arXiv subjects

A. P. Cooper

Publications and source records attributed to A. P. Cooper.

25 records · Page 2Linked to original sources

arXiv2023

The DESI Survey Validation: Results from Visual Inspection of Bright Galaxies, Luminous Red Galaxies, and Emission Line Galaxies

The Dark Energy Spectroscopic Instrument (DESI) Survey has obtained a set of spectroscopic measurements of galaxies to validate the final survey design and target selections. To assist in these tasks, we visually inspect (VI) DESI spectra of approximately 2,500 bright galaxies, 3,500 luminous red galaxies (LRGs), and 10,000 emission line galaxies (ELGs), to obtain robust redshift identifications. We then utilize the VI redshift information to characterize the performance of the DESI operation. Based on the VI catalogs, our results show that the final survey design yields samples of bright galaxies, LRGs, and ELGs with purity greater than $99\%$. Moreover, we demonstrate that the precision of the redshift measurements is approximately 10 km/s for bright galaxies and ELGs and approximately 40 km/s for LRGs. The average redshift accuracy is within 10 km/s for the three types of galaxies. The VI process also helps improve the quality of the DESI data by identifying spurious spectral features introduced by the pipeline. Finally, we show examples of unexpected real astronomical objects, such as Ly$α$ emitters and strong lensing candidates, identified by VI. These results demonstrate the importance and utility of visually inspecting data from incoming and upcoming surveys, especially during their early operation phases.

astro-ph.CO↗

arXiv2023

The Spectroscopic Data Processing Pipeline for the Dark Energy Spectroscopic Instrument

We describe the spectroscopic data processing pipeline of the Dark Energy Spectroscopic Instrument (DESI), which is conducting a redshift survey of about 40 million galaxies and quasars using a purpose-built instrument on the 4-m Mayall Telescope at Kitt Peak National Observatory. The main goal of DESI is to measure with unprecedented precision the expansion history of the Universe with the Baryon Acoustic Oscillation technique and the growth rate of structure with Redshift Space Distortions. Ten spectrographs with three cameras each disperse the light from 5000 fibers onto 30 CCDs, covering the near UV to near infrared (3600 to 9800 Angstrom) with a spectral resolution ranging from 2000 to 5000. The DESI data pipeline generates wavelength- and flux-calibrated spectra of all the targets, along with spectroscopic classifications and redshift measurements. Fully processed data from each night are typically available to the DESI collaboration the following morning. We give details about the pipeline's algorithms, and provide performance results on the stability of the optics, the quality of the sky background subtraction, and the precision and accuracy of the instrumental calibration. This pipeline has been used to process the DESI Survey Validation data set, and has exceeded the project's requirements for redshift performance, with high efficiency and a purity greater than 99 percent for all target classes.

astro-ph.IM↗

arXiv2022

Overview of the Instrumentation for the Dark Energy Spectroscopic Instrument

The Dark Energy Spectroscopic Instrument (DESI) has embarked on an ambitious five-year survey to explore the nature of dark energy with spectroscopy of 40 million galaxies and quasars. DESI will determine precise redshifts and employ the Baryon Acoustic Oscillation method to measure distances from the nearby universe to z > 3.5, as well as measure the growth of structure and probe potential modifications to general relativity. In this paper we describe the significant instrumentation we developed for the DESI survey. The new instrumentation includes a wide-field, 3.2-deg diameter prime-focus corrector that focuses the light onto 5020 robotic fiber positioners on the 0.812 m diameter, aspheric focal surface. The positioners and their fibers are divided among ten wedge-shaped petals. Each petal is connected to one of ten spectrographs via a contiguous, high-efficiency, nearly 50 m fiber cable bundle. The ten spectrographs each use a pair of dichroics to split the light into three channels that together record the light from 360 - 980 nm with a resolution of 2000 to 5000. We describe the science requirements, technical requirements on the instrumentation, and management of the project. DESI was installed at the 4-m Mayall telescope at Kitt Peak, and we also describe the facility upgrades to prepare for DESI and the installation and functional verification process. DESI has achieved all of its performance goals, and the DESI survey began in May 2021. Some performance highlights include RMS positioner accuracy better than 0.1", SNR per \sqrtÅ > 0.5 for a z > 2 quasar with flux 0.28e-17 erg/s/cm^2/A at 380 nm in 4000s, and median SNR = 7 of the [OII] doublet at 8e-17 erg/s/cm^2 in a 1000s exposure for emission line galaxies at z = 1.4 - 1.6. We conclude with highlights from the on-sky validation and commissioning of the instrument, key successes, and lessons learned. (abridged)

astro-ph.IM↗

arXiv2017

The cosmic assembly of stellar haloes in massive Early-Type Galaxies

Using the exquisite depth of the Hubble Ultra Deep Field (HUDF12 programme) dataset, we explore the ongoing assembly of the outermost regions of the most massive galaxies ($\rm M_{\rm stellar}\geq$ 5$\times$10$^{10}$ M$_{\odot}$) at $z \leq$ 1. The outskirts of massive objects, particularly Early-Types Galaxies (ETGs), are expected to suffer a dramatic transformation across cosmic time due to continuous accretion of small galaxies. HUDF imaging allows us to study this process at intermediate redshifts in 6 massive galaxies, exploring the individual surface brightness profiles out to $\sim$25 effective radii. We find that 5-20\% of the total stellar mass for the galaxies in our sample is contained within 10 $< R <$ 50 kpc. These values are in close agreement with numerical simulations, and higher than those reported for local late-type galaxies ($\lesssim$5\%). The fraction of stellar mass stored in the outer envelopes/haloes of Massive Early-Type Galaxies increases with decreasing redshift, being 28.7\% at $< z > =$ 0.1, 15.1\% at $< z > =$ 0.65 and 3.5\% at $< z > =$ 2. The fraction of mass in diffuse features linked with ongoing minor merger events is $>$ 1-2\%, very similar to predictions based on observed close pair counts. Therefore, the results for our small albeit meaningful sample suggest that the size and mass growth of the most massive galaxies have been solely driven by minor and major merging from $z =$ 1 to today.

astro-ph.GA↗

arXiv2011

Substructure in the stellar halos of the Aquarius simulations

We characterize substructure in the simulated stellar halos of Cooper et al. (2010) which were formed by the disruption of satellite galaxies within the cosmological N-body simulations of galactic halos of the Aquarius Project. These stellar halos exhibit a wealth of tidal features: broad overdensities and very narrow faint streams akin to those observed around the Milky Way. The substructures are distributed anisotropically on the sky, a characteristic that should become apparent in the next generation of photometric surveys. The normalized RMS of the density of stars on the sky appears to be systematically larger for our halos compared to the value estimated for the Milky Way from main sequence turn-off stars in the Sloan Digital Sky Survey. We show that this is likely to be due in part to contamination by faint QSOs and redder main sequence stars, and might suggest that ~10% of the Milky Way halo stars have formed in-situ.

astro-ph.GA↗

arXiv2011

A Two-Point Correlation Function For Galactic Halo Stars

We describe a correlation function statistic that quantifies the amount of spatial and kinematic substructure in the stellar halo. We test this statistic using model stellar halo realizations constructed from the Aquarius suite of six high-resolution N-body simulations in combination with the Galform semi-analytic galaxy formation model. These simulations show considerable scatter in the properties of stellar haloes. We find that our statistic can distinguish between these plausible alternatives for the global structure of the Milky Way stellar halo. We compare with observational data and show that pencil beam surveys of ~100 tracer stars (such as the Spaghetti Survey) are not sufficient to constrain the degree of structure in the Milky Way halo with this statistic. Larger area surveys with >1000 tracer stars (such as BHB stars in the Sloan Digital Sky Survey) provide much tighter constraints on comparisons between models and data. In our simulations, we find examples of haloes with spatial and kinematic substructure consistent with the available Milky Way data.

astro-ph.GA↗

arXiv2010

Galactic stellar haloes in the CDM model

We present six simulations of galactic stellar haloes formed by the tidal disruption of accreted dwarf galaxies in a fully cosmological setting. Our model is based on the Aquarius project, a suite of high resolution N-body simulations of individual dark matter haloes. We tag subsets of particles in these simulations with stellar populations predicted by the Galform semi-analytic model. Our method self-consistently tracks the dynamical evolution and disruption of satellites from high redshift. The luminosity function and structural properties of surviving satellites, which agree well with observations, suggest that this technique is appropriate. We find that accreted stellar haloes are assembled between 1<z<7 from less than 5 significant progenitors. These progenitors are old, metal-rich satellites with stellar masses similar to the brightest Milky Way dwarf spheroidals. In contrast to previous stellar halo simulations, we find that several of these major contributors survive as self-bound systems to the present day. Both the number of these significant progenitors and their infall times are inherently stochastic. This results in great diversity among our stellar haloes, which amplifies small differences between the formation histories of their dark halo hosts. The masses and density/surface-brightness profiles of the stellar haloes are consistent with expectations from the Milky Way and M31. Each halo has a complex structure, consisting of well-mixed components, tidal streams, shells and other subcomponents. This structure is not adequately described by smooth models. We find one example of an accreted thick disk. Contrasts in age and metallicity between halo stars and those in surviving satellites are in broad agreement with recent observations. [Abridged]

astro-ph.GA↗