arXiv subjects

A. Tünnermann

Publications and source records attributed to A. Tünnermann.

12 recordsLinked to original sources

arXiv2022

500 W rod-type 4x4 multi-core ultrafast fiber laser

We present a coherently-combined femtosecond fiber CPA system based on a rod-type, Ytterbium-doped, multicore fiber with 4x4 cores. A high average power of up to 500 W (after combination and compression) could be achieved at 10 MHz repetition rate with an excellent beam quality. Additionally, <500 fs pulses with up to 600 uJ of pulse energy were also realized with this setup. This architecture is intrinsically power scalable by increasing the number of cores in the fiber.

physics.optics↗

arXiv2021

Coherently combined 16 channel multicore fiber laser system

We present a coherently combined laser amplifier with 16 channels from a multicore fiber in a proof-of-principle demonstration. Filled aperture beam splitting and combination together with temporal phasing is realized in a compact and low-component-count setup. Combined average power of up to 70 W with 40 ps pulses are achieved with combination efficiencies around 80%.

physics.optics↗

arXiv2015

Upper Limit to the Transverse to Longitudinal Motion Coupling of a Waveguide Mirror

Waveguide mirrors possess nano-structured surfaces which can potentially provide a significant reduction in thermal noise over conventional dielectric mirrors. To avoid introducing additional phase noise from motion of the mirror transverse to the reflected light, however, they must possess a mechanism to suppress the phase effects associated with the incident light translating across the nano-structured surface. It has been shown that with carefully chosen parameters this additional phase noise can be suppressed. We present an experimental measurement of the coupling of transverse to longitudinal displacements in such a waveguide mirror designed for 1064 nm light. We place an upper limit on the level of measured transverse to longitudinal coupling of one part in seventeen thousand with 95% confidence, representing a significant improvement over a previously measured grating mirror.

astro-ph.IM↗

arXiv2014

Multi-Pulse Laser Wakefield Acceleration: A New Route to Efficient, High-Repetition-Rate Plasma Accelerators and High Flux Radiation Sources

Laser-driven plasma accelerators can generate accelerating gradients three orders of magnitude larger than radio-frequency accelerators and have achieved beam energies above 1 GeV in centimetre long stages. However, the pulse repetition rate and wall-plug efficiency of plasma accelerators is limited by the driving laser to less than approximately 1 Hz and 0.1% respectively. Here we investigate the prospects for exciting the plasma wave with trains of low-energy laser pulses rather than a single high-energy pulse. Resonantly exciting the wakefield in this way would enable the use of different technologies, such as fibre or thin-disc lasers, which are able to operate at multi-kilohertz pulse repetition rates and with wall-plug efficiencies two orders of magnitude higher than current laser systems. We outline the parameters of efficient, GeV-scale, 10-kHz plasma accelerators and show that they could drive compact X-ray sources with average photon fluxes comparable to those of third-generation light source but with significantly improved temporal resolution. Likewise FEL operation could be driven with comparable peak power but with significantly larger repetition rates than extant FELs.

physics.acc-ph↗

arXiv2012

High dispersive and monolithic 100% efficiency grisms

We present a type of grism, a series combination of transmission grating and prism, in which we reduce the number of diffraction orders and achieve a configuration with very high angular dispersion. The grism can be fabricated from a single dielectric material and requires no metallic or dielectric film layers for high transmission diffraction efficiency. One can reach 100% in the -1st transmission diffraction order and the equal damage threshold as the dielectric bulk material. We realized such an element in fused silica with an efficiency of more then 99%. The bevel backside reflection is reduced by a statistical antireflective structure, so we measured an efficiency of the entire grism of 95% at a single wavelength.

physics.optics↗

arXiv2012

Contribution of the magnetic resonance to the third harmonic generation from a fishnet metamaterial

We investigate experimentally and theoretically the third harmonic generated by a double-layer fishnet metamaterial. To unambiguously disclose most notably the influence of the magnetic resonance, the generated third harmonic was measured as a function of the angle of incidence. It is shown experimentally and numerically that when the magnetic resonance is excited by pump beam, the angular dependence of the third harmonic signal has a local maximum at an incidence angle of θ \simeq 20°. This maximum is shown to be a fingerprint of the antisymmetric distribution of currents in the gold layers. An analytical model based on the nonlinear dynamics of the electrons inside the gold shows excellent agreement with experimental and numerical results. This clearly indicates the difference in the third harmonic angular pattern at electric and magnetic resonances of the metamaterial.

physics.optics↗

arXiv2010

Asymmetric transmission of linearly polarized light at optical metamaterials

We experimentally demonstrate a three-dimensional chiral optical metamaterial that exhibits an asymmetric transmission for forwardly and backwardly propagating linearly polarized light. The observation of this novel effect requires a metamaterial composed of three-dimensional chiral metaatoms without any rotational symmetry. Our analysis is supported by a systematic investigation of the transmission matrices for arbitrarily complex, lossy media that allows deriving a simple criterion for asymmetric transmission in an arbitrary polarization base. Contrary to physical intuition, in general the polarization eigenstates in such three-dimensional and low-symmetry metamaterials do not obey fxed relations and the associated transmission matrices cannot be symmetrized.

physics.optics↗

arXiv2010

Investigation of mechanical losses of thin silicon flexures at low temperatures

The investigation of the mechanical loss of different silicon flexures in a temperature region from 5 to 300 K is presented. The flexures have been prepared by different fabrication techniques. A lowest mechanical loss of $3\times10^{-8}$ was observed for a 130 $μ$m thick flexure at around 10 K. While the mechanical loss follows the thermoelastic predictions down to 50 K a difference can be observed at lower temperatures for different surface treatments. This surface loss will be limiting for all applications using silicon based oscillators at low temperatures. The extraction of a surface loss parameter using different results from our measurements and other references is presented. We focused on structures that are relevant for gravitational wave detectors. The surface loss parameter $α_s$ = 0.5 pm was obtained. This reveals that the surface loss of silicon is significantly lower than the surface loss of fused silica.

cond-mat.mtrl-sci↗

arXiv2007

Optical coupling of fundamental whispering gallery modes in bi-spheres

What will happen if two identical microspheres, with fundamental whispering gallery modes excited in each of them, become optically coupled? Conventional wisdom based on coupled-mode arguments says that two new modes, bonding and anti-bonding, with two split frequencies would be formed. In this paper we demonstrate, using exact multi-sphere Mie theory, that in reality an attempt to couple two fundamental modes of microspheres would result in a complex multi-resonance optical response with the field distribution significantly deviating from predictions of coupled-mode type theories.

physics.optics↗

arXiv2007

Optical characterization of ultra-high diffraction efficiency gratings

We report on the optical characterization of an ultra-high diffraction efficiency grating in 1st order Littrow configuration. The apparatus used was an optical cavity built from the grating under investigation and an additional high reflection mirror. Measurement of the cavity finesse provided precise information about the grating's diffraction efficiency and its optical loss. We measured a finesse of 1580 from which we deduced a diffraction efficiency of (99.635$\pm$0.016)% and an overall optical loss due to scattering and absorption of just 0.185 %. Such high quality gratings, including the tool used for their characterization, might apply for future gravitational wave detectors. For example the demonstrated cavity itself presents an all-reflective, low-loss Fabry-Perot resonator that might replace conventional arm cavities in advanced high power Michelson interferometers.

physics.optics↗

arXiv2007

Diffractive Optics for Gravitational Wave Detectors

All-reflective interferometry based on nano-structured diffraction gratings offers new possibilities for gravitational wave detection. We investigate an all-reflective Fabry-Perot interferometer concept in 2nd order Littrow mount. The input-output relations for such a resonator are derived treating the grating coupler by means of a scattering matrix formalism. A low loss dielectric reflection grating has been designed and manufactured to test the properties of such a grating cavity.

physics.optics↗

arXiv2007

Low-loss grating for coupling to a high-finesse cavity

A concept for a low loss all-reflective cavity coupler is experimentally demonstrated at a wavelength of 1064 nm. A 1450 nm period dielectric reflection grating with a diffraction efficiency of 0.58 % in the -1st order is used in 2nd order Littrow configuration as a coupler to form a cavity with a finesse of 400. The application of such reflective low-loss cavity couplers in future generations of gravitational-wave detectors as well as some implementation issues are discussed.

physics.optics↗