SearcharxivSearch

arXiv subjects

A. Secroun

Publications and source records attributed to A. Secroun.

At least 19 recordsLinked to original sources

COLIBRI (SVOM/FM-GFT): Instrumentation and Performances on the SVOM Alerts

COLIBRI, the French Mexican Ground Followup Telescope (FM GFT) for SVOM, is a 1.3 meter rapid response optical facility specifically developed for prompt, multiband observations of GRB afterglows and for delivering subarcsecond localisations of optical counterparts for detailed followup studies. The telescope operates through a fully automated system that manages the entire workflow, from alert reception to counterpart identification. Commissioning results confirm that the telescope meets design specifications, and this paper presents a comprehensive performance assessment of the capabilities.

astro-ph.IM

Euclid: Methodology for derivation of IPC-corrected conversion gain of nonlinear CMOS APS

We introduce a fast method to measure the conversion gain in Complementary Metal-Oxide-Semiconductors (CMOS) Active Pixel Sensors (APS), which accounts for nonlinearity and interpixel capacitance (IPC). The standard 'mean-variance' method is biased because it assumes pixel values depend linearly on signal, and existing methods to correct for nonlinearity are still introducing significant biases. While current IPC correction methods are prohibitively slow for a per-pixel application, our new method uses separate measurements of the IPC kernel to make an almost instantaneous calculation of gain. Validated using test data from a flight detector from the ESA Euclid mission, the IPC correction recovers the results of slower methods within 0.1% accuracy. Meanwhile the nonlinearity correction ensures an estimation of the gain that is independent of signal, correcting a bias of more than 2.5% on gain estimation.

physics.ins-det

Euclid preparation. Overview of Euclid infrared detector performance from ground tests

The paper describes the objectives, design and findings of the pre-launch ground characterisation campaigns of the Euclid infrared detectors. The pixel properties, including baseline, bad pixels, quantum efficiency, inter pixel capacitance, quantum efficiency, dark current, readout noise, conversion gain, response nonlinearity, and image persistence were measured and characterised for each pixel. We describe in detail the test flow definition that allows us to derive the pixel properties and we present the data acquisition and data quality check software implemented for this purpose. We also outline the measurement protocols of all the pixel properties presented and we provide a comprehensive overview of the performance of the Euclid infrared detectors as derived after tuning the operating parameters of the detectors. The main conclusion of this work is that the performance of the infrared detectors Euclid meets the requirements. Pixels classified as non-functioning accounted for less than 0.2% of all science pixels. IPC coupling is minimal and crosstalk between adjacent pixels is less than 1% between adjacent pixels. 95% of the pixels show a QE greater than 80% across the entire spectral range of the Euclid mission. The conversion gain is approximately 0.52 ADU/e-, with a variation less than 1% between channels of the same detector. The reset noise is approximately equal to 23 ADU after reference pixels correction. The readout noise of a single frame is approximately 13 $e^-$ while the signal estimator noise is measured at 7 $e^-$ in photometric mode and 9 $e^-$ in spectroscopic acquisition mode. The deviation from linear response at signal levels up to 80 k$e^-$ is less than 5% for 95% of the pixels. Median persistence amplitudes are less than 0.3% of the signal, though persistence exhibits significant spatial variation and differences between detectors.

astro-ph.IM

Euclid preparation: The NISP spectroscopy channel, on ground performance and calibration

ESA's Euclid cosmology mission relies on the very sensitive and accurately calibrated spectroscopy channel of the Near-Infrared Spectrometer and Photometer (NISP). With three operational grisms in two wavelength intervals, NISP provides diffraction-limited slitless spectroscopy over a field of $0.57$ deg$^2$. A blue grism $\text{BG}_\text{E}$ covers the wavelength range $926$--$1366$\,nm at a spectral resolution $R=440$--$900$ for a $0.5''$ diameter source with a dispersion of $1.24$ nm px$^{-1}$. Two red grisms $\text{RG}_\text{E}$ span $1206$ to $1892$\,nm at $R=550$--$740$ and a dispersion of $1.37$ nm px$^{-1}$. We describe the construction of the grisms as well as the ground testing of the flight model of the NISP instrument where these properties were established.

astro-ph.IM

Low noise flux estimate and data quality control monitoring in EUCLID-NISP cosmological survey

Euclid mission is designed to understand the dark sector of the universe. Precise redshift measurements are provided by H2RG detectors. We propose an unbiased method of fitting the flux with Poisson distributed and correlated data, which has an analytic solution and provides a reliable quality factor - fundamental features to ensure the goals of the mission. We compare our method to other techniques of signal estimation and illustrate the anomaly detection on the flight like detectors. Although our discussion is focused on Euclid NISP instrument, much of what is discussed will be of interest to any mission using similar near-infrared sensors

astro-ph.IM

Euclid: Early Release Observations -- The surface brightness and colour profiles of the far outskirts of galaxies in the Perseus cluster

The Perseus field captured by Euclid as part of its Early Release Observations provides a unique opportunity to study cluster environment ranging from outskirts to dense regions. Leveraging unprecedented optical and near-infrared depths, we investigate the stellar structure of massive disc galaxies in this field. This study focuses on outer disc profiles, including simple exponential (Type I), down- (Type II) and up-bending break (Type III) profiles, and their associated colour gradients, to trace late assembly processes across various environments. Type II profiles, though relatively rare in high dense environments, appear stabilised by internal mechanisms like bars and resonances, even within dense cluster cores. Simulations suggest that in dense environments, Type II profiles tend to evolve into Type I profiles over time. Type III profiles often exhibit small colour gradients beyond the break, hinting at older stellar populations, potentially due to radial migration or accretion events. We analyse correlations between galaxy mass, morphology, and profile types. Mass distributions show weak trends of decreasing mass from the centre to the outskirts of the Perseus cluster. Type III profiles become more prevalent, while Type I profiles decrease in lower-mass galaxies with cluster centric distance. Type I profiles dominate in spiral galaxies, while Type III profiles are more common in S0 galaxies. Type II profiles are consistently observed across all morphological types. While the limited sample size restricts statistical power, our findings shed light on the mechanisms shaping galaxy profiles in cluster environments. Future work should extend observations to the cluster outskirts to enhance statistical significance. Additionally, 3D velocity maps are needed to achieve a non-projected view of galaxy positions, offering deeper insights into spatial distribution and dynamics.

astro-ph.GA

Performance of the image persistence model for Euclid infrared detectors

Large-format infrared detectors are at the heart of major ground and space-based astronomical instruments, and the HgCdTe HxRG is the most widely used. The Near Infrared Spectrometer and Photometer (NISP) of the ESA's Euclid mission launched in July 2023 hosts 16 H2RG detectors in the focal plane. Their performance relies heavily on the effect of image persistence, which results in residual images that can remain in the detector for a long time contaminating any subsequent observations. Deriving a precise model of image persistence is challenging due to the sensitivity of this effect to observation history going back hours or even days. Nevertheless, persistence removal is a critical part of image processing because it limits the accuracy of the derived cosmological parameters. We will present the empirical model of image persistence derived from ground characterization data, adapted to the Euclid observation sequence and compared with the data obtained during the in-orbit calibrations of the satellite.

astro-ph.IM

Euclid. IV. The NISP Calibration Unit

The near-infrared calibration unit (NI-CU) on board Euclid's Near-Infrared Spectrometer and Photometer (NISP) is the first astronomical calibration lamp based on light-emitting diodes (LEDs) to be operated in space. Euclid is a mission in ESA's Cosmic Vision 2015-2025 framework, to explore the dark universe and provide a next-level characterisation of the nature of gravitation, dark matter, and dark energy. Calibrating photometric and spectrometric measurements of galaxies to better than 1.5% accuracy in a survey homogeneously mapping ~14000 deg^2 of extragalactic sky requires a very detailed characterisation of near-infrared (NIR) detector properties, as well their constant monitoring in flight. To cover two of the main contributions - relative pixel-to-pixel sensitivity and non-linearity characteristics - as well as support other calibration activities, NI-CU was designed to provide spatially approximately homogeneous (<12% variations) and temporally stable illumination (0.1%-0.2% over 1200s) over the NISP detector plane, with minimal power consumption and energy dissipation. NI-CU is covers the spectral range ~[900,1900] nm - at cryo-operating temperature - at 5 fixed independent wavelengths to capture wavelength-dependent behaviour of the detectors, with fluence over a dynamic range of >=100 from ~15 ph s^-1 pixel^-1 to >1500 ph s^-1 pixel^-1. For this functionality, NI-CU is based on LEDs. We describe the rationale behind the decision and design process, describe the challenges in sourcing the right LEDs, as well as the qualification process and lessons learned. We also provide a description of the completed NI-CU, its capabilities and performance as well as its limits. NI-CU has been integrated into NISP and the Euclid satellite, and since Euclid's launch in July 2023 has started supporting survey operations.

astro-ph.IM

Euclid. III. The NISP Instrument

The Near-Infrared Spectrometer and Photometer (NISP) on board the Euclid satellite provides multiband photometry and R>=450 slitless grism spectroscopy in the 950-2020nm wavelength range. In this reference article we illuminate the background of NISP's functional and calibration requirements, describe the instrument's integral components, and provide all its key properties. We also sketch the processes needed to understand how NISP operates and is calibrated, and its technical potentials and limitations. Links to articles providing more details and technical background are included. NISP's 16 HAWAII-2RG (H2RG) detectors with a plate scale of 0.3" pix^-1 deliver a field-of-view of 0.57deg^2. In photo mode, NISP reaches a limiting magnitude of ~24.5AB mag in three photometric exposures of about 100s exposure time, for point sources and with a signal-to-noise ratio (SNR) of 5. For spectroscopy, NISP's point-source sensitivity is a SNR = 3.5 detection of an emission line with flux ~2x10^-16erg/s/cm^2 integrated over two resolution elements of 13.4A, in 3x560s grism exposures at 1.6 mu (redshifted Ha). Our calibration includes on-ground and in-flight characterisation and monitoring of detector baseline, dark current, non-linearity, and sensitivity, to guarantee a relative photometric accuracy of better than 1.5%, and relative spectrophotometry to better than 0.7%. The wavelength calibration must be better than 5A. NISP is the state-of-the-art instrument in the NIR for all science beyond small areas available from HST and JWST - and an enormous advance due to its combination of field size and high throughput of telescope and instrument. During Euclid's 6-year survey covering 14000 deg^2 of extragalactic sky, NISP will be the backbone for determining distances of more than a billion galaxies. Its NIR data will become a rich reference imaging and spectroscopy data set for the coming decades.

astro-ph.IM

Euclid: Improving the efficiency of weak lensing shear bias calibration. Pixel noise cancellation and the response method on trial

To obtain an accurate cosmological inference from upcoming weak lensing surveys such as the one conducted by Euclid, the shear measurement requires calibration using galaxy image simulations. We study the efficiency of different noise cancellation methods that aim at reducing the simulation volume required to reach a given precision in the shear measurement. Explicitly, we compared fit methods with different noise cancellations and a method based on responses. We used GalSim to simulate galaxies both on a grid and at random positions in larger scenes. Placing the galaxies at random positions requires their detection, which we performed with SExtractor. On the grid, we neglected the detection step and, therefore, the potential detection bias arising from it. The shear of the simulated images was measured with the fast moment-based method KSB, for which we note deviations from purely linear shear measurement biases. For the estimation of uncertainties, we used bootstrapping as an empirical method. We find that each method we studied on top of shape noise cancellation can further increase the efficiency of calibration simulations. The improvement depends on the considered shear amplitude range and the type of simulations (grid-based or random positions). The response method on a grid for small shears provides the biggest improvement. In the more realistic case of randomly positioned galaxies, we still find an improvement factor of 70 for small shears using the response method. Alternatively, the runtime can be lowered by a factor of 7 already using pixel noise cancellation on top of shape noise cancellation. Furthermore, we demonstrate that the efficiency of shape noise cancellation can be enhanced in the presence of blending if entire scenes are rotated instead of individual galaxies.

astro-ph.CO

Euclid's Near-Infrared Spectrometer and Photometer ready for flight -- review of final performance

ESA's mission Euclid, while undertaking its final integration stage, is fully qualified. Euclid will perform an extragalactic survey ($0<z<2$) by observing in the visible and near-infrared wavelength range. To detect infrared radiation, it is equipped with the Near Infrared Spectrometer and Photometer (NISP) instrument, operating in the 0.9--2 $\mu$m range. In this paper, after introducing the survey strategy, we focus our attention on the NISP Data Processing Unit's Application Software, highlighting the experimental process to obtain the final parametrization of the on-board processing of data produced by the array of 16 Teledyne HAWAII-2RG (HgCdTe) detectors. We report results from the latest ground test campaigns with the flight configuration hardware - complete optical system (Korsh anastigmat telescope), detectors array (0.56 deg$^2$ field of view), and readout systems (16 Digital Control Units and Sidecar ASICs). The performance of the on-board processing is then presented. We also describe a major issue found during the final test phase. We show how the problem was identified and solved thanks to an intensive coordinated effort of an independent review `Tiger' team, lead by ESA, and a team of NISP experts from the Euclid Consortium. An extended PLM level campaign at ambient temperature in Li\`ege and a dedicated test campaign conducted in Marseille on the NISP EQM model eventually confirmed the resolution of the problem. Finally, we report examples of the outstanding spectrometric (using a Blue and two Red Grisms) and photometric performance of the NISP instrument, as derived from the end-to-end payload module test campaign at FOCAL 5 -- CSL; these results include the photometric Point Spread Function (PSF) determination and the spectroscopic dispersion verification.

astro-ph.IM

Euclid: Identification of asteroid streaks in simulated images using deep learning

Up to 150000 asteroids will be visible in the images of the ESA Euclid space telescope, and the instruments of Euclid offer multiband visual to near-infrared photometry and slitless spectra of these objects. Most asteroids will appear as streaks in the images. Due to the large number of images and asteroids, automated detection methods are needed. A non-machine-learning approach based on the StreakDet software was previously tested, but the results were not optimal for short and/or faint streaks. We set out to improve the capability to detect asteroid streaks in Euclid images by using deep learning. We built, trained, and tested a three-step machine-learning pipeline with simulated Euclid images. First, a convolutional neural network (CNN) detected streaks and their coordinates in full images, aiming to maximize the completeness (recall) of detections. Then, a recurrent neural network (RNN) merged snippets of long streaks detected in several parts by the CNN. Lastly, gradient-boosted trees (XGBoost) linked detected streaks between different Euclid exposures to reduce the number of false positives and improve the purity (precision) of the sample. The deep-learning pipeline surpasses the completeness and reaches a similar level of purity of a non-machine-learning pipeline based on the StreakDet software. Additionally, the deep-learning pipeline can detect asteroids 0.25-0.5 magnitudes fainter than StreakDet. The deep-learning pipeline could result in a 50% increase in the number of detected asteroids compared to the StreakDet software. There is still scope for further refinement, particularly in improving the accuracy of streak coordinates and enhancing the completeness of the final stage of the pipeline, which involves linking detections across multiple exposures.

astro-ph.EP

Euclid preparation: XXVIII. Modelling of the weak lensing angular power spectrum

This work considers which higher-order effects in modelling the cosmic shear angular power spectra must be taken into account for Euclid. We identify which terms are of concern, and quantify their individual and cumulative impact on cosmological parameter inference from Euclid. We compute the values of these higher-order effects using analytic expressions, and calculate the impact on cosmological parameter estimation using the Fisher matrix formalism. We review 24 effects and find the following potentially need to be accounted for: the reduced shear approximation, magnification bias, source-lens clustering, source obscuration, local Universe effects, and the flat Universe assumption. Upon computing these explicitly, and calculating their cosmological parameter biases, using a maximum multipole of $\ell=5000$, we find that the magnification bias, source-lens clustering, source obscuration, and local Universe terms individually produce significant ($\,>0.25\sigma$) cosmological biases in one or more parameters, and accordingly must be accounted for. In total, over all effects, we find biases in $\Omega_{\rm m}$, $\Omega_{\rm b}$, $h$, and $\sigma_{8}$ of $0.73\sigma$, $0.28\sigma$, $0.25\sigma$, and $-0.79\sigma$, respectively, for flat $\Lambda$CDM. For the $w_0w_a$CDM case, we find biases in $\Omega_{\rm m}$, $\Omega_{\rm b}$, $h$, $n_{\rm s}$, $\sigma_{8}$, and $w_a$ of $1.49\sigma$, $0.35\sigma$, $-1.36\sigma$, $1.31\sigma$, $-0.84\sigma$, and $-0.35\sigma$, respectively; which are increased relative to the $\Lambda$CDM due to additional degeneracies as a function of redshift and scale.

astro-ph.CO

Euclid preparation. XXVII. Covariance model validation for the 2-point correlation function of galaxy clusters

Aims. We validate a semi-analytical model for the covariance of real-space 2-point correlation function of galaxy clusters. Methods. Using 1000 PINOCCHIO light cones mimicking the expected Euclid sample of galaxy clusters, we calibrate a simple model to accurately describe the clustering covariance. Then, we use such a model to quantify the likelihood analysis response to variations of the covariance, and investigate the impact of a cosmology-dependent matrix at the level of statistics expected for the Euclid survey of galaxy clusters. Results. We find that a Gaussian model with Poissonian shot-noise does not correctly predict the covariance of the 2-point correlation function of galaxy clusters. By introducing few additional parameters fitted from simulations, the proposed model reproduces the numerical covariance with 10 per cent accuracy, with differences of about 5 per cent on the figure of merit of the cosmological parameters $\Omega_{\rm m}$ and $\sigma_8$. Also, we find that the cosmology-dependence of the covariance adds valuable information that is not contained in the mean value, significantly improving the constraining power of cluster clustering. Finally, we find that the cosmological figure of merit can be further improved by taking mass binning into account. Our results have significant implications for the derivation of cosmological constraints from the 2-point clustering statistics of the Euclid survey of galaxy clusters.

astro-ph.CO

Euclid Near Infrared Spectrometer and Photometer instrument flight model presentation, performance and ground calibration results summary

The NISP (Near Infrared Spectrometer and Photometer) is one of the two Euclid instruments. It operates in the near-IR spectral region (950-2020nm) as a photometer and spectrometer. The instrument is composed of: a cold (135 K) optomechanical subsystem consisting of a Silicon carbide structure, an optical assembly, a filter wheel mechanism, a grism wheel mechanism, a calibration unit, and a thermal control system, a detection system based on a mosaic of 16 H2RG with their front-end readout electronic, and a warm electronic system (290 K) composed of a data processing / detector control unit and of an instrument control unit that interfaces with the spacecraft via a 1553 bus for command and control and via Spacewire links for science data. This paper presents: the final architecture of the flight model instrument and subsystems, and the performance and the ground calibration measurement done at NISP level and at Euclid Payload Module level at operational cold temperature.

astro-ph.IM

Euclid Near Infrared Spectro-Photometer: spatial considerations on H2RG detectors interpixel capacitance and IPC corrected conversion gain from on-ground characterization

Euclid is a major ESA mission scheduled for launch in 2023-2024 to map the geometry of the dark Universe using two primary probes, weak gravitational lensing and galaxy clustering. \Euclid's instruments, a visible imager (VIS) and an infrared spectrometer and photometer (NISP) have both been designed and built by Euclid Consortium teams. The NISP instrument will hold a large focal plane array of 16 near-infrared H2RG detectors, which are key elements to the performance of the NISP, and therefore to the science return of the mission. Euclid NISP H2RG flight detectors have been individually and thoroughly characterized at Centre de Physique des Particules de Marseille (CPPM) during a whole year with a view to producing a reference database of performance pixel maps. Analyses have been ongoing and have shown the relevance of taking into account spatial variations in deriving performance parameters. This paper will concentrate on interpixel capacitance (IPC) and conversion gain. First, per pixel IPC coefficient maps will be derived thanks to single pixel reset (SPR) measurements and a new IPC correction method will be defined and validated. Then, the paper will look into correlation effects of IPC and their impact on the derivation of per super-pixel IPC-free conversion gain maps. Eventually, several conversion gain values will be defined over clearly distinguishable regions.

astro-ph.IM

Euclid: Testing the Copernican principle with next-generation surveys

The Copernican principle, the notion that we are not at a special location in the Universe, is one of the cornerstones of modern cosmology and its violation would invalidate the Friedmann-Lema\^{\i}tre-Robertson-Walker (FLRW) metric, causing a major change in our understanding of the Universe. Thus, it is of fundamental importance to perform observational tests of this principle. We determine the precision with which future surveys will be able to test the Copernican principle and their ability to detect any possible violations. We forecast constraints on the inhomogeneous Lema\^{\i}tre-Tolman-Bondi model with a cosmological constant $\Lambda$ ($\Lambda$LTB), basically a cosmological constant $\Lambda$ and cold dark matter ($\Lambda$CDM) model, but endowed with a spherical inhomogeneity. We consider combinations of currently available data and simulated Euclid data, together with external data products, based on both $\Lambda$CDM and $\Lambda$LTB fiducial models. These constraints are compared to the expectations from the Copernican principle. When considering the $\Lambda$CDM fiducial model, we find that Euclid data, in combination with other current and forthcoming surveys, will improve the constraints on the Copernican principle by about $30\%$, with $\pm10\%$ variations depending on the observables and scales considered. On the other hand, when considering a $\Lambda$LTB fiducial model, we find that future Euclid data, combined with other current and forthcoming data sets, will be able to detect Gpc-scale inhomogeneities of contrast $-0.1$. Next-generation surveys, such as Euclid, will thoroughly test homogeneity at large scales, tightening the constraints on possible violations of the Copernican principle.

astro-ph.CO

Euclid preparation: XX. The Complete Calibration of the Color-Redshift Relation survey: LBT observations and data release

The Complete Calibration of the Color-Redshift Relation survey (C3R2) is a spectroscopic programme designed to empirically calibrate the galaxy color-redshift relation to the Euclid depth (I_E=24.5), a key ingredient for the success of Stage IV dark energy projects based on weak lensing cosmology. A spectroscopic calibration sample as representative as possible of the galaxies in the Euclid weak lensing sample is being collected, selecting galaxies from a self-organizing map (SOM) representation of the galaxy color space. Here, we present the results of a near-infrared H- and K-bands spectroscopic campaign carried out using the LUCI instruments at the LBT. For a total of 251 galaxies, we present new highly-reliable redshifts in the 1.3<= z <=1.7 and 2<= z<=2.7 ranges. The newly-determined redshifts populate 49 SOM cells which previously contained no spectroscopic measurements and almost double the occupation numbers of an additional 153 SOM cells. A final optical ground-based observational effort is needed to calibrate the missing cells in particular in the redshift range 1.7<= z<=2.7 that lack spectroscopic calibration. In the end, Euclid itself will deliver telluric-free NIR spectra that can complete the calibration.

astro-ph.CO