arXiv subjects

A. Nishizawa

Publications and source records attributed to A. Nishizawa.

6 recordsLinked to original sources

arXiv2025

Decadal upgrade strategy for KAGRA toward post-O5 gravitational-wave astronomy

The KAGRA Collaboration has investigated a ten-year upgrade strategy for the KAGRA gravitational wave detector, considering a total of 14 upgrade options that vary in mirror mass, quantum noise reduction techniques, and the quality of cryogenic suspensions. We evaluated the scientific potential of these configurations with a focus on key targets such as parameter estimation of compact binary coalescences, binary neutron star post-merger signals, and continuous gravitational waves. Rather than aiming to improve all science cases uniformly, we prioritized those most sensitive to the detector configuration. Technical feasibility was assessed based on required hardware developments, associated R\&D efforts, cost, and risk. Our study finds that a high-frequency upgrade plan that enhances sensitivity over a broad frequency range above ~200 Hz offers the best balance between scientific return and technical feasibility. Such an upgrade would enable sky localization of binary neutron star mergers at 100 Mpc to better than 0.5 deg$^2$ in a LIGO-Virgo-KAGRA network, and improve the measurement precision of tidal deformability parameter by approximately 10% at median, compared to a network without KAGRA.

gr-qc↗

arXiv2025

Identification of Noise-Associated Glitches in KAGRA O3GK with Hveto

Transient noise ("glitches") in gravitational wave detectors can mimic or obscure true signals, significantly reducing detection sensitivity. Identifying and excluding glitch-contaminated data segments is therefore crucial for enhancing the performance of gravitational-wave searches. We perform a noise analysis of the KAGRA data obtained during the O3GK observation. Our analysis is performed with hierarchical veto (Hveto) which identifies noises based on the statistical time correlation between the main channel and the auxiliary channels. A total of 2,531 noises were vetoed by 28 auxiliary channels with the configuration (i.e., signal-to-noise threshold set to 8) that we chose for Hveto. We identify vetoed events as glitches on the spectrogram via visual examination after plotting them with Q-transformation. By referring to the Gravity Spy project, we categorize 2,354 glitches into six types: blip, helix, scratchy, and scattered light, which correspond to those listed in Gravity Spy, and dot and line, which are not found in the Gravity Spy classification and are thus named based on their spectrogram morphology in KAGRA data. The remaining 177 glitches are determined not to belong to any of these six types. We show how the KAGRA glitch types are related to each subsystem of KAGRA. To investigate the possible correlation between the main channel and the round winner - an auxiliary channel statistically associated with the main channel for vetoing purposes - we visually examine the similarity or difference in the glitch pattern on the spectrogram. We compare the qualitative correlation found through visual examination with coherence, which is known to provide quantitative measurement for the correlation between the main channel and each auxiliary channel. Our comprehensive noise analysis will help improve the data quality of KAGRA by applying it to future KAGRA observation data.

gr-qc↗

arXiv2022

The eROSITA Final Equatorial-Depth Survey (eFEDS): Identification and characterization of the counterparts to the point-like sources

In November 2019, eROSITA on board of SRG observatory started to map the entire sky in X-rays. After the 4-year survey program, it will reach flux limits about 25 times deeper than ROSAT. During the SRG Performance Verification phase, eROSITA observed a contiguous 140 deg$^2$ area of the sky down to the final depth of the eROSITA all-sky survey ("eROSITA Final Equatorial-Depth Survey": eFEDS), with the goal of obtaining a census of the X-ray emitting populations (stars, compact objects, galaxies, clusters of galaxies, AGN) that will be discovered over the entire sky. This paper presents the identification of the counterparts to the point-sources detected in eFEDS in the Main and Hard samples described in Brunner et al 2021, and their multi-wavelength properties, including redshift. For the identification of the counterparts we combined the results from two independent methods (NWAY and ASTROMATCH), trained on the multi-wavelength properties of a sample of 23k XMM-Newton sources detected in the DESI Legacy Imaging Survey DR8. Then spectroscopic redshifts and photometry from ancillary surveys are collated for the computation of photometric redshifts. The eFEDS sources with a reliable counterparts are 24774/27369 (90.5\%) in the Main sample and 231/246 (93.9\%) in the Hard sample, including 2514 (3) sources for which a second counterpart is equally likely. [abridged] This paper is accompanying the eROSITA early data release of all the observations performed during the performance and verification phase. Together with the catalogs of primary and secondary counterparts to the Main and Hard samples of the eFEDS survey this paper releases their multi-wavelength properties and redshifts.

astro-ph.HE↗

arXiv2019

Vibration isolation system with a compact damping system for power recycling mirrors of KAGRA

A vibration isolation system called Type-Bp system used for power recycling mirrors has been developed for KAGRA, the interferometric gravitational-wave observatory in Japan. A suspension of the Type-Bp system passively isolates an optic from seismic vibration using three main pendulum stages equipped with two vertical vibration isolation systems. A compact reaction mass around each of the main stages allows for achieving sufficient damping performance with a simple feedback as well as vibration isolation ratio. Three Type-Bp systems were installed in KAGRA, and were proved to satisfy the requirements on the damping performance, and also on estimated residual displacement of the optics.

physics.ins-det↗

arXiv2009

Development of displacement- and frequency-noise-free interferometer in 3-D configuration for gravitational wave detection

The displacement- and frequency-noise-free interferometer (DFI) is a multiple laser interferometer array for gravitational wave detection free from both the displacement noise of optics and laser frequency noise. So far, partial experimental demonstrations of DFI have been done in 2-D table top experiments. In this paper, we report the complete demonstration of a 3-D DFI. The DFI consists of four Mach-Zehnder interferometers with four mirrors and two beamsplitters. The displacement noises both of mirrors and beamsplitters were suppressed by up to 40 dB. The non-vanishing DFI response to a gravitational wave was successfully confirmed using multiple electro-optic modulators and computing methods.

gr-qc↗

arXiv1999

Transition between two ferromagnetic states driven by orbital ordering in La_{0.88}Sr_{0.12}MnO_3

A lightly doped perovskite mangantite La_{0.88}Sr_{0.12}MnO_3 exhibits a phase transition at T_{OO}=145 K from a ferromagnetic metal (T_C=172 K) to a novel ferromagnetic insulator.We identify that the key parameter in the transition is the orbital degree of freedom in e_g electrons. By utilizing the resonant x-ray scattering technique, orbital ordering is directly detected below T_{OO}, in spite of a significant diminution of the cooperative Jahn-Teller distortion. The new experimental features are well described by a theory treating the orbital degree of freedom under strong electron correlation. The present experimental and theoretical studies uncover a crucial role of the orbital degree in the metal-insulator transition in lightly doped manganites.

cond-mat.str-el↗