SearcharxivSearch

arXiv subjects

A. Pines

Publications and source records attributed to A. Pines.

13 recordsLinked to original sources

High contrast dual-mode optical and 13C magnetic resonance imaging in diamond particles

Multichannel imaging -- the ability to acquire images of an object through more than one imaging mode simultaneously -- has opened interesting new perspectives in areas ranging from astronomy to medicine. Visible optics and magnetic resonance imaging (MRI) offer complementary advantages of resolution, speed and depth of penetration, and as such would be attractive in combination. In this paper, we take first steps towards marrying together optical and MR imaging in a class of biocompatible particulate materials constructed out of diamond. The particles are endowed with a high density of quantum defects (Nitrogen Vacancy centers) that under optical excitation fluoresce brightly in the visible, but also concurrently electron spin polarize. This allows the hyperpolarization of lattice 13C nuclei to make the particles over three-orders of magnitude brighter than in conventional MRI. Dual-mode optical and MR imaging permits immediate access to improvements in resolution and signal-to-noise especially in scattering environments. We highlight additional benefits in background-free imaging, demonstrating lock-in suppression by factors of 2 and 5 in optical and MR domains respectively. Ultimate limits could approach as much as two orders of magnitude in each domain. Finally, leveraging the ability of optical and MR imaging to simultaneously probe Fourier-reciprocal domains (real and k-space), we elucidate the ability to employ hybrid sub-sampling in both conjugate spaces to vastly accelerate dual-image acquisition, by as much as two orders of magnitude in practically relevant sparse-imaging scenarios. This is accompanied by a reduction in optical power by the same factor. Our work suggests interesting possibilities for the simultaneous optical and low-field MR imaging of targeted diamond nanoparticles.

physics.ins-det

Dynamical decoupling in interacting systems: applications to signal-enhanced hyperpolarized readout

Methods that preserve coherence broadly impact all quantum information processing and metrology applications. Dynamical decoupling methods accomplish this by protecting qubits in noisy environments but are typically constrained to the limit where the qubits themselves are non-interacting. Here we consider the alternate regime wherein the inter-qubit couplings are of the same order as dephasing interactions with the environment. We propose and demonstrate a multi-pulse protocol that protects transverse spin states by suitably Hamiltonian engineering the inter-spin coupling while simultaneously suppressing dephasing noise on the qubits. We benchmark the method on 13C nuclear spin qubits in diamond, dipolar coupled to each other and embedded in a noisy electronic spin bath, and hyperpolarized via optically pumped NV centers. We observe effective state lifetimes of 13C nuclei $T_2^{\prime}\approx$2.5s at room temperature, an extension of over 4700-fold over the conventional $T_2^{\ast}$ free induction decay. The spins are continuously interrogated during the applied quantum control, resulting in 13C NMR line narrowing and an $>$500-fold boost in SNR due to the lifetime extension. Together with hyperpolarization spin interrogation is accelerated by $>10^{11}$ over conventional 7T NMR. This work suggests strategies for the dynamical decoupling of coupled qubit systems with applications in a variety of experimental platforms.

quant-ph

High temperature annealing enhanced diamond 13C hyperpolarization at room temperature

Methods of optical dynamic nuclear polarization (DNP) open the door to the replenishable hyperpolarization of nuclear spins, boosting their NMR/MRI signature by orders of magnitude. Nanodiamond powder rich in negatively charged Nitrogen Vacancy (NV) defect centers has recently emerged as one such promising platform, wherein 13C nuclei can be hyperpolarized through the optically pumped defects completely at room temperature and at low magnetic fields. Given the compelling possibility of relaying this 13C polarization to nuclei in external liquids, there is an urgent need for the engineered production of highly "hyperpolarizable" diamond particles. In this paper, we report on a systematic study of various material dimensions affecting optical 13C hyperpolarization in diamond particles -- especially electron irradiation and annealing conditions that drive NV center formation. We discover surprisingly that diamond annealing at elevated temperatures close to 1720C have remarkable effects on the hyperpolarization levels, enhancing them by upto 36-fold over materials annealed through conventional means. We unravel the intriguing material origins of these gains, and demonstrate they arise from a simultaneous improvement in NV electron relaxation time and coherence time, as well as the reduction of paramagnetic content, and an increase in 13C relaxation lifetimes. Overall this points to significant recovery of the diamond lattice from radiation damage as a result of the high-temperature annealing. Our work suggests methods for the guided materials production of fluorescent, 13C hyperpolarized, nanodiamonds and pathways for their use as multi-modal (optical and MRI) imaging and hyperpolarization agents.

physics.app-ph

13C dynamic nuclear polarization in diamond via a microwave-free 'integrated' cross effect

Color-center-hosting semiconductors are emerging as promising source materials for low-field dynamic nuclear polarization (DNP) at or near room temperature, but hyperfine broadening, susceptibility to magnetic field heterogeneity, and nuclear spin relaxation induced by other paramagnetic defects set practical constraints difficult to circumvent. Here, we explore an alternate route to color-center-assisted DNP using nitrogen-vacancy (NV) centers in diamond coupled to substitutional nitrogen impurities, the so-called P1 centers. Working near the level anti-crossing condition - where the P1 Zeeman splitting matches one of the NV spin transitions - we demonstrate efficient microwave-free 13C DNP through the use of consecutive magnetic field sweeps and continuous optical excitation. The amplitude and sign of the polarization can be controlled by adjusting the low-to-high and high-to-low magnetic field sweep rates in each cycle so that one is much faster than the other. By comparing the 13C DNP response for different crystal orientations, we show that the process is robust to magnetic field/NV misalignment, a feature that makes the present technique suitable to diamond powders and settings where the field is heterogeneous. Applications to shallow NVs could capitalize on the greater physical proximity between surface paramagnetic defects and outer nuclei to efficiently polarize target samples in contact with the diamond crystal.

quant-ph

Wide dynamic range magnetic field cycler: Harnessing quantum control at low and high fields

We describe the construction of a fast field cycling device capable of sweeping a 4-order-of-magnitude range of magnetic fields, from ~1mT to 7T, in under 700ms. Central to this system is a high-speed sample shuttling mechanism between a superconducting magnet and a magnetic shield, with the capability to access arbitrary fields in between with high resolution. Our instrument serves as a versatile platform to harness the inherent dichotomy of spin dynamics on offer at low and high fields - in particular, the low anisotropy, fast spin manipulation, and rapid entanglement growth at low field as well as the long spin lifetimes, spin specific control, and efficient inductive measurement possible at high fields. Exploiting these complementary capabilities in a single device open up applications in a host of problems in quantum control, sensing, and information storage, besides in nuclear hypepolarization, relaxometry and imaging. In particular, in this paper, we focus on the ability of the device to enable low-field hyperpolarization of 13C nuclei in diamond via optically pumped electronic spins associated with Nitrogen Vacancy (NV) defect centers.

quant-ph

Enhanced dynamic nuclear polarization via swept microwave frequency combs

Dynamic Nuclear Polarization (DNP) has enabled enormous gains in magnetic resonance signals and led to vastly accelerated NMR/MRI imaging and spectroscopy. Unlike conventional cw-techniques, DNP methods that exploit the full electron spectrum are appealing since they allow direct participation of all electrons in the hyperpolarization process. Such methods typically entail sweeps of microwave radiation over the broad electron linewidth to excite DNP, but are often inefficient because the sweeps, constrained by adiabaticity requirements, are slow. In this paper we develop a technique to overcome the DNP bottlenecks set by the slow sweeps, employing a swept microwave frequency comb that increases the effective number of polarization transfer events while respecting adiabaticity constraints. This allows a multiplicative gain in DNP enhancement, scaling with the number of comb frequencies and limited only by the hyperfine-mediated electron linewidth. We demonstrate the technique for the optical hyperpolarization of 13C nuclei in powdered microdiamonds at low fields, increasing the DNP enhancement from 30 to 100 measured with respect to the thermal signal at 7T. For low concentrations of broad linewidth electron radicals, e.g. TEMPO, these multiplicative gains could exceed an order of magnitude.

physics.app-ph

Orientation independent room-temperature optical 13C hyperpolarization in powdered diamond

Dynamic nuclear polarization via contact with electronic spins has emerged as an attractive route to enhance the sensitivity of nuclear magnetic resonance (NMR) beyond the traditional limits imposed by magnetic field strength and temperature. Among the various alternative implementations, the use of nitrogen vacancy (NV) centers in diamond - a paramagnetic point defect whose spin can be optically polarized at room temperature - has attracted widespread attention, but applications have been hampered by the need to align the NV axis with the external magnetic field. Here we overcome this hurdle through the combined use of continuous optical illumination and a microwave sweep over a broad frequency range. As a proof of principle, we demonstrate our approach using powdered diamond where we attain bulk 13C spin polarization in excess of 0.25 percent under ambient conditions. Remarkably, our technique acts efficiently on diamond crystals of all orientations, and polarizes nuclear spins with a sign that depends exclusively on the direction of the microwave sweep. Our work paves the way towards the use of hyperpolarized diamond particles as imaging contrast agents for biosensing and, ultimately, for the hyperpolarization of nuclear spins in arbitrary liquids brought in contact with their surface.

physics.app-ph

Optically detected magnetic resonance of nitrogen vacancies in a diamond anvil cell using designer diamond anvils

Optically detected magnetic resonance of nitrogen vacancy centers in diamond offers novel routes to both DC and AC magnetometry in diamond anvil cells under high pressures ($>3$ GPa). However, a serious challenge to realizing experiments has been the insertion of microwave radiation in to the sample space without screening by the gasket material. We utilize designer anvils with lithographically-deposited metallic microchannels on the diamond culet as a microwave antenna. We detected the spin resonance of an ensemble of microdiamonds under pressure, and measure the pressure dependence of the zero field splitting parameters. These experiments enable the possibility for all-optical magnetic resonance experiments on sub-$μ$L sample volumes at high pressures.

physics.ins-det

Investigation of Anti-Relaxation Coatings for Alkali-Metal Vapor Cells Using Surface Science Techniques

Many technologies based on cells containing alkali-metal atomic vapor benefit from the use of anti-relaxation surface coatings in order to preserve atomic spin polarization. In particular, paraffin has been used for this purpose for several decades and has been demonstrated to allow an atom to experience up to 10,000 collisions with the walls of its container without depolarizing, but the details of its operation remain poorly understood. We apply modern surface and bulk techniques to the study of paraffin coatings, in order to characterize the properties that enable the effective preservation of alkali spin polarization. These methods include Fourier transform infrared spectroscopy, differential scanning calorimetry, atomic force microscopy, near-edge X-ray absorption fine structure spectroscopy, and X-ray photoelectron spectroscopy. We also compare the light-induced atomic desorption yields of several different paraffin materials. Experimental results include the determination that crystallinity of the coating material is unnecessary, and the detection of C=C double bonds present within a particular class of effective paraffin coatings. Further study should lead to the development of more robust paraffin anti-relaxation coatings, as well as the design and synthesis of new classes of coating materials.

physics.chem-ph

Optical detection of NMR J-spectra at zero magnetic field

Scalar couplings of the form J I_1 \cdot I_2 between nuclei impart valuable information about molecular structure to nuclear magnetic-resonance spectra. Here we demonstrate direct detection of J-spectra due to both heteronuclear and homonuclear J-coupling in a zero-field environment where the Zeeman interaction is completely absent. We show that characteristic functional groups exhibit distinct spectra with straightforward interpretation for chemical identification. Detection is performed with a microfabricated optical atomic magnetometer, providing high sensitivity to samples of microliter volumes. We obtain 0.1 Hz linewidths and measure scalar-coupling parameters with 4-mHz statistical uncertainty. We anticipate that the technique described here will provide a new modality for high-precision "J spectroscopy" using small samples on microchip devices for multiplexed screening, assaying, and sample identification in chemistry and biomedicine.

physics.atom-ph

Detection of nuclear magnetic resonance with an anisotropic magnetoresistive sensor

We report detection of nuclear magnetic resonance (NMR) using an anisotropic magnetoresistive (AMR) sensor. A ``remote-detection'' arrangement was used, in which protons in flowing water were pre-polarized in the field of a superconducting NMR magnet, adiabatically inverted, and subsequently detected with an AMR sensor situated downstream from the magnet and the adiabatic inverter. AMR sensing is well suited for NMR detection in microfluidic ``lab-on-a-chip'' applications.

physics.chem-ph

Application of atomic magnetometry in magnetic particle detection

We demonstrate the detection of magnetic particles carried by water in a continuous flow using an atomic magnetic gradiometer. Studies on three types of magnetic particles are presented: a single cobalt particle (diameter ~150 um, multi-domain), a suspension of superparamagnetic magnetite particles (diameter \~1 um), and ferromagnetic cobalt nanoparticles (diameter ~10 nm, 120 kA/m magnetization). Estimated detection limits are 20 um diameter for a single cobalt particle at a water flow rate 30 ml/min, 5x10^3 magnetite particles at 160 ml/min, and 50 pl for the specific ferromagnetic fluid at 130 ml/min. Possible applications of our method are discussed.

physics.ins-det

Hyperpolarized xenon nuclear spins detected by optical atomic magnetometry

We report the use of an atomic magnetometer based on nonlinear magneto-optical rotation with frequency modulated light (FM NMOR) to detect nuclear magnetization of xenon gas. The magnetization of a spin-exchange-polarized xenon sample ($1.7 $cm$^3$ at a pressure of $5 $bar, natural isotopic abundance, polarization 1%), prepared remotely to the detection apparatus, is measured with an atomic sensor (which is insensitive to the leading field of 0.45 G applied to the sample; an independent bias field at the sensor is $140 μ$G). An average magnetic field of $\sim 10 $nG induced by the xenon sample on the 10-cm diameter atomic sensor is detected with signal-to-noise ratio $\sim 10$, limited by residual noise in the magnetic environment. The possibility of using modern atomic magnetometers as detectors of nuclear magnetic resonance and in magnetic resonance imaging is discussed. Atomic magnetometers appear to be ideally suited for emerging low-field and remote-detection magnetic resonance applications.

physics.atom-ph