arXiv subjects

A. Wright

Publications and source records attributed to A. Wright.

At least 19 recordsLinked to original sources

arXiv2025

Calibration Plan for the SBC 10-kg Liquid Argon Detector with 100 eV Target Threshold

The Scintillating Bubble Chamber (SBC) Collaboration is designing a new generation of low background, noble liquid bubble chamber experiments with sub-keV nuclear recoil threshold. These experiments combine the electronic recoil blindness of a bubble chamber with the energy resolution of noble liquid scintillation, and maintain electron recoil discrimination at higher degrees of superheat (lower nuclear recoil thresholds) than Freon-based bubble chambers. A 10-kg liquid argon bubble chamber has the potential to set world leading limits on the dark matter nucleon cross-section for $O(\mathrm{GeV}/c^{2})$ masses, and to perform a high statistics coherent elastic neutrino nuclear scattering measurement with reactor neutrinos. This work presents a detailed calibration plan to measure the detector response of these experiments, combining photoneutron scattering with two new techniques to induce sub-keV nuclear recoils: nuclear Thomson scattering and thermal neutron capture.

physics.ins-det↗

arXiv2025

Multi-functional Wafer-Scale Van der Waals Heterostructures and Polymorphs

Van der Waals heterostructures have promised the realisation of artificial materials with multiple physical phenomena such as giant optical nonlinearities, spin-to-charge interconversion in spintronics and topological carrier protection, in a single layered device through an infinitely diverse set of quantum materials. However, most efforts have only focused on exfoliated material that inherently limits both the dimensions of the materials and the scalability for applications. Here, we show the epitaxial growth of large area heterostructures of topological insulators (Bi2Se3), transition metal dichalcogenides (TMDs, WSe2) and ferromagnets (Co), resulting in the combination of functionalities including tuneable optical nonlinearities, spin-to-charge conversion and magnetic proximity effects. This is demonstrated through coherent phase resolved terahertz currents, bringing novel functionalities beyond those achievable in simple homostructures. In particular, we show the role of different TMD polymorphs, with the simple change of one atomic monolayer of the artificial material stack entirely changing its optical, electrical and magnetic properties. This epitaxial integration of diverse two-dimensional materials offers foundational steps towards diverse perspectives in quantum material engineering, where the material polymorph can be controlled at technological relevant scales for coupling applications in, for example, van der Waals nonlinear optics, optoelectronics, spintronics, multiferroics and coherent current control.

cond-mat.mtrl-sci↗

arXiv2025

Monolayer control of spin-charge conversion in van der Waals heterostructures

The diversity of 2D materials and their van der Waals (vdW) stacking presents a fertile ground for engineering novel multifunctional materials and quantum states of matter. This permits unique opportunities to tailor the electronic properties of vdW heterostructures by the insertion of only a single 2D material layer. However, such vdW materials engineering at the atomic scale has yet to be investigated for spin-charge interconversion phenomena. Here, we report on the control of these effects at the monolayer level, where drastic increase in intensity and change in sign of THz spintronic emission are demonstrated by inserting a single layer of MoSe$_2$ between PtSe$_2$ and graphene in a fully epitaxial, large area stacked structure. By using a combination of spin and angle resolved photoemission and density functional theory to reveal the electronic and spin structures, we illustrate two different mechanisms relying on charge transfer and electronic hybridization for the formation of Rashba states, which are responsible for spin-charge conversion and hence the THz spintronic emission. These findings open new pathways to design, at the atomic scale, efficient THz spintronic emitters made of 2D materials and other spintronic devices based on spin-charge interconversion phenomena.

cond-mat.mtrl-sci↗

arXiv2024

Low-threshold response of a scintillating xenon bubble chamber to nuclear and electronic recoils

A device filled with pure xenon first demonstrated the ability to operate simultaneously as a bubble chamber and scintillation detector in 2017. Initial results from data taken at thermodynamic thresholds down to ~4 keV showed sensitivity to ~20 keV nuclear recoils with no observable bubble nucleation by $\gamma$-ray interactions. This paper presents results from further operation of the same device at thermodynamic thresholds as low as 0.50 keV, hardware limited. The bubble chamber has now been shown to have sensitivity to ~1 keV nuclear recoils while remaining insensitive to bubble nucleation by $\gamma$-rays. A robust calibration of the chamber's nuclear recoil nucleation response, as a function of nuclear recoil energy and thermodynamic state, is presented. Stringent upper limits are established for the probability of bubble nucleation by $\gamma$-ray-induced Auger cascades, with a limit of $<1.1\times10^{-6}$ set at 0.50 keV, the lowest thermodynamic threshold explored.

physics.ins-det↗

arXiv2024

Batch VUV4 Characterization for the SBC-LAr10 scintillating bubble chamber

The Scintillating Bubble Chamber (SBC) collaboration purchased 32 Hamamatsu VUV4 silicon photomultipliers (SiPMs) for use in SBC-LAr10, a bubble chamber containing 10~kg of liquid argon. A dark-count characterization technique, which avoids the use of a single-photon source, was used at two temperatures to measure the VUV4 SiPMs breakdown voltage ($V_{\text{BD}}$), the SiPM gain ($g_{\text{SiPM}}$), the rate of change of $g_{\text{SiPM}}$ with respect to voltage ($m$), the dark count rate (DCR), and the probability of a correlated avalanche (P$_{\text{CA}}$) as well as the temperature coefficients of these parameters. A Peltier-based chilled vacuum chamber was developed at Queen's University to cool down the Quads to $233.15\pm0.2$~K and $255.15\pm0.2$~K with average stability of $\pm20$~mK. An analysis framework was developed to estimate $V_{\text{BD}}$ to tens of mV precision and DCR close to Poissonian error. The temperature dependence of $V_{\text{BD}}$ was found to be $56\pm2$~mV~K$^{-1}$, and $m$ on average across all Quads was found to be $(459\pm3(\rm{stat.})\pm23(\rm{sys.}))\times 10^{3}~e^-$~PE$^{-1}$~V$^{-1}$. The average DCR temperature coefficient was estimated to be $0.099\pm0.008$~K$^{-1}$ corresponding to a reduction factor of 7 for every 20~K drop in temperature. The average temperature dependence of P$_{\text{CA}}$ was estimated to be $4000\pm1000$~ppm~K$^{-1}$. P$_{\text{CA}}$ estimated from the average across all SiPMs is a better estimator than the P$_{\text{CA}}$ calculated from individual SiPMs, for all of the other parameters, the opposite is true. All the estimated parameters were measured to the precision required for SBC-LAr10, and the Quads will be used in conditions to optimize the signal-to-noise ratio.

physics.ins-det↗

arXiv2024

Chemical Classification of Spherules Recovered From The Pacific Ocean Site of The CNEOS 2014-01-08 (IM1) Bolide

We have conducted an extensive towed-magnetic-sled survey during the period of June 14-28, 2023, over the seafloor about 85 km north of Manus Island, Papua New Guinea, centered around the calculated path of the bolide CNEOS 2014-01-08 (IM1). We found about 850 spherules of diameter 0.1-1.3 millimeters in our samples. The samples were analyzed by micro-XRF, Electron Probe Microanalyzer and ICP Mass spectrometry. Here we report major and trace element compositions of the samples and classify spherules based on that analysis. Spherules comprising 22% of the collection, appear to all reflect planetary igneous differentiation and are all different from previously described spherules. A subset of the differentiated-spherules show an excess of Be, La and U, by up to three orders of magnitude relative to the solar system standard of CI chondrites. Detailed mass spectrometry of 12 of these "BeLaU"-type spherules, the population of which may constitute up to ~10% of our entire collected sample, suggests that they are derived from material formed by planetary igneous fractionation. Their chemical composition is unlike any known solar system material. The "BeLaU"-type spherules reflect a highly differentiated, extremely evolved composition of an unknown source.

astro-ph.EP↗

arXiv2023

Atomic-layer controlled THz Spintronic emission from Epitaxially grown Two dimensional PtSe$_2$/ferromagnet heterostructures

Terahertz (THz) Spintronic emitters based on ferromagnetic/metal junctions have become an important technology for the THz range, offering powerful and ultra-large spectral bandwidths. These developments have driven recent investigations of two-dimensional (2D) materials for new THz spintronic concepts. 2D materials, such as transition metal dichalcogenides (TMDs), are ideal platforms for SCC as they possess strong spin-orbit coupling (SOC) and reduced crystal symmetries. Moreover, SCC and the resulting THz emission can be tuned with the number of layers, electric field or strain. Here, epitaxially grown 1T-PtSe$_2$ and sputtered Ferromagnet (FM) heterostructures are presented as a novel THz emitter where the 1T crystal symmetry and strong SOC favor SCC. High quality of as-grown PtSe$_2$ layers is demonstrated and further FM deposition leaves the PtSe$_2$ unaffected, as evidenced with extensive characterization. Through this atomic growth control, the unique thickness dependent electronic structure of PtSe$_2$ allows the control of the THz emission by SCC. Indeed, we demonstrate the transition from the inverse Rashba-Edelstein effect in one monolayer to the inverse spin Hall effect in multilayers. This band structure flexibility makes PtSe$_2$ an ideal candidate as a THz spintronic 2D material and to explore the underlying mechanisms and engineering of the SCC for THz emission.

cond-mat.mtrl-sci↗

arXiv2022

A Method to Load Tellurium in Liquid Scintillator for the Study of Neutrinoless Double Beta Decay

A method has been developed to load tellurium into liquid scintillator so as to permit searches for neutrinoless double beta decay with high sensitivity. The approach involves the synthesis of an oil-soluble tellurium compound from telluric acid and an organic diol. The process utilises distillable chemicals that can be safely handled underground and affords low radioactive backgrounds, low optical absorption and high light yields at loading levels of at least several percent Te by weight.

physics.ins-det↗

arXiv2019

The frequency of dust lanes in edge-on spiral galaxies identified by Galaxy Zoo in KiDS imaging of GAMA targets

Dust lanes bisect the plane of a typical edge-on spiral galaxy as a dark optical absorption feature. Their appearance is linked to the gravitational stability of spiral disks; the fraction of edge-on galaxies that displays a dust lane is a direct indicator of the typical vertical balance between gravity and turbulence; a balance struck between the energy input from star-formation and the gravitational pull into the plane of the disk. Based on morphological classifications by the Galaxy~Zoo project on the Kilo-Degree Survey (KiDS) imaging data in the Galaxy and Mass Assembly (GAMA) fields, we explore the relation of dust lanes to the galaxy characteristics, most of which were determined using the {\sc magphys} spectral energy distribution fitting tool: stellar mass, total and specific star-formation rates, and several parameters describing the cold dust component. We find that the fraction of dust lanes does depend on the stellar mass of the galaxy; they start to appear at $M^* \sim 10^9 M_\odot$. A dust lane also implies strongly a dust mass of at least $10^5 M_\odot$, but otherwise does not correlate with cold dust mass parameters of the {\sc magphys} spectral energy distribution analysis, nor is there a link with star-formation rate, specific or total. Dust lane identification does not depend on disk ellipticity (disk thickness) or Sersic profile but correlates with bulge morphology; a round bulge favors dust lane votes. The central component along the line of sight that produces the dust lane is not associated with either one of the components fit by {\sc magphys}, the cold diffuse component or the localized, heated component in HII regions, but a mix of these two.

astro-ph.GA↗

arXiv2018

Neutron detection in the SNO+ water phase

SNO+ is a multipurpose neutrino experiment located approximately 2 km underground in SNOLAB, Sudbury, Canada. The detector started taking physics data in May 2017 and is currently completing its first phase, as a pure water Cherenkov detector. The low trigger threshold of the SNO+ detector allows for a substantial neutron detection efficiency, as observed with a deployed ^{241}Am^{9}Be source. Using a statistical analysis of one hour AmBe calibration data, we report a neutron capture constant of 208.2 + 2.1(stat.) us and a lower bound of the neutron detection efficiency of 46% at the center of the detector.

physics.ins-det↗

arXiv2017

A deep Parkes HI survey of the Sculptor group and filament: HI mass function and environment

We present the results of a deep survey of the nearby Sculptor group and the associated Sculptor filament taken with the Parkes 64-m radio telescope in the 21-cm emission line of neutral hydrogen. We detect 31 HI sources in the Sculptor group/filament, eight of which are new HI detections. We derive a slope of the HI mass function along the Sculptor filament of $α= -1.10^{+0.20}_{-0.11}$, which is significantly flatter than the global mass function and consistent with the flat slopes previously found in other low-density group environments. Some physical process, such as star formation, photoionisation or ram-pressure stripping, must therefore be responsible for removing neutral gas predominantly from low-mass galaxies. All of our HI detections have a confirmed or tentative optical counterpart and are likely associated with luminous rather than 'dark' galaxies. Despite a column density sensitivity of about $4 \times 10^{17}~\mathrm{cm}^{-2}$, we do not find any traces of extragalactic gas or tidal streams, suggesting that the Sculptor filament is, at the current time, a relatively quiescent environment that has not seen any recent major interactions or mergers.

astro-ph.GA↗

arXiv2017

Galaxy And Mass Assembly: The 1.4GHz SFR indicator, SFR-M* relation and predictions for ASKAP-GAMA

We present a robust calibration of the 1.4GHz radio continuum star formation rate (SFR) using a combination of the Galaxy And Mass Assembly (GAMA) survey and the Faint Images of the Radio Sky at Twenty-cm (FIRST) survey. We identify individually detected 1.4GHz GAMA-FIRST sources and use a late-type, non-AGN, volume-limited sample from GAMA to produce stellar mass-selected samples. The latter are then combined to produce FIRST-stacked images. This extends the robust parametrisation of the 1.4GHz-SFR relation to faint luminosities. For both the individually detected galaxies and our stacked samples, we compare 1.4GHz luminosity to SFRs derived from GAMA to determine a new 1.4GHz luminosity-to-SFR relation with well constrained slope and normalisation. For the first time, we produce the radio SFR-M* relation over 2 decades in stellar mass, and find that our new calibration is robust, and produces a SFR-M* relation which is consistent with all other GAMA SFR methods. Finally, using our new 1.4GHz luminosity-to-SFR calibration we make predictions for the number of star-forming GAMA sources which are likely to be detected in the upcoming ASKAP surveys, EMU and DINGO.

astro-ph.GA↗

arXiv2016

Measurement of $α$-particle quenching in LAB based scintillator in independent small-scale experiments

The $α$-particle light response of liquid scintillators based on linear alkylbenzene (LAB) has been measured with three different experimental approaches. In the first approach, $α$-particles were produced in the scintillator via $^{12}$C($n$,$α$)$^9$Be reactions. In the second approach, the scintillator was loaded with 2% of $^{\mathrm{nat}}$Sm providing an $α$-emitter, $^{147}$Sm, as an internal source. In the third approach, a scintillator flask was deployed into the water-filled SNO+ detector and the radioactive contaminants $^{222}$Rn, $^{218}$Po and $^{214}$Po provided the $α$-particle signal. The behavior of the observed $α$-particle light outputs are in agreement with each case successfully described by Birks' law. The resulting Birks parameter $kB$ ranges from $(0.0066\pm0.0016)$ cm/MeV to $(0.0076\pm0.0003)$ cm/MeV. In the first approach, the $α$-particle light response was measured simultaneously with the light response of recoil protons produced via neutron-proton elastic scattering. This enabled a first time a direct comparison of $kB$ describing the proton and the $α$-particle response of LAB based scintillator. The observed $kB$ values describing the two light response functions deviate by more than $5σ$. The presented results are valuable for all current and future detectors, using LAB based scintillator as target, since they depend on an accurate knowledge of the scintillator response to different particles.

physics.ins-det↗

arXiv2015

Low-energy (anti)neutrino physics with Borexino: Neutrinos from the primary proton-proton fusion process in the Sun

The Sun is fueled by a series of nuclear reactions that produce the energy that makes it shine. The primary reaction is the fusion of two protons into a deuteron, a positron and a neutrino. These neutrinos constitute the vast majority of neutrinos reaching Earth, providing us with key information about what goes on at the core of our star. Several experiments have now confirmed the observation of neutrino oscillations by detecting neutrinos from secondary nuclear processes in the Sun; this is the first direct spectral measurement of the neutrinos from the keystone proton-proton fusion. This observation is a crucial step towards the completion of the spectroscopy of pp-chain neutrinos, as well as further validation of the LMA-MSW model of neutrino oscillations.

hep-ex↗

arXiv2015

A New Diagnostic of Magnetic Field Strengths in Radiatively-Cooled Shocks

We show that it is possible to measure Alfvénic Mach numbers, defined as the shock velocity in the flow divided by the Alfvén velocity, for low-velocity (V$_{shock}$ $\lesssim$ 100 km$\,$s$^{-1}$) radiative shocks. The method combines observations of bright forbidden lines with a measure of the size of the cooling zone, the latter typically obtained from spatial separation between the Balmer emission lines and the forbidden lines. Because magnetic fields become compressed as gas in the postshock region cools, even relatively weak preshock magnetic fields can be detected with this method. We derive analytical formulae that explain how the spatial separations relate to emission-line ratios, and compute a large grid of radiatively-cooled shock models to develop diagnostic diagrams that can be used to derive Alfvénic Mach numbers in flows. Applying the method to existing data for a bright knot in the HH 111 jet, we obtain a relatively low Alfvénic Mach number of $\sim$ 2, indicative of a magnetized jet that has super-magnetosonic velocity perturbations within it.

astro-ph.IM↗

arXiv2014

Solar neutrino with Borexino: results and perspectives

Borexino is a unique detector able to perform measurement of solar neutrinos fluxes in the energy region around 1 MeV or below due to its low level of radioactive background. It was constructed at the LNGS underground laboratory with a goal of solar $^{7}$Be neutrino flux measurement with 5\% precision. The goal has been successfully achieved marking the end of the first stage of the experiment. A number of other important measurements of solar neutrino fluxes have been performed during the first stage. Recently the collaboration conducted successful liquid scintillator repurification campaign aiming to reduce main contaminants in the sub-MeV energy range. With the new levels of radiopurity Borexino can improve existing and challenge a number of new measurements including: improvement of the results on the Solar and terrestrial neutrino fluxes measurements; measurement of pp and CNO solar neutrino fluxes; search for non-standard interactions of neutrino; study of the neutrino oscillations on the short baseline with an artificial neutrino source (search for sterile neutrino) in context of SOX project.

physics.ins-det↗

arXiv2014

Recent Borexino results and prospects for the near future

The Borexino experiment, located in the Gran Sasso National Laboratory, is an organic liquid scintillator detector conceived for the real time spectroscopy of low energy solar neutrinos. The data taking campaign phase I (2007 - 2010) has allowed the first independent measurements of 7Be, 8B and pep fluxes as well as the first measurement of anti-neutrinos from the earth. After a purification of the scintillator, Borexino is now in phase II since 2011. We review here the recent results achieved during 2013, concerning the seasonal modulation in the 7Be signal, the study of cosmogenic backgrounds and the updated measurement of geo-neutrinos. We also review the upcoming measurements from phase II data (pp, pep, CNO) and the project SOX devoted to the study of sterile neutrinos via the use of a 51Cr neutrino source and a 144Ce-144Pr antineutrino source placed in close proximity of the active material.

hep-ex↗

arXiv2014

Final results of Borexino Phase-I on low energy solar neutrino spectroscopy

Borexino has been running since May 2007 at the LNGS with the primary goal of detecting solar neutrinos. The detector, a large, unsegmented liquid scintillator calorimeter characterized by unprecedented low levels of intrinsic radioactivity, is optimized for the study of the lower energy part of the spectrum. During the Phase-I (2007-2010) Borexino first detected and then precisely measured the flux of the 7Be solar neutrinos, ruled out any significant day-night asymmetry of their interaction rate, made the first direct observation of the pep neutrinos, and set the tightest upper limit on the flux of CNO neutrinos. In this paper we discuss the signal signature and provide a comprehensive description of the backgrounds, quantify their event rates, describe the methods for their identification, selection or subtraction, and describe data analysis. Key features are an extensive in situ calibration program using radioactive sources, the detailed modeling of the detector response, the ability to define an innermost fiducial volume with extremely low background via software cuts, and the excellent pulse-shape discrimination capability of the scintillator that allows particle identification. We report a measurement of the annual modulation of the 7 Be neutrino interaction rate. The period, the amplitude, and the phase of the observed modulation are consistent with the solar origin of these events, and the absence of their annual modulation is rejected with higher than 99% C.L. The physics implications of phase-I results in the context of the neutrino oscillation physics and solar models are presented.

hep-ex↗