SearcharxivSearch

arXiv subjects

A. N. Norris

Publications and source records attributed to A. N. Norris.

16 recordsLinked to original sources

Wave propagation and homogenization in 2D and 3D lattices: a semi-analytical approach

Wave motion in two- and three-dimensional periodic lattices of beam members supporting longitudinal and flexural waves is considered. An analytic method for solving the Bloch wave spectrum is developed, characterized by a generalized eigenvalue equation obtained by enforcing the Floquet condition. The dynamic stiffness matrix is shown to be explicitly Hermitian and to admit positive eigenvalues. Lattices with hexagonal, rectangular, tetrahedral and cubic unit cells are analyzed. The semi-analytical method can be asymptotically expanded for low frequency yielding explicit forms for the Christoffel matrix describing wave motion in the quasistatic limit.

cond-mat.mtrl-sci

Comment on "Characterization of an acoustic spherical cloak", Inverse Problems 31(3):035001, 2015

The paper [1] considers a spherical cloak described by three radially varying acoustical quantities. For a given radial mass density in the cloak the question posed is whether the remaining two parameters, tangential density and compressibility, are uniquely determined. A method is proposed in [1] to solve this inverse question based upon the solution of a Riemann-Hilbert problem involving spectral properties of a one-dimensional inhomogeneous Schrödinger equation. However, no constructive examples of the solution procedure are given. This comment provides explicit solutions for any radial mass density that conforms with the requirements of transformation acoustics [2]. A valid form of the compatibility condition [1, eq. (22)] for $n=0$ is derived.

physics.class-ph

Converging bounds for the effective shear speed in 2D phononic crystals

Calculation of the effective quasistatic shear speed $c$ in 2D solid phononic crystals is analyzed. The plane-wave expansion (PWE) and the monodromy-matrix (MM) methods are considered. For each method, the stepwise sequence of upper and lower bounds is obtained which monotonically converges to the exact value of $c$. It is proved that the two-sided MM bounds of $c$ are tighter and their convergence to $c$ is uniformly faster than that of the PWE bounds. Examples of the PWE and MM bounds of effective speed versus concentration of high-contrast inclusions are demonstrated.

math-ph

On the quasistatic effective elastic moduli for elastic waves in three-dimensional phononic crystals

Effective elastic moduli for 3D solid-solid phononic crystals of arbitrary anisotropy and oblique lattice structure are formulated analytically using the plane-wave expansion (PWE) method and the recently proposed monodromy-matrix (MM) method. The latter approach employs Fourier series in two dimensions with direct numerical integration along the third direction. As a result, the MM method converges much quicker to the exact moduli in comparison with the PWE as the number of Fourier coefficients increases. The MM method yields a more explicit formula than previous results, enabling a closed-form upper bound on the effective Christoffel tensor. The MM approach significantly improves the efficiency and accuracy of evaluating effective wave speeds for high-contrast composites and for configurations of closely spaced inclusions, as demonstrated by three-dimensional examples.

math-ph

The matrix sign function for solving surface wave problems in homogeneous and laterally periodic elastic half-spaces

The matrix sign function is shown to provide a simple and direct method to derive some fundamental results in the theory of surface waves in anisotropic materials. It is used to establish a shortcut to the basic formulas of the Barnett-Lothe integral formalism and to obtain an explicit solution of the algebraic matrix Riccati equation for the surface impedance. The matrix sign function allows the Barnett-Lothe formalism to be readily generalized for the problem of finding the surface wave speed in a periodically inhomogeneous half-space with material properties that are independent of depth. No partial wave solutions need to be found; the surface wave dispersion equation is formulated instead in terms of blocks of the matrix sign function of i times the Stroh matrix.

math-ph

Green's function for symmetric loading of an elastic sphere with application to contact problems

A compact form for the static Green's function for symmetric loading of an elastic sphere is derived. The expression captures the singularity in closed form using standard functions and quickly convergent series. Applications to problems involving contact between elastic spheres are discussed. An exact solution for a point load on a sphere is presented and subsequently generalized for distributed loads. Examples for constant and Hertzian-type distributed loads are provided, where the latter is also compared to the Hertz contact theory for identical spheres. The results show that the form of the loading assumed in Hertz contact theory is valid for contact angles up to about 10 degrees. For larger angles, the actual displacement is smaller and the contact surface is no longer flat.

physics.class-ph

Hyperelastic cloaking theory: Transformation elasticity with pre-stressed solids

Transformation elasticity, by analogy with transformation acoustics and optics, converts material domains without altering wave properties, thereby enabling cloaking and related effects. By noting the similarity between transformation elasticity and the theory of incremental motion superimposed on finite pre-strain it is shown that the constitutive parameters of transformation elasticity correspond to the density and moduli of small-on-large theory. The formal equivalence indicates that transformation elasticity can be achieved by selecting a particular finite (hyperelastic) strain energy function, which for isotropic elasticity is semilinear strain energy. The associated elastic transformation is restricted by the requirement of statically equilibrated pre-stress. This constraint can be cast as $\tr {\mathbf F} =$ constant, where $\mathbf{F}$ is the deformation gradient, subject to symmetry constraints, and its consequences are explored both analytically and through numerical examples of cloaking of anti-plane and in-plane wave motion.

physics.class-ph

Spectral properties of a 2D scalar wave equation with 1D-periodic coefficients: application to SH elastic waves

The paper provides a rigorous analysis of the dispersion spectrum of SH (shear horizontal) elastic waves in periodically stratified solids. The problem consists of an ordinary differential wave equation with periodic coefficients, which involves two free parameters $ω$ (the frequency) and $k$ (the wavenumber in the direction orthogonal to the axis of periodicity). Solutions of this equation satisfy a quasi-periodic boundary condition which yields the Floquet parameter $K$. The resulting dispersion surface $ω(K,k)$ may be characterized through its cuts at constant values of $K, k$ and $ω$ that define the passband (real $K$) and stopband areas, the Floquet branches and the isofrequency curves, respectively. The paper combines complementary approaches based on eigenvalue problems and on the monodromy matrix $\mathbf{M}$. The pivotal object is the Lyapunov function $Δ(ω^{2},k^{2}) \equiv 1/2\mathrm{trace}\mathbf{M}=\cos K$ which is generalized as a function of two variables. Its analytical properties, asymptotics and bounds are examined and an explicit form of its derivatives obtained. Attention is given to the special case of a zero-width stopband. These ingredients are used to analyze the cuts of the surface $ω(K,k).$ The derivatives of the functions $ω(k)$ at fixed $K$ and $ω(K)$ at fixed $k$ and of the function $K(k)$ at fixed $ω$ are described in detail. The curves $ω(k)$ at fixed $K$ are shown to be monotonic for real $K,$ while they may be looped for complex $K$ (i.e. in the stopband areas). The convexity of the closed (first) real isofrequency curve $K(k)$ is proved thus ruling out low-frequency caustics of group velocity. The results are relevant to the broad area of applicability of ordinary differential equation for scalar waves in 1D phononic (solid or fluid) and photonic crystals.

math-ph

Analytical formulation of 3D dynamic homogenization for periodic elastic systems

Homogenization of the equations of motion for a three dimensional periodic elastic system is considered. Expressions are obtained for the fully dynamic effective material parameters governing the spatially averaged fields by using the plane wave expansion (PWE) method. The effective equations are of Willis form (Willis 1997) with coupling between momentum and stress and tensorial inertia. The formulation demonstrates that the Willis equations of elastodynamics are closed under homogenization. The effective material parameters are obtained for arbitrary frequency and wavenumber combinations, including but not restricted to Bloch wave branches for wave propagation in the periodic medium. Numerical examples for a 1D system illustrate the frequency dependence of the parameters on Bloch wave branches and provide a comparison with an alternative dynamic effective medium theory (Shuvalov 2011) which also reduces to Willis form but with different effective moduli.

math-ph

Elastodynamics of radially inhomogeneous spherically anisotropic elastic materials in the Stroh formalism

A method is presented for solving elastodynamic problems in radially inhomogeneous elastic materials with spherical anisotropy, i.e.\ materials such that $c_{ijkl}= c_{ijkl}(r)$ in a spherical coordinate system ${r,θ,ϕ}$. The time harmonic displacement field $\mathbf{u}(r,θ,ϕ)$ is expanded in a separation of variables form with dependence on $θ,ϕ$ described by vector spherical harmonics with $r$-dependent amplitudes. It is proved that such separation of variables solution is generally possible only if the spherical anisotropy is restricted to transverse isotropy with the principal axis in the radial direction, in which case the amplitudes are determined by a first-order ordinary differential system. Restricted forms of the displacement field, such as $\mathbf{u}(r,θ)$, admit this type of separation of variables solutions for certain lower material symmetries. These results extend the Stroh formalism of elastodynamics in rectangular and cylindrical systems to spherical coordinates.

cond-mat.mtrl-sci

Nonlinear shear wave interaction at a frictional interface: Energy dissipation and generation of harmonics

Analytical and numerical modelling of the nonlinear interaction of shear wave with a frictional interface is presented. The system studied is composed of two homogeneous and isotropic elastic solids, brought into frictional contact by remote normal compression. A shear wave, either time harmonic or a narrow band pulse, is incident normal to the interface and propagates through the contact. Two friction laws are considered and their influence on interface behavior is investigated : Coulomb's law with a constant friction coefficient and a slip-weakening friction law which involves static and dynamic friction coefficients. The relationship between the nonlinear harmonics and the dissipated energy, and their dependence on the contact dynamics (friction law, sliding and tangential stress) and on the normal contact stress are examined in detail. The analytical and numerical results indicate universal type laws for the amplitude of the higher harmonics and for the dissipated energy, properly non-dimensionalized in terms of the pre-stress, the friction coefficient and the incident amplitude. The results suggest that measurements of higher harmonics can be used to quantify friction and dissipation effects of a sliding interface.

cond-mat.mtrl-sci

On the effective shear speed in 2D phononic crystals

The quasistatic limit of the antiplane shear-wave speed ('effective speed') $c$ in 2D periodic lattices is studied. Two new closed-form estimates of $c$ are derived by employing two different analytical approaches. The first proceeds from a standard background of the plane wave expansion (PWE). The second is a new approach, which resides in $\mathbf{x}$-space and centers on the monodromy matrix (MM) introduced in the 2D case as the multiplicative integral, taken in one coordinate, of a matrix with components being the operators with respect to the other coordinate. On the numerical side, an efficient PWE-based scheme for computing $c$ is proposed and implemented. The analytical and numerical findings are applied to several examples of 2D square lattices with two and three high-contrast components, for which the new PWE and MM estimates are compared with the numerical data and with some known approximations. It is demonstrated that the PWE estimate is most efficient in the case of densely packed stiff inclusions, especially when they form a symmetric lattice, while in general it is the MM estimate that provides the best overall fitting accuracy.

math-ph

Effective speed of sound in phononic crystals

A new formula for the effective quasistatic speed of sound $c$ in 2D and 3D periodic materials is reported. The approach uses a monodromy-matrix operator to enable direct integration in one of the coordinates and exponentially fast convergence in others. As a result, the solution for $c$ has a more closed form than previous formulas. It significantly improves the efficiency and accuracy of evaluating $c$ for high-contrast composites as demonstrated by a 2D example with extreme behavior.

math-ph

Effective Willis constitutive equations for periodically stratified anisotropic elastic media

A method to derive homogeneous effective constitutive equations for periodically layered elastic media is proposed. The crucial and novel idea underlying the procedure is that the coefficients of the dynamic effective medium can be associated with the matrix logarithm of the propagator over a unit period. The effective homogeneous equations are shown to have the structure of a Willis material, characterized by anisotropic inertia and coupling between momentum and strain, in addition to effective elastic constants. Expressions are presented for the Willis material parameters which are formally valid at any frequency and horizontal wavenumber as long as the matrix logarithm is well defined. The general theory is illustrated using the example of scalar SH motion. Low frequency, long wavelength expansions of the effective material parameters are also developed using a Magnus series and explicit estimates for the rate of convergence are derived.

cond-mat.mtrl-sci

Multiple scattering by cylinders immersed in fluid: high order approximations for the effective wavenumbers

Acoustic wave propagation in a fluid with a random assortment of identical cylindrical scatterers is considered. While the leading order correction to the effective wavenumber of the coherent wave is well established at dilute areal density ($n_0 $) of scatterers, in this paper the higher order dependence of the coherent wavenumber on $n_0$ is developed in several directions. Starting from the quasi-crystalline approximation (QCA) a consistent method is described for continuing the Linton and Martin formula, which is second order in $n_0$, to higher orders. Explicit formulas are provided for corrections to the effective wavenumber up to O$(n_0^4)$. Then, using the QCA theory as a basis, generalized self consistent schemes are developed and compared with self consistent schemes using other dynamic effective medium theories. It is shown that the Linton and Martin formula provides a closed self-consistent scheme, unlike some other approaches.

cond-mat.mtrl-sci

Acoustic Axes in Elasticity

New results are presented for the degeneracy condition of elastic waves in anisotropic materials. The existence of acoustic axes involves a traceless symmetric third order tensor that must vanish identically. It is shown that all previous representations of the degeneracy condition follow from this acoustic axis tensor. The conditions for existence of acoustic axes in elastic crystals of orthorhombic, tetragonal, hexagonal and cubic (RTHC) symmetry are reinterpreted using the geometrical methods developed here. Application to weakly anisotropic solids is discussed, and it is shown that the satisfaction of the acoustic axes conditions to first order in anisotropy does not in general coincide with true acoustic axes.

cond-mat.mtrl-sci