arXiv subjects

A. Mura

Publications and source records attributed to A. Mura.

25 records · Page 2Linked to original sources

arXiv2014

Coherent optical frequency transfer at 5e-19 over a doubled 642 km fiber link

To significantly improve the frequency references used in radio-astronomy and precision measurements in atomic physics, we provide frequency dissemination through a 642 km coherent optical fiber link, that will be also part of a forthcoming European network of optical links. We obtained a resolution of 3e-19 at 1000 s on the frequency transfer, and an accuracy of 5e-19. The ultimate link performance has been evaluated by doubling the link to 1284 km, demonstrating a new characterization technique based on the double round-trip on a single fiber. The arming of a second fiber is avoided: this is beneficial to long hauls realizations in view of a continental fiber network for frequency and time metrology. The data analysis is based on the Allan deviation; its expression is theoretically derived for the observed noise power spectrum, which is seldom found in the literature.

physics.optics↗

arXiv2014

Beyond the fundamental noise limit in coherent optical fiber links

It is well known that temperature variations and acoustic noise affect ultrastable frequency dissemination along optical fiber. Active stabilization techniques are in general adopted to compensate for the fiber-induced phase noise. However, despite this compensation, the ultimate link performances remain limited by the so called delay-unsuppressed fiber noise that is related to the propagation delay of the light in the fiber. In this paper, we demonstrate a data post-processing approach which enables us to overcome this limit. We implement a subtraction algorithm between the optical signal delivered at the remote link end and the round-trip signal. In this way, a 6 dB improvement beyond the fundamental limit imposed by delay-unsuppressed noise is obtained. This result enhances the resolution of possible comparisons between remote optical clocks by a factor of 2. We confirm the theoretical prediction with experimental data obtained on a 47 km metropolitan fiber link, and propose how to extend this method for frequency dissemination purposes as well.

physics.optics↗

arXiv2012

Dynamical Evolution of Sodium Anysotropies in the Exosphere of Mercury

The exosphere, the tenuous collisionless cloud of gas surrounding Mercury is still a poorly known object because it is the result of many various interactions between the surface, the interplanetary medium (Solar wind, photons and meteoroids), the planetary and the interplanetary magnetic fields. Many ground-based observations have allowed the detection of intense and variable sodium emissions at global and local spatial scales, the latter being mostly concentrated in the polarmid latitude regions. These regions are indeed the preferred location of solar wind precipitation on the surface of the planet. In the present paper, by using high resolution Na observations obtained at the Canary Islands with the THEMIS solar telescope, we analyze the variability of the sodium exosphere on time-scale of 1 hour and investigate the possible mechanisms that could explain the exospheric sodium emission distribution and its dynamics. Our interpretation relates the observed sodium asymmetries to the combined effects of plasma and photons impacts onto the Mercury's surface and of sodium diffusion through the upper layer of the surface. The comparison between data and simulations seems to evidence that, similarly to what occurs at the Earth, both the magnetic reconnection regimes of pulsed or quasi-steady reconnection could occur on Mercury, and be responsible for the observed Na short term variations. In addition to this, a progressive broadening of the peak regions together with an increase of the equatorial region seem to corroborate the idea of the role of photon stimulated desorption, in association with ion sputtering and with global sodium migration around Mercury as the cause of the observed evolution of the Na exosphere.

astro-ph.EP↗

arXiv2010

Constraints on the exosphere of CoRoT-7b

CONTEXT: The small radius and high density of CoRoT-7b implies that this transiting planet belongs to a differen t species than all transiting planets previously found. Current models suggest that this is the first transiting rocky planet found outside the solar system. Given that the planet orbits a solar-like star at a distance of on ly 4.5 R*, it is expected that material released from its surface may then form an exosphere. AIMS: We constrai n the properties of the exosphere by observing the planet in- and out-of-transit. Detecting of the exosphere of CoRoT-7b would for the first time allow to study the material originating in the surface of a rocky extrasolar planet. We scan the entire optical spectrum for any lines originating from the planet, focusing particularly on spectral lines such as those detected in Mercury, and Io in our solar system. METHODS: Since lines originating in the exosphere are expected to be narrow, we observed CoRoT-7b at high resolution with UVES on the VLT. By subtracting the two spectra from each other, we search for emission and absorption lines originating in the exosph ere of CoRoT-7b. RESULTS: In the first step, we focus on Ca I, Ca II, Na, because these lines have been detected in Mercury. Since the signal-to-noise ratio (S/N) of the spectra is as high as 300, we derive firm upper limits for the flux-range between 1.6E-18 and 3.2E-18 Wm**-2. For CaO, we find an upper limit of E-17 Wm**-2. We also search for emission lines originating in the plasma torus fed by volcanic activity and derive upper limits for these lines. In the whole spectrum we finally try to identify other lines originating in the planet.

astro-ph.EP↗

arXiv2010

Neutral particle release from Europa's surface

In this paper, we look at space weathering processes on the icy surface of Jupiter's moon Europa. The heavy energetic ions of the Jovian plasma (H+, O+, S+, C+) can erode the surface of Europa via ion sputtering (IS), ejecting up to 1000 H2O molecules per ion. UV Photons impinging the Europa's surface can also result in neutral atom release via photon-stimulated desorption (PSD) and chemical change (photolysis). In this work, we study the efficiency of the IS and PSD processes for ejecting water molecules, simulating the resulting neutral H2O density. We also estimate the contribution to the total neutral atom release by the Ion Backscattering (IBS) process. Moreover, we estimate the possibility of detecting the sputtered high energy atoms, in order to distinguish the action of the IS process from other surface release mechanisms. Our main results are: 1) The most significant sputtered-particle flux and the largest contribution to the neutral H2O-density come from the incident S+ ions; 2) The H2O density produced via PSD is lower than that due to sputtering by ~1.5 orders of magnitude; 3) In the energy range below 1 keV, the IBS can be considered negligible for the production of neutrals, whereas in the higher energy range it becomes the dominant neutral emission mechanism; 4) the total sputtering rate for Europa is 2.0\cdot 1027 H2O s-1; 5) the fraction of escaping H2O via IS is 22% of the total sputtered population, while the escape fraction for H2O produced by PSD is 30% of the total PSD population. Since the PSD exosphere is lower than the IS one, the major agent for Europa's surface erosion is IS on both the non-illuminated and illuminated side. Lastly, the exospheric neutral density, estimated from the Galileo electron density measurements appears to be higher than that calculated for H2O alone; this favours the scenario of the presence of O2 produced by radiolysis and photolysis.

astro-ph.EP↗

arXiv2008

Space Weathering on Near-Earth Objects investigated by neutral-particle detection

The ion-sputtering (IS) process is active in many planetary environments in the Solar System where plasma precipitates directly on the surface (for instance, Mercury, Moon, Europa). In particular, solar-wind sputtering is one of the most important agents for the surface erosion of a Near-Earth Object (NEO), acting together with other surface release processes, such as Photon Stimulated Desorption (PSD), Thermal Desorption (TD) and Micrometeoroid Impact Vaporization (MIV). The energy distribution of the IS-released neutrals peaks at a few eVs and extends up to hundreds of eVs. Since all other release processes produce particles of lower energies, the presence of neutral atoms in the energy range above 10 eV and below a few keVs (Sputtered High-Energy Atoms - SHEA) identifies the IS process. SHEA easily escape from the NEO, due to NEO's extremely weak gravity. Detection and analysis of SHEA will give important information on surface-loss processes as well as on surface elemental composition. The investigation of the active release processes, as a function of the external conditions and the NEO surface properties, is crucial for obtaining a clear view of the body's present loss rate as well as for getting clues on its evolution, which depends significantly on space weather. In this work, an attempt to analyze the processes that take place on the surface of these small airless bodies, as a result of their exposure to the space environment, has been realized. For this reason a new space weathering model (Space Weathering on NEO - SPAWN), is presented. Moreover, an instrument concept of a neutral-particle analyzer specifically designed for the measurement of neutral density and the detection of SHEA from a NEO is proposed

physics.space-ph↗

arXiv2008

Low energy high angular resolution neutral atom detection by means of micro-shuttering techniques: the BepiColombo SERENA/ELENA sensor

The neutral sensor ELENA (Emitted Low-Energy Neutral Atoms) for the ESA cornerstone BepiColombo mission to Mercury (in the SERENA instrument package) is a new kind of low energetic neutral atoms instrument, mostly devoted to sputtering emission from planetary surfaces, from E ~20 eV up to E~5 keV, within 1-D (2x76 deg). ELENA is a Time-of-Flight (TOF) system, based on oscillating shutter (operated at frequencies up to a 100 kHz) and mechanical gratings: the incoming neutral particles directly impinge upon the entrance with a definite timing (START) and arrive to a STOP detector after a flight path. After a brief dissertation on the achievable scientific objectives, this paper describes the instrument, with the new design techniques approached for the neutral particles identification and the nano-techniques used for designing and manufacturing the nano-structure shuttering core of the ELENA sensor. The expected count-rates, based on the Hermean environment features, are shortly presented and discussed. Such design technologies could be fruitfully exported to different applications for planetary exploration.

physics.ins-det↗