arXiv subjects

A. Sopczak

Publications and source records attributed to A. Sopczak.

At least 37 records · Page 2Linked to original sources

arXiv2002

Determining $\tanβ$ with Neutral and Charged Higgs Bosons at a Future $e^+e^-$ Linear Collider

The ratio of neutral Higgs field vacuum expectation values, tan(beta), is one of the most important parameters to determine in either the Minimal Supersymmetric Standard Model (MSSM) or a general type-II Two-Higgs Doublet Model (2HDM). Assuming an energy and integrated luminosity of sqrts=500 GeV and L=2000 fb-1 at a future linear collider (LC), we show that a very accurate determination of tan(beta) will be possible for low and high tan(beta) values by measuring the production rates of Higgs bosons and reconstructing Higgs boson decays. In particular, based on a TESLA simulation, and assuming no other light Higgs bosons and 100<=mA<=200 GeV, we find that the rate for the process e+e- --> bbA --> bbbb provides a good determination of tan(beta) at high tan(beta). In the MSSM Higgs sector, in the sample case of mA = 200 GeV, we find that the rates for e+e- --> bbA+bbH --> bbbb and for e+e- --> HA --> bbbb provide a good determination of tan(beta) at high and low tan(beta), respectively. We also show that the direct measurement of the average total widths of the H and A in e+e- --> HA --> bbbb events provides an excellent determination of tan(beta) at large values. In addition, the charged Higgs boson process e+e- --> H+H- --> tbtb has been studied. The sensitivity to tan(beta) at the LHC obtained directly from heavy Higgs boson production is briefly compared to the LC results.

hep-ph↗

arXiv2002

Precision Measurements in the Scalar Top Sector of the MSSM at a Linear e+e- Collider

The scalar top discovery potential has been studied for the TESLA project with a full-statistics background simulation at sqrt(s)=500 GeV and L=500 fb-1. The beam polarization is very important to measure the scalar top mixing angle and to determine its mass. The latest estimation of the beam polarization parameters is applied. This study includes e+ polarization, which improves the sensitivity. For a 180 GeV scalar top at minimum production cross section, we obtain Delta(m)=0.8 GeV and Delta(cos(Theta))=0.008 in the neutralino channel, and Delta(m)=0.5 GeV and Delta(cos(Theta))=0.004 in the chargino channel. The MSSM parameters for the Snowmass point 5 at cos(Theta)=0.513 predict a scalar top of 210 GeV and a neutralino of about 120 GeV. For this parameter choice Delta(m)=0.95 GeV and Delta(cos(Theta))=0.0125 is obtained, and a preliminary c-tagging study is presented in the neutralino channel.

hep-ph↗

arXiv2002

Overview of tan(beta) Determination at a Linear e+e- Collider

The ratio of the vacuum expectation value of the two Higgs doublets, tan(beta), is an important parameter of the general 2-Higgs-Doublet Model (2HDM) and the Minimal Supersymmetric extension of the Standard Model (MSSM). The expected uncertainty on the determination of tan(beta) at a Linear Collider (LC) of at least 500 GeV center-of-mass energy and high luminosity is reviewed based on studies of neutral and charged Higgs boson production.

hep-ph↗

arXiv2002

Sfermion Precision Measurements at a Linear Collider

At future e+- e- linear colliders, the event rates and clean signals of scalar fermion production - in particular for the scalar leptons - allow very precise measurements of their masses and couplings and the determination of their quantum numbers. Various methods are proposed for extracting these parameters from the data at the sfermion thresholds and in the continuum. At the same time, NLO radiative corrections and non-zero width effects have been calculated in order to match the experimental accuracy. The substantial mixing expected for the third generation sfermions opens up additional opportunities. Techniques are presented for determining potential CP-violating phases and for extracting tan(beta) from the stau sector, in particular at high values. The consequences of possible large mass differences in the stop and sbottom system are explored in dedicated analyses.

hep-ph↗

arXiv2002

Determination of $\tanβ$ at a Future $e^+e^-$ Linear Collider

It is widely stated that the ratio of neutral Higgs field vacuum expectation values, $\tanb$, is one of the most difficult parameters to determine in either the Minimal Supersymmetric Standard Model (MSSM) or a general type-II Two-Higgs Doublet Model (2HDM). Assuming an energy and integrated luminosity of $\rts=500\gev$ and $\call=2000\fbi$, we show that a very accurate determination of $\tanb$ will often be possible using Higgs production rates and/or Higgs decays. Based on a TESLA simulation, and assuming no other light Higgs bosons and $100\leq m_A \leq 200\gev$, we find that the rate for the process $\epem\to b\anti b A \to b\anti b b\anti b$ provides an excellent determination of $\tanb$ at high $\tanb$. In the MSSM Higgs sector, the rate for $\epem\to b\anti b A+ b\anti b H \to b\anti b b\anti b$ ($\epem\to HA \to b\anti b b\anti b$) provides a good determination of $\tanb$ at high (low) $\tanb$, respectively, at moderate $m_A$ values. We also show that direct measurement of the average total width of the $H$ and $A$ in $\epem\to HA \to b\anti b b\anti b$ events provides an excellent determination of $\tanb$ at large $\tanb$.

hep-ph↗

arXiv2001

Comparison of Higgs Boson Mass and Width Determination of the LHC and a Linear Collider

Two important properties of a Higgs boson are its mass and width. They may distinguish the Standard Model (SM) Higgs boson from Higgs bosons of extended models. We show results from a direct mass and width reconstruction for a Higgs boson mass range from 120 to 340 GeV. The mass and width have been reconstructed from the H --> ZZstar --> mu+mu-mu+mu- reaction in an LHC simulation of the CMS detector. The determined mass accuracy has been compared with that obtained from studies for a linear collider (LC). The mass precision from the latter studies is derived by scaling previous LC simulation results according to the expected event rates. For the Higgs boson width we compare a direct determination with indirect methods and find good complementarity.

hep-ph↗

arXiv2001

Study of Scalar Top Quarks in the Neutralino and Chargino Decay Channel

The scalar top discovery potential has been studied with a full-statistics background simulation at sqrt(s)=500 GeV and L = 500 fb-1 for the TESLA project. The beam polarization is very important to measure the scalar top mixing angle and to determine its mass. The latest estimation of the beam polarization parameters is applied. This study includes e+ polarization, which improves the sensitivity. For a 180 GeV scalar top at minimum production cross section, we obtain delta(m) = 0.8 GeV and delta(cosT) = 0.008 in the neutralino decay channel, and delta(m) = 0.5 GeV and delta(cosT) = 0.004 in the chargino decay channel.

hep-ph↗

arXiv1999

A Direct Measurement of tan(beta): e+e- -> bb -> bbA at a Future e+e- Linear Collider

The experimental sensitivity of the reaction e+e- -> bb -> bbA has been studied with a full-statistics background simulation for sqrt(s) = 500 GeV and L = 500 fb-1. The simulation is based on a fast and realistic simulation of a TESLA detector. For the first time this reaction has been analysed for a future linear collider and we show that a signal could be observed. A significant signal over background is achieved by the application of an Iterative Discriminant Analysis (IDA). For a signal production cross section of only 2 fb, which is expected for a Higgs boson mass of 100 GeV and tan(beta) = 50, we achieve 100 signal over 100 background events, and obtain for a tan(beta) measurement: Delta(tan(beta)) / tan(beta) = 0.07. This measurement requires a high-luminosity future collider as proposed in the TESLA project.

hep-ph↗

arXiv1999

Study of Scalar Top Quarks at a Future e+e- Linear Collider

The scalar top discovery potential has been studied with a full-statistics background simulation for sqrt(s) = 500 GeV and L = 500 fb-1. The simulation is based on a fast and realistic simulation of a TESLA detector. The large simulated data sample allowed the application of an Iterative Discriminant Analysis (IDA) which led to a significantly higher sensitivity than in previous studies. The effects of beam polarization on signal efficiency and individual background channels are studied using separate optimization with the IDA for both polarization states. The beam polarization is very important to measure the scalar top mixing angle and to determine its mass. Simulating a 180 GeV scalar top at minimum production cross section, we obtain Delta(m) = 1 GeV and Delta(cos(theta)) = 0.009.

hep-ph↗

arXiv1997

Charged Higgs Boson Detector Aspects

The discovery potential for charged Higgs bosons has been studied including background simulations for sqrts = 500 GeV and a luminosity of 10 fb-1 depending on the hadronic calorimeter resolution of a LC500 detector. The hadronic decay channel H+H- --> cscs is in particular suited for this study due to a large sensitivity dependence on the hadron calorimeter performance. For this study a hadronic energy resolution as achieved at LEP experiments is sufficient to reach a very good sensitivity. A calorimeter with weaker energy resolution would reduce the sensitivity by a factor of two.

hep-ex↗

arXiv1997

Production and Decay of Stops and Sbottoms, and Determination of SUSY Parameters

We present numerical predictions for the decay branching ratios of the heavier stop and sbottom mass eigenstates. We estimate the precision to be expected for the determination of the underlying supersymmetry parameters of the stop and sbottom systems.

hep-ph↗

arXiv1997

Search of Stop, Sbottom, $τ$-Sneutrino, and Stau at an $e^+e^-$ Linear Collider with $\sqrt{s}=0.5 - 2$ TeV

We discuss pair production and decays of stops, sbottoms, $τ$-sneutrinos, and staus in $e^+e^-$ annihilation in the energy range $\sqrt{s} = 500 GeV$ to 2 TeV. Numerical predictions within the Minimal Supersymmetric Standard Model (MSSM) for cross sections and decay rates are presented. We study the stop discovery potential for $\sqrt{s} = 500 GeV$ and $10 \fb^{-1}$ integrated luminosity for polarized e^- beams. Moreover, we give an estimate of the error of the soft-breaking stop and sbottom parameters that can be obtained by cross section measurements with polarized e^- beams.

hep-ph↗

arXiv1996