arXiv subjects

A. Wallraff

Publications and source records attributed to A. Wallraff.

At least 19 recordsLinked to original sources

arXiv2022

Magnetic imaging of superconducting qubit devices with scanning SQUID-on-tip

We use a scanning superconducting quantum interference device (SQUID) to image the magnetic flux produced by a superconducting device designed for quantum computing. The nanometer-scale SQUID-on-tip probe reveals the flow of superconducting current through the circuit as well as the locations of trapped magnetic flux. In particular, maps of current flowing out of a flux-control line in the vicinity of a qubit show how these elements are coupled, providing insight on how to optimize qubit control.

cond-mat.supr-con↗

arXiv2021

In-situ Tuning of the Electric Dipole Strength of a Double Dot Charge Qubit: Charge Noise Protection and Ultra Strong Coupling

Semiconductor quantum dots, where electrons or holes are isolated via electrostatic potentials generated by surface gates, are promising building blocks for semiconductor-based quantum technology. Here, we investigate double quantum dot (DQD) charge qubits in GaAs, capacitively coupled to high-impedance SQUID array and Josephson junction array resonators. We tune the strength of the electric dipole interaction between the qubit and the resonator in-situ using surface gates. We characterize the qubit-resonator coupling strength, qubit decoherence, and detuning noise affecting the charge qubit for different electrostatic DQD configurations. We find that all quantities can be tuned systematically over more than one order of magnitude, resulting in reproducible decoherence rates $Γ_2/2π<~5$ MHz in the limit of high interdot capacitance. Conversely, by reducing the interdot capacitance, we can increase the DQD electric dipole strength, and therefore its coupling to the resonator. By employing a Josephson junction array resonator with an impedance of $\sim4$ k$Ω$ and a resonance frequency of $ω_r/2π\sim 5.6$ GHz, we observe a coupling strength of $g/2π\sim 630$ MHz, demonstrating the possibility to achieve the ultrastrong coupling regime (USC) for electrons hosted in a semiconductor DQD. These results are essential for further increasing the coherence of quantum dot based qubits and investigating USC physics in semiconducting QDs.

cond-mat.mes-hall↗

arXiv2020

Demonstration of an All-Microwave Controlled-Phase Gate between Far Detuned Qubits

A challenge in building large-scale superconducting quantum processors is to find the right balance between coherence, qubit addressability, qubit-qubit coupling strength, circuit complexity and the number of required control lines. Leading all-microwave approaches for coupling two qubits require comparatively few control lines and benefit from high coherence but suffer from frequency crowding and limited addressability in multi-qubit settings. Here, we overcome these limitations by realizing an all-microwave controlled-phase gate between two transversely coupled transmon qubits which are far detuned compared to the qubit anharmonicity. The gate is activated by applying a single, strong microwave tone to one of the qubits, inducing a coupling between the two-qubit $|f,g\rangle$ and $|g,e\rangle$ states, with $|g\rangle$, $|e\rangle$, and $|f\rangle$ denoting the lowest energy states of a transmon qubit. Interleaved randomized benchmarking yields a gate fidelity of $97.5\pm 0.3 \%$ at a gate duration of $126\,\rm{ns}$, with the dominant error source being decoherence. We model the gate in presence of the strong drive field using Floquet theory and find good agreement with our data. Our gate constitutes a promising alternative to present two-qubit gates and could have hardware scaling advantages in large-scale quantum processors as it neither requires additional drive lines nor tunable couplers.

quant-ph↗

arXiv2020

Benchmarking Coherent Errors in Controlled-Phase Gates due to Spectator Qubits

A major challenge in operating multi-qubit quantum processors is to mitigate multi-qubit coherent errors. For superconducting circuits, besides crosstalk originating from imperfect isolation of control lines, dispersive coupling between qubits is a major source of multi-qubit coherent errors. We benchmark phase errors in a controlled-phase gate due to dispersive coupling of either of the qubits involved in the gate to one or more spectator qubits. We measure the associated gate infidelity using quantum process tomography. In addition, we point out that, due to coupling of the gate qubits to a non-computational state during the gate, two-qubit conditional phase errors are enhanced. Our work is important for understanding limits to the fidelity of two-qubit gates with finite on/off ratio in multi-qubit settings.

quant-ph↗

arXiv2019

Coherent long-distance spin-qubit-transmon coupling

Spin qubits and superconducting qubits are among the promising candidates for a solid state quantum computer. For the implementation of a hybrid architecture which can profit from the advantages of either world, a coherent long-distance link is necessary that integrates and couples both qubit types on the same chip. We realize such a link with a frequency-tunable high impedance SQUID array resonator. The spin qubit is a resonant exchange qubit hosted in a GaAs triple quantum dot. It can be operated at zero magnetic field, allowing it to coexist with superconducting qubits on the same chip. We find a working point for the spin qubit, where the ratio between its coupling strength and decoherence rate is optimized. We observe coherent interaction between the resonant exchange qubit and a transmon qubit in both resonant and dispersive regimes, where the interaction is mediated either by real or virtual resonator photons.

cond-mat.mes-hall↗

arXiv2018

Challenging local realism with human choices

A Bell test is a randomized trial that compares experimental observations against the philosophical worldview of local realism. A Bell test requires spatially distributed entanglement, fast and high-efficiency detection and unpredictable measurement settings. Although technology can satisfy the first two of these requirements, the use of physical devices to choose settings in a Bell test involves making assumptions about the physics that one aims to test. Bell himself noted this weakness in using physical setting choices and argued that human `free will' could be used rigorously to ensure unpredictability in Bell tests. Here we report a set of local-realism tests using human choices, which avoids assumptions about predictability in physics. We recruited about 100,000 human participants to play an online video game that incentivizes fast, sustained input of unpredictable selections and illustrates Bell-test methodology. The participants generated 97,347,490 binary choices, which were directed via a scalable web platform to 12 laboratories on five continents, where 13 experiments tested local realism using photons, single atoms, atomic ensembles, and superconducting devices. Over a 12-hour period on 30 November 2016, participants worldwide provided a sustained data flow of over 1,000 bits per second to the experiments, which used different human-generated data to choose each measurement setting. The observed correlations strongly contradict local realism and other realistic positions in bipartite and tripartite scenarios. Project outcomes include closing the `freedom-of-choice loophole' (the possibility that the setting choices are influenced by `hidden variables' to correlate with the particle properties), the utilization of video-game methods for rapid collection of human generated randomness, and the use of networking techniques for global participation in experimental science.

quant-ph↗

arXiv2018

Microwave cavity detected spin blockade in a few electron double quantum dot

We investigate spin states of few electrons in a double quantum dot by coupling them weakly to a magnetic field resilient NbTiN microwave resonator. We observe a reduced resonator transmission if resonator photons and spin singlet states interact. This response vanishes in a magnetic field once the quantum dot ground state changes from a spin singlet into a spin triplet state. Based on this observation, we map the two-electron singlet-triplet crossover by resonant spectroscopy. By measuring the resonator only, we observe Pauli spin blockade known from transport experiments at finite source-drain bias and detect an unconventional spin blockade triggered by the absorption of resonator photons.

cond-mat.mes-hall↗

arXiv2018

Coherent microwave photon mediated coupling between a semiconductor and a superconductor qubit

Semiconductor qubits rely on the control of charge and spin degrees of freedom of electrons or holes confined in quantum dots (QDs). They constitute a promising approach to quantum information processing [1, 2], complementary to superconducting qubits [3]. Typically, semiconductor qubit-qubit coupling is short range [1, 2, 4, 5], effectively limiting qubit distance to the spatial extent of the wavefunction of the confined particle, which represents a significant constraint towards scaling to reach dense 1D or 2D arrays of QD qubits. Following the success of circuit quantum eletrodynamics [6], the strong coupling regime between the charge [7, 8] and spin [9, 10, 11] degrees of freedom of electrons confined in semiconducting QDs interacting with individual photons stored in a microwave resonator has recently been achieved. In this letter, we demonstrate coherent coupling between a superconducting transmon qubit and a semiconductor double quantum dot (DQD) charge qubit mediated by virtual microwave photon excitations in a tunable high-impedance SQUID array resonator acting as a quantum bus [12, 13, 14]. The transmon-charge qubit coherent coupling rate ($ \sim$ 21 MHz) exceeds the linewidth of both the transmon ($ \sim$ 0.8 MHz) and the DQD charge ($ \sim$ 3 MHz) qubit. By tuning the qubits into resonance for a controlled amount of time, we observe coherent oscillations between the constituents of this hybrid quantum system. These results enable a new class of experiments exploring the use of the two-qubit interactions mediated by microwave photons to create entangled states between semiconductor and superconducting qubits. The methods and techniques presented here are transferable to QD devices based on other material systems and can be beneficial for spin-based hybrid systems.

quant-ph↗

arXiv2018

Observation of topological Uhlmann phases with superconducting qubits

Topological insulators and superconductors at finite temperature can be characterized by the topological Uhlmann phase. However, a direct experimental measurement of this invariant has remained elusive in condensed matter systems. Here, we report a measurement of the topological Uhlmann phase for a topological insulator simulated by a system of entangled qubits in the IBM Quantum Experience platform. By making use of ancilla states, otherwise unobservable phases carrying topological information about the system become accessible, enabling the experimental determination of a complete phase diagram including environmental effects. We employ a state-independent measurement protocol which does not involve prior knowledge of the system state. The proposed measurement scheme is extensible to interacting particles and topological models with a large number of bands.

quant-ph↗

arXiv2018

Floquet spectroscopy of a strongly driven quantum dot charge qubit with a microwave resonator

We experimentally investigate a strongly driven GaAs double quantum dot charge qubit weakly coupled to a superconducting microwave resonator. The Floquet states emerging from strong driving are probed by tracing the qubit - resonator resonance condition. This way we probe the resonance of a qubit that is driven in an adiabatic, a non-adiabatic, or an intermediate rate showing distinct quantum features of multi-photon processes and Landau-Zener-Stückelberg interference pattern. Our resonant detection scheme enables the investigation of novel features when the drive frequency is comparable to the resonator frequency. Models based on adiabatic approximation, rotating wave approximation, and Floquet theory explain our experimental observations.

cond-mat.mes-hall↗

arXiv2017

Applying Electric and Magnetic Field Bias in a 3D Superconducting Waveguide Cavity with High Quality Factor

Three-dimensional microwave waveguide cavities are essential tools for many cavity quantum electrodynamics experiments. However, the need to control quantum emitters with dc magnetic fields inside the cavity often limits such experiments to normal-conducting cavities with relatively low quality factors of about $10^4$. Similarly, controlling quantum emitters with dc electric fields in normal- and superconducting waveguide cavities has so far been difficult, because the insertion of dc electrodes has strongly limited the quality factor. Here, we present a method to apply dc electric fields within a superconducting waveguide cavity, which is based on the insertion of dc electrodes at the nodes of the microwave electric field. Moreover, we present a method to apply dc magnetic fields within the same cavity by trapping the magnetic flux in holes positioned in facing walls of the cavity. We demonstrate that the $\text{TE}_{301}$ mode of such a superconducting, rectangular cavity made from niobium maintains a high internal quality factor of $Q_{\text{int}} \sim 1.7 \cdot 10^6$ at the few photon level and a base temperature of $3~\text{K}$. A cloud of Rydberg atoms coupled to the microwave electric field of the cavity is used to probe the applied dc electric and magnetic fields via the quadratic Stark effect and the Zeeman effect, respectively.

quant-ph↗

arXiv2017

Coherent spin-qubit photon coupling

Electron spins hold great promise for quantum computation due to their long coherence times. An approach to realize interactions between distant spin-qubits is to use photons as carriers of quantum information. We demonstrate strong coupling between single microwave photons in a NbTiN high impedance cavity and a three-electron spin-qubit in a GaAs triple quantum dot. We resolve the vacuum Rabi mode splitting with a coupling strength of $g/2π\simeq31$ MHz and a qubit decoherence of $γ_2/2π\simeq 20$ MHz. We can tune the decoherence electrostatically and obtain a minimal $γ_2/2π\simeq 10$ MHz for $g/2π\simeq 23$ MHz. The dependence of the qubit-photon coupling strength on the tunable electric dipole moment of the qubit is measured directly using the ac Stark effect. Our demonstration of strong spin-photon interaction is an important step towards coherent long-distance coupling of spin-qubits.

cond-mat.mes-hall↗

arXiv2017

All-Microwave Control and Dispersive Readout of Gate-Defined Quantum Dot Qubits in Circuit Quantum Electrodynamics

Developing fast and accurate control and readout techniques is an important challenge in quantum information processing with semiconductor qubits. Here, we study the dynamics and the coherence properties of a GaAs/AlGaAs double quantum dot (DQD) charge qubit strongly coupled to a high-impedance SQUID array resonator. We drive qubit transitions with synthesized microwave pulses and perform qubit readout through the state dependent frequency shift imparted by the qubit on the dispersively coupled resonator. We perform Rabi oscillation, Ramsey fringe, energy relaxation and Hahn-echo measurements and find significantly reduced decoherence rates down to $γ_2/2π\sim 3\,\rm{MHz}$ corresponding to coherence times of up to $T_2 \sim 50 \, \rm{ns}$ for charge states in gate defined quantum dot qubits.

quant-ph↗

arXiv2017

Measuring the polarization of electromagnetic fields using Rabi-rate measurements with spatial resolution: experiment and theory

When internal states of atoms are manipulated using coherent optical or radio-frequency (RF) radiation, it is essential to know the polarization of the radiation with respect to the quantization axis of the atom. We first present a measurement of the two-dimensional spatial distribution of the electric-field amplitude of a linearly-polarized pulsed RF electric field at $\sim 25.6\,$GHz and its angle with respect to a static electric field. The measurements exploit coherent population transfer between the $35$s and $35$p Rydberg states of helium atoms in a pulsed supersonic beam. Based on this experimental result, we develop a general framework in the form of a set of equations relating the five independent polarization parameters of a coherently oscillating field in a fixed laboratory frame to Rabi rates of transitions between a ground and three excited states of an atom with arbitrary quantization axis. We then explain how these equations can be used to fully characterize the polarization in a minimum of five Rabi rate measurements by rotation of an external bias-field, or, knowing the polarization of the driving field, to determine the orientation of the static field using two measurements. The presented technique is not limited to Rydberg atoms and RF fields but can also be applied to characterize optical fields. The technique has potential for sensing the spatiotemporal properties of electromagnetic fields, e.g., in metrology devices or in hybrid experiments involving atoms close to surfaces.

physics.atom-ph↗

arXiv2017

Realizing Rapid, High-Fidelity, Single-Shot Dispersive Readout of Superconducting Qubits

The speed of quantum gates and measurements is a decisive factor for the overall fidelity of quantum protocols when performed on physical qubits with finite coherence time. Reducing the time required to distinguish qubit states with high fidelity is therefore a critical goal in quantum information science. The state-of-the-art readout of superconducting qubits is based on the dispersive interaction with a readout resonator. Here, we bring this technique to its current limit and demonstrate how the careful design of system parameters leads to fast and high-fidelity measurements without affecting qubit coherence. We achieve this result by increasing the dispersive interaction strength, by choosing an optimal linewidth of the readout resonator, by employing a Purcell filter, and by utilizing phase-sensitive parametric amplification. In our experiment, we measure 98.25% readout fidelity in only 48 ns, when minimizing read-out time, and 99.2% in 88 ns, when maximizing the fidelity, limited predominantly by the qubit lifetime of 7.6 us. The presented scheme is also expected to be suitable for integration into a multiplexed readout architecture.

quant-ph↗

arXiv2017

Measuring the dispersive frequency shift of a rectangular microwave cavity induced by an ensemble of Rydberg atoms

In recent years the interest in studying interactions of Rydberg atoms or ensembles thereof with optical and microwave frequency fields has steadily increased, both in the context of basic research and for potential applications in quantum information processing. We present measurements of the dispersive interaction between an ensemble of helium atoms in the 37s Rydberg state and a single resonator mode by extracting the amplitude and phase change of a weak microwave probe tone transmitted through the cavity. The results are in quantitative agreement with predictions made on the basis of the dispersive Tavis-Cummings Hamiltonian. We study this system with the goal of realizing a hybrid between superconducting circuits and Rydberg atoms. We measure maximal collective coupling strengths of 1 MHz, corresponding to 3*10^3 Rydberg atoms coupled to the cavity. As expected, the dispersive shift is found to be inversely proportional to the atom-cavity detuning and proportional to the number of Rydberg atoms. This possibility of measuring the number of Rydberg atoms in a nondestructive manner is relevant for quantitatively evaluating scattering cross sections in experiments with Rydberg atoms.

quant-ph↗

arXiv2016

Characterizing the attenuation of coaxial and rectangular microwave-frequency waveguides at cryogenic temperatures

Low-loss waveguides are required for quantum communication at distances beyond the chip-scale for any low-temperature solid-state implementation of quantum information processors. We measure and analyze the attenuation constant of commercially available microwave-frequency waveguides down to millikelvin temperatures and single photon levels. More specifically, we characterize the frequency-dependent loss of a range of coaxial and rectangular microwave waveguides down to $0.005\,\rm{dB}/\rm{m}$ using a resonant-cavity technique. We study the loss tangent and relative permittivity of commonly used dielectric waveguide materials by measurements of the internal quality factors and their comparison with established loss models. The results of our characterization are relevant for accurately predicting the signal levels at the input of cryogenic devices, for reducing the loss in any detection chain, and for estimating the heat load induced by signal dissipation in cryogenic systems.

cond-mat.mes-hall↗

arXiv2016

Switching off energy decay channels in nanomechanical resonators

Energy decay plays a central role in a wide range of phenomena, such as optical emission, nuclear fission, and dissipation in quantum systems. Energy decay is usually described as a system leaking energy irreversibly into an environmental bath. Here, we report on energy decay measurements in nanomechanical systems based on multi-layer graphene that cannot be explained by the paradigm of a system directly coupled to a bath. As the energy of a vibrational mode freely decays, the rate of energy decay switches abruptly to a lower value. This finding can be explained by a model where the measured mode hybridizes with other modes of the resonator at high energy. Below a threshold energy, modes are decoupled, resulting in comparatively low decay rates and giant quality factors exceeding 1 million. Our work opens up new possibilities to manipulate vibrational states, engineer hybrid states with mechanical modes at completely different frequencies, and to study the collective motion of this highly tunable system.

cond-mat.mes-hall↗