Searcharxiv⌕ Search

arXiv subjects

A. Matyja

Publications and source records attributed to A. Matyja.

13 recordsLinked to original sources
arXiv2026

Large-scale real-time signal processing in physics experiments: The ALICE TPC FPGA pipeline

For LHC Run 3, the ALICE Time Projection Chamber was upgraded to operate in continuous readout mode. Interaction rates of up to 50 kHz in Pb-Pb collisions require real-time processing of more than 3 TB/s of raw detector data. This requirement is met by a custom FPGA-based processing pipeline that performs the complete front-end data treatment fully in-stream, including common-mode correction, pedestal subtraction, ion-tail filtering, zero suppression, and dense data packing. A central element of the design is a highly parallel common-mode correction algorithm operating directly on the streaming data. It robustly identifies signal-free readout channels on a time-bin basis and applies pad-dependent scaling to compensate for local variations in capacitive coupling in the GEM readout. In combination with pedestal subtraction and ion-tail filtering, this enables accurate baseline restoration under extreme high-occupancy conditions, preventing signal loss while efficiently suppressing noise prior to zero suppression. The pipeline operates continuously at the full detector bandwidth and reduces the raw input rate to about 900 GB/s for Pb-Pb collisions at the target interaction rate. Overall, it represents a large-scale FPGA-based real-time signal-processing implementation for high-energy physics detector readout.

physics.ins-det↗
arXiv2025

Polish national input to the 2026 update of the European Strategy for Particle Physics

The Polish high energy physics (HEP) community fully recognizes the urgent need to host at CERN a flagship project implementing a broad, long-term, and comprehensive vision of particle physics research and pursuing technological advances. Thus, we give preference and declare willingness to actively engage and participate in every aspect of the FCC project (both FCC-ee and FCC-hh), particularly accelerator development, detector construction, theoretical calculations, and physics analyses. As the e+e- Higgs Factory is the top priority for our field, the proposal to build a linear collider facility at CERN, opening up complementary physics prospects, should be considered as the second option. Polish teams declare strong support and are fully committed to contribute to the full exploitation of all aspects of the physics potential of the LHC and the HL-LHC programmes. To ensure the long-term development of particle physics, we also support the continuation of the high-field magnet research programme, as well as investigating other scenarios including, in particular, linear acceleration techniques and new acceleration technologies such as plasma acceleration, the muon collider and Gamma Factory. In addition, CERN should continue to provide support to fixed-target programmes at SPS as well as other non-collider and non-accelerator experiments at CERN. Participation in major projects conducted in and outside Europe should also be fostered. Education, communication, and outreach of particle physics are of paramount importance for the future of our field. An increased effort coordinated at the European level and resources allocated in all Member States are essential to effectively support future large-scale particle physics projects.

hep-ex↗
arXiv2021

$K^{*}(892)^0$ meson production in inelastic $p+p$ interactions at 40 and 80 GeV/$c$ beam momenta measured by NA61/SHINE at the CERN SPS

Measurements of $K^{*}(892)^0$ resonance production via its $K^{+}\pi^{-}$ decay mode in inelastic $p+p$ collisions at beam momenta 40 and 80 GeV/$c$ ($\sqrt{s_{NN}}=8.8$ and 12.3 GeV) are presented. The data were recorded by the NA61/SHINE hadron spectrometer at the CERN Super Proton Synchrotron. The \textit{template} method was used to extract the $K^{*}(892)^0$ signal. Transverse momentum and rapidity spectra were obtained. The mean multiplicities of $K^{*}(892)^0$ mesons were found to be $(35.1 \pm 1.3 \mathrm{(stat)} \pm 3.6 \mathrm{(sys)) \cdot 10^{-3}}$ at 40 GeV/$c$ and $(58.3 \pm 1.9 \mathrm{(stat)} \pm 4.9 \mathrm{(sys)) \cdot 10^{-3}}$ at 80 GeV/$c$. The NA61/SHINE results are compared with the EPOS1.99 and Hadron Resonance Gas models as well as with world data. The transverse mass spectra of $K^{*}(892)^0$ mesons and other particles previously reported by NA61/SHINE were fitted within the Blast-Wave model. The transverse flow velocities are close to 0.1--0.2 of the speed of light and are significantly smaller than the ones determined in heavy nucleus-nucleus interactions at the same beam momenta.

nucl-ex↗
arXiv2018

Particle identification studies with a full-size 4-GEM prototype for the ALICE TPC upgrade

A large Time Projection Chamber is the main device for tracking and charged-particle identification in the ALICE experiment at the CERN LHC. After the second long shutdown in 2019/20, the LHC will deliver Pb beams colliding at an interaction rate of about 50 kHz, which is about a factor of 50 above the present readout rate of the TPC. This will result in a significant improvement on the sensitivity to rare probes that are considered key observables to characterize the QCD matter created in such collisions. In order to make full use of this luminosity, the currently used gated Multi-Wire Proportional Chambers will be replaced. The upgrade relies on continuously operated readout detectors employing Gas Electron Multiplier technology to retain the performance in terms of particle identification via the measurement of the specific energy loss by ionization d$E$/d$x$. A full-size readout chamber prototype was assembled in 2014 featuring a stack of four GEM foils as an amplification stage. The performance of the prototype was evaluated in a test beam campaign at the CERN PS. The d$E$/d$x$ resolution complies with both the performance of the currently operated MWPC-based readout chambers and the challenging requirements of the ALICE TPC upgrade program. Detailed simulations of the readout system are able to reproduce the data.

physics.ins-det↗
arXiv2011

Study of B^{+-} -> K^{+-}(K_S K pi)^0 Decay and Determination of eta_c and eta_c(2S) Parameters

We report the results of a study of $B^{\pm}\to K^{\pm}η_c$ and $B^{\pm}\to K^{\pm}η_c(2S)$ decays followed by $η_c$ and $η_c(2S)$ decays to $(K_SKπ)^0$. The results are obtained from a data sample containing 535 million $B\bar{B}$-meson pairs collected by the Belle experiment at the KEKB $e^+e^-$ collider. We measure the products of the branching fractions ${\mathcal B}(B^{\pm}\to K^{\pm}η_c){\mathcal B}(η_c\to K_S K^{\pm}π^{\mp})=(26.7\pm 1.4(stat)^{+2.9}_{-2.6}(syst)\pm 4.9(model))\times 10^{-6}$ and ${\mathcal B}(B^{\pm}\to K^{\pm}η_c(2S)){\mathcal B}(η_c(2S)\to K_S K^{\pm}π^{\mp})=(3.4^{+2.2}_{-1.5}(stat+model)^{+0.5}_{-0.4} syst))\times 10^{-6}$. Interference with the non-resonant component leads to significant model uncertainty in the measurement of these product branching fractions. Our analysis accounts for this interference and allows the model uncertainty to be reduced. We also obtain the following charmonia masses and widths: $M(η_c)=(2985.4\pm 1.5(stat)^{+0.5}_{-2.0}(syst))$ MeV/$c^2$, $Γ(η_c)=(35.1\pm 3.1(stat)^{+1.0}_{-1.6}(syst))$ MeV/$c^2$, $M(η_c(2S))=(3636.1^{+3.9}_{-4.2}(stat+model)^{+0.7}_{-2.0}(syst))$ MeV/$c^2$, $Γ(η_c(2S))=(6.6^{+8.4}_{-5.1}(stat+model)^{+2.6}_{-0.9}(syst))$ MeV/$c^2$.

hep-ex↗
arXiv2011

Evidence for the Suppressed Decay B- -> DK-, D -> K+pi-

The suppressed decay chain B- -> DK-, D -> K+pi-, where D indicates a anti-D0 or D0 state, provides important information on the CP-violating angle phi_3. We measure the ratio R_{DK} of the decay rates to the favored mode B- -> DK-, D -> K-pi+ to be R_{DK} = [1.63^{+0.44}_{-0.41}(stat)^{+0.07}_{-0.13}(syst)] x 10^{-2}, which indicates the first evidence of the signal with a significance of 4.1sigma. We also measure the asymmetry A_{DK} between the charge-conjugate decays to be A_{DK} = -0.39^{+0.26}_{-0.28}(stat)^{+0.04}_{-0.03}(syst). The results are based on the full 772 x 10^6 B anti-B pair data sample collected at the Upsilon(4S) resonance with the Belle detector.

hep-ex↗
arXiv2010

Observation of Bs->Ds(*)+Ds(*)- using e+e- collisions and a determination of the Bs-Bsbar width difference ΔΓ_s

We have made the first observation of Bs->Ds(*)+Ds(*)- decays using 23.6 fb-1 of data recorded by the Belle experiment running on the Upsilon(5S) resonance. The branching fractions are measured to be B(B^0_s\ra D^+_s D^-_s) = (1.0\,^{+0.4}_{-0.3}\,^{+0.3}_{-0.2})%, B(B^0_s\ra D^{*\pm}_s D^{\mp}_s) = (2.8\,^{+0.8}_{-0.7}\,\pm 0.7)%, and B(B^0_s\ra D^{*+}_s D^{*-}_s) = (3.1\,^{+1.2}_{-1.0}\,\pm 0.8)%; the sum is B(B^0_s\ra D^{(*)+}_s D^{(*)-}_s) = (6.9\,^{+1.5}_{-1.3}\,\pm 1.9)%. Assuming Bs->Ds(*)+Ds(*)- saturates decays to CP-even final states, the branching fraction determines the ratio ΔΓ_s/cos(ϕ), where ΔΓ_s is the difference in widths between the two Bs-Bsbar mass eigenstates, and ϕis a CP-violating weak phase. Taking CP violation to be negligibly small, we obtain ΔΓ_s/Γ_s = 0.147^{+0.036}_{-0.030}(stat.)^{+0.044}_{-0.042}(syst.), where Γ_s is the mean decay width.

hep-ex↗
arXiv2010

Measurement of CP violating asymmetries in B^0 -> K^+K^- K^0_S decays with a time-dependent Dalitz approach

We report a measurement of $CP$ violating asymmetries in $B^0(\overline{B}^0) \to K^+ K^- K^0_S$ decays with a time-dependent Dalitz approach. This analysis is based on a data sample of $657\times 10^6$ $B\overline{B}$ pairs accumulated at the $Υ(4S)$ resonance with the Belle detector at the KEKB asymmetric-energy $e^+e^-$ collider. As the result of an unbinned maximum likelihood fit to the selected candidates, the mixing-induced and direct $CP$ violation parameters, $ϕ^{\rm eff}_1$ and ${\cal A}_{CP}$ are obtained for $B^0 \to ϕ(1020) K^0_S$, $B^0 \to f_0(980) K^0_S$ and other $B^0 \to K^+ K^- K^0_S$ decays. We find four solutions that describe the data. There are \{eqnarray*} ϕ_1^{\rm eff}(B^0\to ϕ(1020) K^0_S) & = & (32.2 \pm 9.0 \pm 2.6 \pm 1.4)^{\circ}; ϕ_1^{\rm eff}(B^0\to ϕ(1020) K^0_S) & = & (26.2 \pm 8.8 \pm 2.7 \pm 1.2)^{\circ};\\ ϕ_1^{\rm eff}(B^0\to ϕ(1020) K^0_S) & = & (27.3 \pm 8.6 \pm 2.8 \pm 1.3)^{\circ}\; {\rm and}\\ ϕ_1^{\rm eff}(B^0\to ϕ(1020) K^0_S) & = & (24.3 \pm 8.0 \pm 2.9 \pm 5.2)^{\circ}.{eqnarray*}\ The values for the $CP$ violating phase in $B^0\to ϕ(1020) K^0_S$ are similar but other properties of the Dalitz plot are quite different for the four solutions. These four solutions have consistent $ϕ^{\rm eff}_1$ values for all three $B$ meson decay channels and none of them deviates significantly from the values measured in $B \to (c\bar{c}) K^0$ decays with the currently available statistics. In addition, we find no significant direct $CP$ violation.

hep-ex↗
arXiv2010

First Measurement of Inclusive B -> X_s eta Decays

We report a first measurement of inclusive B -> X_s eta decays, where X_s is a charmless state with unit strangeness. The measurement is based on a pseudo-inclusive reconstruction technique and uses a sample of 657 x 10^6 BB-bar pairs accumulated with the Belle detector at the KEKB e^+e^- collider. For M_{X_s} < 2.6 GeV/c^2, we measure a branching fraction of (26.1 +/- 3.0 (stat) +1.9 -2.1 (syst) +4.0 -7.1 (model)) x 10^-5 and a direct CP asymmetry of A_{CP} = -0.13 +/- 0.04 +0.02 -0.03. Over half of the signal occurs in the range M_{X_s} > 1.8 GeV/c^2.

hep-ex↗
arXiv2010

The ALICE TPC, a large 3-dimensional tracking device with fast readout for ultra-high multiplicity events

The design, construction, and commissioning of the ALICE Time-Projection Chamber (TPC) is described. It is the main device for pattern recognition, tracking, and identification of charged particles in the ALICE experiment at the CERN LHC. The TPC is cylindrical in shape with a volume close to 90 m^3 and is operated in a 0.5 T solenoidal magnetic field parallel to its axis. In this paper we describe in detail the design considerations for this detector for operation in the extreme multiplicity environment of central Pb--Pb collisions at LHC energy. The implementation of the resulting requirements into hardware (field cage, read-out chambers, electronics), infrastructure (gas and cooling system, laser-calibration system), and software led to many technical innovations which are described along with a presentation of all the major components of the detector, as currently realized. We also report on the performance achieved after completion of the first round of stand-alone calibration runs and demonstrate results close to those specified in the TPC Technical Design Report.

physics.ins-det↗
arXiv2007

Observation of B^0 \to D^{*-} \tau^+ \nu_{\tau} decay at Belle

We report an observation of the decay $B^0\to D^{*-} \tau^+ \nu_{\tau}$ in a data sample containing $535\times10^6$ $B\bar{B}$ pairs collected with the Belle detector at the KEKB asymmetric-energy $e^+e^-$ collider. We find a signal with a significance of 5.2 standard deviations and measure the branching fraction $\mathcal{B}(B^0\to D^{*-} \tau ^+ \nu_{\tau})=(2.02 ^{+0.40}_{-0.37} (stat) \pm 0.37 (syst)) % $. This is the first observation of an exclusive $B$ decay with a $b \to c \tau \nu_{\tau}$ transition.

hep-ex↗