arXiv subjects

A. Rousseau

Publications and source records attributed to A. Rousseau.

9 recordsLinked to original sources

arXiv2024

Isotope substitution and polytype control for point defects identification: the case of the ultraviolet color center in hexagonal boron nitride

Defects in crystals can have a transformative effect on the properties and functionalities of solid-state systems. Dopants in semiconductors are core components in electronic and optoelectronic devices. The control of single color centers is at the basis of advanced applications for quantum technologies. Unintentional defects can also be detrimental to the crystalline structure and hinder the development of novel materials. Whatever the research perspective, the identification of defects is a key but complicated, and often long-standing issue. Here, we present a general methodology to identify point defects by combining isotope substitution and polytype control, with a systematic comparison between experiments and first-principles calculations. We apply this methodology to hexagonal boron nitride (hBN) and its ubiquitous color center emitting in the ultraviolet spectral range. From isotopic purification of the host hBN matrix, a local vibrational mode of the defect is uncovered, and isotope-selective carbon doping proves that this mode belongs to a carbon-based center. Then, by varying the stacking sequence of the host hBN matrix, we unveil different optical responses to hydrostatic pressure for the non-equivalent configurations of this ultraviolet color center. We conclude that this defect is a carbon dimer in the honeycomb lattice of hBN. Our results show that tuning the stacking sequence in different polytypes of a given crystal provides unique fingerprints contributing to the identification of defects in 2D materials.

cond-mat.mtrl-sci↗

arXiv2024

Euclid. II. The VIS Instrument

This paper presents the specification, design, and development of the Visible Camera (VIS) on the ESA Euclid mission. VIS is a large optical-band imager with a field of view of 0.54 deg^2 sampled at 0.1" with an array of 609 Megapixels and spatial resolution of 0.18". It will be used to survey approximately 14,000 deg^2 of extragalactic sky to measure the distortion of galaxies in the redshift range z=0.1-1.5 resulting from weak gravitational lensing, one of the two principal cosmology probes of Euclid. With photometric redshifts, the distribution of dark matter can be mapped in three dimensions, and, from how this has changed with look-back time, the nature of dark energy and theories of gravity can be constrained. The entire VIS focal plane will be transmitted to provide the largest images of the Universe from space to date, reaching m_AB>24.5 with S/N >10 in a single broad I_E~(r+i+z) band over a six year survey. The particularly challenging aspects of the instrument are the control and calibration of observational biases, which lead to stringent performance requirements and calibration regimes. With its combination of spatial resolution, calibration knowledge, depth, and area covering most of the extra-Galactic sky, VIS will also provide a legacy data set for many other fields. This paper discusses the rationale behind the VIS concept and describes the instrument design and development before reporting the pre-launch performance derived from ground calibrations and brief results from the in-orbit commissioning. VIS should reach fainter than m_AB=25 with S/N>10 for galaxies of full-width half-maximum of 0.3" in a 1.3" diameter aperture over the Wide Survey, and m_AB>26.4 for a Deep Survey that will cover more than 50 deg^2. The paper also describes how VIS works with the other Euclid components of survey, telescope, and science data processing to extract the cosmological information.

astro-ph.IM↗

arXiv2023

Boron and nitrogen isotope effects on hexagonal boron nitride properties

The unique physical, mechanical, chemical, optical, and electronic properties of hexagonal boron nitride (hBN) make it a promising two-dimensional material for electronic, optoelectronic, nanophotonic, and quantum devices. Here we report on the changes in hBN's properties induced by isotopic purification in both boron and nitrogen. Previous studies on isotopically pure hBN have focused on purifying the boron isotope concentration in hBN from its natural concentration (approximately 20 at$\%$ $^{10}$B, 80 at$\%$ $^{11}$B) while using naturally abundant nitrogen (99.6 at$\%$ $^{14}$N, 0.4 at$\%$ $^{15}$N), i.e. almost pure $^{14}$N. In this study, we extend the class of isotopically-purified hBN crystals to $^{15}$N. Crystals in the four configurations, namely h$^{10}$B$^{14}$N, h$^{11}$B$^{14}$N, h$^{10}$B$^{15}$N, and h$^{11}$B$^{15}$N, were grown by the metal flux method using boron and nitrogen single isotope ($>99\%$) enriched sources, with nickel plus chromium as the solvent. In-depth Raman and photoluminescence spectroscopies demonstrate the high quality of the monoisotopic hBN crystals with vibrational and optical properties of the $^{15}$N-purified crystals at the state of the art of currently available $^{14}$N-purified hBN. The growth of high-quality h$^{10}$B$^{14}$N, h$^{11}$B$^{14}$N, h$^{10}$B$^{15}$N, and h$^{11}$B$^{15}$N opens exciting perspectives for thermal conductivity control in heat management, as well as for advanced functionalities in quantum technologies.

cond-mat.mtrl-sci↗

arXiv2018

Single and multiple pin(s)-to-liquid discharges: connecting self-organization patterns and ROS production in liquids for plasma agronomy application

Pin-to-liquid discharges are investigated for the activation of liquids dedicated to agriculture applications. They are characterized through their electrical and optical properties, with a particular attention paid to their filaments and self-organized patterns occurring at the liquid interface. We show how modulating their interaction with ambient air can promote the production of reactive species in liquids such as H2O2, NO2- and NO3-. The effects of the resulting plasma activated media are reported on lentils seeds.

physics.plasm-ph↗

arXiv2018

Reactive species involved in higher seeds germination and shoots vigor through direct plasma exposure and plasma-activated liquids

Cold atmospheric plasma treatments have been applied on lenses seeds and shoots to improve their germination and vigor rates. Two approaches have been considered: direct plasma exposure and plasma activation of liquids (tap water, demineralized water and liquid fertilizer). A special focus has been drawn on reactive oxygen species generated in the plasma phase but also in plasma activated media to understand their impact on germination process as well as on plants growth.

q-bio.OT↗

arXiv2017

Anisotropic phase diagram and spin fluctuations of the hyperkagome magnet Gd3Ga5O12 as revealed by sound velocity measurements

Sound velocity and attenuation measurements on the frustrated garnet material Gd3Ga5O12 (GGG) are presented as a function of field and temperature, using two different acoustic modes and with two different magnetic field orientations: [100] and [110]. We demonstrate that the phase diagram is highly anisotropic, with two distinct field-induced ordered phases for H||[110] and only one for H||[100]. Extensive lattice softening is found to occur at low fields, which can be associated with spin fluctuations. However, deep within the spin liquid phase a low-temperature stiffening of the lattice and reduced attenuation provides evidence for a spin gap which may be related to short-range antiferromagnetic correlations over minimal 10-spin loops.

cond-mat.str-el↗

arXiv2017

Promoting lentil germination and stem growth by plasma activated tap water, demineralized water and liquid fertilizer

Tap water, demineralized water and liquid fertilizer have been activated using an atmospheric pressure plasma jet (APPJ) to investigate their benefits for the germination rate and stem elongation rate of lentils from Puy-en-Velay (France). By plasma-activating tap water, we have obtained germination rates as high as 80% (instead of 30% with tap water). Also, higher stem elongation rates and final stem lengths were obtained using activated tap water compared with commercial fertilizer. We show that these rates of germination and stem growth strongly depend on the combination of two radicals generated in the liquids by the plasma: hydrogen peroxide and nitrate. This synergy appears to be a condition for releasing seed dormancy through the endogenous production of NO radicals.

q-bio.OT↗

arXiv2012

Polaron relaxation in ferroelectric thin films

We report a dielectric relaxation in ferroelectric thin films of the ABO3 family. We have compared films of different compositions with several growth modes: sputtering (with and without magnetron) and sol-gel. The relaxation was observed at cryogenic temperature (T<100K) for frequencies from 100Hz up to 10MHz. This relaxation activation energy is always lower than 200meV. It is very similar to the polaron relaxation that we reported in the parent bulk perovskites. Being independent of the materials size, morphology and texture, this relaxation can be a useful probe of defects in actual integrated capacitors with no need for specific shaping

cond-mat.mtrl-sci↗

arXiv2002

Langmuir probe diagnostic studies of pulsed hydrogen plasmas in planar microwave reactors

Langmuir probe techniques have been used to study time and spatially resolved electron densities and electron temperatures in pulse-modulated hydrogen discharges in two different planar microwave reactors (fmicrowave= 2.45 GHz, tpulse= 1 ms). The reactors are (i) a standing-wave radiative slotted waveguide reactor and (ii) a modified travelling-wave radiative slotted waveguide reactor, which generate relatively large plasmas over areas from about 350 cm^2 to 500 cm^2. The plasma properties of these reactor types are of particular interest as they have been used for basic research and for plasma processing, e.g. for surface treatment and layer deposition. In the present study the pressures and microwave powers in the reactors were varied between 33 and 55 Pa and 600 and 3600 W, respectively. In regions with high electromagnetic fields shielded Langmuir probes were used to avoid disturbances of the probe characteristic. Close to the microwave windows of the reactors both the electron density and the electron temperature showed strong inhomogeneities. In the standing-wave reactor the inhomogeneity was found to be spatially modulated by the position of the slots. The maximum value of the electron temperature was about 10 eV and the electron density varied between 0.2 and 14*10^11 cm^-3. The steady state electron temperature in a discharge pulse was reached within a few tens of microseconds whereas the electron density needed some hundreds of microseconds to reach a steady state. Depending on the reactor the electron density reached a maximum between 80 and 200 microseconds after the beginning of the pulse.

physics.plasm-ph↗