arXiv subjects

A. Para

Publications and source records attributed to A. Para.

64 records · Page 4Linked to original sources

arXiv2011

Longitudinal bunch monitoring at the Fermilab Tevatron and Main Injector synchrotrons

The measurement of the longitudinal behavior of the accelerated particle beams at Fermilab is crucial to the optimization and control of the beam and the maximizing of the integrated luminosity for the particle physics experiments. Longitudinal measurements in the Tevatron and Main Injector synchrotrons are based on the analysis of signals from resistive wall current monitors. This article describes the signal processing performed by a 2 GHz-bandwidth oscilloscope together with a computer running a LabVIEW program which calculates the longitudinal beam parameters.

physics.ins-det↗

arXiv2006

Beam-Based Alignment of the NuMI Target Station Components at FNAL

The Neutrinos at the Main Injector (NuMI) facility is a conventional horn-focused neutrino beam which produces muon neutrinos from a beam of mesons directed into a long evacuated decay volume. The relative alignment of the primary proton beam, target, and focusing horns affects the neutrino energy spectrum delivered to experiments. This paper describes a check of the alignment of these components using the proton beam.

physics.acc-ph↗

arXiv2006

Multi-layer scintillation detector for the MOON double beta decay experiment: Scintillation photon responses studied by a prototype detector MOON-1

An ensemble of multi-layer scintillators is discussed as an option of the high-sensitivity detector Mo Observatory Of Neutrinos (MOON) for spectroscopic measurements of neutrino-less double beta decays. A prototype detector MOON-1, which consists of 6 layer plastic-scintillator plates, was built to study the sensitivity of the MOON-type detector. The scintillation photon collection and the energy resolution, which are key elements for the high-sensitivity experiments, are found to be 1835+/-30 photo-electrons for 976 keV electrons and sigma = 2.9+/-0.1% (dE/E = 6.8+/-0.3 % in FWHM) at the Qbb ~ 3 MeV region, respectively. The multi-layer plastic-scintillator structure with good energy resolution as well as good background suppression of beta-gamma rays is crucial for the MOON-type detector to achieve the inverted hierarchy neutrino mass sensitivity.

nucl-ex↗

arXiv2006

Muon ID at the ILC

This paper describes a new way to reconstruct and identify muons with high efficiency and high pion rejection. Since muons at the ILC are often produced with or in jets, for many of the physics channels of interest[1], an efficient algorithm to deal with the identification and separation of particles within jets is important. The algorithm at the core of the method accounts for the effects of the magnetic field and for the loss of energy by charged particles due to ionization in the detector. We have chosen to develop the analysis within the setup of one of the Linear Collider Concept Detectors adopted by the US. Within b-pair production jets, particles cover a wide range in momenta; however ~ 80% of the particles have a momentum below 30 GeV[2]. Our study, focused on bbar-b jets, is preceded by a careful analysis of single energy particles between 2 and 50 GeV. As medium energy particles are a substantial component of the jets, many of the particles lose part of their energy in the calorimeters and the solenoid coil before reaching the muon detector where they may have energy below 2 GeV. To deal with this problem we have implemented a Runge-Kutta correction of the calculated trajectory to better handle these lower energy particles. The multiple scattering and other stochastic processes, more important at lower energy, is addressed by a Kalman-filter integrated into the reconstruction algorithm. The algorithm provides a unique and powerful separation of muons from pions. The 5 Tesla magnetic field from a solenoid surrounds the hadron calorimeter and allows the reconstruction and precision momentum measurement down to a few GeV.

physics.ins-det↗

arXiv2006

Muon ID- Taking Care of Lower Momenta Muons

In the Muon package under study, the tracks are extrapolated using an algorithm which accounts for the magnetic field and the ionization (dE/dx). We improved the calculation of the field dependent term to increase the muon detection efficiency at lower momenta using a Runge-Kutta method. The muon identification and hadron separation in b-bbar jets is reported with the improved software. In the same framework, the utilization of the Kalman filter is introduced. The principle of the Kalman filter is described in some detail with the propagation matrix, with the Runge-Kutta term included, and the effect on low momenta single muons particles is described.

physics.ins-det↗

arXiv2006

Improvements to the LC Muon Tracking and Identification Software

Evolution of the Muon-ID package originally written by R. Markeloff at NIU. The original method used a helical swimmer to extrapolate the tracks from the Interaction Point and to collect hits in all sub-detectors: the electromagnetic and hadronic calorimeters and the muon detector. The package was modified to replace the swimmer by a stepper which does account both for the effects of the magnetic field and for the losses by ionization in the material encountered by the particle. The Modified package shows a substantial improvement in the efficiency of muon identification. It was applied on bbar-b jets and the muon detection efficiency and purity was studied. Further improvement should be reached by accounting for stochastic processes via the utilization of the Kalman filter.

physics.ins-det↗

arXiv2006

Tests Of The Charged Particle Stepper With Muons

The muons reconstruction package for the SID/ILC detector has been extended to include the Electro-Magnetic Calorimeter. The procedure previously used to reconstruct the charged tracks, an helical fit approximation, has been replaced by a step by step analytical method accounting for the magnetic field and the energy loss by ionization. The trajectory of the muons and the impact of the method on the muon identification efficiency is analyzed. One compares the behavior of muons of different energies in the (x,y)plane and the (px,py) plane of the sub-detectors.

physics.ins-det↗

arXiv2001

Neutrino Oscillations Experiments using Off-axis NuMI Beam

NuMI neutrino beam is constructed to aim at the MINOS detector in Soudan mine. Neutrinos emitted at angles $10-20 mrad$ with respect to the beam axis create an intense beam with a well defined energy, dependent on the angle. Additional surface detectors positioned at the transverse distance of several kilometers from the mine offer an opportunity for very precise mesurements of the neutrino oscillation parameters. The mixing matrix element $|U_{e3}|^{2}$ can be measured down to a value of 0.0025 with the exposure of the order of $20 kton\times years$.

hep-ex↗

arXiv2001

Neutrino Spectrum at the Far Detector

Neutrino oscillation experiments often employ two identical detectors to minimize errors due to inadequately known neutrino beam. We examine various systematics effects related to the prediction of the neutrino spectrum in the `far' detector on the basis of the spectrum observed at the `near' detector. We propose a novel method of the derivation of the far detector spectrum. This method is less sensitive to the details of the understanding of the neutrino beam line and the hadron production spectra than the usually used `double ratio' method thus allowing to reduce the systematic errors.

hep-ex↗

arXiv2000

Neutrino Oscillation Appearance Experiment using Nuclear Emulsion and Magnetized Iron

This report describes an apparatus that could be used to measure both the identity and charge of an outgoing lepton in a charged current neutrino interaction. This capability in a massive detector would allow the most comprehensive set of neutrino oscillation physics measurements. By measuring the six observable transitions between initial and final state neutrinos, one would be able to measure all elements of the neutrino mixing matrix, as well as search for CP violation, and matter effects. If the measured matrix is not unitary, then one would also have an unambiguous determination of sterile neutrinos. Emulsion is considered as the tracking medium, and different techniques are discussed for the application of a magnetic field.

hep-ex↗