arXiv subjects

A. Maciolek

Publications and source records attributed to A. Maciolek.

At least 19 recordsLinked to original sources

arXiv2026

Composite colloidal assembly by critical Casimir forces

We investigate the phase behaviour of mixtures of two populations of colloidal particles dispersed in a binary solvent system near its critical composition. The surfaces of particles are chemically modified to elicit a specific solvent affinity for one of the solvents. In this way, fluid-mediated interactions, which involve the critical Casimir effect, become particle population specific. As a result, the colloidal mixture shows a complex crystallization behavior reminiscent of the crystallization of atomic alloys. We show that the exquisite temperature dependence and reversibility of the critical Casimir interaction allows sampling the entire phase diagram of the binary system, and can be even used to anneal the crystalline microstructure analogous to temperature cycling of atomic alloy phases.

cond-mat.soft↗

arXiv2023

Surface fields and emergence of long-range couplings in classical uniaxial ferromagnetic arrays

Critical wetting is of crucial importance for the phase behaviour of a simple fluid or Ising magnet confined between walls that exert opposing surface fields so that one wall favours liquid (spin up), while the other favours gas (spin down). We show that arrays of boxes filled with fluid or Ising magnet and linked by channels with such ``opposing'' walls can exhibit long-range cooperative effects, on a length scale far exceeding the bulk correlation length. We give the theoretical foundations of these long-range couplings by using a lattice gas (Ising model) description of a system.

cond-mat.stat-mech↗

arXiv2019

Current-mediated synchronization of a pair of beating non-identical flagella

The basic phenomenology of experimentally observed synchronization (i.e., a stochastic phase locking) of identical, beating flagella of a biflagellate alga is known to be captured well by a minimal model describing the dynamics of coupled, limit-cycle, noisy oscillators (known as the noisy Kuramoto model). As demonstrated experimentally, the amplitudes of the noise terms therein, which stem from fluctuations of the rotary motors, depend on the flagella length. Here we address the conceptually important question which kind of synchrony occurs if the two flagella have different lengths such that the noises acting on each of them have different amplitudes. On the basis of a minimal model, too, we show that a different kind of synchrony emerges, and here it is mediated by a current carrying, steady-state; it manifests itself via correlated "drifts" of phases. We quantify such a synchronization mechanism in terms of appropriate order parameters $Q$ and $Q_{\cal S}$ - for an ensemble of trajectories and for a single realization of noises of duration ${\cal S}$, respectively. Via numerical simulations we show that both approaches become identical for long observation times ${\cal S}$. This reveals an ergodic behavior and implies that a single-realization order parameter $Q_{\cal S}$ is suitable for experimental analysis for which ensemble averaging is not always possible.

cond-mat.soft↗

arXiv2017

Fluctuation induced forces in critical films with disorder at their surfaces

We investigate the effect of quenched surface disorder on effective interactions between two planar surfaces immersed in fluids which are near criticality and belong to the Ising bulk universality class. We consider the case that, in the absence of random surface fields, the surfaces of the film belong to the surface universality class of the so-called ordinary transition. We find analytically that in the linear weak-coupling regime, i.e., upon including the mean-field contribution and Gaussian fluctuations, the presence of random surface fields with zero mean leads to an attractive, disorder-induced contribution to the critical Casimir interactions between the two confining surfaces. Our analytical, field-theoretic results are compared with corresponding Monte Carlo simulation data.

cond-mat.stat-mech↗

arXiv2015

Critical Casimir forces in the presence of random surface fields

We study critical Casimir forces (CCF) $f_{\mathrm C}$ for films of thickness $L$ which in the three-dimensional bulk belong to the Ising universality class and which are exposed to random surface fields (RSF) on both surfaces. We consider the case that, in the absence of RSF, the surfaces of the film belong to the surface universality class of the so-called ordinary transition. We carry out a finite-size scaling analysis and show that for weak disorder CCF still exhibit scaling, acquiring a random field scaling variable $w$ which is zero for pure systems. We confirm these analytic predictions by MC simulations. Moreover, our MC data show that $f_{\mathrm C}$ varies as $f_{\mathrm C}(w\to 0)-f_{\mathrm C}(w=0)\sim w^2$. Asymptotically, for large $L$, $w$ scales as $w \sim L^{-0.26} \to 0$ indicating that this type of disorder is an irrelevant perturbation of the ordinary surface universality class. However, for thin films such that $w \simeq 1$, we find that the presence of RSF with vanishing mean value increases significantly the strength of CCF, as compared to systems without them, and shifts the extremum of the scaling function of $f_{\mathrm C}$ towards lower temperatures. But $f_{\mathrm C}$ remains attractive.

cond-mat.stat-mech↗

arXiv2014

Action at the distance

We present a system exhibiting giant proximity effects which parallel observations in superfluid helium (Perron et al, Nature Physics V. 6, 499 (2010)) and give a theoretical explanation of these phenomena based on the mesoscopic picture of phase coexistence in finite systems. Our theory is confirmed by MC simulation studies. Our work demonstrates that such action-at-a-distance can occur in classical systems involving simple or complex fluids, such as colloid-polymer mixtures, or ferromagnets.

cond-mat.stat-mech↗

arXiv2014

Critical Casimir interactions around the consolute point of a binary solvent

Spatial confinement of a near-critical medium changes its fluctuation spectrum and modifies the corresponding order parameter distribution. These effects result in effective, so-called critical Casimir forces (CCFs) acting on the confining surfaces. These forces are attractive for like boundary conditions of the order parameter at the opposing surfaces of the confinement. For colloidal particles dissolved in a binary liquid mixture acting as a solvent close to its critical point of demixing, one thus expects the emergence of phase segregation into equilibrium colloidal liquid and gas phases. We analyze how such phenomena occur asymmetrically in the whole thermodynamic neighborhood of the consolute point of the binary solvent. By applying field-theoretical methods within mean-field approximation and the semi-empirical de Gennes-Fisher functional, we study the CCFs acting between planar parallel walls as well as between two spherical colloids and their dependence on temperature and on the composition of the near-critical binary mixture. We find that for compositions slightly poor in the molecules preferentially adsorbed at the surfaces, the CCFs are significantly stronger than at the critical composition, thus leading to pronounced colloidal segregation. The segregation phase diagram of the colloid solution following from the calculated effective pair potential between the colloids agrees surprisingly well with experiments and simulations.

cond-mat.soft↗

arXiv2011

Critical Casimir forces for Ising films with variable boundary fields

Monte Carlo simulations based on an integration scheme for free energy differences is used to compute critical Casimir forces for three-dimensional Ising films with various boundary fields. We study the scaling behavior of the critical Casimir force, including the scaling variable related to the boundary fields. Finite size corrections to scaling are taken into account. We pay special attention to that range of surface field strengths within which the force changes from repulsive to attractive upon increasing the temperature. Our data are compared with other results available in the literature.

cond-mat.stat-mech↗

arXiv2011

Solvation forces in Ising films with long-range boundary fields: density-matrix renormalization-group study

Using the quasi-exact density-matrix renormalization-group method we calculate the solvation forces in two-dimensional Ising films of thickness L subject to identical algebraically decaying boundary fields with various decay exponents p. At the bulk critical point the solvation force acquires a universal contribution which is long-ranged in L due to the critical fluctuations, a phenomenon known as the critical Casimir effect. For p = 2, 3 and 50, we study the scaling behaviour of the solvation force along the pseudo-phase coexistence and along the critical and sub-critical isotherms.

cond-mat.stat-mech↗

arXiv2009

Critical Casimir effect in classical binary liquid mixtures

If a fluctuating medium is confined, the ensuing perturbation of its fluctuation spectrum generates Casimir-like effective forces acting on its confining surfaces. Near a continuous phase transition of such a medium the corresponding order parameter fluctuations occur on all length scales and therefore close to the critical point this effect acquires a universal character, i.e., to a large extent it is independent of the microscopic details of the actual system. Accordingly it can be calculated theoretically by studying suitable representative model systems. We report on the direct measurement of critical Casimir forces by total internal reflection microscopy (TIRM), with femto-Newton resolution. The corresponding potentials are determined for individual colloidal particles floating above a substrate under the action of the critical thermal noise in the solvent medium, constituted by a binary liquid mixture of water and 2,6-lutidine near its lower consolute point. Depending on the relative adsorption preferences of the colloid and substrate surfaces with respect to the two components of the binary liquid mixture, we observe that, upon approaching the critical point of the solvent, attractive or repulsive forces emerge and supersede those prevailing away from it. Based on the knowledge of the critical Casimir forces acting in film geometries within the Ising universality class and with equal or opposing boundary conditions, we provide the corresponding theoretical predictions for the sphere-planar wall geometry of the experiment. The experimental data for the effective potential can be interpreted consistently in terms of these predictions and a remarkable quantitative agreement is observed.

cond-mat.soft↗

arXiv2008

Universal scaling functions of critical Casimir forces obtained by Monte Carlo simulations

Effective Casimir forces induced by thermal fluctuations in the vicinity of bulk critical points are studied by means of Monte Carlo simulations in three-dimensional systems for film geometries and within the experimentally relevant Ising and XY universality classes. Several surface universality classes of the confining surfaces are considered, some of which are relevant for recent experiments. A novel approach introduced previously EPL 80, 60009 (2007), based inter alia on an integration scheme of free energy differences, is utilized to compute the universal scaling functions of the critical Casimir forces in the critical range of temperatures above and below the bulk critical temperature. The resulting predictions are compared with corresponding experimental data for wetting films of fluids and with available theoretical results.

cond-mat.stat-mech↗

arXiv2008

Interplay of complete wetting, critical adsorption, and capillary condensation

The excess adsorption $Γ$ in two-dimensional Ising strips $(\infty \times L)$ subject to identical boundary fields, at both one-dimensional surfaces decaying in the orthogonal direction $j$ as $-h_1j^{-p}$, is studied for various values of $p$ and along various thermodynamic paths below the critical point by means of the density-matrix renormalization-group method. The crossover behavior between the complete wetting and critical adsorption regimes, occurring in semi-infinite systems, are strongly influenced by confinement effects. Along isotherms $T=const$ the asymptotic power law dependences on the external bulk field, which characterize these two regimes, are undercut by capillary condensation. Along the pseudo first-order phase coexistence line of the strips, which varies with temperature, we find a broad crossover regime where both the thickness of the wetting film and $Γ$ increase as function of the reduced temperature $τ$ but do not follow any power law. Above the wetting temperature the order parameter profiles are not slab-like but exhibit wide interfacial variations and pronounced tails. Inter alia, our explicit calculations demonstrate that, contrary to opposite claims by Kroll and Lipowsky [Phys. Rev. B {\bf 28}, 5273 (1983)], for $p=2$ critical wetting transitions do exist and we determine the corresponding wetting phase diagram in the $(h_1,T)$ plane.

cond-mat.stat-mech↗

arXiv2007

Monte Carlo simulation results for critical Casimir forces

The confinement of critical fluctuations in soft media induces critical Casimir forces acting on the confining surfaces. The temperature and geometry dependences of such forces are characterized by universal scaling functions. A novel approach is presented to determine them for films via Monte Carlo simulations of lattice models. The method is based on an integration scheme of free energy differences. Our results for the Ising and the XY universality class compare favourably with corresponding experimental results for wetting layers of classical binary liquid mixtures and of 4He, respectively.

cond-mat.stat-mech↗

arXiv2007

Critical Casimir Effect in superfluid wetting films

Recent experimental data for the complete wetting behavior of pure 4He and of 3He-4He mixtures exposed to solid substrates show that there is a change of the corresponding film thicknesses L upon approaching thermodynamically the lambda-transition and the tricritical end point, respectively, which can be attributed to critical Casimir forces f_C. We calculate the scaling functions vartheta of f_C within models representing the corresponding universality classes. For the mixtures our analysis provides an understanding of the rich behavior of vartheta deduced from the experimental data and predicts the crossover behavior between the tricritical point and the lambda-transition of pure 4He which are connected by a line of critical points. The formation of a 'soft-mode' phase within the wetting films gives rise to a pronounced maximum of f_C below the tricritical point as observed experimentally. Near the tricritical point we find logarithmic corrections ~L^(-3)(ln L)^(1/2) for the leading behavior of vartheta dominating the contributions from the background dispersion forces.

cond-mat.stat-mech↗

arXiv2007

Effective forces induced by fluctuating interface: exact results

We present exact derivations of the effective capillary wave fluctuation induced forces resulting from pinning of an interface between two coexisting phases at two points separated by a distance r. In two dimensions the Ising ferromagnet calculations based on the transfer matrix approach give an attractive force decaying as 1/r for large distances. In three dimensions mapping of the body-centered solid-on-solid model onto the 6-vertex model allows for exact solution using the bosonization analysis of the equivalent XXZ Heisenberg quantum chain. The exact result gives the attractive force which decays asymptotically as 1/(r\log r).

cond-mat.stat-mech↗

arXiv2006

On the surface critical behaviour in Ising strips: density-matrix renormalization-group study

Using the density-matrix renormalization-group method we study the surface critical behaviour of the magnetization in Ising strips in the subcritical region. Our results support the prediction that the surface magnetization in the two phases along the pseudo-coexistence curve also behaves as for the ordinary transition below the wetting temperature for the finite value of the surface field.

cond-mat.stat-mech↗

arXiv2005

Critical Casimir Effect in 3He-4He films

Universal aspects of the thermodynamic Casimir effect in wetting films of 3He-4He mixtures near their bulk tricritical point are studied within suitable models serving as representatives of the corresponding universality class. The effective forces between the boundaries of such films arising from the confinement are calculated along isotherms at several fixed concentrations of 3He. Nonsymmetric boundary conditions impose nontrivial concentration profiles leading to repulsive Casimir forces which exhibit a rich behavior of the crossover between the tricritical point and the line of critical points. The theoretical results agree with published experimental data and emphasize the importance of logarithmic corrections.

cond-mat.stat-mech↗

arXiv2003

Solvation force for long ranged wall-fluid potentials

The solvation force of a simple fluid confined between identical planar walls is studied in two model systems with short ranged fluid-fluid interactions and long ranged wall-fluid potentials decaying as $-Az^{-p}, z\to \infty$, for various values of $p$. Results for the Ising spins system are obtained in two dimensions at vanishing bulk magnetic field $h=0$ by means of the density-matrix renormalization-group method; results for the truncated Lennard-Jones (LJ) fluid are obtained within the nonlocal density functional theory. At low temperatures the solvation force $f_{solv}$ for the Ising film is repulsive and decays for large wall separations $L$ in the same fashion as the boundary field $f_{solv}\sim L^{-p}$, whereas for temperatures larger than the bulk critical temperature $f_{solv}$ is attractive and the asymptotic decay is $f_{solv}\sim L^{-(p+1)}$. For the LJ fluid system $f_{solv}$ is always repulsive away from the critical region and decays for large $L$ with the the same power law as the wall-fluid potential. We discuss the influence of the critical Casimir effect and of capillary condensation on the behaviour of the solvation force.

cond-mat.stat-mech↗