Searcharxiv⌕ Search

arXiv subjects

A. Sesana

Publications and source records attributed to A. Sesana.

At least 37 records · Page 2Linked to original sources

Robust parameter estimation from pulsar timing data

Recently, global pulsar timing arrays have released results from searching for a nano-Hertz gravitational wave background signal. Although there has not been any definite evidence of the presence of such a signal in residuals of pulsar timing data yet, with more and improved data in future, a statistically significant detection is expected to be made. Stochastic algorithms are used to sample a very large parameter space to infer results from data. In this paper, we attempt to rule out effects arising from the stochasticity of the sampler in the inference process. We compare different configurations of nested samplers and the more commonly used markov chain monte carlo method to sample the pulsar timing array parameter space and account for times taken by the different samplers on same data. Although we obtain consistent results on parameters from different sampling algorithms, we propose two different samplers for robustness checks on data in the future to account for cross-checks between sampling methods as well as realistic run-times.

gr-qc↗

The International Pulsar Timing Array second data release: Search for an isotropic Gravitational Wave Background

We searched for an isotropic stochastic gravitational wave background in the second data release of the International Pulsar Timing Array, a global collaboration synthesizing decadal-length pulsar-timing campaigns in North America, Europe, and Australia. In our reference search for a power law strain spectrum of the form $h_c = A(f/1\,\mathrm{yr}^{-1})^α$, we found strong evidence for a spectrally-similar low-frequency stochastic process of amplitude $A = 3.8^{+6.3}_{-2.5}\times10^{-15}$ and spectral index $α= -0.5 \pm 0.5$, where the uncertainties represent 95\% credible regions, using information from the auto- and cross-correlation terms between the pulsars in the array. For a spectral index of $α= -2/3$, as expected from a population of inspiralling supermassive black hole binaries, the recovered amplitude is $A = 2.8^{+1.2}_{-0.8}\times10^{-15}$. Nonetheless, no significant evidence of the Hellings-Downs correlations that would indicate a gravitational-wave origin was found. We also analyzed the constituent data from the individual pulsar timing arrays in a consistent way, and clearly demonstrate that the combined international data set is more sensitive. Furthermore, we demonstrate that this combined data set produces comparable constraints to recent single-array data sets which have more data than the constituent parts of the combination. Future international data releases will deliver increased sensitivity to gravitational wave radiation, and significantly increase the detection probability.

astro-ph.HE↗

Noise analysis in the European Pulsar Timing Array data release 2 and its implications on the gravitational-wave background search

The European Pulsar Timing Array (EPTA) collaboration has recently released an extended data set for six pulsars (DR2) and reported evidence for a common red noise signal. Here we present a noise analysis for each of the six pulsars. We consider several types of noise: (i) radio frequency independent, "achromatic", and time-correlated red noise; (ii) variations of dispersion measure and scattering; (iii) system and band noise; and (iv) deterministic signals (other than gravitational waves) that could be present in the PTA data. We perform Bayesian model selection to find the optimal combination of noise components for each pulsar. Using these custom models we revisit the presence of the common uncorrelated red noise signal previously reported in the EPTA DR2 and show that the data still supports it with a high statistical significance. Next, we confirm that there is no preference for or against the Hellings-Downs spatial correlations expected for the stochastic gravitational-wave background. The main conclusion of the EPTA DR2 paper remains unchanged despite a very significant change in the noise model of each pulsar. However, modelling the noise is essential for the robust detection of gravitational waves and its impact could be significant when analysing the next EPTA data release, which will include a larger number of pulsars and more precise measurements.

astro-ph.HE↗

Multi-messenger-Athena Synergy White Paper

In this paper we explore the scientific synergies between Athena and some of the key multi-messenger facilities that should be operative concurrently with Athena. These facilities include LIGO A+, Advanced Virgo+ and future detectors for ground-based observation of gravitational waves (GW), LISA for space-based observations of GW, IceCube and KM3NeT for neutrino observations, and CTA for very high energy observations. These science themes encompass pressing issues in astrophysics, cosmology and fundamental physics such as: the central engine and jet physics in compact binary mergers, accretion processes and jet physics in Super-Massive Binary Black Holes (SMBBHs) and in compact stellar binaries, the equation of state of neutron stars, cosmic accelerators and the origin of Cosmic Rays (CRs), the origin of intermediate and high-Z elements in the Universe, the Cosmic distance scale and tests of General Relativity and the Standard Model. Observational strategies for implementing the identified science topics are also discussed. A significant part of the sources targeted by multi-messenger facilities is of transient nature. We have thus also discussed the synergy of \textsl{Athena} with wide-field high-energy facilities, taking THESEUS as a case study for transient discovery. This discussion covers all the Athena science goals that rely on follow-up observations of high-energy transients identified by external observatories, and includes also topics that are not based on multi-messenger observations, such as the search for missing baryons or the observation of early star populations and metal enrichment at the cosmic dawn with Gamma-Ray Bursts (GRBs).

astro-ph.HE↗

Common-red-signal analysis with 24-yr high-precision timing of the European Pulsar Timing Array: Inferences in the stochastic gravitational-wave background search

We present results from the search for a stochastic gravitational-wave background (GWB) as predicted by the theory of General Relativity using six radio millisecond pulsars from the Data Release 2 (DR2) of the European Pulsar Timing Array (EPTA) covering a timespan up to 24 years. A GWB manifests itself as a long-term low-frequency stochastic signal common to all pulsars, a common red signal (CRS), with the characteristic Hellings-Downs (HD) spatial correlation. Our analysis is performed with two independent pipelines, \eprise{} and \tn{}+\ftwo{}, which produce consistent results. A search for a CRS with simultaneous estimation of its spatial correlations yields spectral properties compatible with theoretical GWB predictions, but does not result in the required measurement of the HD correlation, as required for GWB detection. Further Bayesian model comparison between different types of CRSs, including a GWB, finds the most favoured model to be the common uncorrelated red noise described by a power-law with $A = 5.13_{-2.73}^{+4.20} \times 10^{-15}$ and $γ= 3.78_{-0.59}^{+0.69}$ (95\% credible regions). Fixing the spectral index to $γ=13/3$ as expected from the GWB by circular, inspiralling supermassive black-hole binaries results in an amplitude of $A =2.95_{-0.72}^{+0.89} \times 10^{-15}$. We implement three different models, BAYESEPHEM, LINIMOSS and EPHEMGP, to address possible Solar-system ephemeris (SSE) systematics and conclude that our results may only marginally depend on these effects. This work builds on the methods and models from the studies on the EPTA DR1. We show that under the same analysis framework the results remain consistent after the data set extension.

astro-ph.HE↗

A pulsar-based timescale from the International Pulsar Timing Array

We have constructed a new timescale, TT(IPTA16), based on observations of radio pulsars presented in the first data release from the International Pulsar Timing Array (IPTA). We used two analysis techniques with independent estimates of the noise models for the pulsar observations and different algorithms for obtaining the pulsar timescale. The two analyses agree within the estimated uncertainties and both agree with TT(BIPM17), a post-corrected timescale produced by the Bureau International des Poids et Mesures (BIPM). We show that both methods could detect significant errors in TT(BIPM17) if they were present. We estimate the stability of the atomic clocks from which TT(BIPM17) is derived using observations of four rubidium fountain clocks at the US Naval Observatory. Comparing the power spectrum of TT(IPTA16) with that of these fountain clocks suggests that pulsar-based timescales are unlikely to contribute to the stability of the best timescales over the next decade, but they will remain a valuable independent check on atomic timescales. We also find that the stability of the pulsar-based timescale is likely to be limited by our knowledge of solar-system dynamics, and that errors in TT(BIPM17) will not be a limiting factor for the primary goal of the IPTA, which is to search for the signatures of nano-Hertz gravitational waves.

astro-ph.IM↗

The International Pulsar Timing Array: Second data release

In this paper, we describe the International Pulsar Timing Array second data release, which includes recent pulsar timing data obtained by three regional consortia: the European Pulsar Timing Array, the North American Nanohertz Observatory for Gravitational Waves, and the Parkes Pulsar Timing Array. We analyse and where possible combine high-precision timing data for 65 millisecond pulsars which are regularly observed by these groups. A basic noise analysis, including the processes which are both correlated and uncorrelated in time, provides noise models and timing ephemerides for the pulsars. We find that the timing precisions of pulsars are generally improved compared to the previous data release, mainly due to the addition of new data in the combination. The main purpose of this work is to create the most up-to-date IPTA data release. These data are publicly available for searches for low-frequency gravitational waves and other pulsar science.

astro-ph.HE↗

Studying the solar system with the International Pulsar Timing Array

Pulsar-timing analyses are sensitive to errors in the solar-system ephemerides (SSEs) that timing models utilise to estimate the location of the solar-system barycentre, the quasi-inertial reference frame to which all recorded pulse times-of-arrival are referred. Any error in the SSE will affect all pulsars, therefore pulsar timing arrays (PTAs) are a suitable tool to search for such errors and impose independent constraints on relevant physical parameters. We employ the first data release of the International Pulsar Timing Array to constrain the masses of the planet-moons systems and to search for possible unmodelled objects (UMOs) in the solar system. We employ ten SSEs from two independent research groups, derive and compare mass constraints of planetary systems, and derive the first PTA mass constraints on asteroid-belt objects. Constraints on planetary-system masses have been improved by factors of up to 20 from the previous relevant study using the same assumptions, with the mass of the Jovian system measured at 9.5479189(3)$\times10^{-4}$ $M_{\odot}$. The mass of the dwarf planet Ceres is measured at 4.7(4)$\times10^{-10}$ $M_{\odot}$. We also present the first sensitivity curves using real data that place generic limits on the masses of UMOs, which can also be used as upper limits on the mass of putative exotic objects. For example, upper limits on dark-matter clumps are comparable to published limits using independent methods. While the constraints on planetary masses derived with all employed SSEs are consistent, we note and discuss differences in the associated timing residuals and UMO sensitivity curves.

astro-ph.EP↗

Improving timing sensitivity in the microhertz frequency regime: limits from PSR J1713$+$0747 on gravitational waves produced by super-massive black-hole binaries

We search for continuous gravitational waves (CGWs) produced by individual super-massive black-hole binaries (SMBHBs) in circular orbits using high-cadence timing observations of PSR J1713$+$0747. We observe this millisecond pulsar using the telescopes in the European Pulsar Timing Array (EPTA) with an average cadence of approximately 1.6 days over the period between April 2011 and July 2015, including an approximately daily average between February 2013 and April 2014. The high-cadence observations are used to improve the pulsar timing sensitivity across the GW frequency range of $0.008-5$ $μ$Hz. We use two algorithms in the analysis, including a spectral fitting method and a Bayesian approach. For an independent comparison, we also use a previously published Bayesian algorithm. We find that the Bayesian approaches provide optimal results and the timing observations of the pulsar place a 95 per cent upper limit on the sky-averaged strain amplitude of CGWs to be $\lesssim3.5\times10^{-13}$ at a reference frequency of 1 $μ$Hz. We also find a 95 per cent upper limit on the sky-averaged strain amplitude of low-frequency CGWs to be $\lesssim1.4\times10^{-14}$ at a reference frequency of 20~nHz.

astro-ph.HE↗

Predicting the hypervelocity star population in Gaia

Hypervelocity stars (HVSs) are amongst the fastest objects in our Milky Way. These stars are predicted to come from the Galactic center (GC) and travel along unbound orbits across the Galaxy. In the coming years, the ESA satellite Gaia will provide the most complete and accurate catalogue of the Milky Way, with full astrometric parameters for more than $1$ billion stars. In this paper, we present the expected sample size and properties (mass, magnitude, spatial, velocity distributions) of HVSs in the Gaia stellar catalogue. We build three Gaia mock catalogues of HVSs anchored to current observations, exploring different ejection mechanisms and GC stellar population properties. In all cases, we predict hundreds to thousands of HVSs with precise proper motion measurements within a few tens of kpc from us. For stars with a relative error in total proper motion below $10 \%$, the mass range extends to ~$10 M_{\odot}$ but peaks at ~$1$ $M_\odot$. The majority of Gaia HVSs will therefore probe a different mass and distance range compared to the current non-Gaia sample. In addition, a subset of a few hundreds to a few thousands of HVSs with $M$ ~ $3$ $M_\odot$ will be bright enough to have a precise measurement of the three-dimensional velocity from Gaia alone. Finally, we show that Gaia will provide more precise proper motion measurements for the current sample of HVS candidates. This will help identifying their birthplace narrowing down their ejection location, and confirming or rejecting their nature as HVSs. Overall, our forecasts are extremely encouraging in terms of quantity and quality of HVS data that can be exploited to constrain both the Milky Way potential and the GC properties.

astro-ph.GA↗

Testing the binary hypothesis: pulsar timing constraints on supermassive black hole binary candidates

The advent of time domain astronomy is revolutionizing our understanding of the Universe. Programs such as the Catalina Real-time Transient Survey (CRTS) or the Palomar Transient Factory (PTF) surveyed millions of objects for several years, allowing variability studies on large statistical samples. The inspection of $\approx$250k quasars in CRTS resulted in a catalogue of 111 potentially periodic sources, put forward as supermassive black hole binary (SMBHB) candidates. A similar investigation on PTF data yielded 33 candidates from a sample of $\approx$35k quasars. Working under the SMBHB hypothesis, we compute the implied SMBHB merger rate and we use it to construct the expected gravitational wave background (GWB) at nano-Hz frequencies, probed by pulsar timing arrays (PTAs). After correcting for incompleteness and assuming virial mass estimates, we find that the GWB implied by the CRTS sample exceeds the current most stringent PTA upper limits by almost an order of magnitude. After further correcting for the implicit bias in virial mass measurements, the implied GWB drops significantly but is still in tension with the most stringent PTA upper limits. Similar results hold for the PTF sample. Bayesian model selection shows that the null hypothesis (whereby the candidates are false positives) is preferred over the binary hypothesis at about $2.3σ$ and $3.6σ$ for the CRTS and PTF samples respectively. Although not decisive, our analysis highlights the potential of PTAs as astrophysical probes of individual SMBHB candidates and indicates that the CRTS and PTF samples are likely contaminated by several false positives.

astro-ph.HE↗

All correlations must die: Assessing the significance of a stochastic gravitational-wave background in pulsar-timing arrays

We present two methods for determining the significance of a stochastic gravitational-wave (GW) background affecting a pulsar-timing array, where detection is based on evidence for quadrupolar spatial correlations between pulsars. Rather than constructing noise simulations, we eliminate the GWB spatial correlations in the true datasets to assess detection significance with all real data features intact. In our first method, we perform random phase shifts in the signal-model basis functions. This phase shifting eliminates signal phase coherence between pulsars, while keeping the statistical properties of the pulsar timing residuals intact. We then explore a method to null correlations between pulsars by using a "scrambled" overlap-reduction function in the signal model for the array. This scrambled function is orthogonal to what we expect of a real GW background signal. We demonstrate the efficacy of these methods using Bayesian model selection on a set of simulated datasets that contain a stochastic GW signal, timing noise, undiagnosed glitches, and uncertainties in the Solar system ephemeris. Finally, we introduce an overarching formalism under which these two techniques are naturally linked. These methods are immediately applicable to all current pulsar-timing array datasets, and should become standard tools for future analyses.

astro-ph.IM↗

Selection bias in dynamically-measured super-massive black hole samples: consequences for pulsar timing arrays

Supermassive black hole -- host galaxy relations are key to the computation of the expected gravitational wave background (GWB) in the pulsar timing array (PTA) frequency band. It has been recently pointed out that standard relations adopted in GWB computations are in fact biased-high. We show that when this selection bias is taken into account, the expected GWB in the PTA band is a factor of about three smaller than previously estimated. Compared to other scaling relations recently published in the literature, the median amplitude of the signal at $f=1$yr$^{-1}$ drops from $1.3\times10^{-15}$ to $4\times10^{-16}$. Although this solves any potential tension between theoretical predictions and recent PTA limits without invoking other dynamical effects (such as stalling, eccentricity or strong coupling with the galactic environment), it also makes the GWB detection more challenging.

astro-ph.GA↗

High-precision timing of 42 millisecond pulsars with the European Pulsar Timing Array

We report on the high-precision timing of 42 radio millisecond pulsars (MSPs) observed by the European Pulsar Timing Array (EPTA). This EPTA Data Release 1.0 extends up to mid-2014 and baselines range from 7-18 years. It forms the basis for the stochastic gravitational-wave background, anisotropic background, and continuous-wave limits recently presented by the EPTA elsewhere. The Bayesian timing analysis performed with TempoNest yields the detection of several new parameters: seven parallaxes, nine proper motions and, in the case of six binary pulsars, an apparent change of the semi-major axis. We find the NE2001 Galactic electron density model to be a better match to our parallax distances (after correction from the Lutz-Kelker bias) than the M2 and M3 models by Schnitzeler (2012). However, we measure an average uncertainty of 80\% (fractional) for NE2001, three times larger than what is typically assumed in the literature. We revisit the transverse velocity distribution for a set of 19 isolated and 57 binary MSPs and find no statistical difference between these two populations. We detect Shapiro delay in the timing residuals of PSRs J1600$-$3053 and J1918$-$0642, implying pulsar and companion masses $m_p=1.22_{-0.35}^{+0.5} \text{M}_{\odot}$, $m_c = 0.21_{-0.04}^{+0.06} \text{M}_{\odot }$ and $m_p=1.25_{-0.4}^{+0.6} \text{M}_{\odot}$, $m_c = 0.23_{-0.05}^{+0.07} \text{M}_{\odot }$, respectively. Finally, we use the measurement of the orbital period derivative to set a stringent constraint on the distance to PSRs J1012$+$5307 and J1909$-$3744, and set limits on the longitude of ascending node through the search of the annual-orbital parallax for PSRs J1600$-$3053 and J1909$-$3744.

astro-ph.HE↗

From Spin Noise to Systematics: Stochastic Processes in the First International Pulsar Timing Array Data Release

We analyse the stochastic properties of the 49 pulsars that comprise the first International Pulsar Timing Array (IPTA) data release. We use Bayesian methodology, performing model selection to determine the optimal description of the stochastic signals present in each pulsar. In addition to spin-noise and dispersion-measure (DM) variations, these models can include timing noise unique to a single observing system, or frequency band. We show the improved radio-frequency coverage and presence of overlapping data from different observing systems in the IPTA data set enables us to separate both system and band-dependent effects with much greater efficacy than in the individual PTA data sets. For example, we show that PSR J1643$-$1224 has, in addition to DM variations, significant band-dependent noise that is coherent between PTAs which we interpret as coming from time-variable scattering or refraction in the ionised interstellar medium. Failing to model these different contributions appropriately can dramatically alter the astrophysical interpretation of the stochastic signals observed in the residuals. In some cases, the spectral exponent of the spin noise signal can vary from 1.6 to 4 depending upon the model, which has direct implications for the long-term sensitivity of the pulsar to a stochastic gravitational-wave (GW) background. By using a more appropriate model, however, we can greatly improve a pulsar's sensitivity to GWs. For example, including system and band-dependent signals in the PSR J0437$-$4715 data set improves the upper limit on a fiducial GW background by $\sim 60\%$ compared to a model that includes DM variations and spin-noise only.

astro-ph.IM↗

The International Pulsar Timing Array: First Data Release

The highly stable spin of neutron stars can be exploited for a variety of (astro-)physical investigations. In particular arrays of pulsars with rotational periods of the order of milliseconds can be used to detect correlated signals such as those caused by gravitational waves. Three such "Pulsar Timing Arrays" (PTAs) have been set up around the world over the past decades and collectively form the "International" PTA (IPTA). In this paper, we describe the first joint analysis of the data from the three regional PTAs, i.e. of the first IPTA data set. We describe the available PTA data, the approach presently followed for its combination and suggest improvements for future PTA research. Particular attention is paid to subtle details (such as underestimation of measurement uncertainty and long-period noise) that have often been ignored but which become important in this unprecedentedly large and inhomogeneous data set. We identify and describe in detail several factors that complicate IPTA research and provide recommendations for future pulsar timing efforts. The first IPTA data release presented here (and available online) is used to demonstrate the IPTA's potential of improving upon gravitational-wave limits placed by individual PTAs by a factor of ~2 and provides a 2-sigma limit on the dimensionless amplitude of a stochastic GWB of 1.7x10^{-15} at a frequency of 1 yr^{-1}. This is 1.7 times less constraining than the limit placed by (Shannon et al. 2015), due mostly to the more recent, high-quality data they used.

astro-ph.IM↗

The noise properties of 42 millisecond pulsars from the European Pulsar Timing Array and their impact on gravitational wave searches

The sensitivity of Pulsar Timing Arrays to gravitational waves depends on the noise present in the individual pulsar timing data. Noise may be either intrinsic or extrinsic to the pulsar. Intrinsic sources of noise will include rotational instabilities, for example. Extrinsic sources of noise include contributions from physical processes which are not sufficiently well modelled, for example, dispersion and scattering effects, analysis errors and instrumental instabilities. We present the results from a noise analysis for 42 millisecond pulsars (MSPs) observed with the European Pulsar Timing Array. For characterising the low-frequency, stochastic and achromatic noise component, or "timing noise", we employ two methods, based on Bayesian and frequentist statistics. For 25 MSPs, we achieve statistically significant measurements of their timing noise parameters and find that the two methods give consistent results. For the remaining 17 MSPs, we place upper limits on the timing noise amplitude at the 95% confidence level. We additionally place an upper limit on the contribution to the pulsar noise budget from errors in the reference terrestrial time standards (below 1%), and we find evidence for a noise component which is present only in the data of one of the four used telescopes. Finally, we estimate that the timing noise of individual pulsars reduces the sensitivity of this data set to an isotropic, stochastic GW background by a factor of >9.1 and by a factor of >2.3 for continuous GWs from resolvable, inspiralling supermassive black-hole binaries with circular orbits.

astro-ph.IM↗

Infalling clouds onto super-massive black hole binaries - I. Formation of discs, accretion and gas dynamics

There is compelling evidence that most -if not all- galaxies harbour a super-massive black hole (SMBH) at their nucleus, hence binaries of these massive objects are an inevitable product of the hierarchical evolution of structures in the universe, and represent an important but thus-far elusive phase of galaxy evolution. Gas accretion via a circumbinary disc is thought to be important for the dynamical evolution of SMBH binaries, as well as in producing luminous emission that can be used to infer their properties. One plausible source of the gaseous fuel is clumps of gas formed due to turbulence and gravitational instabilities in the interstellar medium, that later fall toward and interact with the binary. In this context, we model numerically the evolution of turbulent clouds in near-radial infall onto equal-mass SMBH binaries, using a modified version of the SPH code GADGET-3. We present a total of 12 simulations that explore different possible pericentre distances and relative inclinations, and show that the formation of circumbinary discs and discs around each SMBH ('mini-discs') depend on those parameters. We also study the dynamics of the formed discs, and the variability of the feeding rate onto the SMBHs in the different configurations.

astro-ph.HE↗