SearcharxivSearch

arXiv subjects

A. Ribon

Publications and source records attributed to A. Ribon.

At least 19 recordsLinked to original sources

Production of charmed particles in proton-proton and light nucleus-nucleus interactions in Geant4 FTF model

The total yield of neutral D-mesons (4$\pi$) in central Xe+La interactions at 150 GeV per nucleon has been calculated within the Geant4 FTF model. Our calculation is close to predictions of Monte Carlo models that do not account for quark-gluon plasma formation. As the predictions, our calculation substantially underestimates preliminary experimental data. The experimental data indicate enhanced charmed particle production in nucleus-nucleus interactions. We present also our calculations for charmed meson production in ${\rm p+p}$, ${\rm d+d}$ and ${\rm ^4He+^4He}$ interactions for future NICA/SPD experiment at $\sqrt{s_{NN}}=$10 and 20 GeV.

hep-ph

Exposing a fibre-based dual-readout calorimeter to a positron beam

A prototype of a dual-readout calorimeter using brass capillary tubes surrounding scintillating and clear plastic optical fibres was tested using beams of particles with energies between 10 and 100 GeV produced by the CERN SPS. The scope of the test was to characterise the performance of the tube-based detector response to positrons in terms of linearity, energy resolution, and lateral granularity. After calibrating the detector and processing the output signal to correct for the energy dependency on the particle impact point, the linearity of the measurement was found to be better than 1\%. The positron response was compared to that predicted by a Geant4-based simulation, finding good agreement both in terms of energy resolution and shower profile. The detector resolution was estimated to be well described by a stochastic term of 14.5\% with a negligible constant term.

physics.ins-det

Description and stability of a RPC-based calorimeter in electromagnetic and hadronic shower environments

The CALICE Semi-Digital Hadron Calorimeter technological prototype completed in 2011 is a sampling calorimeter using Glass Resistive Plate Chamber (GRPC) detectors as the active medium. This technology is one of the two options proposed for the hadron calorimeter of the International Large Detector for the International Linear Collider. The prototype was exposed in 2015 to beams of muons, electrons, and pions of different energies at the CERN Super Proton Synchrotron. The use of this technology for future experiments requires a reliable simulation of its response that can predict its performance. GEANT4 combined with a digitization algorithm was used to simulate the prototype. It describes the full path of the signal: showering, gas avalanches, charge induction, and hit triggering. The simulation was tuned using muon tracks and electromagnetic showers for accounting for detector inhomogeneity and tested on hadronic showers collected in the test beam. This publication describes developments of the digitization algorithm. It is used to predict the stability of the detector performance against various changes in the data-taking conditions, including temperature, pressure, magnetic field, GRPC width variations, and gas mixture variations. These predictions are confronted with test beam data and provide an attempt to explain the detector properties. The data-taking conditions such as temperature and potential detector inhomogeneities affect energy density measurements but have a small impact on detector efficiency.

physics.ins-det

Simulation of charmed particle production in Geant4

It is expected that charmed particles will be copiously produced at Future Circular Collider (FCC). Due to relatively large life-time of the particles, it will be needed to account their interactions with surrounded materials and detector's materials. In order to satisfy the requirements, charmed particle production in soft interactions has been implemented in QGS and FTF models of the Geant4 package. Some details of the implementations are considered in the paper.

hep-ph

Offloading electromagnetic shower transport to GPUs

Making general particle transport simulation for high-energy physics (HEP) single-instruction-multiple-thread (SIMT) friendly, to take advantage of accelerator hardware, is an important alternative for boosting the throughput of simulation applications. To date, this challenge is not yet resolved, due to difficulties in mapping the complexity of Geant4 components and workflow to the massive parallelism features exposed by graphics processing units (GPU). The AdePT project is one of the R\&D initiatives tackling this limitation and exploring GPUs as potential accelerators for offloading some part of the CPU simulation workload. Our main target is to implement a complete electromagnetic shower demonstrator working on the GPU. The project is the first to create a full prototype of a realistic electron, positron, and gamma electromagnetic shower simulation on GPU, implemented as either a standalone application or as an extension of the standard Geant4 CPU workflow. Our prototype currently provides a platform to explore many optimisations and different approaches. We present the most recent results and initial conclusions of our work, using both a standalone GPU performance analysis and a first implementation of a hybrid workflow based on Geant4 on the CPU and AdePT on the GPU.

hep-ex

Geant4 FTF model description of the latest data by the NA61/SHINE collaboration on ${\rm ^{40}Ar+{}^{45}Sc}$ interactions

It is shown that the Geant4 FTF model, which does not include the simulation of the hard parton-parton scattering and the formation of the quark-gluon plasma (QGP), describes well the NA61/SHINE data on $π^-$ meson distributions for the interactions at $\sqrt{s_{NN}}=$ 5.2, 6.1, 7.6 and 8.8 GeV. At higher energies, $\sqrt{s_{NN}}=$ 11.9 and 16.8 GeV, the model underestimates the data. This is considered as an indication of the formation of QGP at higher energies in central collisions of light and intermediate nuclei than in collisions of heavy nuclei ($\sqrt{s_{NN}}\sim 6$ GeV).

hep-ph

GeantV: Results from the prototype of concurrent vector particle transport simulation in HEP

Full detector simulation was among the largest CPU consumer in all CERN experiment software stacks for the first two runs of the Large Hadron Collider (LHC). In the early 2010's, the projections were that simulation demands would scale linearly with luminosity increase, compensated only partially by an increase of computing resources. The extension of fast simulation approaches to more use cases, covering a larger fraction of the simulation budget, is only part of the solution due to intrinsic precision limitations. The remainder corresponds to speeding-up the simulation software by several factors, which is out of reach using simple optimizations on the current code base. In this context, the GeantV R&D project was launched, aiming to redesign the legacy particle transport codes in order to make them benefit from fine-grained parallelism features such as vectorization, but also from increased code and data locality. This paper presents extensively the results and achievements of this R&D, as well as the conclusions and lessons learnt from the beta prototype.

physics.comp-ph

GEANT4 Parameter Tuning Using Professor

The Geant4 toolkit is used extensively in high energy physics to simulate the passage of particles through matter and to predict effects such as detector efficiencies and smearing. Geant4 uses many underlying models to predict particle interaction kinematics, and uncertainty in these models leads to uncertainty in high energy physics measurements. The Geant4 collaboration recently made free parameters in some models accessible through partnership with Geant4 developers. We present a study of the impact of varying parameters in three Geant4 hadronic physics models on agreement with thin target datasets and describe fits to these datasets using the Professor model tuning framework. We find that varying parameters produces substantially better agreement with some datasets, but that more degrees of freedom are required for full agreement. This work is a first step towards a common framework for propagating uncertainties in Geant4 models to high energy physics measurements, and we outline future work required to complete that goal.

physics.ins-det

Analysis of Testbeam Data of the Highly Granular RPC-Steel CALICE Digital Hadron Calorimeter and Validation of Geant4 Monte Carlo Models

We present a study of the response of the highly granular Digital Hadronic Calorimeter with steel absorbers, the Fe-DHCAL, to positrons, muons, and pions with momenta ranging from 2 to 60 GeV/c. Developed in the context of the CALICE collaboration, this hadron calorimeter utilises Resistive Plate Chambers as active media, interspersed with steel absorber plates. With a transverse granularity of $1\,\times\,1\,$cm$^{2}$ and a longitudinal segmentation of 38 layers, the calorimeter counted 350,208 readout channels, each read out with single-bit resolution (digital readout). The data were recorded in the Fermilab test beam in 2010-11. The analysis includes measurements of the calorimeter response and the energy resolution to positrons and muons, as well as detailed studies of various shower shape quantities. The results are compared to simulations based on Geant4, which utilise different electromagnetic and hadronic physics lists.

physics.ins-det

Simulation of neutron production in hadron-nucleus and nucleus-nucleus interactions in Geant4

Studying experimental data obtained at ITEP [1] on neutron production in interactions of protons with various nuclei in the energy range from 747 MeV up to 8.1 GeV, we have found that slow neutron spectra have scaling and asymptotic properties [2]. The spectra weakly depend on the collision energy at momenta of projectile protons larger than 5 - 6 GeV/c. These properties are taken into account in the Geant4 Fritiof (FTF) model. The improved FTF model describes as well as the Geant4 Bertini model the experimental data on neutron production by 1.2 GeV and 1.6 GeV protons on targets (Fe, Pb) [3] and by 3.0 GeV protons on various targets (Al, Fe, Pb) [4]. For neutron production in antiproton-nucleus interactions, it was demonstrated that the FTF results are in a satisfactory agreement with experimental data of the LEAR collaboration [5]. The FTF model gives promising results for neutron production in nucleus - nucleus interactions at projectile energy 1 - 2 GeV per nucleon [6]. The observed properties allow one to predict neutron yields in the nucleus-nucleus interactions at high and very high energies. Predictions for the NICA/MPD experiment at JINR are presented.

hep-ph

Production of strange particles in hadronic interactions

The NA61/SHINE collaboration has recently published high precision data on production of $π^\pm$ and $K^\pm$ mesons, protons, antiprotons and $Λ$ hyperons in ${\rm pp}$ interactions at 20, 31, 40, 80 and 158 GeV/c, and in ${\rm pC}$ interactions at 31 GeV/c. The collaboration also presented experimental data on production of particles - $π^\pm$, $K^\pm$, $p^\pm$, $ρ^0$, $ω$ and $K^{*0}$ in $π^-{\rm C}$ collisions at 158 and 350 GeV/c. The collaboration has compared these data with various Monte Carlo model calculations: UrQMD, EPOS, GiBUU, and others. All of the models have various problems. The latest version of the FTF (Fritiof) model of Geant4 solves most of these problems. In the FTF model, we have improved the fragmentation of quark-gluon strings with small masses and introduced dependencies of probabilities of strange mesons and baryon-antibaryon pair's creation on string masses. Due to these changes, we describe the data of the NA61/SHINE collaboration on particle production in ${\rm pp, pC}$, and $π^-{\rm C}$ interactions. The improved Geant4 FTF model also well reproduces experimental data on inclusive cross sections of $Λ, \barΛ$ and $K^{0}$ production in antiproton-proton interactions at various energies. The modified FTF model allows one to simulate realistic processes with two particle productions - $\bar{p}p \rightarrow Λ\barΛ$, $\bar{p}p \rightarrow K^{+} K^{-}$, $\bar{p}p \rightarrow Λ\barΣ$, and $\bar{p}p \rightarrowΣ\barΣ$, which will be studied in the future by the PANDA experiment at FAIR (GSI, Germany).

hep-ph

Hadronic Energy Resolution of a Combined High Granularity Scintillator Calorimeter System

This paper presents results obtained with the combined CALICE Scintillator Electromagnetic Calorimeter, Analogue Hadronic Calorimeter and Tail Catcher & Muon Tracker, three high granularity scintillator-SiPM calorimeter prototypes. The response of the system to pions with momenta between 4 GeV/c and 32 GeV/c is analysed, including the energy response, resolution, and longitudinal shower profiles. The results of a software compensation technique based on weighting according to hit energy are compared to those of a standard linear energy reconstruction. The results are compared to predictions of the GEANT4 physics lists QGSP_BERT_HP and FTFP_BERT_HP.

physics.ins-det

Dynamics of Anti-Proton -- Protons and Anti-Proton -- Nucleus Reactions

A short review of simulation results of anti-proton-proton and anti-proton-nucleus interactions within the framework of Geant4 FTF (Fritiof) model is presented. The model uses the main assumptions of the Quark-Gluon-String Model or Dual Parton Model. The model assumes production and fragmentation of quark-anti-quark and diquark-anti-diquark strings in the mentioned interactions. Key ingredients of the model are cross sections of string creation processes and an usage of the LUND string fragmentation algorithm. They allow one to satisfactory describe a large set of experimental data, especially, a strange particle production, Lambda hyperons and K mesons.

nucl-th

Resistive Plate Chamber Digitization in a Hadronic Shower Environment

The CALICE Semi-Digital Hadron Calorimeter (SDHCAL) technological prototype is a sampling calorimeter using Glass Resistive Plate Chamber detectors with a three-threshold readout as the active medium. This technology is one of the two options proposed for the hadron calorimeter of the International Large Detector for the International Linear Collider. The prototype was exposed to beams of muons, electrons and pions of different energies at the CERN Super Proton Synchrotron. To be able to study the performance of such a calorimeter in future experiments it is important to ensure reliable simulation of its response. In this paper we present our prototype simulation performed with GEANT4 and the digitization procedure achieved with an algorithm called SimDigital. A detailed description of this algorithm is given and the methods to determinate its parameters using muon tracks and electromagnetic showers are explained. The comparison with hadronic shower data shows a good agreement up to 50 GeV. Discrepancies are observed at higher energies. The reasons for these differences are investigated.

physics.ins-det

Hadron shower decomposition in the highly granular CALICE analogue hadron calorimeter

The spatial development of hadronic showers in the CALICE scintillator-steel analogue hadron calorimeter is studied using test beam data collected at CERN and FNAL for single positive pions and protons with initial momenta in the range from 10 to 80 GeV/c. Both longitudinal and radial development of hadron showers are parametrised with two-component functions. The parametrisation is fit to test beam data and simulations using the QGSP_BERT and FTFP_BERT physics lists from Geant4 version 9.6. The parameters extracted from data and simulated samples are compared for the two types of hadrons. The response to pions and the ratio of the non-electromagnetic to the electromagnetic calorimeter response, h/e, are estimated using the extrapolation and decomposition of the longitudinal profiles.

physics.ins-det

Shower development of particles with momenta from 15 GeV to 150 GeV in the CALICE scintillator-tungsten hadronic calorimeter

We present a study of showers initiated by electrons, pions, kaons, and protons with momenta from 15 GeV to 150 GeV in the highly granular CALICE scintillator-tungsten analogue hadronic calorimeter. The data were recorded at the CERN Super Proton Synchrotron in 2011. The analysis includes measurements of the calorimeter response to each particle type as well as measurements of the energy resolution and studies of the longitudinal and radial shower development for selected particles. The results are compared to Geant4 simulations (version 9.6.p02). In the study of the energy resolution we include previously published data with beam momenta from 1 GeV to 10 GeV recorded at the CERN Proton Synchrotron in 2010.

physics.ins-det

Testing Hadronic Interaction Models using a Highly Granular Silicon-Tungsten Calorimeter

A detailed study of hadronic interactions is presented using data recorded with the highly granular CALICE silicon-tungsten electromagnetic calorimeter. Approximately 350,000 selected negatively charged pion events at energies between 2 and 10 GeV have been studied. The predictions of several physics models available within the Geant4 simulation tool kit are compared to this data. A reasonable overall description of the data is observed; the Monte Carlo predictions are within 20% of the data, and for many observables much closer. The largest quantitative discrepancies are found in the longitudinal and transverse distributions of reconstructed energy.

physics.ins-det

Pion and proton showers in the CALICE scintillator-steel analogue hadron calorimeter

Showers produced by positive hadrons in the highly granular CALICE scintillator-steel analogue hadron calorimeter were studied. The experimental data were collected at CERN and FNAL for single particles with initial momenta from 10 to 80 GeV/c. The calorimeter response and resolution and spatial characteristics of shower development for proton- and pion-induced showers for test beam data and simulations using Geant4 version 9.6 are compared.

physics.ins-det