arXiv subjects

A. Turner

Publications and source records attributed to A. Turner.

16 recordsLinked to original sources

arXiv2022

Training and Upgrading Tokamak Power Plants with Remountable Superconducting Magnets

All high field superconductors producing magnetic fields above 12 T are brittle. Nevertheless, they will probably be the materials of choice in commercial tokamaks because the fusion power density in a tokamak scales as the fourth power of magnetic field. Here we propose using robust, ductile superconductors during the reactor commissioning phase in order to avoid brittle magnet failure while operational safety margins are being established. Here we use the PROCESS systems code to inform development strategy and to provide detailed capital-cost-minimised tokamak power plant designs. We propose building a 'demonstrator' tokamak with an electric power output of 100 MWe, a plasma fusion gain Qplasma = 17, a net gain Qnet = 1.3, a cost of electricity (COE) of \$ 1148 (2021 US) per MWh (at 75 % availability) and high temperature superconducting operational TF magnets producing 5.4 T on-axis and 12.5 T peak-field. It uses Nb-Ti training magnets and will cost about \$ 9.75 Bn (2021 US). An equivalent 500 MWe plant has a COE of \$ 608 per MW suggesting that large tokamaks may eventually dominate the commercial market. We consider a range of designs optimised for capital cost (as the reactors considered are pilot plants) consisting of both 100 MWe and 500 MWe plants with each of two approaches for the magnets: training and upgrading. With training magnets, the plant is cost-optimised for REBCO TF magnets. For a 100 MWe plant, the Nb-Ti training magnets typically produce 70 % peak field on the toroidal field coils compared to REBCO magnets, 65 % peak field on the central solenoid and cost approx. 10 % of the total machine cost. Training magnets could in principle be reused for each of say 10 subsequent (commercial) machines and hence at 1 % bring only marginal additional cost.

physics.plasm-ph↗

arXiv2022

An Estimator for Lensing Potential from Galaxy Number Counts

We derive an estimator for the lensing potential from galaxy number counts which contains a linear and a quadratic term. We show that this estimator has a much larger signal-to-noise ratio than the corresponding estimator from intensity mapping. This is due to the additional lensing term in the number count angular power spectrum which is present already at linear order. We estimate the signal-to-noise ratio for future photometric surveys. Particularly at high redshifts, $z\gtrsim 1.5$, the signal to noise ratio can become of order 30. Therefore, the number counts in photometric surveys would be an excellent means to measure tomographic lensing spectra.

astro-ph.CO↗

arXiv2021

BICEP / Keck XIII: Improved Constraints on Primordial Gravitational Waves using Planck, WMAP, and BICEP/Keck Observations through the 2018 Observing Season

We present results from an analysis of all data taken by the BICEP2, Keck Array and BICEP3 CMB polarization experiments up to and including the 2018 observing season. We add additional Keck Array observations at 220 GHz and BICEP3 observations at 95 GHz to the previous 95/150/220 GHz data set. The $Q/U$ maps now reach depths of 2.8, 2.8 and 8.8 $μ{\mathrm K}_{cmb}$ arcmin at 95, 150 and 220 GHz respectively over an effective area of $\approx 600$ square degrees at 95 GHz and $\approx 400$ square degrees at 150 & 220 GHz. The 220 GHz maps now achieve a signal-to-noise on polarized dust emission exceeding that of Planck at 353 GHz. We take auto- and cross-spectra between these maps and publicly available WMAP and Planck maps at frequencies from 23 to 353 GHz and evaluate the joint likelihood of the spectra versus a multicomponent model of lensed-$Λ$CDM+$r$+dust+synchrotron+noise. The foreground model has seven parameters, and no longer requires a prior on the frequency spectral index of the dust emission taken from measurements on other regions of the sky. This model is an adequate description of the data at the current noise levels. The likelihood analysis yields the constraint $r_{0.05}<0.036$ at 95% confidence. Running maximum likelihood search on simulations we obtain unbiased results and find that $σ(r)=0.009$. These are the strongest constraints to date on primordial gravitational waves.

astro-ph.CO↗

arXiv2021

BICEP / Keck XV: The BICEP3 CMB Polarimeter and the First Three Year Data Set

We report on the design and performance of the BICEP3 instrument and its first three-year data set collected from 2016 to 2018. BICEP3 is a 52cm aperture, refracting telescope designed to observe the polarization of the cosmic microwave background (CMB) on degree angular scales at 95GHz. It started science observation at the South Pole in 2016 with 2400 antenna-coupled transition-edge sensor (TES) bolometers. The receiver first demonstrated new technologies such as large-diameter alumina optics, Zotefoam infrared filters, and flux-activated SQUIDs, allowing $\sim 10\times$ higher optical throughput compared to the Keck design. BICEP3 achieved instrument noise-equivalent temperatures of 9.2, 6.8 and 7.1$μ\text{K}_{\text{CMB}}\sqrt{\text{s}}$ and reached Stokes $Q$ and $U$ map depths of 5.9, 4.4 and 4.4$μ$K-arcmin in 2016, 2017 and 2018, respectively. The combined three-year data set achieved a polarization map depth of 2.8$μ$K-arcmin over an effective area of 585 square degrees, which is the deepest CMB polarization map made to date at 95GHz.

astro-ph.IM↗

arXiv2019

Clustering in $^{18}$O -- absolute determination of branching ratios via high-resolution particle spectroscopy

The determination of absolute branching ratios for high-energy states in light nuclei is an important and useful tool for probing the underlying nuclear structure of individual resonances: for example, in establishing the tendency of an excited state towards $α$-cluster structure. Difficulty arises in measuring these branching ratios due to similarities in available decay channels, such as ($\mathbf{^{18}}$O,$\mathbf{n}$) and ($\mathbf{^{18}}$O,$\mathbf{2n}$), as well as differences in geometric efficiencies due to population of bound excited levels in daughter nuclei. Methods are presented using Monte Carlo techniques to overcome these issues.

nucl-ex↗

arXiv2014

Nuclear analysis and shielding optimisation in support of the ITER In-Vessel Viewing System design

The In-Vessel Viewing System (IVVS) units proposed for ITER are deployed to perform in-vessel examination. During plasma operations, the IVVS is located beyond the vacuum vessel, with shielding blocks envisaged to protect components from neutron damage and reduce shutdown dose rate (SDR) levels. Analyses were conducted to determine the effectiveness of several shielding configurations. The neutron response of the system was assessed using global variance reduction techniques and a surface source, and shutdown dose rate calculations were undertaken using MCR2S. Unshielded, the absorbed dose to piezoelectric motors (PZT) was found to be below stable limits, however activation of the primary closure plate (PCP) was prohibitively high. A scenario with shielding blocks at probe level showed significantly reduced PCP contact dose rate, however still marginally exceeded port cell requirements. The addition of shielding blocks at the bioshield plug demonstrated PCP contact dose rates below project requirements. SDR levels in contact with the isolated IVVS cartridge were found to marginally exceed the hands-on maintenance limit. For engineering feasibility, shielding blocks at bioshield level are to be avoided, however the port cell SDR field requires further consideration. In addition, alternative low-activation steels are being considered for the IVVS cartridge.

physics.ins-det↗

arXiv2013

Improving computational efficiency of Monte-Carlo simulations with variance reduction

CCFE perform Monte-Carlo transport simulations on large and complex tokamak models such as ITER. Such simulations are challenging since streaming and deep penetration effects are equally important. In order to make such simulations tractable, both variance reduction (VR) techniques and parallel computing are used. It has been found that the application of VR techniques in such models significantly reduces the efficiency of parallel computation due to 'long histories'. VR in MCNP can be accomplished using energy-dependent weight windows. The weight window represents an 'average behaviour' of particles, and large deviations in the arriving weight of a particle give rise to extreme amounts of splitting being performed and a long history. When running on parallel clusters, a long history can have a detrimental effect on the parallel efficiency - if one process is computing the long history, the other CPUs complete their batch of histories and wait idle. Furthermore some long histories have been found to be effectively intractable. To combat this effect, CCFE has developed an adaptation of MCNP which dynamically adjusts the WW where a large weight deviation is encountered. The method effectively 'de-optimises' the WW, reducing the VR performance but this is offset by a significant increase in parallel efficiency. Testing with a simple geometry has shown the method does not bias the result. This 'long history method' has enabled CCFE to significantly improve the performance of MCNP calculations for ITER on parallel clusters, and will be beneficial for any geometry combining streaming and deep penetration effects.

physics.plasm-ph↗

arXiv2011

Design and performance of the Spider instrument

Here we describe the design and performance of the Spider instrument. Spider is a balloon-borne cosmic microwave background polarization imager that will map part of the sky at 90, 145, and 280 GHz with sub-degree resolution and high sensitivity. This paper discusses the general design principles of the instrument inserts, mechanical structures, optics, focal plane architecture, thermal architecture, and magnetic shielding of the TES sensors and SQUID multiplexer. We also describe the optical, noise, and magnetic shielding performance of the 145 GHz prototype instrument insert.

astro-ph.IM↗

arXiv2009

Antenna-coupled TES bolometer arrays for CMB polarimetry

We describe the design and performance of polarization selective antenna-coupled TES arrays that will be used in several upcoming Cosmic Microwave Background (CMB) experiments: SPIDER, BICEP-2/SPUD. The fully lithographic polarimeter arrays utilize planar phased-antennas for collimation (F/4 beam) and microstrip filters for band definition (25% bandwidth). These devices demonstrate high optical efficiency, excellent beam shapes, and well-defined spectral bands. The dual-polarization antennas provide well-matched beams and low cross polarization response, both important for high-fidelity polarization measurements. These devices have so far been developed for the 100 GHz and 150 GHz bands, two premier millimeter-wave atmospheric windows for CMB observations. In the near future, the flexible microstrip-coupled architecture can provide photon noise-limited detection for the entire frequency range of the CMBPOL mission. This paper is a summary of the progress we have made since the 2006 SPIE meeting in Orlando, FL.

astro-ph.IM↗

arXiv2008

SPIDER: A Balloon-borne Large-scale CMB Polarimeter

Spider is a balloon-borne experiment that will measure the polarization of the Cosmic Microwave Background over a large fraction of a sky at 1 degree resolution. Six monochromatic refracting millimeter-wave telescopes with large arrays of antenna-coupled transition-edge superconducting bolometers will provide system sensitivities of 4.2 and 3.1 micro K_cmb rt s at 100 and 150 GHz, respectively. A rotating half-wave plate will modulate the polarization sensitivity of each telescope, controlling systematics. Bolometer arrays operating at 225 GHz and 275 GHz will allow removal of polarized galactic foregrounds. In a 2-6 day first flight from Alice Springs, Australia in 2010, Spider will map 50% of the sky to a depth necessary to improve our knowledge of the reionization optical depth by a large factor.

astro-ph↗

arXiv2007

Spider Optimization: Probing the Systematics of a Large Scale B-Mode Experiment

Spider is a long-duration, balloon-borne polarimeter designed to measure large scale Cosmic Microwave Background (CMB) polarization with very high sensitivity and control of systematics. The instrument will map over half the sky with degree angular resolution in I, Q and U Stokes parameters, in four frequency bands from 96 to 275 GHz. Spider's ultimate goal is to detect the primordial gravity wave signal imprinted on the CMB B-mode polarization. One of the challenges in achieving this goal is the minimization of the contamination of B-modes by systematic effects. This paper explores a number of instrument systematics and observing strategies in order to optimize B-mode sensitivity. This is done by injecting realistic-amplitude, time-varying systematics in a set of simulated time-streams. Tests of the impact of detector noise characteristics, pointing jitter, payload pendulations, polarization angle offsets, beam systematics and receiver gain drifts are shown. Spider's default observing strategy is to spin continuously in azimuth, with polarization modulation achieved by either a rapidly spinning half-wave plate or a rapidly spinning gondola and a slowly stepped half-wave plate. Although the latter is more susceptible to systematics, results shown here indicate that either mode of operation can be used by Spider.

astro-ph↗

arXiv2003

The Autohumidification Polymer Electrolyte Membrane Fuel Cell

A PEM fuel cell was specially constructed to determine kinetics under conditions of well-defined gas phase composition and cell temperature. Steady state multiplicity was discovered in the autohumidification PEM fuel cell, resulting from a balance between water production and water removal. Ignition was observed in the PEM fuel cell for a critical water activity of about 0.1. Ignition is a consequence of the exponential increase of proton conductivity with water activity, which creates an autocatalytic feedback between the water production and the proton conduction. The steady state current in the ignited state decreases with increasing temperature between 50 to 105 deg C. At temperatures greater than 70 deg C five steady states were observed in the PEM fuel cell. The steady state performance has been followed with variable load resistance and hysteresis loops have been mapped. The dynamics of transitions between steady states are slow about 10^3 to 10^4 s. These slow dynamics are suggested to result from a coupling of mechanical and chemical properties of the membrane electrode assembly due to swelling of the membrane with water absorption.

physics.chem-ph↗

arXiv2002

A long hard look at MCG-6-30-15 with XMM-Newton

We present first results from a 325 ks observation of the Seyfert 1 galaxy MCG-6-30-15 with XMM-Newton and BeppoSAX. The strong, broad, skewed iron line is clearly detected and is well characterised by a steep emissivity profile within 6r_g (i.e. 6GM/c^2) and a flatter profile beyond. The inner radius of the emission appears to lie at about 2r_g, consistent with results reported from both an earlier XMM-Newton observation of MCG-6-30-15 by Wilms et al. and part of an ASCA observation by Iwasawa et al. when the source was in a lower flux state. The radius and steep emissivity profile do depend however on an assumed incident power-law continuum and a lack of complex absorption above 2.5 keV. The blue wing of the line profile is indented, either by absorption at about 6.7 keV or by a hydrogenic iron emission line. The broad iron line flux does not follow the continuum variations in a simple manner.

astro-ph↗

arXiv1999

The Extragalactic Distance Scale Key Project XVIII. The Discovery of Cepheids and a New Distance to NGC 4535 Using the Hubble Space Telescope

We report on the discovery of Cepheids in the Virgo spiral galaxy NGC 4535, based on observations made with the Wide Field and Planetary Camera 2 on board the Hubble Space Telescope. NGC 4535 is one of 18 galaxies observed as a part of The HST Key Project on the Extragalactic Distance Scale which aims to measure the Hubble constant to 10% accuracy. NGC 4535 was observed over 13 epochs using the F555W filter, and over 9 epochs using the F814W filter. The HST F555W and F814W data were transformed to the Johnson V and Kron-Cousins I magnitude systems, respectively. Photometry was performed using two independent programs, DoPHOT and DAOPHOT II/ALLFRAME. Period-luminosity relations in the V and I bands were constructed using 39 high-quality Cepheids present in our set of 50 variable candidates. We obtain a distance modulus of 31.02+/-0.26 mag, corresponding to a distance of 16.0+/-1.9 Mpc. Our distance estimate is based on values of mu = 18.50 +/- 0.10 mag and E(V-I) = 0.13 mag for the distance modulus and reddening of the LMC, respectively.

astro-ph↗

arXiv1998

The HST Key Project on the Extragalactic Distance Scale XIV. The Cepheids in NGC 1365

We report the detection of Cepheid variable stars in the barred spiral galaxy NGC 1365, located in the Fornax cluster, using the Hubble Space Telescope Wide Field and Planetary Camera 2. Twelve V (F555W) and four I (F814W) epochs of observation were obtained. The two photometry packages, ALLFRAME and DoPHOT, were separately used to obtain profile-fitting photometry of all the stars in the HST field. The search for Cepheid variable stars resulted in a sample of 52 variables, with periods between 14 and 60 days, in common with both datasets. ALLFRAME photometry and light curves of the Cepheids are presented. A subset of 34 Cepheids were selected on the basis of period, light curve shape, similar ALLFRAME and DoPHOT periods, color, and relative crowding, to fit the Cepheid period-luminosity relations in V and I for both ALLFRAME and DoPHOT. The measured distance modulus to NGC 1365 from the ALLFRAME photometry is 31.31 +/- 0.20 (random) +/- 0.18 (systematic) mag, corresponding to a distance of 18.3 +/- 1.7 (random) +/- 1.6 (systematic) Mpc. The reddening is measured to be E(V-I) = 0.16 +/- 0.08 mag. These values are in excellent agreement with those obtained using the DoPHOT photometry, namely a distance modulus of 31.26 +/- 0.10 mag, and a reddening of 0.15 +/- 0.10 mag (internal errors only).

astro-ph↗

arXiv1997

The HST Key Project on the Extragalactic Distance Scale XIII. The Metallicity Dependence of the Cepheid Distance Scale

Uncertainty in the metal abundance dependence of the Cepheid variable period- luminosity (PL) relation remains one of the outstanding sources of systematic error in the extragalactic distance scale and Hubble constant. To test for such a metallicity dependence, we have used the WFPC2 camera on the Hubble Space Telescope (HST) to observe Cepheids in two fields in the nearby spiral galaxy M101, which span a range in oxygen abundance of 0.7+-0.15 dex. A differential analysis of the PL relations in V and I in the two fields yields a marginally significant change in the inferred distance modulus on metal abundance, with d(m-M)/d[O/H] = -0.24+-0.16 mag/dex. The trend is in the theoretically predicted sense that metal-rich Cepheids appear brighter and closer than metal-poor stars. External comparisons of Cepheid distances with those derived from three other distance indicators, in particular the tip of the red giant branch method, further constrain the magnitude of any Z-dependence of the PL relation at V and I. The overall effects of any metallicity dependence on the distance scale derived with HST will be of the order of a few percent or less for most applications, though distances to individual galaxies at the extremes of the metal abundance range may be affected at the 10% level.

astro-ph↗