arXiv subjects

A. Papadopoulos

Publications and source records attributed to A. Papadopoulos.

18 recordsLinked to original sources

arXiv2022

Strong europium luminescence in lanthan-euripium-erbium-calcium-vanadate nanocrystals, the result of codoping optimization

Co-doped with calcium, europium and erbium ions lanthanum vanadate crystalline nanoparticles are synthesized and investigated with a goal to clarify the mechanisms of calcium and erbium impurities effects on europium ions luminescence and to find compositions with enhanced luminescence intensity. The XRD analysis reveals dependence of crystal structure on dopants concentration: monoclinic crystal phase is observed for low dopant concentrations and content of tetragonal crystal phase increases with dopant concentrations increase. The SEM investigation reveals formation of nanoparticles with two types of shapes. Photoluminescence spectra consist of lines caused by inner transitions in the erbium and europium ions. It has been shown that dependence of the europium ions luminescence intensity on the calcium and erbium concentrations is caused by cumulative effects of dopants on crystal lattice structure, on defects in the first coordination sphere of the europium ions and on efficiency of excitation energy transfer.

cond-mat.mtrl-sci↗

arXiv2021

HELP: The Herschel Extragalactic Legacy Project

We present the Herschel Extragalactic Legacy Project (HELP). This project collates, curates, homogenises, and creates derived data products for most of the premium multi-wavelength extragalactic data sets. The sky boundaries for the first data release cover 1270 deg2 defined by the Herschel SPIRE extragalactic survey fields; notably the Herschel Multi-tiered Extragalactic Survey (HerMES) and the Herschel Atlas survey (H-ATLAS). Here, we describe the motivation and principal elements in the design of the project. Guiding principles are transparent or "open" methodologies with care for reproducibility and identification of provenance. A key element of the design focuses around the homogenisation of calibration, meta data and the provision of information required to define the selection of the data for statistical analysis. We apply probabilistic methods that extract information directly from the images at long wavelengths, exploiting the prior information available at shorter wavelengths and providing full posterior distributions rather than maximum likelihood estimates and associated uncertainties as in traditional catalogues. With this project definition paper we provide full access to the first data release of HELP; Data Release 1 (DR1), including a monolithic map of the largest SPIRE extragalactic field at 385 deg2 and 18 million measurements of PACS and SPIRE fluxes. We also provide tools to access and analyse the full HELP database. This new data set includes far-infrared photometry, photometric redshifts, and derived physical properties estimated from modelling the spectral energy distributions.

astro-ph.GA↗

arXiv2020

Laser engineering of biomimetic surfaces

The exciting properties of micro- and nano-patterned surfaces found in natural species hide a virtually endless potential of technological ideas, opening new opportunities for innovation and exploitation in materials science and engineering. Due to the diversity of biomimetic surface functionalities, inspirations from natural surfaces are interesting for a broad range of applications in engineering, including phenomena of adhesion, friction, wear, lubrication, wetting phenomena, self-cleaning, antifouling, antibacterial phenomena, thermoregulation and optics. Lasers are increasingly proving to be promising tools for the precise and controlled structuring of materials at micro- and nano-scales. When ultrashort-pulsed lasers are used, the optimal interplay between laser and material parameters enables structuring down to the nanometer scale. Besides this, a unique aspect of laser processing technology is the possibility for material modifications at multiple (hierarchical) length scales, leading to the complex biomimetic micro- and nano-scale patterns, while adding a new dimension to structure optimization. This article reviews the current state of the art of laser processing methodologies, which are being used for the fabrication of bioinspired artificial surfaces to realize extraordinary wetting, optical, mechanical, and biological-active properties for numerous applications. The innovative aspect of laser functionalized biomimetic surfaces for a wide variety of current and future applications is particularly demonstrated and discussed. The article concludes with illustrating the wealth of arising possibilities and the number of new laser micro/nano fabrication approaches for obtaining complex high-resolution features, which prescribe a future where control of structures and subsequent functionalities are beyond our current imagination.

physics.optics↗

arXiv2020

Pulsed laser deposition of the doped lanthanum vanadate nanoparticles on glass and silicon substrates

Thin films from the lanthanum vanadate nanoparticles were successfully grown by pulsed laser deposition method on glass and silicon substrates for the first time. Morphology and thickness of the films depend on a type of substrate and a number of pulses. The films are of 27 to 220 nm thickness and formed by very small particles up to 20 nm and also can contain single nanoparticles with dimensions 40 to 60 nm and sometimes agglomerates of nanoparticles. Spectral properties of the samples have been investigated and discussed. The vanadate films deposited on the silicon substrates lead to appearance of antireflection properties in the visible range. Luminescence spectra of the investigated films consist of narrow lines caused by f-f transitions in the europium ions. For the samples on glass substrates the wide bands of glass emission are also contributed to the spectra. The optimal experimental conditions those allowed to obtain films promising for applications as luminescent converters are considered.

physics.app-ph↗

arXiv2020

Structure and spectroscopy characterization of La$_{1-x}$Sm$_x$VO4 luminescent nanoparticles synthesized co-precipitation and sol-gel methods

The Sm-activated orthvanadate nanoparticles were synthesized by co-precipitation and sol-gel methods. XRD study has shown that synthesized samples are characterized by monoclinic or tetragonal structure as well as their mixture dependently on Sm concentration and methods of synthesis. Influence of method of synthesis on morphology of nanoparticles, their absorption, diffuse reflectance and emission spectra was observed and studied.

cond-mat.mtrl-sci↗

arXiv2018

HELP: modelling the spectral energy distributions of Herschel detected galaxies in the ELAIS N1 field

The HELP project focuses on the data from ESA's Herschel mission, which covered over 1300$deg^2$ and is preparing to publish a multi-wavelength catalogue of millions of objects. Our main goal is to find the best approach to simultaneously fitting SEDs of millions of galaxies across a wide redshift range to obtain homogeneous estimates of the main physical parameters of detected IR galaxies. We perform SED fitting on the UV/NIR to FIR emission of 42 047 galaxies from the pilot HELP field: ELAIS N1. We use the latest release of CIGALE, a galaxy SED fitting code relying on energy balance, to deliver the main physical parameters such as $M_{star}$, SFR, and $L_{dust}$. We implement additional quality criteria to the fits by calculating $χ^2$ values for the stellar and dust part of the spectra independently. These criteria allow us to identify the best fits and to identify peculiar galaxies. We perform the SED fitting by assuming three different dust attenuation laws separately allowing us to test the impact of the assumed law on estimated physical parameters. We implemented two additional quality value checks for the SED fitting method based on $M_{star}$ estimation and energy budget. This method allows us to identify possible objects with incorrect matching in the catalogue and peculiar galaxies; we found 351 possible candidates of lensed galaxies using two complementary $χ^2$s criteria (stellar and IR) and $z_{phot}$ calculated for the IR part of the spectrum only. We find that the attenuation law has an important impact on the $M_{star}$ estimate (on average leading to disparities of a factor of two). We derive the relation between $M_{star}$ estimates obtained by different attenuation laws and we find the best recipe for our sample. We also make independent estimates of the total $L_{dust}$ parameter from stellar emission by fitting the galaxies with and without IR data separately.

astro-ph.GA↗

arXiv2018

Scattering of radio frequency waves by cylindrical blobs in the plasma edge in tokamaks

Radio frequency waves are routinely used in tokamak fusion plasmas for plasma heating, current control, and as well as in diagnostics. These waves are excited by antenna structures placed near the tokamak's wall and they have to propagate through a turbulent layer known as scrape-off layer, before reaching the core plasma (which is their target). This layer exhibits coherent density fluctuations in the form of blobs and filaments. The scattering processes of RF plane waves by single blob is studied, with the assumption that the blob has cylindrical shape and infinite length. The axis of the blob is not necessarily aligned with the externally applied magnetic field in the case of plane waves. The investigation concerns the case of Electron Cyclotron (EC) waves ($f_0$=170 $GHz$) for ITER-like and Medium Size Tokamak applications (such as TCV, ASDEX-U, DIII-D, etc) as well as the case of Low Hybrid (LH) waves ($f_0$=4.6 $GHz$) for ALCATOR C-MOD Tokamak device. The study covers for a variety of density contrasts between the blobs and the ambient plasma and a wide range of blob radii.

physics.plasm-ph↗

arXiv2017

Tracing the evolution of dust obscured star-formation and accretion back to the reionisation epoch with SPICA

Our current knowledge of star formation and accretion luminosity at high-redshift (z>3-4), as well as the possible connections between them, relies mostly on observations in the rest-frame ultraviolet (UV), which are strongly affected by dust obscuration. Due to the lack of sensitivity of past and current infrared (IR) instrumentation, so far it has not been possible to get a glimpse into the early phases of the dust-obscured Universe. Among the next generation of IR observatories, SPICA, observing in the 12-350 micron range, will be the only facility that can enable us to make the required leap forward in understanding the obscured star-formation rate and black-hole accretion rate densities (SFRD and BHARD, respectively) with respect to what Spitzer and Herschel achieved in the mid- and far-IR at z<3. In particular, SPICA will have the unique ability to trace the evolution of the obscured SFRD and BHARD over cosmic time, from the peak of their activity back to the reionisation epoch (i.e., 3<z<6-7), where its predecessors had severe limitations. Here we discuss the potential of both deep and shallow photometric surveys performed with the SPICA mid-IR instrument (SMI), enabled by the very low level of impact of dust obscuration in a band centred at 34 micron. These unique unbiased photometric surveys that SPICA will perform will be followed up by observations both with the SPICA spectrometers and with other facilities at shorter and longer wavelengths, with the aim to fully characterise the evolution of AGNs and star-forming galaxies after re-ionisation.

astro-ph.GA↗

arXiv2017

DES15E2mlf: A Spectroscopically Confirmed Superluminous Supernova that Exploded 3.5 Gyr After the Big Bang

We present the Dark Energy Survey (DES) discovery of DES15E2mlf, the most distant superluminous supernova (SLSN) spectroscopically confirmed to date. The light curves and Gemini spectroscopy of DES15E2mlf indicate that it is a Type I superluminous supernova (SLSN-I) at z = 1.861 (a lookback time of ~10 Gyr) and peaking at M_AB = -22.3 +/- 0.1 mag. Given the high redshift, our data probe the rest-frame ultraviolet (1400-3500 A) properties of the SN, finding velocity of the C III feature changes by ~5600 km/s over 14 days around maximum light. We find the host galaxy of DES15E2mlf has a stellar mass of 3.5^+3.6_-2.4 x 10^9 M_sun, which is more massive than the typical SLSN-I host galaxy.

astro-ph.GA↗

arXiv2016

The Dark Energy Survey: more than dark energy - an overview

This overview article describes the legacy prospect and discovery potential of the Dark Energy Survey (DES) beyond cosmological studies, illustrating it with examples from the DES early data. DES is using a wide-field camera (DECam) on the 4m Blanco Telescope in Chile to image 5000 sq deg of the sky in five filters (grizY). By its completion the survey is expected to have generated a catalogue of 300 million galaxies with photometric redshifts and 100 million stars. In addition, a time-domain survey search over 27 sq deg is expected to yield a sample of thousands of Type Ia supernovae and other transients. The main goals of DES are to characterise dark energy and dark matter, and to test alternative models of gravity; these goals will be pursued by studying large scale structure, cluster counts, weak gravitational lensing and Type Ia supernovae. However, DES also provides a rich data set which allows us to study many other aspects of astrophysics. In this paper we focus on additional science with DES, emphasizing areas where the survey makes a difference with respect to other current surveys. The paper illustrates, using early data (from `Science Verification', and from the first, second and third seasons of observations), what DES can tell us about the solar system, the Milky Way, galaxy evolution, quasars, and other topics. In addition, we show that if the cosmological model is assumed to be Lambda+ Cold Dark Matter (LCDM) then important astrophysics can be deduced from the primary DES probes. Highlights from DES early data include the discovery of 34 Trans Neptunian Objects, 17 dwarf satellites of the Milky Way, one published z > 6 quasar (and more confirmed) and two published superluminous supernovae (and more confirmed).

astro-ph.CO↗

arXiv2016

HELP: XID+, The Probabilistic De-blender for Herschel SPIRE maps

We have developed a new prior-based source extraction tool, XID+, to carry out photometry in the Herschel SPIRE maps at the positions of known sources. XID+ is developed using a probabilistic Bayesian framework which provides a natural framework in which to include prior information, and uses the Bayesian inference tool, Stan, to obtain the full posterior probability distribution on flux estimates. In this paper, we discuss the details of XID+ and demonstrate the basic capabilities and performance by running it on simulated SPIRE maps resembling the COSMOS field, and comparing to the current prior-based source extraction tool DESPHOT. We show that not only does XID+ perform better on metrics such as flux accuracy and flux uncertainty accuracy, we illustrate how obtaining the posterior probability distribution can help overcome some of the issues inherent with maximum likelihood based source extraction routines. We run XID+ on the COSMOS SPIRE maps from HerMES, using a 24 $\mathrm{μm}$ catalogue as a prior and show the marginalised SPIRE colour-colour plot and marginalised contribution to the cosmic infrared background at the SPIRE wavelengths. XID+ is a core tool arising from the Herschel Extragalactic Legacy Project (HELP) and we discuss how additional work within HELP providing prior information on fluxes can and will be utilised. The software is available at https://github.com/H-E-L-P/XID_plus. We also provide the data product for COSMOS. We believe this is the first time that the full posterior probability of galaxy photometry has been provided as a data product.

astro-ph.GA↗

arXiv2016

HELP: star formation as function of galaxy environmentwith Herschel

The Herschel Extragalactic Legacy Project (HELP) brings together a vast range of data from many astronomical observatories. Its main focus is on the Herschel data, which maps dust obscured star formation over 1300 deg$^2$. With this unprecedented combination of data sets, it is possible to investigate how the star formation vs stellar mass relation (main-sequence) of star-forming galaxies depends on environment. In this pilot study we explore this question between 0.1 < z < 3.2 using data in the COSMOS field. We estimate the local environment from a smoothed galaxy density field using the full photometric redshift probability distribution. We estimate star formation rates by stacking the SPIRE data from the Herschel Multi-tiered Extragalactic Survey (HerMES). Our analysis rules out the hypothesis that the main-sequence for star-forming systems is independent of environment at 1.5 < z < 2, while a simple model in which the mean specific star formation rate declines with increasing environmental density gives a better description. However, we cannot exclude a simple hypothesis in which the main-sequence for star-forming systems is independent of environment at z < 1.5 and z > 2. We also estimate the evolution of the star formation rate density in the COSMOS field and our results are consistent with previous measurements at z < 1.5 and z > 2 but we find a $1.4^{+0.3}_{-0.2}$ times higher peak value of the star formation rate density at $z \sim 1.9$.

astro-ph.GA↗

arXiv2016

DES14X3taz: A Type I Superluminous Supernova Showing a Luminous, Rapidly Cooling Initial Pre-Peak Bump

We present DES14X3taz, a new hydrogen-poor super luminous supernova (SLSN-I) discovered by the Dark Energy Survey (DES) supernova program, with additional photometric data provided by the Survey Using DECam for Superluminous Supernovae (SUDSS). Spectra obtained using OSIRIS on the Gran Telescopio CANARIAS (GTC) show DES14X3taz is a SLSN-I at z=0.608. Multi-color photometry reveals a double-peaked light curve: a blue and relatively bright initial peak that fades rapidly prior to the slower rise of the main light curve. Our multi-color photometry allows us, for the first time, to show that the initial peak cools from 22,000K to 8,000K over 15 rest-frame days, and is faster and brighter than any published core-collapse supernova, reaching 30% of the bolometric luminosity of the main peak. No physical Nickel powered model can fit this initial peak. We show that a shock-cooling model followed by a magnetar driving the second phase of the light curve can adequately explain the entire light curve of DES14X3taz. Models involving the shock-cooling of extended circumstellar material at a distance of ~400 solar radii are preferred over the cooling of shock-heated surface layers of a stellar envelope. We compare DES14X3taz to the few double-peaked SLSN-I events in the literature. Although the rise-times and characteristics of these initial peaks differ, there exists the tantalizing possibility that they can be explained by one physical interpretation.

astro-ph.SR↗

arXiv2015

Automated Transient Identification in the Dark Energy Survey

We describe an algorithm for identifying point-source transients and moving objects on reference-subtracted optical images containing artifacts of processing and instrumentation. The algorithm makes use of the supervised machine learning technique known as Random Forest. We present results from its use in the Dark Energy Survey Supernova program (DES-SN), where it was trained using a sample of 898,963 signal and background events generated by the transient detection pipeline. After reprocessing the data collected during the first DES-SN observing season (Sep. 2013 through Feb. 2014) using the algorithm, the number of transient candidates eligible for human scanning decreased by a factor of 13.4, while only 1 percent of the artificial Type Ia supernovae (SNe) injected into search images to monitor survey efficiency were lost, most of which were very faint events. Here we characterize the algorithm's performance in detail, and we discuss how it can inform pipeline design decisions for future time-domain imaging surveys, such as the Large Synoptic Survey Telescope and the Zwicky Transient Facility. An implementation of the algorithm and the training data used in this paper are available at http://portal.nersc.gov/project/dessn/autoscan.

astro-ph.IM↗

arXiv2015

The Difference Imaging Pipeline for the Transient Search in the Dark Energy Survey

We describe the difference imaging pipeline (DiffImg) used to detect transients in deep images from the Dark Energy Survey Supernova program (DES-SN) in its first observing season from Aug 2013 through Feb 2014. DES-SN is a search for transients in which ten 3-deg^2 fields are repeatedly observed in the g,r,i,z passbands with a cadence of about 1 week. The observing strategy has been optimized to measure high-quality light curves and redshifts for thousands of Type Ia supernova (SN Ia) with the goal of measuring dark energy parameters. The essential DiffImg functions are to align each search image to a deep reference image, do a pixel-by-pixel subtraction, and then examine the subtracted image for significant positive detections of point-source objects. The vast majority of detections are subtraction artifacts, but after selection requirements and image filtering with an automated scanning program, there are 130 detections per deg^2 per observation in each band, of which only 25% are artifacts. Of the 7500 transients discovered by DES-SN in its first observing season, each requiring a detection on at least 2 separate nights, Monte Carlo simulations predict that 27% are expected to be supernova. Another 30% of the transients are artifacts, and most of the remaining transients are AGN and variable stars. Fake SNe Ia are overlaid onto the images to rigorously evaluate detection efficiencies, and to understand the DiffImg performance. The DiffImg efficiency measured with fake SNe agrees well with expectations from a Monte Carlo simulation that uses analytical calculations of the fluxes and their uncertainties. In our 8 "shallow" fields with single-epoch 50% completeness depth 23.5, the SN Ia efficiency falls to 1/2 at redshift z 0.7, in our 2 "deep" fields with mag-depth 24.5, the efficiency falls to 1/2 at z 1.1.

astro-ph.IM↗

arXiv2015

OzDES multi-fibre spectroscopy for the Dark Energy Survey: first-year operation and results

OzDES is a five-year, 100-night, spectroscopic survey on the Anglo-Australian Telescope, whose primary aim is to measure redshifts of approximately 2,500 Type Ia supernovae host galaxies over the redshift range 0.1 < z < 1.2, and derive reverberation-mapped black hole masses for approximately 500 active galactic nuclei and quasars over 0.3 < z < 4.5. This treasure trove of data forms a major part of the spectroscopic follow-up for the Dark Energy Survey for which we are also targeting cluster galaxies, radio galaxies, strong lenses, and unidentified transients, as well as measuring luminous red galaxies and emission line galaxies to help calibrate photometric redshifts. Here we present an overview of the OzDES program and our first-year results. Between Dec 2012 and Dec 2013, we observed over 10,000 objects and measured more than 6,000 redshifts. Our strategy of retargeting faint objects across many observing runs has allowed us to measure redshifts for galaxies as faint as m_r=25 mag. We outline our target selection and observing strategy, quantify the redshift success rate for different types of targets, and discuss the implications for our main science goals. Finally, we highlight a few interesting objects as examples of the fortuitous yet not totally unexpected discoveries that can come from such a large spectroscopic survey.

astro-ph.GA↗

arXiv2015

DES13S2cmm: The First Superluminous Supernova from the Dark Energy Survey

We present DES13S2cmm, the first spectroscopically-confirmed superluminous supernova (SLSN) from the Dark Energy Survey (DES). We briefly discuss the data and search algorithm used to find this event in the first year of DES operations, and outline the spectroscopic data obtained from the European Southern Observatory (ESO) Very Large Telescope to confirm its redshift (z = 0.663 +/- 0.001 based on the host-galaxy emission lines) and likely spectral type (type I). Using this redshift, we find M_U_peak = -21.05 +0.10 -0.09 for the peak, rest-frame U-band absolute magnitude, and find DES13S2cmm to be located in a faint, low metallicity (sub-solar), low stellar-mass host galaxy (log(M/M_sun) = 9.3 +/- 0.3); consistent with what is seen for other SLSNe-I. We compare the bolometric light curve of DES13S2cmm to fourteen similarly well-observed SLSNe-I in the literature and find it possesses one of the slowest declining tails (beyond +30 days rest frame past peak), and is the faintest at peak. Moreover, we find the bolometric light curves of all SLSNe-I studied herein possess a dispersion of only 0.2-0.3 magnitudes between +25 and +30 days after peak (rest frame) depending on redshift range studied; this could be important for 'standardising' such supernovae, as is done with the more common type Ia. We fit the bolometric light curve of DES13S2cmm with two competing models for SLSNe-I - the radioactive decay of 56Ni, and a magnetar - and find that while the magnetar is formally a better fit, neither model provides a compelling match to the data. Although we are unable to conclusively differentiate between these two physical models for this particular SLSN-I, further DES observations of more SLSNe-I should break this degeneracy, especially if the light curves of SLSNe-I can be observed beyond 100 days in the rest frame of the supernova.

astro-ph.HE↗

arXiv2014

Multiuser Broadcast Erasure Channel with Feedback and Side Information, and Related Index Coding Results

We consider the N-user broadcast erasure channel with public feedback and side information. Before the beginning of transmission, each receiver knows a function of the messages of some of the other receivers. This situation arises naturally in wireless and in particular cognitive networks where a node may overhear transmitted messages destined to other nodes before transmission over a given broadcast channel begins. We provide an upper bound to the capacity region of this system. Furthermore, when the side information is linear, we show that the bound is tight for the case of two-user broadcast channels. The special case where each user knows the whole or nothing of the message of each other node, constitutes a generalization of the index coding problem. For this instance, and when there are no channel errors, we show that the bound reduces to the known Maximum Weighted Acyclic Induced Subgraph bound. We also show how to convert the capacity upper bound to transmission completion rate (broadcast rate) lower bound and provide examples of codes for certain information graphs for which the bound is either achieved of closely approximated

cs.IT↗