Searcharxiv⌕ Search

arXiv subjects

A. Martínez-Calvo

Publications and source records attributed to A. Martínez-Calvo.

7 recordsLinked to original sources

The effect of wall slip on the dewetting of ultrathin films on solid substrates: Linear instability and second-order lubrication theory

The influence of wall slip on the instability of a non-wetting liquid film placed on a solid substrate is analyzed in the limit of negligible inertia. In particular, we focus on the stability properties of the film, comparing the performance of the three lubrication models available in the literature, namely the weak, intermediate and strong slip models, with the Stokes equations. Since none of the aforementioned leading-order lubrication models is shown to be able to predict the growth rate of perturbations for the whole range of slipping lengths, we develop a parabolic model able to accurately predict the linear dynamics of the film for arbitrary slip lengths.

physics.flu-dyn↗

Inertial rupture of ultrathin liquid films

Theory and numerical simulations of the Navier-Stokes equations are used to unravel the inertia-driven dewetting dynamics of an ultrathin film of Newtonian liquid deposited on a solid substrate. A classification of the film thinning regimes at finite Ohnersorge numbers is provided, unifying previous findings. We reveal that, for Ohnesorge numbers smaller than one, the final approach to the rupture singularity close to the molecular scales is controlled by a balance between liquid inertia and van der Waals forces leading to a self-similar asymptotic regime with $h_{\text{min}} \propto τ^{2/5}$, where $h_{\text{min}}$ is the minimum film thickness and $τ$ is the time remaining before rupture. The flow exhibits a three-region structure comprising an irrotational core delimited by a pair of boundary layers at the wall and at the free surface. A potential-flow description of the irrotational core is provided, which is asymptotically matched with the viscous layers, allowing us to present a complete parameter-free asymptotic description of inertia-driven film rupture.

physics.flu-dyn↗

Stokes theory of thin-film rupture

The structure of the flow induced by the van der Waals destabilization of a non-wetting liquid film placed on a solid substrate is unraveled by means of theory and numerical simulations of the Stokes equations. Our analysis reveals that lubrication theory, which yields $h_{\text{min}} \propto τ^{1/5}$ where $h_{\text{min}}$ is the minimum film thickness and $τ$ is the time until breakup, cannot be used to describe the local flow close to rupture. Instead, the slender lubrication solution is shown to experience a crossover to a universal self-similar solution of the Stokes equations that yields $h_{\text{min}} \propto τ^{1/3}$, with an opening angle of $37^{\circ}$ off the solid.

physics.flu-dyn↗

Natural break-up and satellite formation regimes of surfactant-laden liquid threads

We report a numerical analysis of the unforced break-up of free cylindrical threads of viscous Newtonian liquid whose interface is coated with insoluble surfactants, focusing on the formation of satellite droplets. The initial conditions are harmonic disturbances of the cylindrical shape with a small amplitude $ε$, and whose wavelength is the most unstable one deduced from linear stability theory. We demonstrate that, in the limit $ε\to 0$, the problem depends on two dimensionless parameters, namely the Laplace number, $La=ρσ_0 \bar{R}/μ^2$, and the elasticity parameter, $β=E/σ_0$, where $ρ$, $μ$ and $σ_0$ are the liquid density, viscosity and initial surface tension, respectively, $E$ is the Gibbs elasticity and $\bar{R}$ is the unperturbed thread radius. A parametric study is presented to quantify the influence of $La$ and $β$ on two key quantities: the satellite droplet volume and the mass of surfactant trapped at the satellite's surface just prior to pinch-off, $V_{sat}$ and $Σ_{sat}$, respectively. We identify a weak-elasticity regime, $β\lesssim 0.05$, in which the satellite volume and the associated mass of surfactant obey the scaling law $V_{sat} = Σ_{sat} = 0.0042 La^{1.64}$ for $La \lesssim 2$. For $La \gtrsim 10$, $V_{sat}$ and $Σ_{sat}$ reach a plateau of about $3 \%$ and $2.9 \%$ respectively, $V_{sat}$ being in close agreement with previous experiments of low-viscosity threads with clean interfaces. For $La<7.5$, we reveal the existence of a discontinuous transition at a critical elasticity $β_c (La)$, with $β_c \to 0.98$ for $La \lesssim 0.2$, such that $V_{sat}$ and $Σ_{sat}$ abruptly increase. The jumps experienced by both quantities reach a plateau when $La \lesssim 0.2$, while they decrease monotonically as $La$ increases up to $La = 7.5$, where both become zero.

physics.flu-dyn↗

Start-up flow in shallow deformable microchannels

Microfluidic systems are usually fabricated with soft materials that deform due to the fluid stresses. Recent experimental and theoretical studies on the steady flow in shallow deformable microchannels have shown that the flow rate is a nonlinear function of the pressure drop due to the deformation of the upper soft wall. Here, we extend the steady theory of Christov et al. (2018) by considering the start-up flow from rest, both in pressure-controlled and in flow-rate-controlled configurations. The characteristic scales and relevant parameters governing the transient flow are first identified, followed by the development of an unsteady lubrication theory assuming that the inertia of the fluid is negligible, and that the upper wall can be modeled as an elastic plate under pure bending satisfying the Kirchhoff-Love equation. The model is governed by two non-geometrical dimensionless numbers: a compliance parameter $β$, which compares the characteristic displacement of the upper wall with the undeformed channel height, and a parameter $γ$ that compares the inertia of the solid with its flexural rigidity. In the limit of negligible solid inertia, $γ\to 0$, a quasi-steady model is developed, whereby the fluid pressure satisfies a nonlinear diffusion equation, with $β$ as the only parameter, which admits a self-similar solution under pressure-controlled conditions. This simplified lubrication description is validated with coupled three-dimensional numerical simulations of the Navier equations for the elastic solid and the Navier-Stokes equations for the fluid. The agreement is very good when the hypotheses behind the model are satisfied. Unexpectedly, we find fair agreement even in cases where the solid and liquid inertia cannot be neglected.

physics.flu-dyn↗

Temporal stability of free liquid threads with surface viscoelasticity

We analyse the effect of surface viscoelasticity on the temporal stability of a free cylindrical liquid jet coated with insoluble surfactant, extending the results of Timmermans & Lister (J. Fluid Mech., vol. 459, 2002, pp. 289-306). Our development requires, in particular, deriving the correct expressions for the normal and tangential stress boundary conditions at a general axisymmetric interface when surface viscosity is modelled with the Boussinesq-Scriven constitutive equation. These stress conditions are applied to obtain a new dispersion relation for the liquid thread, which is solved to describe its temporal stability as a function of four governing parameters, namely the capillary Reynolds number, the elasticity parameter, and the shear and dilatational Boussinesq numbers. It is shown that both surface viscosities have a stabilising influence for all values of the capillary Reynolds number and elasticity parameter, the effect being more pronounced at low capillary Reynolds numbers. The wavenumber of maximum amplification depends non-monotonically on the Boussinesq numbers, especially for very viscous threads at low values of the elasticity parameter. Finally, two different lubrication approximations of the equations of motion are derived. While the validity of the leading-order model is limited to small enough values of the elasticity parameter and of the Boussinesq numbers, a higher-order parabolic model is able to accurately capture the linearised behaviour for the whole range of values of the four control parameters.

physics.flu-dyn↗

The nonlinear states of viscous capillary jets confined in the axial direction

We report an experimental and theoretical study of the global stability and nonlinear dynamics of vertical jets of viscous liquid confined in the axial direction due to their impact on a bath of the same liquid. Previous works demonstrated that in the absence of axial confinement the steady liquid thread becomes unstable due to an axisymmetric global mode for values of the flow rate, $Q$, below a certain critical value, $Q_c$, giving rise to oscillations of increasing amplitude that finally lead to a dripping regime (Sauter & Buggisch, J. Fluid Mech., 2005; Rubio-Rubio et al., J. Fluid Mech., 2013). Here we focus on the effect of the jet length, $L$, on the transitions that take place for decreasing values of $Q$. The linear stability analysis shows good agreement with our experiments, revealing that $Q_c$ increases monotonically with $L$, reaching the semi-infinite jet asymptote for large values of $L$. Moreover, as $L$ decreases a quasi-static limit is reached, whereby $Q_c \to 0$ and the neutral conditions are given by a critical length determined by hydrostatics. Our experiments have also revealed the existence of a new regime intermediate between steady jetting and dripping, in which the thread reaches a limit-cycle state without breakup. We thus show that there exist three possible states depending on the values of the control parameters, namely steady jetting, oscillatory jetting and dripping. For two different combinations of liquid viscosity, and injector radius, $R$, the boundaries separating these regimes have been determined in the $Q-L$ parameter plane, showing that steady jetting exists for small enough values of $L$ or large enough values of $Q$, dripping prevails for small enough values of $Q$ or sufficiently large values of $L$, and oscillatory jetting takes place in an intermediate region whose size increases with the liquid viscosity and decreases with $R$.

physics.flu-dyn↗