arXiv subjects

A. Marty

Publications and source records attributed to A. Marty.

At least 37 records · Page 2Linked to original sources

arXiv2018

Cross-shaped nanostructures for the study of spin to charge interconversions using spin-orbit coupling in non-magnetic materials

Several spin-orbit effects allow performing spin to charge inter-conversion: the spin Hall effects, the Rashba effect, or the spin-momentum locking in topological insulators. Here we focus on how the detection of this inter-conversion can be made electrically, using three different cross-shaped nanostructures. We apply these measurement configurations to the case of the spin Hall effect in Pt, using CoFe electrodes to detect and inject spins. Both the direct and inverse spin Hall effect can be detected, with a spin Hall signal up to two order of magnitude higher than that of nonlocal measurements in metallic lateral spin valves, and with a much simpler fabrication protocol. We compare the respective signal amplitude of the three proposed geometries. Finally, comparison of the observed spin signals with finite element method calculations allows extracting the spin Hall angle and the spin diffusion length of Pt.

cond-mat.mtrl-sci↗

arXiv2018

Magnetotransport in Bi$_2$Se$_3$ thin films epitaxially grown on Ge(111)

Topological insulators (TIs) like Bi$_2$Se$_3$ are a class of material with topologically protected surface states in which spin-momentum locking may enable spin-polarized and defect-tolerant transport. In this work, we achieved the epitaxial growth of Bi$_2$Se$_3$ thin films on germanium, which is a key material for microelectronics. Germanium also exhibits interesting properties with respect to the electron spin such as a spin diffusion length of several micrometers at room temperature. By growing Bi$_2$Se$_3$ on germanium, we aim at combining the long spin diffusion length of Ge with the spin-momentum locking at the surface of Bi$_2$Se$_3$. We first performed a thorough structural analysis of Bi$_2$Se$_3$ films using electron and x-ray diffraction as well as atomic force microscopy. Then, magnetotransport measurements at low temperature showed the signature of weak antilocalization as a result of two-dimensional transport in the topologically protected surface states of Bi$_2$Se$_3$. Interestingly, the magnetotransport measurements also point out that the conduction channel can be tuned between the Bi$_2$Se$_3$ film and the Ge layer underneath by means of the bias voltage or the applied magnetic field. This result suggests that the Bi$_2$Se$_3$/Ge junction is a promising candidate for tuning spin-related phenomena at interfaces between TIs and semiconductors.

cond-mat.mtrl-sci↗

arXiv2018

Tuning spin-charge interconversion with quantum confinement in ultrathin Bi/Ge(111) films

Spin-charge interconversion (SCI) phenomena have attracted a growing interest in the field of spintronics as means to detect spin currents or manipulate the magnetization of ferromagnets. The key ingredients to exploit these assets are a large conversion efficiency, the scalability down to the nanometer scale and the integrability with opto-electronic and spintronic devices. Here we show that, when an ultrathin Bi film is epitaxially grown on top of a Ge(111) substrate, quantum size effects arising in nanometric Bi islands drastically boost the SCI efficiency, even at room temperature. Using x-ray diffraction (XRD), scanning tunneling microscopy (STM) and spin- and angle-resolved photoemission (S-ARPES) we obtain a clear picture of the film morphology, crystallography and electronic structure. We then exploit the Rashba-Edelstein effect (REE) and inverse Rashba-Edelstein effect (IREE) to directly quantify the SCI efficiency using optical and electrical spin injection.

cond-mat.mtrl-sci↗

arXiv2017

Large enhancement of the spin Hall effect in Au by scattering with side-jump on Ta impurities

We present measurements of the Spin Hall Effect (SHE) in AuW and AuTa alloys for a large range of W or Ta concentrations by combining experiments on lateral spin valves and Ferromagnetic-Resonance/spin pumping technique. The main result is the identification of a large enhancement of the Spin Hall Angle (SHA) by the side-jump mechanism on Ta impurities, with a SHA as high as + 0.5 (i.e $50\%$) for about 10\% of Ta. In contrast the SHA in AuW does not exceed + 0.15 and can be explained by intrinsic SHE of the alloy without significant extrinsic contribution from skew or side-jump scattering by W impurities. The AuTa alloys, as they combine a very large SHA with a moderate resistivity (smaller than $85\,μΩ.cm$), are promising for spintronic devices exploiting the SHE.

cond-mat.mtrl-sci↗

arXiv2017

Millimeter-scale layered MoSe2 grown on sapphire and evidence for negative magnetoresistance

Molecular beam epitaxy technique has been used to deposit a single layer and a bilayer of MoSe 2 on sapphire. Extensive characterizations including in-situ and ex-situ measurements show that the layered MoSe 2 grows in a scalable manner on the substrate and reveals characteristics of a stoichiometric 2H-phase. The layered MoSe 2 exhibits polycrystalline features with domains separated by defects and boundaries. Temperature and magnetic field dependent resistivity measurements unveil a carrier hopping character described within two-dimensional variable range hopping mechanism. Moreover, a negative magnetoresistance was observed, stressing a fascinating feature of the charge transport under the application of a magnetic field in the layered MoSe 2 system. This negative magnetoresistance observed at millimeter-scale is similar to that observed recently at room temperature inWS2 flakes at a micrometer scale [Zhang et al., Appl. Phys. Lett. 108, 153114 (2016)]. This scalability highlights the fact that the underlying physical mechanism is intrinsic to these two-dimensional materials and occurs at very short scale.

cond-mat.mtrl-sci↗

arXiv2015

Comparison of the use of NiFe and CoFe as electrodes for metallic lateral spin-valves

Spin injection and detection in Co60Fe40-based all-metallic lateral spin-valves have been studied at both room and low temperatures. The obtained spin signals amplitudes have been compared to that of identical Ni80Fe20-based devices. The replacement of Ni80Fe20 by CoFe allows increasing the spin signal amplitude by up to one order of magnitude, thus reaching 50 mΩ at room temperature. The spin signal dependence with the distance between the ferromagnetic electrodes has been analyzed using both a 1D spin transport model and finite elements method simulations. The enhancement of the spin signal amplitude when using CoFe electrodes can be explained by a higher effective polarization.

cond-mat.mtrl-sci↗

arXiv2015

Evaluation of the spin diffusion length of AuW alloy by spin absorption experiments in the limit of large spin-orbit interactions

The knowledge of the spin diffusion length $λ_{A}$ is a prerequisite for the estimation of the spin Hall angle. We investigate spin current absorption of materials with small $λ_{A}$ using AuW stripes inserted in lateral spin-valves. Width variations of the AuW stripe lead to drastic changes of the spin absorption, which cannot be explained by conventional analysis. We show that the spin-current polarization and the spin accumulation attenuation in the vicinity of the spin absorber must to be precisely taken into account for accurate estimation of $λ_{A}$. We propose an analytical model supported by numerical calculations that allows to extract proper $λ_{A}$ values of spin Hall effect materials.

cond-mat.mes-hall↗

arXiv2015

Spin-pumping into surface states of topological insulator α-Sn, spin to charge conversion at room temperature

We present experimental results on the conversion of a spin current into a charge current by spin pumping into the Dirac cone with helical spin polarization of the elemental topological insulator (TI) α-Sn[1-3]. By angle-resolved photoelectron spectroscopy (ARPES) we first confirm that the Dirac cone at the surface of α-Sn (0 0 1) layers subsists after covering with Ag. Then we show that resonant spin pumping at room temperature from Fe through Ag into α-Sn layers induces a lateral charge current that can be ascribed to the Inverse Edelstein Effect[4-5]. Our observation of an Inverse Edelstein Effect length[5-6] much longer than for Rashba interfaces[5-10] demonstrates the potential of the TI for conversion between spin and charge in spintronic devices. By comparing our results with data on the relaxation time of TI free surface states from time-resolved ARPES, we can anticipate the ultimate potential of TI for spin to charge conversion and the conditions to reach it.

cond-mat.mes-hall↗

arXiv2015

Calculation method of spin accumulations and spin signals in nanostructures using spin resistors

The understanding and calculation of spin transport are essential elements for the development of spintronics devices. Here, we propose a simple method to calculate analytically the spin accumulations, spin currents and magnetoresistances in complex systems. This can be used both for CPP experiments in multilayers and for multiterminal nanostructures made of semiconductors, oxides, metals and carbon allotropes.

cond-mat.mes-hall↗

arXiv2014

Experimental evidences of a large extrinsic spin Hall effect in AuW alloy

We report an experimental study of a gold-tungsten alloy (7% at. W concentration in Au host) displaying remarkable properties for spintronics applications using both magneto-transport in lateral spin valve devices and spin-pumping with inverse spin Hall effect experiments. A very large spin Hall angle of about 10% is consistently found using both techniques with the reliable spin diffusion length of 2 nm estimated by the spin sink experiments in the lateral spin valves. With its chemical stability, high resistivity and small induced damping, this AuW alloy may find applications in the nearest future.

cond-mat.mes-hall↗

arXiv2014

Core-shell nanostructure in a Ge_0.9Mn_0.1 film from structural and magnetic measurements

We have characterized a film of Ge_0.9Mn_0.1 forming self-organized nanocolumns perpendicular to the Ge substrate with high resolution scanning transmission electron microscopy combined with electron energy loss spectroscopy, and bulk magnetization and positive muon spin rotation and relaxation (muSR) measurements. The Mn-rich nanocolumns form a triangular lattice with no detectable Mn atoms in the matrix. They consist of cores surrounded by shells. The combined analysis of bulk magnetization and muSR data enables us to characterize the electronic and magnetic properties of both the cores and shells. The discovered phase separation of the columns between a core and a shell is probably relevant for other transition-metal doped semiconductors.

cond-mat.mes-hall↗

arXiv2013

Spin Pumping and Inverse Spin Hall Effect in Germanium

We have measured the inverse spin Hall effect (ISHE) in \textit{n}-Ge at room temperature. The spin current in germanium was generated by spin pumping from a CoFeB/MgO magnetic tunnel junction in order to prevent the impedance mismatch issue. A clear electromotive force was measured in Ge at the ferromagnetic resonance of CoFeB. The same study was then carried out on several test samples, in particular we have investigated the influence of the MgO tunnel barrier and sample annealing on the ISHE signal. First, the reference CoFeB/MgO bilayer grown on SiO$_{2}$ exhibits a clear electromotive force due to anisotropic magnetoresistance and anomalous Hall effect which is dominated by an asymmetric contribution with respect to the resonance field. We also found that the MgO tunnel barrier is essential to observe ISHE in Ge and that sample annealing systematically lead to an increase of the signal. We propose a theoretical model based on the presence of localized states at the interface between the MgO tunnel barrier and Ge to account for these observations. Finally, all of our results are fully consistent with the observation of ISHE in heavily doped $n$-Ge and we could estimate the spin Hall angle at room temperature to be $\approx$0.001.

cond-mat.mtrl-sci↗

arXiv2012

Electrical and thermal spin accumulation in germanium

In this letter, we first show electrical spin injection in the germanium conduction band at room temperature and modulate the spin signal by applying a gate voltage to the channel. The corresponding signal modulation agrees well with the predictions of spin diffusion models. Then by setting a temperature gradient between germanium and the ferromagnet, we create a thermal spin accumulation in germanium without any tunnel charge current. We show that temperature gradients yield larger spin accumulations than pure electrical spin injection but, due to competing microscopic effects, the thermal spin accumulation in germanium remains surprisingly almost unchanged under the application of a gate voltage to the channel.

cond-mat.mtrl-sci↗

arXiv2011

Micromagnetic study of flux-closure states in Fe dots using quantitative Lorentz Microscopy

A micromagnetic study of epitaxial micron-sized iron dots is reported through the analysis of Fresnel contrast in Lorentz Microscopy. Their use is reviewed and developed through analysis of various magnetic structures in such dots. Simple Landau configuration is used to investigate various aspects of asymmetric Bloch domain walls. The experimental width of such a complex wall is first derived and its value is discussed with the help of micromagnetic simulations. Combination of these two approaches enables us to define what is really extracted when estimating asymmetric wall width in Lorentz Microscopy. Moreover, quantitative data on the magnetization inside the dot is retrieved using phase retrieval as well as new informations on the degrees of freedom of such walls. Finally, it is shown how the existence and the propagation of a surface vortex can be characterized and monitored. This demonstrates the ability to reach a magnetic sensitivity a priori hidden in Fresnel contrast, based on an original image treatment and backed-up by the evaluation of contrasts obtained from micromagnetic simulations.

cond-mat.mtrl-sci↗

arXiv2011

Origin of perpendicular anisotropy in thin Co/Pt bilayers grown on alumina

We investigate in this paper the origin of perpendicular anisotropy in Co (1.6 nm)/Pt (3.0 nm) bilayers grown on alumina and annealed up to 650$^{\circ}$C. Above 350$^{\circ}$C, all layers exhibit perpendicular anisotropy. Then coercive fields increase linearly with annealing temperature following two different rates: 0.05 T/100$^{\circ}$C below 550$^{\circ}$C and 0.8 T/100$^{\circ}$C above. By making careful structural characterizations using x-ray diffraction and transmission electron microscopy, we demonstrate the presence of short range correlation of L1$_{1}$ type below 550$^{\circ}$C whereas above 550$^{\circ}$C, L1$_{0}$ chemical ordering is observed. We conclude that perpendicular anisotropy observed in Co/Pt bilayers grown on alumina and annealed may not only be due to interface anisotropy as usually invoked but also to CoPt alloying and chemical ordering that take place during post-growth annealing.

cond-mat.mtrl-sci↗

arXiv2011

Electrical spin injection and detection in Germanium using three terminal geometry

In this letter, we report on successful electrical spin injection and detection in \textit{n}-type germanium-on-insulator (GOI) using a Co/Py/Al$_{2}$O$_{3}$ spin injector and 3-terminal non-local measurements. We observe an enhanced spin accumulation signal of the order of 1 meV consistent with the sequential tunneling process via interface states in the vicinity of the Al$_{2}$O$_{3}$/Ge interface. This spin signal is further observable up to 220 K. Moreover, the presence of a strong \textit{inverted} Hanle effect points at the influence of random fields arising from interface roughness on the injected spins.

cond-mat.mtrl-sci↗

arXiv2010

Dimensionality cross-over in magnetism: from domain walls (2D) to vortices (1D)

Dimensionality cross-over is a classical topic in physics. Surprisingly it has not been searched in micromagnetism, which deals with objects such as domain walls (2D) and vortices (1D). We predict by simulation a second-order transition between these two objects, with the wall length as the Landau parameter. This was conrmed experimentally based on micron-sized ux-closure dots.

cond-mat.mtrl-sci↗

arXiv2009

How many bits may fit in a single magnetic dot? XMCD-PEEM evidences the switching of Néel caps inside Bloch domain walls

Data storage relies on the handling of two states, called bits. The market of mass storage is currently still dominated by magnetic technology, hard disk drives for the broad public and tapes for massive archiving. In these devices each bit is stored in the form of the direction of magnetization of nanosized magnetic domains, i.e. areas of ferromagnetic materials displaying a uniform magnetization. While miniaturization is the conventional way to fuel the continuous increase of device density, disruptive solutions are also sought. To these pertain in recent years many fundamental studies no longer considering the magnetic domains themselves, but the manipulation of the domain walls (DWs) that separate such domains. Concepts of storage and logic based on the propagation of DWs along lithographically-patterned stripes have been patented, while many fundamental aspects of DW propagation deeply related to condensed matter physics are still hotly debated. If one now considers magnetic dots of submicrometer dimensions, the magnetization has a tendency to curl along the outer edges of the nanostructure to close its magnetic flux and thereby reduce its magnetostatic energy. Then both domains and DWs of well-defined geometries arise, whose combined manipulation has been proposed as a multilevel magnetic storage scheme...

cond-mat.mtrl-sci↗