arXiv subjects

A. V. Mokshin

Publications and source records attributed to A. V. Mokshin.

17 recordsLinked to original sources

arXiv2023

A Unified Empirical Equation for Determining the Mechanical Properties of Porous NiTi Alloy: From Nanoporosity to Microporosity

The mechanical characteristics of a monolithic (non-porous) crystalline or amorphous material are described by a well-defined set of quantities. It is possible to change the mechanical properties by introducing porosity into this material: as a rule, the strength values decrease with the introduction of porosity. Thus, porosity can be considered as an additional degree of freedom that can be used to influence the hardness, strength and plasticity of the material. In the present work, using porous crystalline NiTi as an example, it is shown that the mechanical characteristics such as the Young's modulus, the yield strength, the ultimate tensile strength, etc. demonstrate a pronounced dependence on the average linear size $\bar{l}$ of the pores. For the first time, an empirical equation is proposed that correctly reproduces the dependence of the mechanical characteristics on the porosity $ϕ$ and on the average linear size $\bar{l}$ of the pores in a wide range of sizes: from nano-sized pores to pores of a few hundred microns in size. This equation correctly takes into account the limit case corresponding to the monolithic material. The obtained results can be used directly to solve applied problems associated with the design of materials with the necessary combination of physical and mechanical characteristics, in particular, porous metallic biomaterials.

cond-mat.mtrl-sci↗

arXiv2023

Machine learning-based prediction of elastic properties of amorphous metal alloys

The Young's modulus $E$ is the key mechanical property that determines the resistance of solids to tension/compression. In the present work, the correlation of the quantity $E$ with such characteristics as the total molar mass $M$ of alloy components, the number of components $n$ forming an alloy, the yield stress $σ_{y}$ and the glass transition temperature $T_{g}$ has been studied in detail based on a large set of empirical data for the Young's modulus of different amorphous metal alloys. It has been established that the values of the Young's modulus of metal alloys under normal conditions correlate with such a mechanical characteristic as the yield stress as well as with the glass transition temperature. As found, the specificity of the ``chemical formula'' of alloy, which is determined by molar mass $M$ and number of components $n$, does not affect on elasticity of the material. The machine learning algorithm identified both the quantities $M$ and $n$ as insignificant factors in determining $E$. A simple non-linear regression model is obtained that relates the Young's modulus with $T_{g}$ and $σ_{y}$, and this model correctly reproduces the experimental data for metal alloys of different types. This obtained regression model generalizes the previously presented empirical relation $E\simeq49.8σ_{y}$ for amorphous metal alloys.

cond-mat.mtrl-sci↗

arXiv2023

Quasi-Stable Structures in Equilibrium Dense Bismuth Melt: Experimental and First Principles Theoretical Studies

Near the melting temperature, equilibrium bismuth melt is characterized by structural features that are absent in equilibrium monatomic simple liquids. In the present work, the structure of bismuth melt is studied by X-ray diffraction experiments and quantum chemical calculations. The presence of quasi-stable structures in the melt has been found, the lifetime of which exceeds the structural relaxation time of this melt. It is shown that these structures are characterized by a low degree of ordering and spatial localisation. It was found that up to $50$\% of the atoms in the melt can be involved in the formation of these structures. The elementary structural units of these structures are triplets of regular geometry with the characteristic lengths $3.25$ Å~and $4.7$ Å~as well as with the characteristic angles $45^{\circ}$ and $90^{\circ}$. The characteristic lengths of these triplets are fully consistent with correlation lengths associated with the short-range order in bismuth melt.

cond-mat.mtrl-sci↗

arXiv2023

Neural network as a tool for design of amorphous metal alloys with desired elastoplastic properties

The development and implementation of the methods for designing amorphous metal alloys with desired mechanical properties is one of the most promising areas of modern materials science. Here, the machine learning methods appear to be a suitable complement to empirical methods related to the synthesis and testing of amorphous alloys of various compositions. In the present work, it is proposed a method to determine amorphous metal alloys with mechanical properties closest to those required. More than $50\,000$ amorphous alloys of different compositions have been considered, and the Young's modulus $E$ and the yield strength $σ_{y}$ have been evaluated for them by the machine learning model trained on the fundamental physical properties of the chemical elements. Statistical treatment of the obtained results reveals that the fundamental physical properties of the chemical element with the largest mass fraction are the most significant factors, whose values correlate with the values of the mechanical properties of the alloys, in which this element is involved. It is shown that the values of the Young's modulus $E$ and the yield strength $σ_{y}$ are higher for amorphous alloys based on Cr, Fe, Co, Ni, Nb, Mo and W formed by the addition of semimetals (e.g. Be, B, Al, Sn), nonmetals (e.g. Si and P) and lanthanides (e.g. La and Gd) than for alloys of other compositions. Increasing the number of components in alloy from $2$ to $7$ and changing the mass fraction of chemical elements has no significantly impact on the strength characteristics $E$ and $σ_{y}$. Amorphous metal alloys with the most improved mechanical properties have been identified. In particular, such extremely high-strength alloys include Cr$_{80}$B$_{20}$ (among binary), Mo$_{60}$B$_{20}$W$_{20}$ (among ternary) and Cr$_{40}$B$_{20}$Nb$_{10}$Pd$_{10}$Ta$_{10}$Si$_{10}$ (among multicomponent).

cond-mat.mtrl-sci↗

arXiv2022

Unusual effect of high pressures on phase transformations in Ni$_{62}$Nb$_{38}$ alloy

Binary Ni$_{62}$Nb$_{38}$ alloy belongs to the unique class of binary off-eutectic systems, which are able to form a bulk glassy state [L. Xia et al., J. Appl. Phys. 99 (2006) 026103]. In the present work, the ($p$, $T$) phase diagram of Ni$_{62}$Nb$_{38}$ alloy was first determined for a wide thermodynamic range with temperatures from $300$\,K to $6000$\,K and with pressures from $1$\,atm to $1.2\times10^7$\,atm. For this thermodynamic range, elements of the phase diagram such as the liquid-crystal coexistence line and the glass transition line are defined. Our results reveal good agreement between the simulation results and the known experimental values of the liquidus temperature and the glass transition temperature for the isobar $p=1$\,atm. The phase diagram is detailed for pressures greater than $1\times10^{7}$\,atm. For the first time, the phase separation conditions at which the liquid Nb and crystalline Ni phases coexist in the system were determined.

cond-mat.mtrl-sci↗

arXiv2022

Cavity nucleation in single-component homogeneous amorphous solids under negative pressure

Understanding the cavity formation and cavity growth mechanisms in solids has fundamental and applied importance for the correct determination of their exploitation capabilities and mechanical characteristics. In this work, we present the molecular dynamics simulation results for the process of homogeneous formation of nanosized cavities in a single-component amorphous metallic alloy. To identify cavities of various shapes and sizes, an original method has been developed, which is based on filling cavities by virtual particles (balls) of the same diameter. By means of the mean first-passage time analysis, it was shown that the cavity formation in an amorphous metallic melt is the activation-type process. This process can be described in terms of the classical nucleation theory, which is usually applied to the case of first order phase transitions. Activation energy, critical size and nucleation rate of cavities are calculated, the values of which are comparable with those for the case of crystal nucleation in amorphous systems.

cond-mat.soft↗

arXiv2022

Porous amorphous nitinol synthesized by argon injection: a molecular dynamics study

Porous crystalline nitinol is widely applied in various fields of science and technology due to the unique combination of physical and mechanical properties as well as biocompatibility. Porous amorphous nitinol is characterized by improved mechanical properties compared to its crystalline analogues. Moreover, this material is more promising from the point of view of fundamental study and practical application. The production of porous amorphous nitinol is a difficult task requiring rapid cooling protocol and optimal conditions to form a stable porous structure. In the present work, based on the results of molecular dynamics simulations, we show that porous nitinol with the amorphous matrix can be obtained by injection of argon into a liquid melt followed by rapid cooling of the resulting mixture. We find that the porosity of the system increases exponentially with increasing fraction of injected argon. It has been established that the system should contain about $\sim18$--$23$\% argon for obtain an open porous structure, while the system is destroyed by overheated inert gas when the argon fraction is more than $\sim23$\%. It is shown that the method of argon injection makes it possible to obtain a highly porous system with the porosity $\sim70$\% consisting the spongy porous structure similar to aerogels and metallic foams.

cond-mat.mtrl-sci↗

arXiv2022

Kinetics of inherent processes counteracting crystallization in supercooled monatomic liquid

Crystallization of supercooled liquids is mainly determined by two competing processes associated with the transition of particles (atoms) from liquid phase to crystalline one and, vice versa, with the return of particles from crystalline phase to liquid one. The quantitative characteristics of these processes are the so-called attachment rate $g^{+}$ and the detachment rate $g^{-}$, which determine how particles change their belonging from one phase to another. In the present study, a {\it correspondence rule} between the rates $g^{+}$ and $g^{-}$ as functions of the size $N$ of growing crystalline nuclei is defined for the first time. In contrast to the well-known detailed balance condition, which relates $g^{+}(N)$ and $g^{-}(N)$ at $N=n_c$ (where $n_c$ is the critical nucleus size) and is satisfied only at the beginning of the nucleation regime, the found {\it correspondence rule} is fulfilled at all the main stages of crystallization kinetics (crystal nucleation, growth and coalescence). On the example of crystallizing supercooled Lennard-Jones liquid, the rate $g^{-}$ was calculated for the first time at different supercooling levels and for the wide range of nucleus sizes $N\in[n_c;\,40\,n_c]$. It was found that for the whole range of nucleus sizes, the detachment rate $g^{-}$ is only $\approx2$\% less than the attachment rate $g^{+}$. This is direct evidence that the role of the processes that counteract crystallization remains significant at all the stages of crystallization. Based on the obtained results, a kinetic equation was formulated for the time-dependent distribution function of the nucleus sizes, that is an alternative to the well-known kinetic Becker-Döring-Zeldovich-Frenkel equation.

cond-mat.soft↗

arXiv2021

Quasi-solid state microscopic dynamics in equilibrium classical liquids: Self-consisnent relaxation theory

In the framework of the concept of time correlation functions, we develop a self-consistent relaxation theory of the transverse collective particle dynamics in liquids. The theory agrees with well-known results in both the short-wave (free particle dynamics) and the long-wave (hydrodynamic) limits. We obtain a general expression for the spectral density~$C_T(k,ω)$ of transverse particle current realized in the range of wave numbers $k$. In domain of microscopic spatial scales comparable to action scale of effective forces of interparticle interaction, the theory reproduces a transition from a regime with typical equilibrium liquid dynamics to a regime with collective particle dynamics where properties similar to solid-state properties appear: effective shear stiffness and transverse (shear) acoustic waves. In the framework of the corresponding approximations, we obtain expressions for the spectral density of transverse particle current for all characteristic regimes in equilibrium collective dynamics. We obtain expressions for dispersion law for transverse (shear) acoustic waves and also relations for the kinematic shear viscosity $ν$, the transverse speed of sound $v^{(T)}$, and the corresponding sound damping coefficient $Γ^{(T)}$. We compare the theoretical results with the results of atomic dynamics simulations of liquid lithium near the melting point.

cond-mat.soft↗

arXiv2020

Viscous Properties of Nickel-Containing Binary Metal Melts

The paper presents the results of molecular dynamics study of the viscosity of nickel-containing binary metal melts for a wide range of temperatures, including the region of the equilibrium liquid phase and supercooled melt. It is shown that the temperature dependencies of the viscosity of binary metal melts are described by the Kelton's quasi-universal model. Based on the analysis of the viscosity coefficient of the binary melt composition within the framework of the Rosenfeld's scale transfor\-mations, it has been established that to correctly describe the viscosity of binary/multi\-component metal melts within the framework of entropy models, it is necessary to use a more complex representation of the excess entropy $S_{ex}$ than in the approximation of pair correlation entropy $S_2$.

cond-mat.mtrl-sci↗

arXiv2020

Electrocrystallization of Supercooled Water in Confinement

The paper discusses the features of supercooled water thin film of width $d=3.97$~nm contained by the perfect graphene layers and crystallizing under external stationary electric field. It was found that the electric field applied perpendicular to graphene layers impedes structural ordering, while the electric field applied in lateral direction contributes to formation of the cubic ice ($Ic$) phase, which is thermodynamically less stable compared to the hexagonal ice ($Ih$) phase. It is shown that the growth of the $Ic$ crystalline phase occurs without formation of intermediate crystalline phases. It was found that the crystallization rate depends strongly on the magnitude of the applied electric field. In particular, the processes of full electrocrystallization of the system do not appear over simulation time scale ($\sim 40$~ns) if the electric field of the magnitude less than $0.07~\rm{V/Å}$ is applied.

cond-mat.mtrl-sci↗

arXiv2019

The nature of collective excitations and their crossover at extreme supercritical conditions

Physical properties of an interacting system are governed by collective excitations, but their nature at extreme supercritical conditions is unknown. Here, we present direct evidence for propagating solid-like longitudinal phonon-like excitations with wavelengths extending to interatomic separations deep in the supercritical state at temperatures up to 3,300 times the critical temperature. We observe that the crossover of dispersion curves develops at $k$ points reducing with temperature. We interpret this effect as the crossover from the collective phonon to the collisional mean-free path regime of particle dynamics and find that the crossover points are close to both the inverse of the shortest available wavelength in the system and to the particle mean free path inferred from experiments and theory. Notably, both the shortest wavelength and mean free path scale with temperature with the same power law, lending further support to our findings.

cond-mat.stat-mech↗

arXiv2018

Viscosity of Cobalt Melt: Experiment, Simulation, and Theory

The results of experimental measurements, molecular dynamics simulation, and theoretical calculations of the viscosity of a cobalt melt in a temperature range of $1400-2000$~K at a pressure $p=1.5$~bar corresponding to an overcooled melt at temperatures of $1400-1768$~K and an equilibrium melt with temperatures from the range $1768-2000$~K are presented. Theoretical expressions for the spectral density of the time-dependent correlation function of the stress tensor $\tilde{S}(ω)$ and kinematic viscosity $ν$ determined from the frequency and thermodynamic parameters of the system are obtained. The temperature dependences of the kinematic viscosity for the cobalt melt are determined experimentally by the torsional oscillation method; numerically, based on molecular simulation data with the EAM potential via subsequent analysis of the time correlation functions of the transverse current in the framework of generalized hydrodynamics; and by the integral Kubo-Green relation; they were also determined theoretically with the Zwanzig-Mori memory functions formalism using a self-consistent approach. Good agreement was found between the results of theoretical calculations for the temperature dependence of the kinematic viscosity of the cobalt melt using experimental data and the molecular dynamics simulation results. From an analysis of the temperature dependence of the viscosity, we obtain an activation energy of $E=(5.38\pm0.02)\times10^{-20}$~J.

cond-mat.mtrl-sci↗

arXiv2018

Viscosity and Structure Configuration Properties of Equilibrium and Supercooled Liquid Cobalt

The shear viscosity of liquid cobalt at the pressure $p=1.5$~bar and at the temperatures corresponding to equilibrium liquid and supercooled liquid states is measured experimentally and evaluated by means of molecular dynamics simulations. Further, the shear viscosity is also calculated within the microscopic theoretical model. Comparison of our experimental, simulation and theoretical results with other available data allows one to examine the issue about the correct temperature dependence of the shear viscosity of liquid cobalt. It is found a strong correlation between the viscosity and the configuration entropy of liquid cobalt over the considered temperature range, which can be taken into account by the Rosenfeld's model.

cond-mat.mtrl-sci↗

arXiv2015

Pade spectroscopy of structural correlation functions: application to liquid gallium

We propose the new method of fluid structure investigation which is based on numerical analytical continuation of structural correlation functions with Pade approximants. The method particularly allows extracting hidden structural features of non-ordered condensed matter systems from experimental diffraction data. The method has been applied to investigating the local order of liquid gallium which has non-trivial stricture in both the liquid and solid states. Processing the correlation functions obtained from molecular dynamic simulations, we show the method proposed reveals non-trivial structural features of liquid gallium such as the spectrum of length-scales and the existence of different types of local clusters in the liquid.

cond-mat.mtrl-sci↗

arXiv2006

Analysis of the Dynamics of Liquid Aluminium: Recurrent Relation Approach

By use of the recurrent relation approach (RRA) we study the microscopic dynamics of liquid aluminium at T=973 K and develop a theoretical model which satisfies all the corresponding sum rules. The investigation covers the inelastic features as well as the crossover of our theory into the hydrodynamical and the free-particle regimes. A comparison between our theoretical results with those following from a generalized hydrodynamical approach is also presented. In addition to this we report the results of our molecular dynamics simulations for liquid aluminium, which are also discussed and compared to experimental data. The received results reveal that (i) the microscopical dynamics of density fluctuations is defined mainly by the first four even frequency moments of the dynamic structure factor, and (ii) the inherent relation of the high-frequency collective excitations observed in experimental spectra of dynamic structure factor $S(k,ω)$ with the two-, three- and four-particle correlations.

cond-mat.dis-nn↗

arXiv2001

Time-scale invariance of relaxation processes of density fluctuation in slow neutron scattering in liquid cesium

The realization of idea of time-scale invariance for relaxation processes in liquids has been performed by the memory functions formalism. The best agreement with experimental data for the dynamic structure factor $S(k,ω)$ of liquid cesium near melting point in the range of wave vectors ($0.4 \ang^{-1} \leq k \leq 2.55 \ang^{-1}$) is found with the assumption of concurrence of relaxation scales for memory functions of third and fourth orders. Spatial dispersion of the four first points in spectrum of statistical parameter of non-Markovity $ ε_{i}(k,ω)$ at $i=1,2,3,4$ has allowed to reveal the non-Markov nature of collective excitations in liquid cesium, connected with long-range memory effect.

cond-mat.stat-mech↗