which only accounts for an attenuation of the clustering signal regardless of the type of contaminants, is sufficient to recover the correct values of $fσ_8$, $α_{\parallel}$, and $α_{\perp}$ at DR1. The accuracy and precision of the estimated AP parameters are largely insensitive to the presence of interlopers. The adoption of a minimal model induces a 1%-3% systematic error on the growth rate of structure estimation, depending on the redshift. However, this error remains smaller than the statistical error expected for the Euclid DR1 analysis.

astro-ph.CO↗

Euclid Quick Data Release (Q1) -- Characteristics and limitations of the spectroscopic measurements

The SPE processing function (PF) of the \Euclid pipeline is dedicated to the automatic analysis of one-dimensional spectra to determine redshifts, line fluxes, and spectral classifications. The first \Euclid Quick Data Release (Q1) delivers these measurements for all $H_\mathrm{E}<22.5$ objects identified in the photometric survey. In this paper, we present an overview of the SPE PF algorithm and assess its performance by comparing its results with high-quality spectroscopic redshifts from the Dark Energy Spectroscopic Instrument (DESI) survey in the Euclid Deep Field North. Our findings highlight remarkable accuracy in successful redshift measurements, with a bias of less than $3 \times 10^{-5}$ in $(z_{\rm SPE}-z_{\rm DESI})/(1+z_{\rm DESI})$ and a high precision of approximately $10^{-3}$. The majority of spectra have only a single spectral feature or none at all. To avoid spurious detections, where noise features are misinterpreted as lines or lines are misidentified, it is therefore essential to apply well-defined criteria on quantities such as the redshift probability or the \ha\ flux and signal-to-noise ratio. Using a well-tuned quality selection, we achieve an 89\% redshift success rate in the target redshift range for cosmology ($0.9<z<1.8$), which is well covered by DESI for $z<1.6$. Outside this range where the \ha\ line is observable, redshift measurements are less reliable, except for sources showing specific spectral features (e.g., two bright lines or strong continuum). Ongoing refinements along the entire chain of PFs are expected to enhance both the redshift measurements and the spectral classification, allowing us to define the large and reliable sample required for cosmological analyses. Overall, the Q1 SPE results are promising, demonstrating encouraging potential for cosmology.

astro-ph.CO↗

Euclid Quick Data Release (Q1). LEMON -- Lens Modelling with Neural networks. Automated and fast modelling of Euclid gravitational lenses with a singular isothermal ellipsoid mass profile

The Euclid mission aims to survey around 14000 deg^{2} of extragalactic sky, providing around 10^{5} gravitational lens images. Modelling of gravitational lenses is fundamental to estimate the total mass of the lens galaxy, along with its dark matter content. Traditional modelling of gravitational lenses is computationally intensive and requires manual input. In this paper, we use a Bayesian neural network, LEns MOdelling with Neural networks (LEMON), to model Euclid gravitational lenses with a singular isothermal ellipsoid mass profile. Our method estimates key lens mass profile parameters, such as the Einstein radius, while also predicting the light parameters of foreground galaxies and their uncertainties. We validate LEMON's performance on both mock Euclid datasets, real lenses observed with Hubble Space Telescope (HST), and real Euclid lenses, demonstrating the ability of LEMON to predict parameters of both simulated and real lenses. Results show promising accuracy and reliability in predicting the Einstein radius, mass and light ellipticities, effective radius, Sérsic index, lens magnitude, and unlensed source position for simulated lens galaxies. The application to real data, including the latest Quick Release 1 strong lens candidates, provides encouraging results in the recovery of the parameters for real lenses. We also verified that LEMON has the potential to accelerate traditional modelling methods, by giving to the classical optimiser the LEMON predictions as starting points, resulting in a speed-up of up to 26 times the original time needed to model a sample of gravitational lenses, a result that would be impossible with randomly initialised guesses. This work represents a significant step towards efficient, automated gravitational lens modelling, which is crucial for handling the large data volumes expected from Euclid.

astro-ph.CO↗

Euclid Quick Data Release (Q1): VIS processing and data products

This paper describes the VIS Processing Function (VIS PF) of the Euclid ground segment pipeline, which processes and calibrates raw data from the VIS camera. We present the algorithms used in each processing element, along with a description of the on-orbit performance of VIS PF, based on Performance Verification (PV) and Q1 data. We demonstrate that the principal performance metrics (image quality, astrometric accuracy, photometric calibration) are within pre-launch specifications. The image-to-image photometric scatter is less than $0.8\%$, and absolute astrometric accuracy compared to Gaia is $5$ mas Image quality is stable over all Q1 images with a full width at half maximum (FWHM) of $0.\!^{\prime\prime}16$. The stacked images (combining four nominal and two short exposures) reach $I_\mathrm{E} = 25.6$ ($10σ$, measured as the variance of $1.\!^{\prime\prime}3$ diameter apertures). We also describe quality control metrics provided with each image, and an appendix provides a detailed description of the provided data products. The excellent quality of these images demonstrates the immense potential of Euclid VIS data for weak lensing. VIS data, covering most of the extragalactic sky, will provide a lasting high-resolution atlas of the Universe.

astro-ph.IM↗

Euclid preparation. Review of forecast constraints on dark energy and modified gravity

The Euclid mission has been designed to provide, as one of its main deliverables, information on the nature of the gravitational interaction, which determines the expansion of the Universe and the formation of structures. Thus, Euclid has the potential to test deviations from general relativity that will allow us to shed light on long-lasting problems in the standard cosmological model, $Λ$CDM. Euclid will mainly do this by using two complementary probes: weak gravitational lensing and galaxy clustering. In this paper we review pre-launch Euclid analyses for dark energy and modified gravity. These include forecast constraints with future Euclid data on cosmological parameters for different cosmological models, such as a time-varying dark energy component, phenomenological modifications of the perturbation sector and specific modified gravity models, with further extensions that include neutrino physics and the coupling to the electromagnetic sector through the fine-structure constant. We review the study of the impact of nonlinear clustering methods on beyond-$Λ$CDM constraints with Euclid. This is of fundamental importance to efficiently predict the large-scale clustering of matter and dark matter halos, given that we will have access to a wealth of information on scales beyond the linear regime. We inspect the extension of theoretical predictions for observable quantities in alternative cosmologies to $Λ$CDM at fully nonlinear scales by means of $N$-body simulations. We discuss the impact of relativistic corrections in extended cosmological models. Overall, this review highlights the significant potential of the Euclid mission to tightly constrain parameters of dark energy and modified gravity models, or perhaps to detect possible signatures of a $Λ$CDM failure.

astro-ph.CO↗

Euclid: The first statistical census of dusty and massive objects in the ERO/Perseus field

Our comprehension of the history of star formation at $z>3$ relies on rest-frame UV observations, yet this selection misses the most dusty and massive sources, yielding an incomplete census at early times. Infrared facilities such as Spitzer and the James Webb Space Telescope have revealed a hidden population at $z=3$-$6$ with extreme red colours, named HIEROs (HST-to-IRAC extremely red objects), identified by the criterion $H_{\mathrm{E}}-\mathrm{ch2}>2.25$. Recently, Euclid Early Release Observations (ERO) have made it possible to further study such objects by comparing Euclid data with ancillary Spitzer/IRAC imaging. We investigate a $232$ arcmin$^2$ area in the Perseus field using VIS and NISP photometry, complemented by the four Spitzer channels and ground-based MegaCam bands ($u$, $g$, $r$, ${\rm H}α$, $i$, $z$). Applying the colour cut yields $121$ HIEROs; after removing globular clusters, brown dwarfs, and unreliable cases through visual inspection of multiband cutouts, we obtain a final sample of $42$ robust HIEROs. Photometric redshifts and physical properties are estimated with the SED-fitting code Bagpipes. From the resulting $z_{\mathrm{phot}}$ and $M_*$ values, we compute the galaxy stellar mass function at $3.5<z<5.5$. Even after excluding possible AGN hosts or systems where the stellar mass may be overestimated, the high-mass end remains comparable to previous determinations, suggesting the true abundance could be higher. These results highlight the importance of further study of this obscured population to assess its role in the cosmic star-formation rate density and its consistency with galaxy-formation models, demonstrating Euclid's capability to advance our understanding of dust-hidden star formation across early epochs.

astro-ph.GA↗

Euclid Quick Data Release (Q1): Identification of massive galaxy candidates at the end of the Epoch of Reionisation

Probing the presence and properties of massive galaxies at high redshift is one of the most critical tests for galaxy formation models. In this work, we search for galaxies with stellar masses M* > 10^10.25 Msun at z in [5,7], i.e., towards the end of the Epoch of Reionisation, over a total of ~23 deg^2 in two of the Euclid Quick Data Release (Q1) fields: the Euclid Deep Field North and Fornax (EDF-N and EDF-F). In addition to the Euclid photometry, we incorporate Spitzer Infrared Camera (IRAC) and ground-based optical data to perform spectral energy distribution (SED) fitting, obtaining photometric redshifts and derived physical parameters. After applying rigorous selection criteria, we identify a conservative sample of 145 candidate massive galaxies with M* > 10^10.25 Msun at z in [5,7], including 5 objects with M* > 10^11 Msun. This makes for a surface density of about 6.3 deg^-2 at z in [5,7], which should be considered a lower limit because of the current depth of the Euclid data (H_E < 24, 5 sigma in Q1). We find that the inferred stellar masses are consistent with galaxy formation models with standard star-formation efficiencies. These massive galaxies have colour excess E(B-V) values up to 0.75, indicating significant dust attenuation in some of them. In addition, half of the massive galaxies have best-fit ages comparable to the age of the Universe at those redshifts, which suggests that their progenitors were formed very early in cosmic time. About 78% of the massive galaxies lie on the star-forming main sequence (MS) in the SFR-M* plane, ~12% are found in the starburst region, and 10% in the transition zone between the MS and starbursts. We find no significant evidence for outshining or AGN contamination that could account for the elevated specific star-formation rates (sSFR) observed in the ~12% of galaxies classified as starbursts.

astro-ph.GA↗

Euclid: Quick Data Release (Q1)- The connection between galaxy close encounters and radio activity

Using the large statistics provided by both Euclid and the LOFAR surveys, we present the first large-scale study of the connection between radio emission, its morphology, and the merging properties of the hosts of radio sources up to z=2. By dividing the radio sample into active galactic nuclei (AGN) and star-forming galaxies, we find that radio-emitting AGN show a clear preference to reside within galaxies undergoing a merging event. This is more significant for AGN that present extended and/or complex radio emission: indeed, about half of them are associated with merging systems, while only 15% are hosted by an isolated galaxy. The observed trend is primarily driven by AGN residing at z < 1, especially in the case of high - P144MHz > 10^24 W Hz-1 sr-1 - radio luminosities (60% in mergers versus 10% isolated regardless of radio appearance). The situation is reversed in the case of radio-emitting star-forming galaxies, which are preferentially associated with isolated systems. This is more significant as we move towards low radio-luminosity/star-formation objects (P144MHz < 10^23 W Hz-1 sr-1) for which we find 40% in isolated systems versus 20% in mergers. These values hold regardless of redshift. We interpret the above result for AGN with their need to accrete outer gas from local encounters in order to trigger (radio) activity, especially in the case of extended radio emission such as hot-spots and lobes. This is mostly observed at z < 1, since in the local Universe galaxies are more gas deprived than their higher-redshift counterparts. Internal gas reservoirs instead seem sufficient to trigger star formation within the majority of galaxies, which indeed prefer to be associated with isolated systems at all redshifts probed. (abridged)

astro-ph.GA↗