Searcharxiv⌕ Search

arXiv subjects

A. Ushakov

Publications and source records attributed to A. Ushakov.

15 recordsLinked to original sources
arXiv2026

First investigation of $^{96}$Zr samples enriched by the gas-centrifuge method for the use in rare-decay studies

For the first time, the isotope $^{96}$Zr has been produced by the gas-centrifuge method (enrichment is 88.28% and full mass of $^{96}$Zr is 179.816 g). The level of radionuclide impurities of the samples and thus their suitability for rare-event search have been investigated using three low-background HPGe detectors. The most stringent limit, obtained at sea level, on the half-life of the double beta decay of $^{96}$Zr to the $0^+_1$ excited state (1148 keV) of $^{96}$Mo has been set $T_{1/2}(0\nu+2\nu)>3.9 \times 10^{19}$ yr (90% C.L.).

nucl-ex↗
arXiv2026

Orbital-specific Itinerancy and Localization in a Kagome Magnet

The kagome lattice naturally hosts flat bands, Dirac fermions, and van Hove singularities, yet whether its geometry can stabilize orbital-selective phases - a hallmark of Hund's physics in multi-orbital correlated systems - has remained an open question. Here, we combine resonant inelastic X-ray scattering with density functional theory and dynamical mean-field theory to demonstrate that YMn$_6$Sn$_6$ exhibits a spontaneous orbital differentiation into coexisting itinerant and localized electrons within the same Mn $3d$ manifold. Orbitals directed along Mn-Mn bonds provide coherent quasiparticles and metallic bands, while those pointing toward ligands become strongly correlated and display non-Fermi-liquid behavior. Hund's intra-atomic exchange suppresses orbital fluctuations, stabilizing this dichotomy and providing a natural double-exchange-like mechanism for the observed ferromagnetic bilayer coupling. Our work establishes YMn$_6$Sn$_6$ as a kagome platform where orbital selectivity, flat-band topology, and Hund's metallicity converge - revealing that geometric frustration and correlation-driven orbital differentiation can cooperatively design exotic quantum phases beyond the canonical paradigms of Mott physics or band topology alone.

cond-mat.str-el↗
arXiv2023

Positron Beams At Ce$^+$BAF

We present a scheme for the generation of a high polarization positron beam with continous wave (CW) bunch structure for the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Laboratory (JLab). The positrons are created in a high average power conversion target and collected by a CW capture linac and DC solenoid.

physics.acc-ph↗
arXiv2023

Evaluation of a High-Power Target Design for Positron Production at CEBAF

A source for polarized positron beams at the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab is being designed. The Polarized Electrons for Polarized Positrons (PEPPo) concept is used to produce polarized e$^+$e$^-$-pairs from the bremsstrahlung radiation of a longitudinally polarized electron beam interacting within a high-$Z$ conversion target. The scheme under consideration includes a 4 mm thick tungsten target that absorbs 17 kW deposited by a 1 mA continuous-wave electron beam with an energy of 120 MeV. The concept of a rotating tungsten rim mounted on a water-cooled copper disk was explored. The results of ANSYS thermal and mechanical analyses are discussed together with FLUKA evaluations of the radiation damages.

physics.acc-ph↗
arXiv2022

Positron sources: from conventional to advanced accelerator concepts-based colliders

Positron sources are the key elements for the future and current lepton collider projects such as ILC, CLIC, SuperKEKB, FCC-ee, Muon Collider/LEMMA, etc., introducing challenging critical requirements for high intensity and low emittance beams in order to achieve high luminosity. In fact, due to their large production emittance and constraints given by the target thermal load, the main collider parameters such as the peak and average current, the emittances, the damping time, the repetition frequency and consequently the luminosity are determined by the positron beam characteristics. In this paper, the conventional positron sources and their main properties are explored for giving an indication to the challenges that apply during the design of the advanced accelerator concepts. The photon-driven positron sources as the novel approach proposed, primarily for the future linear colliders, are described highlighting their variety and problematic.

physics.acc-ph↗
arXiv2021

Multiple field-induced phases in the frustrated triangular magnet Cs$_3$Fe$_2$Br$_9$

The recently discovered material Cs$_3$Fe$_2$Br$_9$ contains Fe$_2$Br$_9$ bi-octahedra forming triangular layers with hexagonal stacking along the $c$ axis. In contrast to isostructural Cr-based compounds, the zero-field ground state is not a nonmagnetic $S=0$ singlet-dimer state. Instead, the Fe$_2$Br$_9$ bi-octahedra host semiclassical $S=5/2$ Fe$^{3+}$ spins with a pronounced easy-axis anisotropy along $c$ and interestingly, the intra-dimer spins are ordered ferromagnetically. The high degree of magnetic frustration due to (various) competing intra- and inter-dimer couplings leads to a surprisingly rich magnetic phase diagram. Already the zero-field ground state is reached via an intermediate phase, and the high-field magnetization and thermal expansion data for $H\parallel c$ identify ten different ordered phases. Among them are phases with constant magnetization of 1/3, respectively 1/2 of the saturation value, and several transitions are strongly hysteretic with pronounced length changes reflecting strong magnetoelastic coupling.

cond-mat.str-el↗
arXiv2016

Design of Pre-Dumping Ring Spin Rotator with a Possibility of Helicity Switching for Polarized Positrons at the ILC

The use of polarized beams enhance the possibility of the precision measurements at the International Linear Collider (ILC). In order to preserve the degree of polarization during beam transport spin rotators are included in the current TDR ILC Lattice. In this report some advantages of using a combined spin rotator/spin flipper are discussed. A few possible lattice designs of spin flipper developed at DESY in 2012 are presented.

physics.acc-ph↗
arXiv2014

Photon collimator system for the ILC Positron Source

High energy e+e- linear colliders are the next large scale project in particle physics. They need intense sources to achieve the required luminosity. In particular, the positron source must provide about 10E+14 positrons per second. The positron source for the International Linear Collider (ILC) is based on a helical undulator passed by the electron beam to create an intense circularly polarized photon beam. With these photons a longitudinally polarized positron beam is generated; the degree of polarization can be enhanced by collimating the photon beam. However, the high photon beam intensity causes huge thermal load in the collimator material. In this paper the thermal load in the photon collimator is discussed and a flexible design solution is presented.

physics.acc-ph↗
arXiv2012

Heat Load and Stress Studies for an Design of the Photon Collimator for the ILC Positron Source

The ILC baseline design for the positron source is based on radiation from a helical undulator to produce positrons in a thin target. Since the photon beam created in the helical undulator is circularly polarized, the generated positron beam is longitudinally polarized. Using a photon collimator upstream the positron target the positron polarization can be enhanced. However, the photon beam intensity yields a huge thermal load in the collimator material. In this paper the thermal load and heat dissipation in the photon collimator is discussed and design solutions are suggested.

physics.acc-ph↗
arXiv2012

Spin Tracking at the ILC Positron Source

In order to achieve the physics goals of future Linear Colliders, it is important that electron and positron beams are polarized. The baseline design at the International Linear Collider (ILC) foresees an e+ source based on helical undulator. Such a source provides high luminosity and polarizations. The positron source planned for ILC is based on a helical undulator system and can deliver a positron polarization of 60%. To ensure that no significant polarization is lost during the transport of the e- and e+ beams from the source to the interaction region, precise spin tracking has to be included in all transport elements which can contribute to a loss of polarization, i.e. the initial accelerating structures, the damping rings, the spin rotators, the main linac and the beam delivery system. In particular, the dynamics of the polarized positron beam is required to be investigated. In the talk recent results of positron spin tracking simulation at the source are presented. The positron yield and polarization are also discussed depending on the geometry of source elements.

physics.acc-ph↗
arXiv2012

Polarized positrons for the ILC - update on simulations

To achieve the extremely high luminosity for colliding electron-positron beams at the future International Linear Collider (ILC) an undulator-based source with about 230 meters helical undulator and a thin titanium-alloy target rim rotated with tangential velocity of about 100 meters per second are foreseen. The very high density of heat deposited in the target has to be analyzed carefully. The energy deposited by the photon beam in the target has been calculated in FLUKA. The resulting stress in the target material after one bunch train has been simulated in ANSYS.

physics.acc-ph↗
arXiv2009

Beam Polarization at the ILC: the Physics Impact and the Accelerator Solutions

In this contribution accelerator solutions for polarized beams and their impact on physics measurements are discussed. Focus are physics requirements for precision polarimetry near the interaction point and their realization with polarized sources. Based on the ILC baseline programme as described in the Reference Design Report (RDR), recent developments are discussed and evaluated taking into account physics runs at beam energies between 100 GeV and 250 GeV, as well as calibration runs on the Z-pole and options as the 1TeV upgrade and GigaZ.

physics.acc-ph↗
arXiv2008

The Word and Geodesic Problems in Free Solvable Groups

We study the computational complexity of the Word Problem (WP) in free solvable groups $S_{r,d}$, where $r \geq 2$ is the rank and $d \geq 2$ is the solvability class of the group. It is known that the Magnus embedding of $S_{r,d}$ into matrices provides a polynomial time decision algorithm for WP in a fixed group $S_{r,d}$. Unfortunately, the degree of the polynomial grows together with $d$, so the uniform algorithm is not polynomial in $d$. In this paper we show that WP has time complexity $O(r n \log_2 n)$ in $S_{r,2}$, and $O(n^3 r d)$ in $S_{r,d}$ for $d \geq 3$. However, it turns out, that a seemingly close problem of computing the geodesic length of elements in $S_{r,2}$ is $NP$-complete. We prove also that one can compute Fox derivatives of elements from $S_{r,d}$ in time $O(n^3 r d)$, in particular one can use efficiently the Magnus embedding in computations with free solvable groups. Our approach is based on such classical tools as the Magnus embedding and Fox calculus, as well as, on a relatively new geometric ideas, in particular, we establish a direct link between Fox derivatives and geometric flows on Cayley graphs.

math.GR↗
arXiv2008

Challenge of polarized beams at future colliders

A short overview about the potential of polarized beams at future colliders is given. In particular the baseline design for polarized beams at the ILC is presented and the physics case for polarized $e^-$ and $e^+$ is discussed. In order to fulfil the precision requirements spin tracking from the source to the interaction point is needed. Updates concerning the theoretical calculations as well as their implementation in simulation codes are reported.

hep-ph↗