arXiv subjects

A. Meilland

Publications and source records attributed to A. Meilland.

At least 19 recordsLinked to original sources

arXiv2026

Interferometric Survey of Stellar Parameters: Mass of the metallic A-type binary $\beta$ Aur

With the capabilities of the new visible CHARA/SPICA instrument and the multiple spectral band operation of CHARA, our goal is to resolve orbits of short-period binaries and develop a robust framework for combining interferometric, spectroscopic, and photometric observations into a single consistent model. For our target sample, we selected suitable binaries based on brightness, angular separation, and orbital properties based on the expected performance of the CHARA/SPICA instrument. As a case study, we analysed the bright eclipsing binary $\beta$ Aurigae, composed of two slightly evolved A1 stars. We combined new interferometric observations of $\beta$ Aur obtained with CHARA/SPICA, MIRC-X, and MYSTIC with archival MIRC data, radial velocities, and light curves. We first derived astrometric positions from interferometric observables and computed an orbital solution. Afterwards, we implemented a unified model, capable of tying interferometric modelling with the ellc code to simultaneously fit all observables using MCMC sampling. We performed a detailed analysis of the noise statistics of each data set and in the end we adopted a profile likelihood approach to account for underestimated noise and systematics. We derived a consistent orbital and physical solution for $\beta$ Aur through joint modelling. The inclusion of interferometric data tightly constrains the angular semi-major axis and inclination. Using profile likelihood to account for the different intrinsic levels of uncertainty of the fundamentally different observables, we derived the masses of the two stars, $M_1 = 2.359 \pm 0.005$ M$_S$ and $M_2 = 2.293 \pm 0.004$ M$_S$, their radii $R_1 = 2.752 \pm 0.002$ R$_S$ and $R_2 = 2.622 \pm 0.002$ R$_S$, and the distance to the binary, $d = 24.30\pm0.05$ pc.

astro-ph.SR↗

arXiv2026

CHARA/SPICA: The six-telescope visible combiner and near-infrared fringe tracker for the CHARA Array

The suite called Stellar Parameters and Images with a Cophased Array (SPICA) has two interferometric instruments installed at the focus of the CHARA Array located at Mount Wilson, CA. SPICA is made of SPICA-VIS, a fiber-fed six-beam visible spectrograph with three spectral resolutions, and SPICA-FT, a six-beam near-infrared fringe tracker for the fast stabilization of the fringes. SPICA is opening access to imaging in the visible domain with an unprecedented angular resolution down to 0.2 milliarcseconds. It has been designed around a large survey of fundamental parameters of stars over the Hertzsprung- Russell diagram, aiming at understanding the deviations from the standard empirical relations of stellar physics as a function of activity: limb darkening, multiplicity, rotation, winds, and environments. SPICA makes use of the advanced technologies in electron multiplying detectors in the visible and electron- avalanche photodiode arrays in the near-infrared. It benefits from the newly commissioned adaptive optics on the one-meter telescopes of the array. The modules of the visible instrument, SPICA-VIS, optimize the injection of light into single-mode fibers for spatial filtering before spectral dispersion in the image plane. The fringe tracker, SPICA-FT, performs group-delay and phase-delay tracking for six beams in the H band. SPICA-FT can use an all-in-one or ABCD encoding of the fringe signals. SPICA is operational on sky and is close to reaching the expected performance in low spectral resolution, in particular, for the Interferometric Survey of Stellar Parameters (ISSP). More work is still needed to achieve the ultimate performance in terms of sensitivity and to allow operations with higher spectral resolutions.

astro-ph.IM↗

arXiv2025

The complex inner disk of the Herbig Ae star HD 100453 with VLTI/MATISSE

The inner regions of planet-forming disks hold invaluable insights for our understanding of planet formation. The disk around the Herbig star HD 100453 presents one such environment, with an inner disk that is significantly misaligned with respect to the outer disk. This paper expands the existing H-band (PIONIER) and K-band (GRAVITY) interferometric studies of the HD 100453 inner disk to the L-band with the MATISSE VLTI instrument. With snapshot data spanning approximately four years we aim for a more comprehensive understanding of the inner disk structures and their potential time evolution. Based on the MATISSE data obtained, we use a combination of analytical models and image reconstruction to constrain the disk structure. Additionally, we fit a temperature gradient model to the selected wavelength range of PIONIER, GRAVITY and MATISSE to derive physical properties of the inner regions. Our parametric model finds an inclination of $\sim 47.5^\circ$ and a position angle of $\sim 83.6^\circ$, which corroborates the case of strong inner-outer disk misalignment. From the symmetric temperature gradient we derive an inner disk radius around $\sim0.27$ au, with dust surface densities of $\Sigma_{\rm{subl}} \approx 10^{-3.2}$ g/cm$^2$ and vertical optical depth $\tau_{\rm{z, subl}} \approx 0.1-0.06$. Same-night MATISSE and GRAVITY observations indicate the necessity for higher-order asymmetries to explain the interferometric signals, which is further supported by a MATISSE snapshot image reconstruction. The chromatic interferometric data reveal the likely need for higher-order asymmetries to explain the inner disk of HD~100453, suggesting a possible origin in dynamic interactions or disk instabilities. Coordinated multi-wavelength infrared interferometric observations with GRAVITY and MATISSE will be crucial to confirm these findings and uncover its underlying nature.

astro-ph.SR↗

arXiv2025

The MATISSE view of the inner region of the RY Tau protoplanetary disk

The T-Tauri type young stellar object RY Tau exhibits a dust depleted inner cavity characteristic of a transition disk. We constrain the spatial distribution and mineralogy of dust in the RY Tau protoplanetary disk in the inner few astronomical units using spectrally resolved interferometric observations in the L, M, and N bands obtained with VLTI/MATISSE. Employing a 2D temperature gradient model we estimate the orientation of the inner disk finding no evidence of significant misalignment between the inner and outer disk of RY Tau. Successively, we analyze the chemical composition of silicates depending on spatial region in the disk and identify several silicate species commonly found in protoplanetary disks. Additionally, a depletion of amorphous dust grains toward the central protostar is observed. Monte Carlo radiative transfer simulations show that hot dust close to the protostar and in the line of sight to the observer, either in the uppermost disk layers of a strongly flared disk or in a dusty envelope, is necessary to model the observations. The shadow cast by a dense innermost disk midplane on the dust further out explains the observed closure phases in the L band and to some extent in the M band. However, the closure phases in the N band are underestimated by our model, hinting at an additional asymmetry in the flux density distribution not visible at shorter wavelengths.

astro-ph.EP↗

arXiv2025

Multi-band infrared imaging reveals dusty spiral arcs around the binary B[e] star 3 Puppis

3 Puppis is the brightest known B[e] star. Recent work classifies this A-type object as a supergiant, yet the impact of its binarity on the circumstellar environment (CE) remains hard to characterize. To resolve its dusty region at 5-10 mas, we obtained mid-IR interferometric observations with VLTI/MATISSE over 3-12 {\mu}m. Because the (u,v) coverage supports imaging, we introduce a statistical interferometric-imaging workflow based on MiRA to generate averaged images: this systematic approach enables the selection of an optimal set of reconstructions, improving the robustness and fidelity of the recovered features. We also use SPARCO, an independent tool well suited to bright central objects embedded in fainter extended emission. Images from both tools in the L, M, and N bands agree and reveal an asymmetric, elongated feature ~17 mas (~10 au at 631 pc) southeast of the star with ~20% density contrast. A second northwest asymmetry and a skewed inner rim are detected. Simple geometric modelling, guided by the MATISSE images, constrains the morphology, location, and flux of the CE and its asymmetries. The images are consistent with earlier VLTI measurements but expose a more complex CE with large-scale clumps in the southeast and northwest parts of the disc. Hydrodynamic modelling indicates that tidal spiral-wake perturbations from the central binary, dynamically excited at Lindblad resonances in the circumbinary disc, best explain the radial extent and curvature of the elongated structures seen in all bands.

astro-ph.SR↗

arXiv2025

The mid-infrared spectrum of $\beta$ Pictoris b. First VLTI/MATISSE interferometric observations of an exoplanet

Few spectra of directly-imaged exoplanets have been obtained in the mid-infrared (> 3 $\mu$m). This region is particularly rich in molecular spectral signatures, whose measurements can help recover atmospheric parameters and provide a better understanding of giant planet formation and atmospheric dynamics. In the past years, exoplanet interferometry with the VLTI/GRAVITY instrument has provided medium-resolution spectra of a dozen substellar companions in the near infrared. The 100-meter interferometric baselines allow for the stellar and planetary signals to be efficiently disentangled at close angular separations (< 0.3''). We aim to extend this technique to the mid-infrared using MATISSE, the VLTI's mid-infrared spectro-interferometer. We take advantage of the fringe tracking and off-axis pointing capabilities recently brought by the GRA4MAT upgrade. Using this new mode, we observed the giant planet $\beta$ Pictoris b in L and M bands (2.75-5 $\mu$m) at a spectral resolution of 500. We developed a method to correct chromatic dispersion and non-common paths effects in the fringe phase and modelled the planet astrometry and stellar contamination. We obtained a high-signal-to-noise spectrum of $\beta$ Pictoris b, showing the planet continuum in L (for the first time) and M bands, which contains broad absorption features of H$_2$O and CO. In conjunction with a new GRAVITY spectrum, we modelled it with the ForMoSA nested sampling tool and the Exo-REM grid of atmospheric models, and found a solar carbon-to-oxygen ratio in the planet atmosphere. This study opens the way to the characterization of fainter and closer-in planets with MATISSE, which could complement the JWST at angular separations too close for it to obtain exoplanet spectra. Starting in 2025, the new adaptive optics system brought by the GRAVITY+ upgrade will further extend the detection limits of MATISSE.

astro-ph.EP↗

arXiv2024

GRAVITY for MATISSE -- Improving the MATISSE performance with the GRAVITY fringe tracker

Context: MATISSE, the mid-infrared spectro-imaging instrument of VLTI, was designed to deliver its advertised performance when paired with an external second generation fringe tracker. Science observation started in 2019, demonstrating imaging capabilities and faint science target observations. Now, The GRAVITY fringe tracker stabilizes the MATISSE fringes which allows using all spectroscopic modes and improves sensitivity and data accuracy. Aims: We present how the MATISSE and GRAVITY instruments were adapted to make the GRAVITY fringe tracker work with MATISSE, under the umbrella of the aptly-named GRA4MAT project, led by ESO in collaboration with the two instrument consortia. Methods: We detail the software modifications needed to implement an acquisition and observing sequence specific to GRA4MAT, including simultaneous fringe tracking and chopping and a narrow off-axis capability inspired by the galactic center and exoplanet capability of GRAVITY. We explain the modified data collection and reduction processes. We show how we leveraged the recent fringe tracker upgrade to implement features specific to its use with MATISSE, e.g. fringe jumps mitigation with an improved group delay control and simultaneous fringe tracking and chopping with a new state machine. Results: We successfully demonstrate significant improvements to the MATISSE instrument. Observations can now be performed at higher spectral resolutions of up to $R\sim3300$ and across the full LM bands at once. Long detector integration times, made possible with stabilized fringes, have improved the LM-bands sensitivity by a factor of 10. Low flux biases in coherently-reduced N-band data have been eliminated. The L-band transfer function is now higher and more stable. We finally illustrate the scientific potential of GRA4MAT with a preview of the first exoplanet observation made by MATISSE on $\beta$ Pictoris b.

astro-ph.IM↗

arXiv2024

Images of Betelgeuse with VLTI/MATISSE across the Great Dimming

From Nov. 2019 to May 2020, the red supergiant star Betelgeuse experienced an unprecedented drop of brightness in the visible domain called the great dimming event. Large atmospheric dust clouds and large photospheric convective features are suspected to be responsible for it. To better understand the dimming event, we used mid-infrared long-baseline spectro-interferometric measurements of Betelgeuse taken with the VLTI/MATISSE instrument before (Dec. 2018), during (Feb. 2020), and after (Dec. 2020) the GDE. We present data in the 3.98 to 4.15\,$μ$m range to cover SiO spectral features molecules as well as adjacent continuum. We have employed geometrical models, image reconstruction, as well as radiative transfer models to monitor the spatial distribution of SiO over the stellar surface. We find a strongly in-homogeneous spatial distribution of SiO that appears to be looking very different between our observing epochs, indicative of a vigorous activity in the stellar atmosphere. The contrast of our images is small in the pseudo-continuum for all epochs, implying that our MATISSE observations support both cold spot and dust cloud model.

astro-ph.SR↗

arXiv2022

Locating dust and molecules in the inner circumstellar environment of R~Sculptoris with MATISSE

AGB stars are one of the main sources of dust production in the Galaxy. However, it is not clear what this process looks like and where the dust is condensing in the circumstellar environment. By characterizing the location of the dust and the molecules in the close environment of an AGB star, we aim to achieve a better understanding the history of the dust formation process. We observed the carbon star R Scl with the VLTI-MATISSE instrument in L- and N-bands. The high angular resolution of the VLTI observations, combined with a large uv-plane coverage allowed us to use image reconstruction methods. To constrain the dust and molecules' location, we used two different methods: MIRA image reconstruction and the 1D code RHAPSODY. We found evidence of C2H2 and HCN molecules between 1 and 3.4 Rstar which is much closer to the star than the location of the dust (between 3.8 and 17.0 Rstar). We also estimated a mass-loss rate of 1.2+-0.4x10-6 Msun per yr. In the meantime, we confirmed the previously published characteristics of a thin dust shell, composed of amorphous carbon (amC) and silicon carbide (SiC). However, no clear SiC feature has been detected in the MATISSE visibilities. This might be caused by molecular absorption that can affect the shape of the SiC band at 11.3 micron. The appearance of the molecular shells is in good agreement with predictions from dynamical atmosphere models. For the first time, we co-located dust and molecules in the environment of an AGB star. We confirm that the molecules are located closer to the star than the dust. The MIRA images unveil the presence of a clumpy environment in the fuzzy emission region beyond 4.0 Rstar. Furthermore, with the available dynamic range and angular resolution, we did not detect the presence of a binary companion. Additional observations combining MATISSE and SAM-VISIR instrument should enable this detection in future studies.

astro-ph.SR↗

arXiv2022

The disk of FU Orionis viewed with MATISSE/VLTI: first interferometric observations in $L$ and $M$ bands

The disk of FU Orionis is marginally resolved with MATISSE, suggesting that the region emitting in the thermal infrared is rather compact. An upper limit of $\sim1.3\pm0.1$ mas (in $L$) can be given for the diameter of the disk region probed in the $L$ band, corresponding to 0.5 au at the adopted Gaia EDR3 distance. This represents the hot, gaseous region of the accretion disk. The $N$-band data indicate that the dusty passive disk is silicate-rich. Only the innermost region of said dusty disk is found to emit strongly in the $N$ band, and it is resolved at an angular size of $\sim5$ mas, which translates to a diameter of about 2 au. The observations therefore place stringent constraints for the outer radius of the inner accretion disk. Dust radiative transfer simulations with RADMC-3D provide adequate fits to the spectral energy distribution from the optical to the submillimeter and to the interferometric observables when opting for an accretion rate $\dot{M}\sim 2\times 10^{-5}\, M_\odot$ yr$^{-1}$ and assuming $M_*=0.6\, M_\odot$. Most importantly, the hot inner accretion disk's outer radius can be fixed at 0.3 au. The outer radius of the dusty disk is placed at 100 au, based on constraints from scattered-light images in the literature. The dust mass contained in the disk is $2.4\times10^{-4}\, M_\odot$, and for a typical gas-to-dust ratio of 100, the total mass in the disk is approximately 0.02 $M_\odot$. We did not find any evidence for a nearby companion in the current interferometric data, and we tentatively explored the case of disk misalignment. For the latter, our modeling results suggest that the disk orientation is similar to that found in previous imaging studies by ALMA. Should there be an asymmetry in the very compact, inner accretion disk, this might be resolved at even smaller spatial scales ($\leq1$ mas).

astro-ph.SR↗

arXiv2022

MATISSE, the VLTI mid-infrared imaging spectro-interferometer

Context:Optical interferometry is at a key development stage. ESO's VLTI has established a stable, robust infrastructure for long-baseline interferometry for general astronomical observers. The present second-generation instruments offer a wide wavelength coverage and improved performance. Their sensitivity and measurement accuracy lead to data and images of high reliability. Aims:We have developed MATISSE, the Multi AperTure mid-Infrared SpectroScopic Experiment, to access high resolution imaging in a wide spectral domain and explore topics such: stellar activity and mass loss; planet formation and evolution in the gas and dust disks around young stars; accretion processes around super massive black holes in AGN. Methods:The instrument is a spectro-interferometric imager covering three atmospheric bands (L,M,N) from 2.8 to 13.0 mu, combining four optical beams from the VLTI's telscopes. Its concept, related observing procedure, data reduction and calibration approach are the product of 30 years of instrumental research. The instrument utilizes a multi-axial beam combination that delivers spectrally dispersed fringes. The signal provides the following quantities at several spectral resolutions: photometric flux, coherent fluxes, visibilities, closure phases, wavelength differential visibilities and phases, and aperture-synthesis imaging. Results:We provide an overview of the physical principle of the instrument and its functionalities, the characteristics of the delivered signal, a description of the observing modes and of their performance limits. An ensemble of data and reconstructed images are illustrating the first acquired key observations. Conclusion:The instrument has been in operation at Cerro Paranal, ESO, Chile since 2018, and has been open for science use by the international community since April 2019. The first scientific results are being published now.

astro-ph.IM↗

arXiv2022

Improving the diameters of interferometric calibrators with MATISSE

A good knowledge of the angular diameters of stars used to calibrate the observables in stellar interferometry is fundamental. As the available precision for giant stars is worse than the required per cent level, we aim to improve the knowledge of many diameters using MATISSE (Multiple AperTure mid-Infrared SpectroScopic Experiment) data in its different instrumental configurations. Using the squared visibility MATISSE observable, we compute the angular diameter value, which ensures the best-fitting curves, assuming an intensity distribution of a uniform disc. We take into account that the transfer function varies over the wavelength and is different from one instrumental configuration to another. The uncertainties on the diameters are estimated using the residual bootstrap method. Using the low spectral resolution mode in the L band, we observed a set of 35 potential calibrators selected in the Mid-infrared stellar Diameter and Flux Compilation Catalogue with diameters ranging from about 1 to 3 mas. We reach a precision on the diameter estimates in the range 0.6 per cent to 4.1 per cent. The study of the stability of the transfer function in visibility over two nights makes us confident in our results. In addition, we identify one star, 75 Vir initially present in the calibrator lists, for which our method does not converge, and prove to be a binary star. This leads us to the conclusion that our method is actually necessary to improve the quality of the astrophysical results obtained with MATISSE, and that it can be used as a useful tool for 'bad calibrator' detection.

astro-ph.IM↗

arXiv2021

The extended atmosphere and circumstellar environment of the cool evolved star VX Sagittarii as seen by MATISSE

Context. VX Sgr is a cool, evolved, and luminous red star whose stellar parameters are difficult to determine, which affects its classification. Aims. We aim to spatially resolve the photospheric extent as well as the circumstellar environment. Methods. We used interferometric observations obtained with the MATISSE instrument in the L (3 to 4 μm), M (4.5 to 5 μm), and N (8 to 13 μm) bands. We reconstructed monochromatic images using the MIRA software. We used 3D radiation-hydrodynamics (RHD) simulations carried out with CO5BOLD and a uniform disc model to estimate the apparent diameter and interpret the stellar surface structures. Moreover, we employed the radiative transfer codes Optim3D and Radmc3D to compute the spectral energy distribution for the L, M, and N bands, respectively. Results. MATISSE observations unveil, for the first time, the morphology of VX Sgr across the L, M, and N bands. The reconstructed images show a complex morphology with brighter areas whose characteristics depend on the wavelength probed. We measured the angular diameter as a function of the wavelength and showed that the photospheric extent in the L and M bands depends on the opacity through the atmosphere. In addition to this, we also concluded that the observed photospheric inhomogeneities can be interpreted as convection-related surface structures. The comparison in the N band yielded a qualitative agreement between the N band spectrum and simple dust radiative transfer simulations. However, it is not possible to firmly conclude on the interpretation of the current data because of the difficulty in constraing the model parameters using the limited accuracy of our absolute flux calibration. Conclusions. MATISSE observations and the derived reconstructed images unveil the appearance of the stellar surface and circumstellar environment across a very large spectral domain for the first time.

astro-ph.SR↗

arXiv2021

VLTI-MATISSE L- and N-band aperture-synthesis imaging of the unclassified B[e] star FS Canis Majoris

Context: FS Canis Majoris (FS CMa, HD 45677) is an unclassified B[e] star surrounded by an inclined dust disk. The evolutionary stage of FS CMa is still debated. Perpendicular to the circumstellar disk, a bipolar outflow was detected. Infrared aperture-synthesis imaging provides us with a unique opportunity to study the disk structure. Aims: Our aim is to study the intensity distribution of the disk of FS CMa in the mid-infrared L and N bands. Methods: We performed aperture-synthesis imaging of FS CMa with the MATISSE instrument (Multi AperTure mid-Infrared SpectroScopic Experiment) in the low spectral resolution mode to obtain images in the L and N bands. We computed radiative transfer models that reproduce the L- and N-band intensity distributions of the resolved disks. Results: We present L- and N-band aperture-synthesis images of FS CMa reconstructed in the wavelength bands of 3.4-3.8 and 8.6-9.0 micrometer. In the L-band image, the inner rim region of an inclined circumstellar disk and the central object can be seen with a spatial resolution of 2.7 milliarcsec (mas). An inner disk cavity with an angular diameter of 6x12mas is resolved. The L-band disk consists of a bright northwestern (NW) disk region and a much fainter southeastern (SE) region. The images suggest that we are looking at the bright inner wall of the NW disk rim, which is on the far side of the disk. In the N band, only the bright NW disk region is seen. In addition to deriving the inclination and the inner disk radius, fitting the reconstructed brightness distributions via radiative transfer modeling allows one to constrain the innermost disk structure, in particular the shape of the inner disk rim.

astro-ph.SR↗

arXiv2021

First MATISSE L-band observations of HD 179218. Is the inner 10 au region rich in carbon dust particles?

Carbon is one of the most abundant components in the Universe. While silicates have been the main focus of solid phase studies in protoplanetary discs (PPDs), little is known about the solid carbon content especially in the planet-forming regions ($\sim $0.1 to 10 au). Fortunately, several refractory carbonaceous species present C-H bonds (such as hydrogenated nano-diamond and amorphous carbon as well as polycyclic aromatic hydrocarbons (PAHs)), which generate infrared (IR) features that can be used to trace the solid carbon reservoirs. The new mid-IR instrument MATISSE, installed at the Very Large Telescope Interferometer (VLTI), can spatially resolve the inner regions ($\sim$ 1 to 10 au) of PPDs and locate, down to the au-scale, the emission coming from carbon grains. Our aim is to provide a consistent view on the radial structure, down to the au-scale, as well as basic physical properties and the nature of the material responsible for the IR continuum emission in the inner disk region around HD 179218. We implemented a temperature-gradient model to interpret the disk IR continuum emission, based on a multiwavelength dataset comprising a broadband spectral energy distribution (SED) and VLTI H-, L-, and N-bands interferometric data obtained in low spectral resolution. Then, we added a ring-like component, representing the carbonaceous L-band features-emitting region, to assess its detectability in future higher spectral resolution observations employing mid-IR interferometry.

astro-ph.EP↗

arXiv2021

Mid-infrared circumstellar emission of the long-period Cepheid l Carinae resolved with VLTI/MATISSE

The nature of circumstellar envelopes (CSE) around Cepheids is still a matter of debate. The physical origin of their infrared (IR) excess could be either a shell of ionized gas, or a dust envelope, or both. This study aims at constraining the geometry and the IR excess of the environment of the long-period Cepheid $\ell$ Car (P=35.5 days) at mid-IR wavelengths to understand its physical nature. We first use photometric observations in various bands and Spitzer Space Telescope spectroscopy to constrain the IR excess of $\ell$ Car. Then, we analyze the VLTI/MATISSE measurements at a specific phase of observation, in order to determine the flux contribution, the size and shape of the environment of the star in the L band. We finally test the hypothesis of a shell of ionized gas in order to model the IR excess. We report the first detection in the L band of a centro-symmetric extended emission around l Car, of about 1.7$R_\star$ in FWHM, producing an excess of about 7.0\% in this band. In the N band, there is no clear evidence for dust emission from VLTI/MATISSE correlated flux and Spitzer data. On the other side, the modeled shell of ionized gas implies a more compact CSE ($1.13\pm0.02\,R_\star$) and fainter (IR excess of 1\% in the L band). We provide new evidences for a compact CSE of $\ell$ Car and we demonstrate the capabilities of VLTI/MATISSE for determining common properties of CSEs. While the compact CSE of $\ell$ Car is probably of gaseous nature, the tested model of a shell of ionized gas is not able to simultaneously reproduce the IR excess and the interferometric observations. Further Galactic Cepheids observations with VLTI/MATISSE are necessary for determining the properties of CSEs, which may also depend on both the pulsation period and the evolutionary state of the stars.

astro-ph.SR↗

arXiv2020

The asymmetric inner disk of the Herbig Ae star HD 163296 in the eyes of VLTI/MATISSE: evidence for a vortex?

Context. The inner few au region of planet-forming disks is a complex environment. High angular resolution observations have a key role in understanding the disk structure and the dynamical processes at work. Aims. In this study we aim to characterize the mid-infrared brightness distribution of the inner disk of the young intermediate-mass star HD 163296, from VLTI/MATISSE observations. Methods. We use geometric models to fit the data. Our models include a smoothed ring, a flat disk with inner cavity, and a 2D Gaussian. The models can account for disk inclination and for azimuthal asymmetries as well. We also perform numerical hydro-dynamical simulations of the inner edge of the disk. Results. Our modeling reveals a significant brightness asymmetry in the L-band disk emission. The brightness maximum of the asymmetry is located at the NW part of the disk image, nearly at the position angle of the semimajor axis. The surface brightness ratio in the azimuthal variation is $3.5 \pm 0.2$. Comparing our result on the location of the asymmetry with other interferometric measurements, we confirm that the morphology of the $r<0.3$ au disk region is time-variable. We propose that this asymmetric structure, located in or near the inner rim of the dusty disk, orbits the star. For the physical origin of the asymmetry, we tested a hypothesis where a vortex is created by Rossby wave instability, and we find that a unique large scale vortex may be compatible with our data. The half-light radius of the L-band emitting region is $0.33\pm 0.01$ au, the inclination is ${52^\circ}^{+5^\circ}_{-7^\circ}$, and the position angle is $143^\circ \pm 3^\circ$. Our models predict that a non-negligible fraction of the L-band disk emission originates inside the dust sublimation radius for $μ$m-sized grains. Refractory grains or large ($\gtrsim 10\ μ$m-sized) grains could be the origin for this emission.

astro-ph.SR↗

arXiv2020

Calibrating the surface brightness - color relation for late-type red giants stars in the visible domain using VEGA/CHARA interferometric observations

The surface brightness - color relationship (SBCR) is a poweful tool for determining the angular diameter of stars from photometry. It was for instance used to derive the distance of eclipsing binaries in the Large Magellanic Cloud (LMC), which led to its distance determination with an accuracy of 1%. We calibrate the SBCR for red giant stars in the 2.1 < V-K < 2.5 color range using homogeneous VEGA/CHARA interferometric data secured in the visible domain, and compare it to the relation based on infrared interferometric observations, which were used to derive the distance to the LMC. Observations of eight G-K giants were obtained with the VEGA/CHARA instrument. The derived limb-darkened angular diameters were combined with a homogeneous set of infrared magnitudes in order to constrain the SBCR. The average precision we obtain on the limb-darkened angular diameters of the eight stars in our sample is 2.4%. For the four stars in common observed by both VEGA/CHARA and PIONIER/VLTI, we find a 1 sigma agreement for the angular diameters. The SBCR we obtain in the visible has a dispersion of 0.04 magnitude and is consistent with the one derived in the infrared (0.018 magnitude). The consistency of the infrared and visible angular diameters and SBCR reinforces the result of 1% precision and accuracy recently achieved on the distance of the LMC using the eclipsing-binary technique. It also indicates that it is possible to combine interferometric observations at different wavelengths when the SBCR is calibrated.

astro-ph.SR↗