arXiv subjects

A. Rivera

Publications and source records attributed to A. Rivera.

13 recordsLinked to original sources

arXiv2025

Effect of the repulsion between twin granular impactors on crater's aspect ratio: preliminary findings

We study the role of repulsive granular interactions between identical intruders as they impact a granular bed. We demonstrate experimentally that repulsion does have a measurable effect in the aspect ratio of binary craters. Furthermore, we show that the protocol followed for the preparation of the granular bed plays a crucial role in the output of table-top experiments on doublet craters.

cond-mat.soft↗

arXiv2025

Structural and optical changes induced by incorporation of antimony into InAs/GaAs(001) quantum dots

We present experimental evidence of Sb incorporation inside InAs/GaA(001) quantum dots exposed to an antimony flux immediately before capping with GaAs. The Sb composition profile inside the nanostructures as measured by cross-sectional scanning tunneling and electron transmission microscopies show two differentiated regions within the quantum dots, with an Sb rich alloy at the tip of the quantum dots. Atomic force microscopy and transmission electron microscopy micrographs show increased quantum-dot height with Sb flux exposure. The evolution of the reflection high-energy electron-diffraction pattern suggests that the increased height is due to changes in the quantum-dot capping process related to the presence of segregated Sb atoms. These structural and compositional changes result in a shift of the room-temperature photoluminescence emission from 1.26 to 1.36 microns accompanied by an order of magnitude increase in the room-temperature quantum-dot luminescence intensity.

cond-mat.mtrl-sci↗

arXiv2024

Plasma-wall interaction in laser inertial fusion reactors: novel proposals for radiation tests of first wall materials

Dry-wall laser inertial fusion (LIF) chambers will have to withstand strong bursts of fast charged particles which will deposit tens of kJ m$^{-2}$ and implant more than 10$^{18}$ particles m$^{-2}$ in a few microseconds at a repetition rate of some Hz. Large chamber dimensions and resistant plasma-facing materials must be combined to guarantee the chamber performance as long as possible under the expected threats: heating, fatigue, cracking, formation of defects, retention of light species, swelling and erosion. Current and novel radiation resistant materials for the first wall need to be validated under realistic conditions. However, at present there is a lack of facilities which can reproduce such ion environments. This contribution proposes the use of ultra-intense lasers and high-intense pulsed ion beams (HIPIB) to recreate the plasma conditions in LIF reactors. By target normal sheath acceleration, ultra-intense lasers can generate very short and energetic ion pulses with a spectral distribution similar to that of the inertial fusion ion bursts, suitable to validate fusion materials and to investigate the barely known propagation of those bursts through background plasmas/gases present in the reactor chamber. HIPIB technologies, initially developed for inertial fusion driver systems, provide huge intensity pulses which meet the irradiation conditions expected in the first wall of LIF chambers and thus can be used for the validation of materials too.

physics.plasm-ph↗

arXiv2024

Silica final lens performance in laser fusion facilities: HiPER and LIFE

Nowadays, the projects LIFE (Laser Inertial Fusion Energy) in USA and HiPER (High Power Laser Energy Research) in Europe are the most advanced ones to demonstrate laser fusion energy viability. One of the main points of concern to properly achieve ignition is the performance of the final optics (lenses) under the severe irradiation conditions that take place in fusion facilities. In this paper, we calculate the radiation fluxes and doses as well as the radiation-induced temperature enhancement and colour centre formation in final lenses assuming realistic geometrical configurations for HiPER and LIFE. On these bases, the mechanical stresses generated by the established temperature gradients are evaluated showing that from a mechanical point of view lenses only fulfill specifications if ions resulting from the imploding target are mitigated. The absorption coefficient of the lenses is calculated during reactor startup and steady-state operation. The obtained results evidence the necessity of new solutions to tackle ignition problems during the startup process for HiPER. Finally, we evaluated the effect of temperature gradients on focal length changes and lens surface deformations. In summary, we discuss the capabilities and weak points of silica lenses and propose alternatives to overcome predictable problems.

physics.optics↗

arXiv2024

Materials research for hiper laser fusion facilities: chamber wall, structural material and final optics

The European HiPER project aims to demonstrate commercial viability of inertial fusion energy within the following two decades. This goal requires an extensive Research & Development program on materials for different applications (e.g., first wall, structural components and final optics). In this paper we will discuss our activities in the framework of HiPER to develop materials studies for the different areas of interest. The chamber first wall will have to withstand explosions of at least 100 MJ at a repetition rate of 5-10 Hz. If direct drive targets are used, a dry wall chamber operated in vacuum is preferable. In this situation the major threat for the wall stems from ions. For reasonably low chamber radius (5-10 m) new materials based on W and C are being investigated, e.g., engineered surfaces and nanostructured materials. Structural materials will be subject to high fluxes of neutrons leading to deleterious effects, such as, swelling. Low activation advanced steels as well as new nanostructured materials are being investigated. The final optics lenses will not survive the extreme ion irradiation pulses originated in the explosions. Therefore, mitigation strategies are being investigated. In addition, efforts are being carried out in understanding optimized conditions to minimize the loss of optical properties by neutron and gamma irradiation.

physics.ins-det↗

arXiv2022

Cuban natural palygorskite nanoclays for the removal of sulfamethoxazole from aqueous solutions

Water pollution with pharmaceutical and personal care products has become a serious environmental. A reasonable strategy to mitigate the problem involves absorbent materials. In particular, the use of natural clays is an advantageous alternative considering their high adsorption capacity and compatibility with the environment. In the present work, the efficacy of a Cuban natural clay (palygorskite, Pal) as support of sulfamethoxazole (SMX), an antibiotic considered an emerging contaminant (EC), was evaluated. The amount of SMX incorporated onto clay was determined by UV spectroscopy. The resulting composite material was characterized by infrared spectroscopy (IR), X-ray diffraction (XRD), thermogravimetric analysis (TG/DTG), zeta potential (ZP), nitrogen adsorption measurements and transmission electron microscopy (TEM). The drug desorption studies in aqueous solution indicated the reversibility of the incorporation process, suggesting the potential use of the Pal nanoclay as an effective support of SMX and hence, a good prospect for water decontamination.

physics.chem-ph↗

arXiv2021

Protecting others vs. protecting yourself against ballistic droplets: Quantification by stain patterns

It is often accepted a priori that a face mask worn by an infected subject is effective to avoid the spreading of a respiratory disease, while a healthy person is not necessarily well protected when wearing the mask. Using a frugal stain technique, we quantify the ballistic droplets reaching a receptor from a jet-emitting source which mimics a coughing, sneezing or talking human: in real life, such droplets may host active SARS-CoV-2 virus able to replicate in the nasopharynx. We demonstrate that materials often used in home-made face masks block most of the droplets. We also show quantitatively that less liquid carried by ballistic droplets reaches a receptor when a blocking material is deployed near the source than when located near the receptor, which supports the paradigm that your face mask does protect you, but protects others even better than you.

physics.med-ph↗

arXiv2019

Stability of a natural palygorskite after a cycle of adsorption-desorption of an emerging pollutant

In this paper, we evaluate the structural stability of a natural Cuban clay (an adsorbent of organic pollutants) after an adsorption-desorption process. The clay under study was palygorskite, and sulfamethoxazole was the emerging contaminant. The materials were characterized by X-ray diffraction, attenuated total reflection infrared spectroscopy and zeta potential before and after the sulfamethoxazole adsorption-desorption processes. Based on the material integrity, the potentiality of Pal as pollutant adsorbent and its possible reuse in adsorption-desorption cycles was demonstrated.

physics.app-ph↗

arXiv2019

Log-normal Superstatistics Reveals Statistical Resilience in the Panic Response of Confined Ants

We report the emergence of Log-normal Superstatistics in the collective motion of ants confined in a quasi-2D arena and exposed to a panic-inducing stimulus. A data-driven superstatistical Langevin model accurately reproduces the transition from stationary behavior to an organized escape response, characterized by non-Gaussian velocity distributions and a stochastic diffusion coefficient. Our findings show that danger information propagates via a memory-limited, cascade-like mechanism, resulting in a stable cluster formation despite individual memory constraints. These results indicate that a slowly varying diffusivity arises from the multiplicative combination of interaction-mediated processes under confinement, leading naturally to Log-normal fluctuations. The persistence of this statistical structure under panic reveals a form of collective resilience, establishing a mechanistic bridge between Superstatistics and living active matter in confined environments.

q-bio.PE↗

arXiv2013

Strain driven migration of In during the growth of InAs/GaAs quantum posts

Using the mechano-optical stress sensor technique, we observe a counter-intuitive reduction of the compressive stress when InAs is deposited on GaAs (001) during growth of quantum posts. Through modelling of the strain fields, we find that such anomalous behaviour can be related to the strain-driven detachment of In atoms from the crystal and their surface diffusion towards the self-assembled nanostructures.

cond-mat.mtrl-sci↗

arXiv2011

Shower approach in the simulation of ion scattering from solids

An efficient approach for the simulation of ion scattering from solids is proposed. For every encountered atom, we take multiple samples of its thermal displacements among those which result in scattering with high probability to finally reach the detector. As a result, the detector is illuminated by intensive "showers", where each event of detection must be weighted according to the actual probability of the atom displacement. The computational cost of such simulation is orders of magnitude lower than in the direct approach and a comprehensive analysis of multiple and plural scattering effects becomes possible. We use the new method for two purposes. First, the accuracy of the approximate approaches, developed mainly for ion-beam structural analysis, is verified. Second, the possibility to reproduce a wide class of experimental conditions is used to analyze some basic features of ion-solid collisions: the role of double violent collisions in low-energy ion scattering; the origin of the "surface peak" in scattering from amorphous samples; the low-energy tail in the energy spectra of scattered medium-energy ions due to plural scattering; the degradation of blocking patterns in 2D angular distributions with increasing depth of scattering. As an example of simulation for ions of MeV energies, we verify the time-reversibility for channeling/blocking of 1 MeV protons in a W crystal. The possibilities of analysis that our approach offers may be very useful for various applications in particular for structural analysis with atomic resolution.

cond-mat.mtrl-sci↗

arXiv2011

In-situ accumulated stress measurements: application to strain balanced quantum dots and quantum posts

In this work we use the in-situ accumulated stress monitoring technique to evaluate the evolution of the stress during the strain balancing of InAs/GaAs quantum dots and quantum posts. The comparison of these results with simulations and other strain balanced criteria commonly used indicate that it is necessary to consider the kinematics of the process, not only the nominal values for the deposited materials. We find that the substrate temperature plays a major role on the compensation process and it is necessary to take it into account in order to achieve the optimum compensation conditions. The application of the technique to quantum posts has allowed us to fabricate nanostructures of exceptional length (120 nm). In situ accumulated measurements show that, even in shorter nanostrcutures, relaxation processes can be inhibited with the resulting increase in the material quality.

cond-mat.mtrl-sci↗

arXiv2002

Sandpile formation by revolving rivers

Experimental observation of a new mechanism of sandpile formation is reported. As a steady stream of dry sand is poured onto a horizontal surface, a pile forms which has a thin river of sand on one side flowing from the apex of the pile to the edge of its base. The river rotates about the pile, depositing a new layer of sand with each revolution, thereby growing the pile. For small piles the river is steady and the pile formed is smooth. For larger piles, the river becomes intermittent and the surface of the pile becomes undulating. The frequency of revolution of the river is measured as the pile grows and the results are explained with a simple scaling argument. The essential features of the system that produce the phenomena are discussed.

cond-mat.soft↗