Searcharxiv⌕ Search

arXiv subjects

A. M. Veronig

Publications and source records attributed to A. M. Veronig.

At least 55 records · Page 3Linked to original sources

Formation of Coronal Shock Waves

Numerical simulations of magnetosonic wave formation driven by an expanding cylindrical piston are performed to get better physical insight into the initiation and evolution of large-scale coronal waves. Several very basic initial configurations are employed to analyze intrinsic characteristics of the MHD wave formation that do not depend on specific properties of the environment. It turns out that these simple initial configurations result in piston/wave morphologies and kinematics that reproduce common characteristics of coronal waves. In the initial stage the wave and the expanding source-region cannot be clearly resolved. During the acceleration stage of the source-region inflation, the wave is driven by the piston expansion, so its amplitude and phase-speed increase, whereas the wavefront profile steepens. At a given point, a discontinuity forms in the wavefront profile. The time/distance required for the shock formation is shorter for a more impulsive source-region expansion. After the piston stops, the wave amplitude and phase-speed start decreasing. During the expansion, most of the source region becomes strongly rarified, which reproduces the coronal dimming left behind the eruption. On the other hand, the density increases at the source-region boundary, and stays enhanced even after the expansion stops, which might explain stationary brightenings that are sometimes observed at the edges of the erupted coronal structure. In addition, in the rear of the wave a weak density depletion develops, trailing the wave, which is sometimes observed as weak transient coronal dimming. Finally, we find a well defined relationship between the impulsiveness of the source-region expansion and the wave amplitude and phase speed. The results for the cylindrical piston are also compared with the outcome for a planar wave, to find out how different geometries affect the evolution of the wave.

astro-ph.SR↗

Multi-point shock and flux rope analysis of multiple interplanetary coronal mass ejections around 2010 August 1 in the inner heliosphere

We present multi-point in situ observations of a complex sequence of coronal mass ejections (CMEs) which may serve as a benchmark event for numerical and empirical space weather prediction models. On 2010 August 1, instruments on various space missions (Solar Dynamics Observatory/ Solar and Heliospheric Observatory/Solar-TErrestrial-RElations-Observatory) monitored several CMEs originating within tens of degrees from solar disk center. We compare their imprints on four widely separated locations, spanning 120 degree in heliospheric longitude, with radial distances from the Sun ranging from MESSENGER (0.38 AU) to Venus Express (VEX, at 0.72 AU) to Wind, ACE and ARTEMIS near Earth, and STEREO-B close to 1 AU. Calculating shock and flux rope parameters at each location points to a non-spherical shape of the shock, and shows the global configuration of the interplanetary coronal mass ejections (ICMEs), which have interacted, but do not seem to have merged. VEX and STEREO-B observed similar magnetic flux ropes (MFRs), in contrast to structures at Wind. The geomagnetic storm was intense, reaching two minima in the Dst index (~ -100 nT), caused by the sheath region behind the shock and one of two observed MFRs. MESSENGER received a glancing blow of the ICMEs, and the events missed STEREO-A entirely. The observations demonstrate how sympathetic solar eruptions may immerse at least 1/3 of the heliosphere in the ecliptic with their distinct plasma and magnetic field signatures. We also emphasize the difficulties in linking the local views derived from single-spacecraft observations to a consistent global picture, pointing to possible alterations from the classical picture of ICMEs.

astro-ph.SR↗

The Wave-Driver System of the Off-Disk Coronal Wave 17 January 2010

We study the 17 January 2010 flare-CME-wave event by using STEREO/SECCHI EUVI and COR1 data. The observational study is combined with an analytic model which simulates the evolution of the coronal-wave phenomenon associated with the event. From EUV observations, the wave signature appears to be dome shaped having a component propagating on the solar surface (v~280 km s-1) as well as off-disk (v~600 km s-1) away from the Sun. The off-disk dome of the wave consists of two enhancements in intensity, which conjointly develop and can be followed up to white-light coronagraph images. Applying an analytic model, we derive that these intensity variations belong to a wave-driver system with a weakly shocked wave, initially driven by expanding loops, which are indicative of the early evolution phase of the accompanying CME. We obtain the shock standoff distance between wave and driver from observations as well as from model results. The shock standoff distance close to the Sun (<0.3 Rs above the solar surface) is found to rapidly increase with values of ~0.03-0.09 Rs which give evidence of an initial lateral (over-)expansion of the CME. The kinematical evolution of the on-disk wave could be modeled using input parameters which require a more impulsive driver (t=90 s, a=1.7 km s-2) compared to the off-disk component (t=340 s, a=1.5 km s-2).

astro-ph.SR↗

Impulsive acceleration of coronal mass ejections: II. Relation to SXR flares and filament eruptions

Using high time cadence images from the STEREO EUVI, COR1 and COR2 instruments, we derived detailed kinematics of the main acceleration stage for a sample of 95 CMEs in comparison with associated flares and filament eruptions. We found that CMEs associated with flares reveal on average significantly higher peak accelerations and lower acceleration phase durations, initiation heights and heights, at which they reach their peak velocities and peak accelerations. This means that CMEs that are associated with flares are characterized by higher and more impulsive accelerations and originate from lower in the corona where the magnetic field is stronger. For CMEs that are associated with filament eruptions we found only for the CME peak acceleration significantly lower values than for events which were not associated with filament eruptions. The flare rise time was found to be positively correlated with the CME acceleration duration, and negatively correlated with the CME peak acceleration. For the majority of the events the CME acceleration starts before the flare onset (for 75% of the events) and the CME accleration ends after the SXR peak time (for 77% of the events). In ~60% of the events, the time difference between the peak time of the flare SXR flux derivative and the peak time of the CME acceleration is smaller than \pm5 min, which hints at a feedback relationship between the CME acceleration and the energy release in the associated flare due to magnetic reconnection.

astro-ph.SR↗

CME acceleration and non-thermal flare characteristics

We investigate the relationship between the main acceleration phase of coronal mass ejections (CMEs) and the particle acceleration in the associated flares as evidenced in RHESSI non-thermal X-rays for a set of 37 impulsive flare-CME events. CME peak velocity and peak acceleration yield distinct correlations with various parameters characterizing the flare-accelerated electron spectra. The highest correlation coefficient is obtained for the relation of the CME peak velocity and the total energy in accelerated electrons (c = 0.85), supporting the idea that the acceleration of the CME and the particle acceleration in the associated flare draw their energy from a common source, probably magnetic reconnection in the current sheet behind the erupting structure. In general, the CME peak velocity shows somewhat higher correlations with the non-thermal flare parameters than the CME peak acceleration, except for the spectral index of the accelerated electron spectrum which yields a higher correlation with the CME peak acceleration (c = -0.6), indicating that the hardness of the flare-accelerated electron spectrum is tightly coupled to the impulsive acceleration process of the rising CME structure. We also obtained high correlations between the CME initiation height $h_0$ and the non-thermal flare parameters, with the highest correlation of $h_0$ to the spectral index of flare-accelerated electrons (c = 0.8). This means that CMEs erupting at low coronal heights, i.e.\ in regions of stronger magnetic fields, are accompanied with flares which are more efficient to accelerate electrons to high energies. In the majority of events (80%), the non-thermal flare emission starts after the CME acceleration (6 min), giving a current sheet length at the onset of magnetic reconnection of 21 \pm 7 Mm. The flare HXR peaks are well synchronized with the peak of the CME acceleration profile.

astro-ph.SR↗

Constraining the Kinematics of Coronal Mass Ejections in the Inner Heliosphere with In-Situ Signatures

We present a new approach to combine remote observations and in situ data by STEREO/HI and Wind, respectively, to derive the kinematics and propagation directions of interplanetary coronal mass ejections (ICMEs). We used two methods, Fixed-Phi and Harmonic Mean, to convert ICME elongations into distance, and constrained the ICME direction such that the ICME distance-time and velocity-time profiles are most consistent with in situ measurements of the arrival time and velocity. The derived velocity-time functions from the Sun to 1 AU for the three events under study (1-6 June 2008, 13-18 February 2009, 3-5 April 2010) do not show strong differences for the two extreme geometrical assumptions of a wide ICME with a circular front (Harmonic Mean) or an ICME of small spatial extent in the ecliptic (Fixed-Phi). Due to the geometrical assumptions, Harmonic Mean delivers the propagation direction further away from the observing spacecraft with a mean difference of ~25 degree.

astro-ph.SR↗

Plasma diagnostics of an EIT wave observed by Hinode/EIS and SDO/AIA

We present plasma diagnostics of an EIT wave observed with high cadence in Hinode/EIS sit-and-stare spectroscopy and SDO/AIA imagery obtained during the HOP-180 observing campaign on 2011 February 16. At the propagating EIT wave front, we observe downward plasma flows in the EIS Fe XII, Fe XIII, and Fe XVI spectral lines (log T ~ 6.1-6.4) with line-of-sight (LOS) velocities up to 20 km/s. These red-shifts are followed by blue-shifts with upward velocities up to -5 km/s indicating relaxation of the plasma behind the wave front. During the wave evolution, the downward velocity pulse steepens from a few km/s up to 20 km/s and subsequently decays, correlated with the relative changes of the line intensities. The expected increase of the plasma densities at the EIT wave front estimated from the observed intensity increase lies within the noise level of our density diagnostics from EIS XIII 202/203 AA line ratios. No significant LOS plasma motions are observed in the He II line, suggesting that the wave pulse was not strong enough to perturb the underlying chromosphere. This is consistent with the finding that no Halpha Moreton wave was associated with the event. The EIT wave propagating along the EIS slit reveals a strong deceleration of a ~ -540 m/s2 and a start velocity of v0 ~ 590 km/s. These findings are consistent with the passage of a coronal fast-mode MHD wave, pushing the plasma downward and compressing it at the coronal base.

astro-ph.SR↗

Coronal Dimmings and the Early Phase of a CME Observed with STEREO and Hinode/EIS

We investigate the early phase of the 13 February 2009 coronal mass ejection (CME). Observations with the twin STEREO spacecraft in quadrature allow us to compare for the first time in one and the same event the temporal evolution of coronal EUV dimmings, observed simultaneously on-disk and above the limb. We find that these dimmings are synchronized and appear during the impulsive acceleration phase of the CME, with the highest EUV intensity drop occurring a few minutes after the maximum CME acceleration. During the propagation phase two confined, bipolar dimming regions, appearing near the footpoints of a pre-flare sigmoid structure, show an apparent migration away from the site of the CME-associated flare. Additionally, they rotate around the 'center' of the flare site, i.e., the configuration of the dimmings exhibits the same 'sheared-to-potential' evolution as the postflare loops. We conclude that the motion pattern of the twin dimmings reflects not only the eruption of the flux rope, but also the ensuing stretching of the overlying arcade. Finally, we find that: (1) the global-scale dimmings, expanding from the source region of the eruption, propagate with a speed similar to that of the leaving CME front; (2) the mass loss occurs mainly during the period of strongest CME acceleration. Two hours after the eruption Hinode/EIS observations show no substantial plasma outflow, originating from the 'open' field twin dimming regions.

astro-ph.SR↗

Impulsive acceleration of coronal mass ejections: I. Statistics and CME source region characteristics

We use high time cadence images acquired by the STEREO EUVI and COR instruments to study the evolution of coronal mass ejections (CMEs), from their initiation, through the impulsive acceleration to the propagation phase. For a set of 95 CMEs we derived detailed height, velocity and acceleration profiles and statistically analysed characteristic CME parameters: peak acceleration, peak velocity, acceleration duration, initiation height, height at peak velocity, height at peak acceleration and size of the CME source region. The CME peak accelerations derived range from 20 to 6800 m s^2 and are inversely correlated to the acceleration duration and to the height at peak acceleration. 74% of the events reach their peak acceleration at heights below 0.5 Rsun. CMEs which originate from compact sources low in the corona are more impulsive and reach higher peak accelerations at smaller heights. These findings can be explained by the Lorentz force, which drives the CME accelerations and decreases with height and CME size.

astro-ph.SR↗

Arrival time calculation for interplanetary coronal mass ejections with circular fronts and application to STEREO observations of the 2009 February 13 eruption

A goal of the NASA STEREO mission is to study the feasibility of forecasting the direction, arrival time and internal structure of solar coronal mass ejections (CMEs) from a vantage point outside the Sun-Earth line. Through a case study, we discuss the arrival time calculation of interplanetary CMEs (ICMEs) in the ecliptic plane using data from STEREO/SECCHI at large elongations from the Sun in combination with different geometric assumptions about the ICME front shape (Fixed-Φ(FP): a point and harmonic Mean (HM): a circle). These forecasting techniques use single-spacecraft imaging data and are based on the assumptions of constant velocity and direction. We show that for the slow (350 km/s) ICME on 2009 February 13-18, observed at quadrature by the two STEREO spacecraft, the results for the arrival time given by the HM approximation are more accurate by 12 hours than those for FP in comparison to in situ observations of solar wind plasma and magnetic field parameters by STEREO/IMPACT/PLASTIC, and by 6 hours for the arrival time at Venus Express (MAG). We propose that the improvement is directly related to the ICME front shape being more accurately described by HM for an ICME with a low inclination of its symmetry axis to the ecliptic. In this case the ICME has to be tracked to > 30° elongation to get arrival time errors < 5 hours. A newly derived formula for calculating arrival times with the HM method is also useful for a triangulation technique assuming the same geometry.

astro-ph.SR↗

Analysis of characteristic parameters of large-scale coronal waves observed by STEREO/EUVI

The kinematical evolution of four EUV waves, well observed by the Extreme UltraViolet Imager (EUVI) onboard the Solar-Terrestrial Relations Observatory (STEREO), is studied by visually tracking the wave fronts as well as by a semiautomatized perturbation profile method leading to results matching each other within the error limits. The derived mean velocities of the events under study lie in the range of 220-350 km/s. The fastest of the events (May 19, 2007) reveals a significant deceleration of \approx -190 m s-2 while the others are consistent with a constant velocity during the wave propagation. The evolution of the maximum intensity values reveals initial intensification by 20 up to 70%, and decays to original levels within 40-60 min, while the width at half maximum and full maximum of the perturbation profiles are broadening by a factor of 2 - 4. The integral below the perturbation profile remains basically constant in two cases, while it shows a decrease by a factor of 3 - 4 in the other two cases. From the peak perturbation amplitudes we estimate the corresponding magnetosonic Mach numbers Mms which are in the range of 1.08-1.21. The perturbation profiles reveal three distinct features behind the propagating wave fronts: coronal dimmings, stationary brightenings and rarefaction regions. All of them appear after the wave passage and are only slowly fading away. Our findings indicate that the events under study are weak shock fast-mode MHD waves initiated by the CME lateral expansion.

astro-ph.SR↗

Relation between the 3D-geometry of the coronal wave and associated CME during the 26 April 2008 event

We study the kinematical characteristics and 3D geometry of a large-scale coronal wave that occurred in association with the 26 April 2008 flare-CME event. The wave was observed with the EUVI instruments aboard both STEREO spacecraft (STEREO-A and STEREO-B) with a mean speed of ~240 km/s. The wave is more pronounced in the eastern propagation direction, and is thus, better observable in STEREO-B images. From STEREO-B observations we derive two separate initiation centers for the wave, and their locations fit with the coronal dimming regions. Assuming a simple geometry of the wave we reconstruct its 3D nature from combined STEREO-A and STEREO-B observations. We find that the wave structure is asymmetric with an inclination towards East. The associated CME has a deprojected speed of ~750+/-50 km/s, and shows a non-radial outward motion towards the East with respect to the underlying source region location. Applying the forward fitting model developed by Thernisien, Howard, and Vourlidas (2006), we derive the CME flux rope position on the solar surface to be close to the dimming regions. We conclude that the expanding flanks of the CME most likely drive and shape the coronal wave.

astro-ph.SR↗

Case Study of Four Homologous Large-Scale Coronal Waves Observed on 2010 April 28 and 29

On 2010 April 28 and 29, the Solar TErrestrial Relations Observatory B/Extreme Ultraviolet Imager observed four homologous large-scale coronal waves, the so-called EIT-waves, within 8 hr. All waves emerged from the same source active region, were accompanied by weak flares and faint coronal mass ejections, and propagated into the same direction at constant velocities in the range of ~220-340 km s-1. The last of these four coronal wave events was the strongest and fastest, with a velocity of 337 +/- 31 km s-1 and a peak perturbation amplitude of ~1.24, corresponding to a magnetosonic Mach number of Mms ~ 1.09. The magnetosonic Mach numbers and velocities of the four waves are distinctly correlated, suggestive of the nonlinear fast-mode magnetosonic wave nature of the events. We also found a correlation between the magnetic energy buildup times and the velocity and magnetosonic Mach number.

astro-ph.SR↗

Multiwavelength imaging and spectroscopy of chromospheric evaporation in an M-class solar flare

We study spectroscopic observations of chromospheric evaporation mass flows in comparison to the energy input by electron beams derived from hard X-ray data for the white-light M2.5 flare of 2006 July 6. The event was captured in high cadence spectroscopic observing mode by SOHO/CDS combined with high-cadence imaging at various wavelengths in the visible, EUV and X-ray domain during the joint observing campaign JOP171. During the flare peak, we observe downflows in the He\,{\sc i} and O\,{\sc v} lines formed in the chromosphere and transition region, respectively, and simultaneous upflows in the hot coronal Si~{\sc xii} line. The energy deposition rate by electron beams derived from RHESSI hard X-ray observations is suggestive of explosive chromospheric evaporation, consistent with the observed plasma motions. However, for a later distinct X-ray burst, where the site of the strongest energy deposition is exactly located on the CDS slit, the situation is intriguing. The O\,{\sc v} transition region line spectra show the evolution of double components, indicative of the superposition of a stationary plasma volume and upflowing plasma elements with high velocities (up to 280~km~s$^{-1}$) in single CDS pixels on the flare ribbon. However, the energy input by electrons during this period is too small to drive explosive chromospheric evaporation. These unexpected findings indicate that the flaring transition region is much more dynamic, complex, and fine-structured than is captured in single-loop hydrodynamic simulations.

astro-ph.SR↗

First observations of a dome-shaped large-scale coronal EUV wave

We present first observations of a dome-shaped large-scale EUV coronal wave, recorded by the EUVI instrument onboard STEREO-B on January 17, 2010. The main arguments that the observed structure is the wave dome (and not the CME) are: a) the spherical form and sharpness of the dome's outer edge and the erupting CME loops observed inside the dome; b) the low-coronal wave signatures above the limb perfectly connecting to the on-disk signatures of the wave; c) the lateral extent of the expanding dome which is much larger than that of the coronal dimming; d) the associated high-frequency type II burst indicating shock formation low in the corona. The velocity of the upward expansion of the wave dome ($v \sim 650$ km s$^{-1}$) is larger than that of the lateral expansion of the wave ($v \sim 280$ km s$^{-1}$), indicating that the upward dome expansion is driven all the time, and thus depends on the CME speed, whereas in the lateral direction it is freely propagating after the CME lateral expansion stops. We also examine the evolution of the perturbation characteristics: First the perturbation profile steepens and the amplitude increases. Thereafter, the amplitude decreases with r$^{-2.5 \pm 0.3}$, the width broadens, and the integral below the perturbation remains constant. Our findings are consistent with the spherical expansion and decay of a weakly shocked fast-mode MHD wave.

astro-ph.SR↗

Combined STEREO/RHESSI study of CME acceleration and particle acceleration in solar flares

Using the potential of two unprecedented missions, STEREO and RHESSI, we study three well observed fast CMEs that occurred close to the limb together with their associated high energy flare emissions in terms of RHESSI HXR spectra and flux evolution. From STEREO/EUVI and STEREO/COR1 data the full CME kinematics of the impulsive acceleration phase up to 4 Rs is measured with a high time cadence of less equal 2.5 min. For deriving CME velocity and acceleration we apply and test a new algorithm based on regularization methods. The CME maximum acceleration is achieved at heights h < 0.4 Rs, the peak velocity at h < 2.1 Rs (in one case as small as 0.5 Rs). We find that the CME acceleration profile and the flare energy release as evidenced in the RHESSI hard X-ray flux evolve in a synchronized manner. These results support the standard flare/CME model which is characterized by a feed-back relationship between the large-scale CME acceleration process and the energy release in the associated flare.

astro-ph.SR↗

Analysis of a global Moreton wave observed on October 28, 2003

We study the well pronounced Moreton wave that occurred in as- sociation with the X17.2 are/CME event of October 28, 2003. This Moreton wave is striking for its global propagation and two separate wave centers, which implies that two waves were launched simultane- ously. The mean velocity of the Moreton wave, tracked within different sectors of propagation direction, lies in the range of v ~ 900-1100 km/s with two sectors showing wave deceleration. The perturbation profile analysis of the wave indicates amplitude growth followed by amplitude weakening and broadening of the perturbation profile, which is con- sistent with a disturbance first driven and then evolving into a freely propagating wave. The EIT wavefront is found to lie on the same kinematical curve as the Moreton wavefronts indicating that both are different signatures of the same physical process. Bipolar coronal dim- mings are observed on the same opposite East-West edges of the active region as the Moreton wave ignition centers. The radio type II source, which is co-spatially located with the first wave front, indicates that the wave was launched from an extended source region (& 60 Mm). These findings suggest that the Moreton wave is initiated by the CME expanding flanks.

astro-ph.SR↗

Temporal comparison of nonthermal flare emission and magnetic-flux change rates

To test the standard flare model (CSHKP-model), we measured the magnetic-flux change rate in five flare events of different GOES classes using chromospheric/photospheric observations and compared its progression with observed nonthermal flare emission. We calculated the cumulated positive and negative magnetic flux participating in the reconnection process, as well as the total reconnection flux. Finally, we investigated the relations between the total reconnection flux, the GOES class of the events, and the linear velocity of the flare-associated CMEs. Using high-cadence H-alpha and TRACE 1600 A image time-series data and MDI/SOHO magnetograms, we measured the required observables (newly brightened flare area and magnetic-field strength inside this area). RHESSI and INTEGRAL hard X-ray time profiles in nonthermal energy bands were used as observable proxies for the flare-energy release rate. We detected strong temporal correlations between the derived magnetic-flux change rate and the observed nonthermal emission of all events. The cumulated positive and negative fluxes, with flux ratios of between 0.64 and 1.35, were almost equivalent to each other. Total reconnection fluxes ranged between 1.8 x 10^21 Mx for the weakest event (GOES class B9.5) and 15.5 x 10^21 Mx for the most energetic one (GOES class X17.2). The amount of magnetic flux participating in the reconnection process was higher in more energetic events than in weaker ones. Flares with more reconnection flux were associated with faster CMEs.

astro-ph.SR↗