arXiv subjects

A. Men'shchikov

Publications and source records attributed to A. Men'shchikov.

At least 19 recordsLinked to original sources

arXiv2026

ALMA-IMF XXII. Role of core subfragmentation in the IMF origin: Hierarchical fragmentation cascade and CMF in W43-MM1

We aim to predict how the currently observed top-heavy CMF in the massive protocluster W43-MM1 evolves due to core subfragmentation. We used getsf to extract sources in 5 ALMA images of W43-MM1 at 3mm, with a spatial resolution ranging from 14kau to 270au. Then, we applied FAMILY, a graph-theory-based analysis tool, to create and characterize networks of nested sources in W43-MM1. We compared the hierarchical fragmentation cascade of W43-MM1 to those measured in NGC2264 and in synthetic images of a MHD protocluster. Assuming self-similarity, we measure a small fractality index of F3D = 1.19 +/-0.10 in W43-MM1, which means that, on average, a cloud structure will fragment into only 1.19 fragments each time the physical scale decreases by a factor of two. In line with values measured above the core scale in the NGC 2264 and synthetic protoclusters, the W43-MM1 fractality index increases by ~30% at larger scales. We also estimate an imbalanced mass partition between siblings, with 2/3 of the mass of siblings at a given scale belonging to the dominant sibling. The mass transfer efficiency, computed from one physical scale to another, is high and corresponds to a CFE from 2.4kau cores to 200au seeds of ~16%. Based on the measured fractality and efficiency values, the gravo-turbulent model predicts that its fragmentation below ~14kau is not driven by turbulence but by gravity. Using these parameters and the measured mass partition, we demonstrate that the seed mass function, from which the IMF emerges, has a high-mass end which remains top-heavy. Therefore, based on our current assumptions, core subfragmentation in W43-MM1, and perhaps more broadly in massive Galactic protoclusters, plays a minimal role in shaping the high-mass slope of the IMF.

astro-ph.GA↗

arXiv2024

ALMA-IMF XVI: Mass-averaged temperature of cores and protostellar luminosities in the ALMA-IMF protoclusters

ALMA-IMF imaged 15 massive protoclusters down to a resolution of of 2 kau scales, identifying about 1000 star-forming cores. The mass and luminosity of these cores, which are fundamental physical characteristics, are difficult to determine, a problem greatly exacerbated at the distances >2 kpc of ALMA-IMF protoclusters. We combined new datasets and radiative transfer modeling to characterize these cores. We estimated their mass-averaged temperature and the masses these estimates imply. For 1/6 of the sample, we measured the bolometric luminosities, implementing deblending corrections when necessary. We used spectral energy distribution (SED) analysis obtained with the PPMAP Bayesian procedure, which aims to preserve the best angular resolution of the input data. We extrapolated the luminosity and dust temperature images provided by PPMAP at 2.5" resolution to estimate those of individual cores, which were identified at higher angular resolution. To do this, we applied approximate radiative transfer relationships between the luminosity of a protostar and the temperature of its surrounding envelope and between the external heating of prestellar cores and their temperatures. For the first time, we provide data-informed estimates of dust temperatures for 883 cores identified with ALMA-IMF: 17-31 K and 28-79 K (5th and 95th percentiles, up to 127 K) for the 617 prestellar and 266 protostellar cores, respectively. We also measured protostellar luminosities spanning 20-80 000 Lsun. For hot cores, we estimated systematically lower temperatures than studies based on complex organic molecules. We established a mass-luminosity evolutionary diagram, for the first time at the core spatial resolution and for a large sample of high-mass protostellar cores. The ALMA-IMF data favor a scenario in which protostars accrete their mass from a larger mass reservoir than their host cores.

astro-ph.GA↗

arXiv2024

ALMA-IMF XV: The core mass function in the high-mass star-formation regime

The stellar initial mass function (IMF) is critical to our understanding of star formation and the effects of young stars on their environment. On large scales, it enables us to use tracers such as UV or Halpha emission to estimate the star formation rate of a system and interpret unresolved star clusters across the universe. So far, there is little firm evidence of large-scale variations of the IMF, which is thus generally considered universal. Stars form from cores and it is now possible to estimate core masses and compare the core mass function (CMF) with the IMF, which it presumably produces. The goal of the ALMA-IMF large program is to measure the core mass function at high linear resolution (2700 au) in 15 typical Milky Way protoclusters spanning a mass range of 2500 to 32700 Msun. In this work, we used two different core extraction algorithms to extract about 680 gravitationally bound cores from these 15 protoclusters. We adopt per core temperature using the temperature estimate from the PPMAP Bayesian method. A power-law fit to the CMF of the sub-sample of cores above the 1.64 Msun completeness limit, 330 cores, through the maximum likelihood estimate technique yields a slope of 1.97 +/- 0.06, significantly flatter than the 2.35 Salpeter slope. Assuming a self-similar mapping between the CMF and the IMF, this result implies that these 15 high-mass protoclusters will generate atypical IMFs. This sample is the largest to date produced and analysed self-consistently, derived at matched physical resolution, with per-core temperature estimates and cores as massive as 150 Msun. We provide the raw source extraction catalogues and the source derived size, temperature, mass, and spectral indices in the 15 protoclusters.

astro-ph.GA↗

arXiv2024

ALMA-IMF XII: Point-process mapping of 15 massive protoclusters

A crucial aspect in addressing the challenge of measuring the core mass function, that is pivotal for comprehending the origin of the initial mass function, lies in constraining the temperatures of the cores. We aim to measure the luminosity, mass, column density and dust temperature of star-forming regions imaged by the ALMA-IMF large program. High angular resolution mapping is required to capture the properties of protostellar and pre-stellar cores and to effectively separate them from larger features, such as dusty filaments. We employed the point process mapping (PPMAP) technique, enabling us to perform spectral energy distribution fitting of far-infrared and submillimeter observations across the 15 ALMA-IMF fields, at an unmatched 2.5" angular resolution. By combining the modified blackbody model with near-infrared data, we derived bolometric luminosity maps. We estimated the errors impacting values of each pixel in the temperature, column density, and luminosity maps. Subsequently, we employed the extraction algorithm getsf on the luminosity maps in order to detect luminosity peaks and measure their associated masses. We obtained high-resolution constraints on the luminosity, dust temperature, and mass of protoclusters, that are in agreement with previously reported measurements made at a coarser angular resolution. We find that the luminosity-to-mass ratio correlates with the evolutionary stage of the studied regions, albeit with intra-region variability. We compiled a PPMAP source catalog of 313 luminosity peaks using getsf on the derived bolometric luminosity maps. The PPMAP source catalog provides constraints on the mass and luminosity of protostars and cores, although one source may encompass several objects. Finally, we compare the estimated luminosity-to-mass ratio of PPMAP sources with evolutionary tracks and discuss the limitations imposed by the 2.5" beam.

astro-ph.GA↗

arXiv2024

Herschel Gould Belt Survey in Taurus. II: A census of dense cores and filaments in the TMC1 region

We present a catalogue of dense cores and filaments in a $3.8^{\circ}\times2.4^{\circ}$ field around the TMC1 region of the Taurus Molecular Cloud. The catalogue was created using photometric data from the Herschel SPIRE and PACS instruments in the 70 $μ$m, 160 $μ$m, 250 $μ$m, 350 $μ$m, and 500 $μ$m continuum bands. Extended structure in the region was reconstructed from a Herschel column density map. Power spectra and PDFs of this structure are presented. The PDF splits into log-normal and power-law forms, with the high-density power-law component associated primarily with the central part of TMC1. The total mass in the mapped region is 2000 M$_\odot$, of which 34% is above an extinction of AV $\sim$ 3 mag -- a level that appears as a break in the PDF and as the minimum column density at which dense cores are found. A total of 35 dense filaments were extracted from the column density map. These have a characteristic FWHM width of 0.07 pc, but the TMC1 filament itself has a mean FWHM of $\sim$ 0.13 pc. The thermally supercritical filaments in the region are aligned orthogonal to the prevailing magnetic field direction. Derived properties for the supercritical TMC1 filament support the scenario of it being relatively young. A catalogue of 44 robust and candidate prestellar cores is created and is assessed to be complete down to 0.1 M$_\odot$. The combined prestellar CMF for the TMC1 and L1495 regions is well fit by a single log-normal distribution and is comparable to the standard IMF.

astro-ph.GA↗

arXiv2024

ALMA-IMF X -- The core population in the evolved W33-Main (G012.80) protocluster

We aimed to measure the CMF in the evolved W33-Main star-forming protocluster to compare it with CMF recently obtained in other Galactic star-forming regions, including the ones included in the ALMA-IMF program. We used observations from the ALMA-IMF large program: 2'x2' maps of emission from the continuum and selected lines at 1.3mm and 3mm observed by the ALMA 12m only antennas. Our angular resolution was typically 1'', that is 2400au at a distance of 2.4kpc. The lines we analysed are CO(2-1), SiO(5-4), N2H+(1-0), H41alpha as well as He41alpha blended with C41alpha. We built a census of dense cores in the region, and we measured the associated CMF based on a core-dependent temperature value. We confirmed the 'evolved' status of W33-Main by identifiying three HII regions within the field, and to a lesser extent based on the number and extension of N2H+ filaments. We produced a filtered core catalog of 94 candidates, that we refined to take into account the contamination of the continuum by free-free and line emission, obtaining 80 cores with masses that range from 0.03 to 13.2Msun. We fitted the resulting high-mass end of the CMF with a single power law of the form N(log(M)) ~ M^alpha, obtaining alpha = -1.44(+0.16)(-0.22), slightly steeper but consistent with the Salpeter index. We categorized our cores in pre- and protostellar, mostly based on outlow activity and hot core nature. We found the prestellar CMF to be steeper than a Salpeter-like distribution, and the protostellar CMF to be slightly top heavy. We found a higher proportion of cores within the HII regions and their surroundings than in the rest of the field. We also found that the cores' masses were rather low (maximum mass of 13Msun).

astro-ph.GA↗

arXiv2023

ALMA-IMF II -- investigating the origin of stellar masses: Continuum Images and Data Processing

We present the first data release of the ALMA-IMF Large Program, which covers the 12m-array continuum calibration and imaging. The ALMA-IMF Large Program is a survey of fifteen dense molecular cloud regions spanning a range of evolutionary stages that aims to measure the core mass function (CMF). We describe the data acquisition and calibration done by the Atacama Large Millimeter/submillimeter Array (ALMA) observatory and the subsequent calibration and imaging we performed. The image products are combinations of multiple 12m array configurations created from a selection of the observed bandwidth using multi-term, multi-frequency synthesis imaging and deconvolution. The data products are self-calibrated and exhibit substantial noise improvements over the images produced from the delivered data. We compare different choices of continuum selection, calibration parameters, and image weighting parameters, demonstrating the utility and necessity of our additional processing work. Two variants of continuum selection are used and will be distributed: the "best-sensitivity" data, which include the full bandwidth, including bright emission lines that contaminate the continuum, and "cleanest", which select portions of the spectrum that are unaffected by line emission. We present a preliminary analysis of the spectral indices of the continuum data, showing that the ALMA products are able to clearly distinguish free-free emission from dust emission, and that in some cases we are able to identify optically thick emission sources. The data products are made public with this release.

astro-ph.GA↗

arXiv2023

ALMA-IMF VI -- Investigating the origin of stellar masses: Core mass function evolution in the W43-MM2&MM3 mini-starburst

Among the most central open questions regarding the initial mass function (IMF) of stars is the impact of environment on the shape of the core mass function (CMF) and thus potentially on the IMF. The ALMA-IMF Large Program aims to investigate the variations in the core distributions with cloud characteristics, as diagnostic observables of the formation process and evolution of clouds. The present study focuses on the W43-MM2&MM3 mini-starburst, whose CMF has recently been found to be top-heavy with respect to the Salpeter slope. W43-MM2&MM3 harbors a rich cluster that contains a statistically significant number of cores, which was previously characterized in Paper III. We applied a multi-scale decomposition technique to the ALMA 1.3 mm and 3 mm continuum images to define six subregions. For each subregion we characterized the high column density probability distribution function, n-PDF, and the shape of the cloud gas using the 1.3 mm image. Using the core catalog, we investigate correlations between the CMF and cloud and core properties. We classify the subregions into different stages of evolution, from quiescent to burst to post-burst, based on the surface number density of cores, number of outflows, and UCHii presence. The high-mass end of the subregion CMFs varies from being close to the Salpeter slope (quiescent) to top-heavy (burst and post-burst). Moreover, the second tail of the n-PDF varies from steep, to flat like observed for the high mass star-forming clouds. We found that subregions with flat second n-PDF tails display top-heavy CMFs. The CMF may evolve from Salpeter to top-heavy throughout the star formation process from the quiescent to the burst phase. This scenario raises the question of if the CMF might revert again to Salpeter as the cloud approaches the end of its star formation stage, a hypothesis that remains to be tested.

astro-ph.GA↗

arXiv2023

IC 5146 dark Streamer: is a first reliable candidate of edge collapse, hub-filament systems, and intertwined sub-filaments?

The paper presents an analysis of multi-wavelength data of a nearby star-forming site IC 5146 dark Streamer (d $\sim$600 pc), which has been treated as a single and long filament, fl. Two hub-filament systems (HFSs) are known toward the eastern and the western ends of fl. Earlier published results favor the simultaneous evidence of HFSs and the end-dominated collapse (EDC) in fl. Herschel column density map (resolution $\sim$13$''$.5) reveals two intertwined sub-filaments (i.e., fl-A and fl-B) toward fl, displaying a nearly double helix-like structure. This picture is also supported by the C$^{18}$O(3-2) emission. The scenario "fray and fragment" may explain the origin of intertwined sub-filaments. In the direction of fl, two cloud components around 2 and 4 km s$^{-1}$ are depicted using the $^{13}$CO(1-0) and C$^{18}$O(1-0) emission, and are connected in velocity space. The HFSs are spatially found at the overlapping areas of these cloud components and can be explained by the cloud-cloud collision scenario. Non-thermal gas motion in fl with larger Mach number is found. The magnetic field position angle measured from the filament's long axis shows a linear trend along the filament. This signature is confirmed in the other nearby EDC filaments, presenting a more quantitative confirmation of the EDC scenario. Based on our observational outcomes, we witness multiple processes operational in IC 5146 Streamer. Overall, the Streamer can be recognized as the first reliable candidate of edge collapse, HFSs, and intertwined sub-filaments together.

astro-ph.GA↗

arXiv2022

ALMA-IMF III -- Investigating the origin of stellar masses: Top-heavy core mass function in the W43-MM2&MM3 mini-starburst

The ALMA-IMF Large Program observed the W43-MM2-MM3 ridge, whose 1.3mm and 3mm ALMA 12m array continuum images reach a 2500au spatial resolution. We used both the best-sensitivity and the line-free ALMA-IMF images, reduced the noise with the multi-resolution segmentation technique MnGSeg, and derived the most complete and most robust core catalog possible. Using two different extraction software packages, getsf and GExt2D, we identified 200 compact sources, whose 100 common sources have on average fluxes consistent to within 30%. We filtered sources with non-negligible free-free contamination and corrected fluxes from line contamination, resulting in a W43-MM2-MM3 catalog of 205 getsf cores. With a median deconvolved FWHM size of 3400au, core masses range from 0.1Msun to 70Msun and the getsf catalog is 90% complete down to 0.8Msun. The high-mass end of the core mass function (CMF) of W43-MM2-MM3 is top-heavy compared to the canonical IMF. Fitting the cumulative CMF with a single power law of the form N(>logM)\propto M^a, we measured a=-0.95\pm0.04, compared to the canonical a=-1.35 Salpeter IMF slope. The slope of the CMF is robust with respect to map processing, extraction software package, and reasonable variations in the assumptions taken to estimate core masses. We explore several assumptions on how cores transfer their mass to stars and sub-fragment to predict the IMF resulting from the W43-MM2-MM3 CMF. In stark contrast to the commonly accepted paradigm, our result argues against the universality of the CMF shape. More robust functions of the star-formation efficiency and core sub-fragmentation are required to better predict the resulting IMF, here suggested to remain top-heavy at the end of the star-formation phase. If confirmed, the IMFs emerging from starburst events could inherit their top-heavy shape from their parental CMFs, challenging the IMF universality.

astro-ph.GA↗

arXiv2022

Filament coalescence and hub structure in MonR2: Implications to massive star and cluster formation

Here we study the MonR2 star forming region, which has a rich network of filaments joining in a star cluster forming hub, aiming at understanding the hub structure and to examine the mass fraction residing in the hub and in the filaments, which is a key factor that influences massive star formation. We conducted a multi-scale, multi-component analysis of the Herschel column density maps (resolution of 18.2" or $\sim$0.07 pc at 830 pc) of the region using a newly developed algorithm "getsf" to identify the structural components, namely, extended cloud, filaments, and sources. We find that cascades of lower column density filaments coalesce to form higher density filaments eventually merging inside the hub (0.8 pc radius). As opposed to the previous view of the hub as a massive clump with $\sim$1 pc radius, we find it to be a network of short high-density filaments. The total mass reservoir in the MonR2 HFS (5 pc $\times$ 5 pc) is split between filaments (54%), extended cloud (37%) and sources (9%). The M/L of filaments increase from $\sim$ 10 Msun/pc at 1.5pc from the hub to $\sim$ 100 Msun/pc at its centre, while the number of filaments per annulus of 0.2pc width decreases from 20 to 2 in the same range. The observed radial column density structure of the HFS (filament component only) displays a power-law dependence of $N_{\mathrm{H}_2} \propto r^{-2.17}$ up to a radius of $\sim$2.5 pc from the central hub, resembling a global collapse of the HFS. We present a scenario where the HFS can be supported by magnetic fields which interact, merge and reorganize themselves as the filaments coalesce. In the new view of the hub as a network of high-density filaments, we suggest that only the stars located in the network can benefit from the longitudinal flows of gas to become massive, which may explain the reason for the formation of many low-mass stars in cluster centres.

astro-ph.GA↗

arXiv2021

ALMA-IMF I -- Investigating the origin of stellar masses: Introduction to the Large Program and first results

The ALMA-IMF Large Program imaged a total noncontiguous area of 53pc2, covering 15 extreme, nearby protoclusters of the Milky Way. They were selected to span relevant early protocluster evolutionary stages. Our 1.3mm and 3mm observations provide continuum images that are homogeneously sensitive to point-like cores with masses of 0.2 and 0.6Msun, respectively, with a matched spatial resolution of 2000au. We also detect lines that probe the protocluster structure, kinematics, chemistry, and feedback over scales from clouds to filaments to cores. We classify ALMA-IMF protoclusters as Young, Intermediate, or Evolved based on the amount of dense gas in the cloud that has potentially been impacted by HII regions. The ALMA-IMF catalog contains 700 cores that span a mass range of 0.15-250Msun at a typical size of 2100au. We show that this core sample has no significant distance bias and can be used to build core mass functions at similar physical scales. Significant gas motions, which we highlight here in the G353.41 region, are traced down to core scales and can be used to look for inflowing gas streamers and to quantify the impact of the possible associated core mass growth on the shape of the CMF with time. Our first analysis does not reveal any significant evolution of the matter concentration from clouds to cores or from the youngest to more evolved protoclusters, indicating that cloud dynamical evolution and stellar feedback have for the moment only had a slight effect on the structure of high-density gas in our sample. Furthermore, the first-look analysis of the line richness toward bright cores indicates that the survey encompasses several tens of hot cores, of which we highlight the most massive in the G351.77 cloud. Their homogeneous characterization can be used to constrain the emerging molecular complexity in protostars of high to intermediate masses.

astro-ph.GA↗

arXiv2021

Multicomponent, multiwavelength benchmarks for source- and filament-extraction methods

Modern multiwavelength observations of star-forming regions that reveal highly structured molecular clouds require adequate extraction methods that provide both detection of the structures and their accurate measurements. The omnipresence of filamentary structures and their physical connection to prestellar cores demand methods that are able to disentangle and extract both sources and filaments. It is fundamentally important to test all extraction methods to compare their detection and measurement qualities and fully understand their capabilities before their scientific applications. A recent publication described getsf, the new method for source and filament extraction that employs the separation of the structural components, a successor to getsources, getfilaments, and getimages (collectively referred to as getold). This new paper describes a detailed benchmarking of both getsf and getold using two multicomponent, multiwavelength benchmarks resembling the Herschel observations of the nearby star-forming regions. Each benchmark consists of simulated images at six Herschel wavelengths and one additional surface density image with a 13 arcsec resolution. The structural components of the benchmarks include a background cloud, a dense filament, hundreds of starless and protostellar cores, and instrumental noise. Five variants of benchmark images of different complexity are used to perform the source and filament extractions with getsf and getold. A formalism for evaluating source detection and measurement qualities is presented, allowing quantitative comparisons of extraction methods in terms of their completeness, reliability, and goodness, as well as the detection and measurement accuracies and the overall quality. A detailed analysis shows that getsf has better qualities than getold and that the best choice for source detection is the high-resolution surface density.

astro-ph.IM↗

arXiv2021

Multiscale, multiwavelength extraction of sources and filaments using separation of the structural components: getsf

High-quality astronomical images delivered by modern ground-based and space observatories demand adequate, reliable software for their analysis and accurate extraction of sources, filaments, and other structures, containing massive amounts of detailed information about the complex physical processes in space. The multiwavelength observations with highly variable angular resolutions across wavebands require extraction tools that preserve and use the invaluable high-resolution information. This paper presents getsf, a new method for extracting sources and filaments in astronomical images using separation of their structural components, designed to handle multiwavelength sets of images and very complex filamentary backgrounds. The method spatially decomposes the original images and separates the structural components of sources and filaments from each other and from their backgrounds, flattening their resulting images. It spatially decomposes the flattened components, combines them over wavelengths, detects the positions of sources and skeletons of filaments, and measures the detected sources and filaments. This paper presents a realistic multiwavelength set of simulated benchmark images that can serve as the standard benchmark problem to evaluate qualities of source- and filament-extraction methods. This paper describes hires, an improved algorithm for the derivation of high-resolution surface densities from the multiwavelength far-infrared Herschel images. The algorithm allows creating the surface densities with angular resolutions that reach 5.6 arcsec, when the 70 micron image is used. The codes getsf and hires are illustrated by their applications to a variety of images, from the X-ray domain to the millimeter wavelengths.

astro-ph.IM↗

arXiv2020

The census of dense cores in the Serpens region from the Herschel Gould Belt Survey

The Herschel Gould Belt survey mapped the nearby (d < 500 pc) star-forming regions to understand better how the prestellar phase influences the star formation process. Here we report a complete census of dense cores in a 15 deg2 area of the Serpens star-forming region located between d=420 pc and 484 pc. The PACS and SPIRE cameras imaged this cloud from 70micron to 500micron. With the multi-wavelength source extraction algorithm getsources, we extract 833 sources, of which 709 are starless cores and 124 are candidate proto-stellar cores. We obtain temperatures and masses for all the sample, classifying the starless cores in 604 prestellar cores and 105 unbound cores. Our census of sources is 80% complete for masses larger than 0.8 Msun overall. We produce the core mass function (CMF) and compare it with the initial mass function (IMF). The prestellar CMF is consistent with log-normal trend up to 2 Msun, after which it follows a power-law with slope of -2.05+/-0.34. The tail of its CMF is steeper but still compatible with the IMF for the region we studied in this work. We also extract the filaments network of the Serpens region, finding that 81% of prestellar cores lie on filamentary structures. The spatial association between cores and filamentary structure supports the paradigm, suggested by otherHerschelobservations, that prestellar cores mostly form on filaments. Serpens is confirmed to be a young, low-mass and active star-forming region.

astro-ph.GA↗

arXiv2020

Mass segregation and sequential star formation in NGC 2264 revealed by Herschel

The mass segregation of stellar clusters could be primordial rather than dynamical. Despite the abundance of studies of mass segregation for stellar clusters, those for stellar progenitors are still scarce, so the question on the origin and evolution of mass segregation is still open. Our goal is to characterize the structure of the NGC 2264 molecular cloud and compare the populations of clumps and young stellar objects (YSOs) in this region whose rich YSO population has shown evidence of sequential star formation. We separated the Herschel column density map of NGC 2264 in three subregions and compared their cloud power spectra using a multiscale segmentation technique. We identified in the whole NGC 2264 cloud a population of 256 clumps with typical sizes of ~0.1 pc and masses ranging from 0.08 Msun to 53 Msun. Although clumps have been detected all over the cloud, the central subregion of NGC 2264 concentrates most of the massive, bound clumps. The local surface density and the mass segregation ratio indeed indicate a strong degree of mass segregation for the 15 most massive clumps, with a median $Σ_6$ three time that of the whole clumps population and $Λ_{MSR}$ about 8. We showed that this cluster of massive clumps is forming within a high-density cloud ridge, itself formed and probably still fed by the high concentration of gas observed on larger scales in the central subregion. The time sequence obtained from the combined study of the clump and YSO populations in NGC 2264 suggests that the star formation started in the northern subregion, that it is now actively developing at the center and will soon start in the southern subregion. Taken together, the cloud structure and the clump and YSO populations in NGC 2264 argue for a dynamical scenario of star formation.

astro-ph.GA↗

arXiv2020

The role of Galactic HII regions in the formation of filaments. High-resolution submilimeter imaging of RCW 120 with ArTéMiS

Massive stars and their associated ionized (HII) regions could play a key role in the formation and evolution of filaments that host star formation. However, the properties of filaments that interact with H regions are still poorly known. To investigate the impact of HII regions on the formation of filaments, we imaged the Galactic HII region RCW 120 and its surroundings where active star formation takes place and where the role of ionization feedback on the star formation process has already been studied. We used the ArTéMiS camera on the APEX telescope and combined the ArTéMiS data at 350 and 450 microns with Herschel-SPIRE/HOBYS. We studied the dense gas distribution around RCW 120 with a resolution of 8 arcsec (0.05 pc at a distance of 1.34 kpc). Our study allows us to trace the median radial intensity profile of the dense shell of RCW 120. This profile is asymmetric, indicating a clear compression from the HII region on the inner part of the shell. The profile is observed to be similarly asymmetric on both lateral sides of the shell, indicating a homogeneous compression over the surface. On the contrary, the profile analysis of a radial filament associated with the shell, but located outside of it, reveals a symmetric profile, suggesting that the compression from the ionized region is limited to the dense shell. The mean intensity profile of the internal part of the shell is well fitted by a Plummer like profile with a deconvolved Gaussian FWHM of 0.09 pc, as observed for filaments in low-mass star-forming regions. This study suggests that compression exerted by HII regions may play a key role in the formation of filaments and may further act on their hosted star formation. ArTéMiS data also suggest that RCW 120 might be a 3D ring, rather than a spherical structure

astro-ph.GA↗

arXiv2020

Properties of the dense core population in Orion B as seen by the Herschel Gould Belt survey

We present a detailed study of the Orion B clouds (d~400 pc), imaged with the PACS/SPIRE cameras at 70-500 $μ$m by the Herschel Gould Belt survey (HGBS). We release new high-res. maps of column density and dust temperature. In the filamentary sub-regions NGC2023/2024, NGC2068/2071, and L1622, 1768 starless dense cores were identified, ~28-45% of which are self-gravitating prestellar cores. A total of 76 protostellar dense cores were also found. The typical lifetime of the prestellar cores was found to be $t_{\rm pre}=1.7_{-0.6}^{+0.8}$ Myr. The prestellar core mass function (CMF) peaks at ~0.5 $M_\odot$ and is consistent with a power law with log slope -1.27$\pm$0.24 at the high-mass end, compared to the Salpeter slope of -1.35. In this region, we confirm the existence of a transition in prestellar core formation efficiency (CFE) around a fiducial value A_V_bg~7 mag in background visual extinction, similar to the trend observed with Herschel in other clouds. This is not a sharp threshold, but a smooth transition between a regime with very low prestellar CFE at A_V_bg<5 and a regime with higher, roughly constant CFE at A_V_bg$\gtrsim$10. The total mass in the form of prestellar cores represents only ~20% of the dense molecular cloud gas at A_V_bg$\gtrsim$7 mag. About 60-80% of the prestellar cores are closely associated with filaments, and this fraction increases up to >90% when a more complete sample of filamentary structures is considered. Interestingly, the median separation between nearest core neighbors corresponds to the typical inner filament width of ~0.1 pc commonly observed in nearby molecular clouds. Analysis of the CMF observed as a function of background cloud column density shows that the most massive prestellar cores are spatially segregated in the highest column density areas, and suggests that both higher- and lower-mass prestellar cores may form in denser filaments.

astro-ph.SR↗