arXiv subjects

A. N. Belikov

Publications and source records attributed to A. N. Belikov.

11 recordsLinked to original sources

arXiv2025

Euclid Quick Data Release (Q1): VIS processing and data products

This paper describes the VIS Processing Function (VIS PF) of the Euclid ground segment pipeline, which processes and calibrates raw data from the VIS camera. We present the algorithms used in each processing element, along with a description of the on-orbit performance of VIS PF, based on Performance Verification (PV) and Q1 data. We demonstrate that the principal performance metrics (image quality, astrometric accuracy, photometric calibration) are within pre-launch specifications. The image-to-image photometric scatter is less than $0.8\%$, and absolute astrometric accuracy compared to Gaia is $5$ mas Image quality is stable over all Q1 images with a full width at half maximum (FWHM) of $0.\!^{\prime\prime}16$. The stacked images (combining four nominal and two short exposures) reach $I_\mathrm{E} = 25.6$ ($10σ$, measured as the variance of $1.\!^{\prime\prime}3$ diameter apertures). We also describe quality control metrics provided with each image, and an appendix provides a detailed description of the provided data products. The excellent quality of these images demonstrates the immense potential of Euclid VIS data for weak lensing. VIS data, covering most of the extragalactic sky, will provide a lasting high-resolution atlas of the Universe.

astro-ph.IM↗

arXiv2025

Euclid Quick Data Release (Q1): From images to multiwavelength catalogues: the Euclid MERge Processing Function

The Euclid satellite is an ESA mission that was launched in July 2023. \Euclid is working in its regular observing mode with the target of observing an area of $14\,000~\text{deg}^2$ with two instruments, the Visible Camera (VIS) and the Near IR Spectrometer and Photometer (NISP) down to $I_{\rm E} = 24.5~\text{mag}$ ($10\, σ$) in the Euclid Wide Survey. Ground-based imaging data in the \textit{ugriz} bands complement the \Euclid data to enable photo-$z$ determination and VIS PSF modeling for week lensing analysis. Euclid investigates the distance-redshift relation and the evolution of cosmic structures by measuring shapes and redshifts of galaxies and clusters of galaxies out to $z\sim 2$. Generating the multi-wavelength catalogues from \Euclid and ground-based data is an essential part of the \Euclid data processing system. In the framework of the \Euclid Science Ground Segment (SGS), the aim of the MER Processing Function (PF) pipeline is to detect objects in the \Euclid imaging data, measure their properties, and MERge them into a single multi-wavelength catalogue. The MER PF pipeline performs source detection on both visible (VIS) and near-infrared (NIR) images and offers four different photometric measurements: Kron total flux, aperture photometry on PSF-matched images, template fitting photometry, and Sérsic fitting photometry. Furthermore, the MER PF pipeline measures a set of ancillary quantities, spanning from morphology to quality flags, to better characterise all detected sources. In this paper, we show how the MER PF pipeline is designed, detailing its main steps, and we show that the pipeline products meet the tight requirements that Euclid aims to achieve on photometric accuracy. We also present the other measurements (e.g. morphology) that are included in the OU-MER output catalogues and we list all output products coming out of the MER PF pipeline.

astro-ph.IM↗

arXiv2025

Euclid Quick Data Release (Q1) -- Data release overview

The first Euclid Quick Data Release, Q1, comprises 63.1 sq deg of the Euclid Deep Fields (EDFs) to nominal wide-survey depth. It encompasses visible and near-infrared space-based imaging and spectroscopic data, ground-based photometry in the u, g, r, i and z bands, as well as corresponding masks. Overall, Q1 contains about 30 million objects in three areas near the ecliptic poles around the EDF-North and EDF-South, as well as the EDF-Fornax field in the constellation of the same name. The purpose of this data release -- and its associated technical papers -- is twofold. First, it is meant to inform the community of the enormous potential of the Euclid survey data, to describe what is contained in these data, and to help prepare expectations for the forthcoming first major data release DR1. Second, it enables a wide range of initial scientific projects with wide-survey Euclid data, ranging from the early Universe to the Solar System. The Q1 data were processed with early versions of the processing pipelines, which already demonstrate good performance, with numerous improvements in implementation compared to pre-launch development. In this paper, we describe the sky areas released in Q1, the observations, a top-level view of the data processing of Euclid and associated external data, the Q1 photometric masks, and how to access the data. We also give an overview of initial scientific results obtained using the Q1 data set by Euclid Consortium scientists, and conclude with important caveats when using the data. As a complementary product, Q1 also contains observations of a star-forming area in Lynd's Dark Nebula 1641 in the Orion~A Cloud, observed for technical purposes during Euclid's performance-verification phase. This is a unique target, of a type not commonly found in Euclid's nominal sky survey.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1). NIR processing and data products

This paper describes the near-infrared processing function (NIR PF) that processes near-infrared images from the Near-Infrared Spectrometer and Photometer (NISP) instrument onboard the Euclid satellite. NIR PF consists of three main components: (i) a common pre-processing stage for both photometric (NIR) and spectroscopic (SIR) data to remove instrumental effects; (ii) astrometric and photometric calibration of NIR data, along with catalogue extraction; and (iii) resampling and stacking. The necessary calibration products are generated using dedicated pipelines that process observations from both the early performance verification (PV) phase in 2023 and the nominal survey operations. After outlining the pipeline's structure and algorithms, we demonstrate its application to Euclid Q1 images. For Q1, we achieve an astrometric accuracy of 9-15 mas, a relative photometric accuracy of 5 mmag, and an absolute flux calibration limited by the 1% uncertainty of the Hubble Space Telescope (HST) CALSPEC database. We characterise the point-spread function (PSF) that we find very stable across the focal plane, and we discuss current limitations of NIR PF that will be improved upon for future data releases.

astro-ph.CO↗

arXiv2025

Euclid Quick Data Release (Q1). Photometric redshifts and physical properties of galaxies through the PHZ processing function

The ESA Euclid mission will measure the photometric redshifts of billions of galaxies in order to provide an accurate 3D view of the Universe at optical and near-infrared wavelengths. Photometric redshifts are determined by the PHZ processing function on the basis of the multi-wavelength photometry of Euclid and ground-based observations. In this paper, we describe the PHZ processing used for the Euclid Quick Data Release, the output products, and their validation. The PHZ pipeline is responsible for the following main tasks: source classification into star, galaxy, and QSO classes based on photometric colours; determination of photometric redshifts and of physical properties of galaxies. The classification is able to provide a star sample with a high level of purity, a highly complete galaxy sample, and reliable probabilities of belonging to those classes. The identification of QSOs is more problematic: photometric information seems to be insufficient to accurately separate QSOs from galaxies. The performance of the pipeline in the determination of photometric redshifts has been tested using the COSMOS2020 catalogue and a large sample of spectroscopic redshifts. The results are in line with expectations: the precision of the estimates are compatible with Euclid requirements, while, as expected, a bias correction is needed to achieve the accuracy level required for the cosmological probes. Finally, the pipeline provides reliable estimates of the physical properties of galaxies, in good agreement with findings from the COSMOS2020 catalogue, except for an unrealistically large fraction of very young galaxies with very high specific star-formation rates. The application of appropriate priors is, however, sufficient to obtain reliable physical properties for those problematic objects. We present several areas for improvement for future Euclid data releases.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1): From spectrograms to spectra: the SIR spectroscopic Processing Function

The Euclid space mission aims to investigate the nature of dark energy and dark matter by mapping the large-scale structure of the Universe. A key component of Euclid's observational strategy is slitless spectroscopy, conducted using the Near Infrared Spectrometer and Photometer (NISP). This technique enables the acquisition of large-scale spectroscopic data without the need for targeted apertures, allowing precise redshift measurements for millions of galaxies. These data are essential for Euclid's core science objectives, including the study of cosmic acceleration and the evolution of galaxy clustering, as well as enabling many non-cosmological investigations. This study presents the SIR processing function (PF), which is responsible for processing slitless spectroscopic data. The objective is to generate science-grade fully-calibrated one-dimensional spectra, ensuring high-quality spectroscopic data. The processing function relies on a source catalogue generated from photometric data, effectively corrects detector effects, subtracts cross-contaminations, minimizes self-contamination, calibrates wavelength and flux, and produces reliable spectra for later scientific use. The first Quick Data Release (Q1) of Euclid's spectroscopic data provides approximately three million validated spectra for sources observed in the red-grism mode from a selected portion of the Euclid Wide Survey. We find that wavelength accuracy and measured resolving power are within requirements, thanks to the excellent optical quality of the instrument. The SIR PF represents a significant step in processing slitless spectroscopic data for the Euclid mission. As the survey progresses, continued refinements and additional features will enhance its capabilities, supporting high-precision cosmological and astrophysical measurements.

astro-ph.IM↗

arXiv2024

Euclid. I. Overview of the Euclid mission

The current standard model of cosmology successfully describes a variety of measurements, but the nature of its main ingredients, dark matter and dark energy, remains unknown. Euclid is a medium-class mission in the Cosmic Vision 2015-2025 programme of the European Space Agency (ESA) that will provide high-resolution optical imaging, as well as near-infrared imaging and spectroscopy, over about 14,000 deg^2 of extragalactic sky. In addition to accurate weak lensing and clustering measurements that probe structure formation over half of the age of the Universe, its primary probes for cosmology, these exquisite data will enable a wide range of science. This paper provides a high-level overview of the mission, summarising the survey characteristics, the various data-processing steps, and data products. We also highlight the main science objectives and expected performance.

astro-ph.CO↗

arXiv2012

The Astro-WISE datacentric information system

In this paper we present the various concepts behind the Astro-WISE Information System. The concepts form a blueprint for general scientific information systems (WISE) which can satisfy a wide and challenging range of requirements for the data dissemination, storage and processing for various fields in science. We review the main features of the information system and its practical implementation.

astro-ph.IM↗

arXiv2011

Information Systems Playground - The Target Infrastructure, Scaling Astro-WISE into the Petabyte range

The Target infrastructure has been specially built as a storage and compute infrastructure for the information systems derived from Astro-WISE. This infrastructure will be used by several applications that collaborate in the area of information systems within the Target project. It currently consists of 10 PB of storage and thousands of computational cores. The infrastructure has been constructed based on the requirements of the applications. The storage is controlled by the Global Parallel File System of IBM. This file system takes care of the required flexibility by combining storage hardware with different characteristics into a single file system. It is also very scalable, which allows the system to be extended into the future, while replacing old hardware with new technology.

astro-ph.IM↗

arXiv2008

A general method of estimating stellar astrophysical parameters from photometry

Applying photometric catalogs to the study of the population of the Galaxy is obscured by the impossibility to map directly photometric colors into astrophysical parameters. Most of all-sky catalogs like ASCC or 2MASS are based upon broad-band photometric systems, and the use of broad photometric bands complicates the determination of the astrophysical parameters for individual stars. This paper presents an algorithm for determining stellar astrophysical parameters (effective temperature, gravity and metallicity) from broad-band photometry even in the presence of interstellar reddening. This method suits the combination of narrow bands as well. We applied the method of interval-cluster analysis to finding stellar astrophysical parameters based on the newest Kurucz models calibrated with the use of a compiled catalog of stellar parameters. Our new method of determining astrophysical parameters allows all possible solutions to be located in the effective temperature-gravity-metallicity space for the star and selection of the most probable solution.

astro-ph↗

arXiv2004

On the determination of age and mass functions of stars in young open star clusters from the analysis of their luminosity functions

Based on the CCD observations of remote young open clusters NGC 2383, NGC 2384, NGC 4103, NGC 4755, NGC 7510 and Hogg 15, we constructed their observed luminosity functions (LFs). The observed LFs are corrected for field star contamination determined with the help of galactic star count model. In the case of Hogg 15 and NGC 2383 we also considered the additional contamination from neighbouring clusters NGC 4609 and NGC 2384 respectively. These corrections provided the realistic pattern of cluster LF in the vicinity of the MS turn on point and at fainter magnitudes, revealed the so called H-feature arising due to transition of the Pre-MS phase to MS, which is dependent on the cluster age. The theoretical LFs were constructed representing a cluster population model with continuous star formation for a short time scale and a power law Initial Mass Function (IMF) and these were fitted to the observed LF. As a result we are able to determine for each cluster a set of parameters, describing cluster population (the age, duration of star formation, IMF slope and percentage of field star contamination). It was found that in spite of the non-monotonic behaviour of observed LFs, cluster IMFs can be described as the power law functions with slopes similar to Salpeter's value. The present MS turn on cluster ages are several times lower than those derived from the fitting of theoretical isochrones to the turn off region of the upper Main Sequences.

astro-ph↗