arXiv subjects

A. Mazzi

Publications and source records attributed to A. Mazzi.

11 recordsLinked to original sources

arXiv2026

Deep VISTA observations of the Magellanic Clouds (VMCDeep)

The central regions of galaxies challenge observers with a high density of stars, gas and dust. The LMC hosts a dense stellar bar whereas the SMC hosts a dense core, which have eluded even the most sensitive large-scale wide-field surveys of individual stars from the ground and from space. This work describes deep imaging observations obtained with VISTA of the inner regions of the Clouds. They were obtained to resolve stars fainter than the red clump, that due to crowding were missed in previous observations, and to quantify features associated with the star formation, kinematics and structure of the galaxies. These studies will allow us to establish how the dynamical interactions between the LMC and the SMC, and the interaction between the Clouds and the Milky Way have influenced the most gravitationally bound regions. Multiple near-infrared images were obtained in the J and Ks filters during excellent weather conditions. The data were reduced using the VDFS which provides single-filter and band-merged calibrated images and catalogues, with associated confidence maps, for individual observations and combined observations for deep tiles. Approximately one million sources, with only minor quality issues and about 40 epochs per filter, are detected in the central 1.77 sq. deg. They provide a more contiguous spatial area coverage than sources in the VMC survey, which covers the same regions by overlapping two VISTA tiles per galaxy. The catalogues, which are made available with this work, contain attributes to select unique good quality detections for which we provide examples of ongoing scientific applications. These data represent valuable complementary information to deep imaging observations at other wavelengths and provide additional epochs for proper motion and photometric variability studies extending the time baseline to 11 yr, as well as targets for spectroscopic observations.

astro-ph.GA↗

arXiv2026

AGILE: an end-to-end Rubin-LSST simulation of AGNs, galaxies, and stars I. Software description and first data release

Contemporary large-scale surveys such as the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST) and Euclid present an unprecedented discovery potential for studying AGNs at the population level in the big data era. However, one major challenge is the accurate identification and classification of AGNs from optical/NIR photometry, or variability data alone. In order to optimize AGN selection, classification, and systematics, as well as to test different data analysis tools, we present AGILE (AGNs In the LSST Era), an LSST end-to-end simulation software. AGILE -- developed as part of the INAF LSST in-kind contribution -- is capable of simulating the anticipated AGN population in LSST and Euclid. We based AGILE on existing simulations of galaxies and stars, while we developed an AGN recipe based on empirical relations. AGILE populates complete galaxy samples with AGNs according to the observed AGN accretion rate distribution, and each AGN is assigned an optical/UV spectral energy distribution. Optical AGN variability is added using a damped random walk model connected to the AGN physical parameters. Finally, AGILE creates both LSST-like images and related data products. Using AGILE, we build a $24$ deg$^2$ complete mock truth catalog of AGNs, galaxies, and stars with $0.2 < z < 5.5$, $\log M/M_\odot > 8.5$ (AGNs and galaxies), and $r < 27.5$ mag (stars). We perform a pilot simulation (AGILE DR1) consisting of $1$ deg$^2$ of LSST operations in the COSMOS field observed up to three years according to the survey strategy. We use AGILE DR1 to quantify the accuracy of the LSST Science Pipelines in recovering true fluxes of AGNs, galaxies, and stars. We quantify the LSST completeness and purity in recovering Type 1 AGNs using typical color-color and variability selections. We share the AGILE DR1 dataset, an ideal test-bench for further scientific exploitation.

astro-ph.GA↗

arXiv2025

DUETS: Setting expectations for asteroseismic binaries and binary products with synthetic populations

Asteroseismology gives us the opportunity to better characterize binaries and their products, and shed light on their role in Galactic populations. We estimate occurrence rates, mass distributions, and evolutionary states of asteroseismic binaries, exhibiting solar-like oscillations from both components, and of products of binary interactions with detectable solar-like oscillations. Additionally, we explore the effects of mass accretion or loss on apparent age-metallicity relations. Using the TRILEGAL code, we simulate Kepler's field of view adopting the Eggleton and Moe & Di Stefano distributions of initial binary parameters, and run an additional simulation with non-interacting binaries for comparison. We find that asteroseismic binaries require an initial mass ratio close to one, and even small mass transfer events can prevent the detection of oscillations from both components. The fraction of asteroseismic binaries for red giant stars with detectable oscillations ranges from 0.5\% for non-interacting binaries to a minimum of 0.06% when taking interactions into account. Moreover, asteroseismic binaries composed of two red clump stars are not expected at separations $\leq 500~\text{R}_\odot$ due to the interplay of stellar evolution and binary interactions. Finally, we estimate that at least ~1% of the Kepler red giants with detectable oscillations have undergone significant mass accretion or loss, potentially affecting Galactic age-metallicity relations, although there is a strong dependence on the assumed initial binary parameters. Comparing predicted and observed asteroseismic binaries, as well as over- and under-massive stars, offers a way to constrain key binary evolution assumptions, and to reduce uncertainties in mass-transfer modeling.

astro-ph.SR↗

arXiv2025

Evolutionary tracks, ejecta, and ionizing photons from intermediate-mass to very massive stars with PARSEC

Recent advancements in stellar evolution modeling offer unprecedented accuracy in predicting the evolution and deaths of stars. We present new stellar evolutionary models computed with the updated PARSEC V2.0 code for a comprehensive and homogeneous grid of metallicities and initial masses. Nuclear reaction networks, mass loss prescriptions, and the treatment of elemental mixing have all been updated in PARSEC V2.0. We computed models for thirteen initial metallicities spanning $Z = 10^{-11}$ to $Z = 0.03$, with masses ranging from 2.0 M$_{\odot}$ to 2000 M$_{\odot}$, consisting of a library of over 1,100 ($\sim 2100$ tracks including pure-He models) full stellar evolution tracks. For each track, the evolution is followed from the pre-main-sequence to the most advanced early-asymptotic-giant-branch or the pre-supernova phases, depending on the stellar mass. Here, we describe the properties of the tracks and their chemical and structural evolution. We computed the final fates and the remnant masses and built the mass spectrum for each metallicity, finding that the combined black hole (BH) pair-instability mass gap spans just between 100 and 130 M$_{\odot}$. Moreover, the remnant masses provide models consistent with observed BH masses, such as those from the primaries of GW190521, Cygnus X-1, and $\textit{Gaia}$ BH3 binary systems. We computed and provided the chemical ejecta from stellar winds and explosive final fates, along with the ionizing photon rates. Our results show strong overall consistency with other tracks computed with different codes. A comparison with a large sample of observed massive stars in the Tarantula Nebula of the Large Magellanic Cloud shows that our tracks nicely reproduce the majority of stars that lie on the main sequence. All the models are publicly available and can be retrieved on the PARSEC database.

astro-ph.SR↗

arXiv2024

Light curve's recovery with Rubin-LSST: II. UnVEiling the darknesS of The gAlactic buLgE (VESTALE) with RR Lyrae

This work is part of VESTALE, a project initiated within the Rubin-LSST Cadence Strategy Optimization Process . Its goal is to explore the potential of Rubin-LSST observations aimed at the Galaxy's bulge (Bulge) for studying RR Lyrae stars (RRL). Observation and analysis of RR Lyrae stars in the Bulge are crucial for tracing the old population of the central part of our galaxy and reconstructing the history of Bulge formation. Based on observations conducted with CTIO/DECam by Saha et al. 2019 towards the Baade Window, our simulations demonstrate that early Rubin-LSST observations will enable the recovery of RR Lyrae light curves at Galactic center distances with sufficient precision. This will allow us to utilize theoretical relations from Marconi et al. 2022 to determine their distances and/or metallicity, following the REDIME algorithm introduced in Bono et al. 2019. We show how reddening and crowding affect our simulations and highlight the importance of considering these effects when deriving pulsation parameters (luminosity amplitudes, mean magnitudes) based on the light curves especially if the goal is to explore the opposite side of the Bulge through the observation of its RRL. The simulations discussed in this investigation were conducted to support the SCOC's decision to observe this important sky region since it has only recently been decided to include part of the Bulge as a target within the LSST main survey.

astro-ph.GA↗

arXiv2023

Rubin LSST observing strategies to maximize volume and uniformity coverage of Star Forming Regions in the Galactic Plane

A complete map of the youngest stellar populations of the Milky Way in the era of all-sky surveys, is one of the most challenging goals in modern astrophysics. The characterisation of the youngest stellar component is crucial not only for a global overview of the Milky Way structure, of the Galactic thin disk, and its spiral arms, but also for local studies. In fact, the identification of the star forming regions (SFRs) and the comparison with the environment in which they form are also fundamental to put them in the context of the surrounding giant molecular clouds and to understand still unknown physical mechanisms related to the star and planet formation processes. In 10 yrs of observations, Vera C. Rubin Legacy Survey of Space and Time (Rubin-LSST) will achieve an exquisite photometric depth that will allow us to significantly extend the volume within which we will be able to discover new SFRs and to enlarge the domain of a detailed knowledge of our own Galaxy. We describe here a metrics that estimates the total number of young stars with ages t < 10 Myr and masses >0.3M$_\odot$ that will be detected with the Rubin LSST observations in the gri bands at a 5 σ magnitude significance. We examine the results of our metrics adopting the most recent simulated Rubin-LSST survey strategies in order to evaluate the impact that different observing strategies might have on our science case.

astro-ph.GA↗

arXiv2022

SiPM cross-talk in liquid argon detectors

SiPM-based readouts are becoming the standard for light detection in particle detectors given their superior resolution and ease of use with respect to vacuum tube photo-multipliers. However, the contributions of detection noise such as the dark rate, cross-talk, and after-pulsing may impact significantly their performance. In this work, we present the development of highly reflective single-phase argon chambers capable of light yields up to 32 photo-electrons per keV, with roughly 12 being primary photo-electrons generated by the argon scintillation, while the rest are accounted by optical cross-talk. Furthermore, the presence of compound processes results in a generalized Fano factor larger than 2 already at an over-voltage of 5 V. Finally, we present a parametrization of the optical cross-talk for the FBK NUV-HD-Cryo SiPMs at 87 K that can be extended to future detectors with tailored optical simulations.

physics.ins-det↗

arXiv2022

Direct comparison of PEN and TPB wavelength shifters in a liquid argon detector

A large number of particle detectors employ liquid argon as their target material owing to its high scintillation yield and its ability to drift ionization charge over large distances. Scintillation light from argon is peaked at 128 nm and a wavelength shifter is required for its efficient detection. In this work, we directly compare the light yield achieved in two identical liquid argon chambers, one of which is equipped with PolyEthylene Naphthalate (PEN) and the other with TetraPhenyl Butadiene (TPB) wavelength shifter. Both chambers are lined with enhanced specular reflectors and instrumented with SiPMs with a coverage fraction of approximately 1%, which represents a geometry comparable to the future large scale detectors. We measured the light yield of the PEN chamber to be 39.4$\pm$0.4(stat)$\pm$1.9(syst)% of the yield of the TPB chamber. Using a Monte Carlo simulation this result is used to extract the wavelength shifting efficiency of PEN relative to TPB equal to 47.2$\pm$5.7%. This result paves the way for the use of easily available PEN foils as a wavelength shifter, which can substantially simplify the construction of future liquid argon detectors.

physics.ins-det↗

arXiv2022

Very large SiPM arrays with aggregated output

In this work we will document the design and the performances of a SiPM-based photodetector with a surface area of 100 cm$^2$ conceived to operate as a replacement for PMTs. The signals from 94 SiPMs are summed up to produce an aggregated output that exhibits in liquid nitrogen a dark count rate (DCR) lower than 100 cps over the entire surface, a signal to noise ratio better than 13, and a timing resolution better than 5.5 ns. The module feeds about 360 mW at 5 V with a dynamic range in excess of 500 photo-electrons on a 100 $Ω$ differential line. The unit is compatible with operations at room temperature, with a DCR increased by about 6 orders of magnitude.

physics.ins-det↗

arXiv2021

Characterization of Silicon Photomultipliers after proton irradiation up to $10^{12} n_{eq}/mm^2$

Silicon photomultipliers (SiPMs) are highly-sensitive photodetectors emerging as the technology of choice for many applications, including large high-energy physics experiments where they often are exposed to high radiation fluences. In recent years, there has been an increasing interest in assessing the performance deterioration of such detectors after the irradiation with proton or neutron, with different fluence levels. In this work, samples of different FBK SiPM technologies, made with different manufacturing technologies, were irradiated at the INFN-LNS facility (Italy) with protons reaching fluences up to $10^{12}n_{eq}/mm^2$ (1 MeV neutron equivalent) which correspond $10^{14}n_{eq}/cm^2$ to and their performances were characterized in detail after an approximately 30 days room temperature annealing. The results show a significant worsening of the primary noise (dark count rate) of the detectors, which increases with the irradiation dose, whereas the other performance parameters like the micro-cell gain, the correlated noise probability and the photon detection efficiency do not show significant variations over the investigated dose range. The breakdown voltage estimation after irradiation is another important aspect for a SiPM. In this contribution, we show several methods for its estimation and compare the results. We also introduced new methodologies to characterize the performance of the SiPMs when they present a very high level of noise. Lastly, we also analyzed the spatial localization of the proton-induced defects inside the device, i.e. the defects that mostly contribute to the increase of the DCR of the device, through the emission microscopy (EMMI) technique. In particular, we analyzed the SiPMs at the single cell level, trying to identify and spatially localize the defects.

physics.ins-det↗

arXiv2020

Cryogenic SiPM arrays for the DUNE photon detection system

In this paper we report on the characterization of SiPM tiles developed for the R & D on the DUNE Photon Detection System. The tiles were produced by Fondazione Bruno Kessler (FBK) employing NUV-HD-SF SiPMs. Special emphasis is given on cryo-reliability of the sensors, i.e. the stability of electric and mechanical properties after thermal cycles at room and 77K temperature. The characterization includes the determination of the I-V curve, a high sensitivity measurement of Dark Count Rate at different overvoltages, and correlated noise. The single p.e. sensitivity is measured as a function of the number of sensors connected to a single electronic channel, after amplification at 77K using a dedicated cold amplifier.

physics.ins-det↗